3-dimensional (orthogonal) structural complexity of time-series data using low-order moment analysis

3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication-A Review

artículo científico publicado en 2020

A Comparison between Gas and Atomized Liquid Precursor States in the Deposition of Functional Coatings by Pin Corona Plasma

A normal coordinate analysis of monomethylhydrazine and its bidentate nickel (II) chloride complex

scholarly article by D.P. Dowling et al published January 1988 in Spectrochimica acta. Part A: Molecular spectroscopy

Achieving enhanced DSSC performance by microwave plasma incorporation of carbon into TiO2 photoelectrodes

Achieving enhanced material finishing using cold plasma treatments

Additive manufacturing of woven carbon fibre polymer composites

Adhesion and composite micro-hardness of DLC and Si-DLC films deposited on nitrile rubber

Adhesion of slime producing Staphylococcus epidermidis strains to PVC and diamond-like carbon/silver/fluorinated coatings.

artículo científico publicado en 2006

Adhesion performance of TiN coating with amorphous NiTi alloy interlayer onto 316L stainless biosteel deposited by sputtering process

Advanced diamond-reinforced metal matrix composites via cold spray: Properties and deposition mechanism

Air based atmospheric pressure plasma jet removal of FreKote 710-NC prior to composite-to-composite adhesive bonding

Anti-bacterial silver coatings exhibiting enhanced activity through the addition of platinum

article

Application of a novel microwave plasma treatment for the sintering of nickel oxide coatings for use in dye-sensitized solar cells

scholarly article by Muhammad Awais et al published July 2011 in Surface & Coatings Technology

Application of additive manufacturing in design & manufacturing engineering education

Asymmetry of ‘valence’ and ‘conduction’ Gaussian π bands in a-C:H and a-C thin films and its origin

Atmospheric Pressure Plasma Acoustic Moment Analysis

Atomistic Simulation of the Formation of Nanoporous Silica Films via Molecular Chemical Vapor Deposition on Nonporous Substrates

artículo científico publicado en 2011

Biological responses to hydroxyapatite surfaces deposited via a co-incident microblasting technique

artículo científico publicado en 2009

Biosensor based on laccase immobilized on plasma polymerized allylamine/carbon electrode

artículo científico publicado en 2013

Cellular and transcriptomic analysis of human mesenchymal stem cell response to plasma-activated hydroxyapatite coating

artículo científico publicado en 2011

Characteristics and tribological performance of DLC and Si-DLC films deposited on nitrile rubber

Characterization study of diamond and diamond-like carbon

Cold spray deposition to prevent fouling of polymer surfaces

Cold spraying of WC-Co-Ni coatings using porous WC-17Co powders: Formation mechanism, microstructure characterization and tribological performance

article published in 2017

Comparing Deposition Properties in an Atmospheric Pressure Plasma System Operating in Uniform and Nonuniform Modes

Comparison between acid leaching and siliciding pre-treatments on the erosive wear performance of diamond coatings on cemented carbide substrates

Comparison of pilot and industrial scale atmospheric pressure glow discharge systems including a novel electro-acoustic technique for process monitoring

article by J Tynan et al published 21 December 2009 in Plasma Sources Science and Technology

Comparison of the photoelectrochemical properties of RDS NiO thin films for p-type DSCs with different organic and organometallic dye-sensitizers and evidence of a direct correlation between cell efficiency and charge recombination

Comparison of thermal and microwaveassisted plasma sintering of nickel–diamond composites

scholarly article by Barry Twomey et al published September 2010 in Powder Metallurgy

Continuously deposited duplex biomedical coatings

Conversion of amorphous TiO2 coatings into their crystalline form using a novel microwave plasma treatment

Converting a Microwave Oven into a Plasma Reactor: A Review

Correlation of molecular hydrogen dissociation and the film quality of diamondlike carbon in plasma enhanced chemical vapor deposition

DC Pulsed Atmospheric-Pressure Plasma Jet Image Information

Deposition and characterization of NiOx coatings by magnetron sputtering for application in dye-sensitized solar cells

Deposition of Hybrid Organic–Inorganic Composite Coatings Using an Atmospheric Plasma Jet System

artículo científico publicado en 2011

Deposition of Non-Fouling PEO-Like Coatings Using a Low Temperature Atmospheric Pressure Plasma Jet

Deposition of anti-bacterial silver coatings on polymeric substrates

Deposition of magnetron sputtered TiN+MoSx coating with Ti–TiN graded interlayer

Determination of the optimum TiN coating thickness on WC inserts for machining carbon steels

article published in 2004

Development of active packaging containing natural antioxidants

artículo científico publicado en 2004

Diagnostics of an O2–He RF Atmospheric Plasma Discharge by Spectral Emission

Diamond deposition using a novel microwave applicator

Diamond deposition using a novel microwave applicator

Differential Sensitivity of Mammalian Cell Lines to Non-Thermal Atmospheric Plasma

Diffusion within Ultrathin, Dense Nanoporous Silica Films

artículo científico publicado en 2011

Dye sensitised solar cells with nickel oxide photocathodes prepared via scalable microwave sintering

artículo científico publicado en 2013

Effect of Doping (C or N) and Co-Doping (C+N) on the Photoactive Properties of Magnetron Sputtered Titania Coatings for the Application of Solar Water-Splitting

artículo científico publicado en 2012

Effect of Plasma Exposure on the Chemistry and Morphology of Aerosol-Assisted, Plasma-Deposited Coatings

Effect of an Atmospheric Pressure Plasma Treatment on the Mode I Fracture Toughness of a Co-Cured Composite Joint

Effect of an active packaging with citrus extract on lipid oxidation and sensory quality of cooked turkey meat.

artículo científico publicado en 2013

Effect of process parameters on chemistry, growth rate and nano-sized particulate formation of atmospheric plasma deposited, nm thick siloxane coatings.

artículo científico publicado en 2009

Effect of surface wettability and topography on the adhesion of osteosarcoma cells on plasma-modified polystyrene

artículo científico publicado en 2010

Electrochemical Characterization of Nanoporous Nickel Oxide Thin Films Spray-Deposited onto Indium-Doped Tin Oxide for Solar Conversion Scopes

scholarly article by Muhammad Awais et al published 2015 in Advances in Condensed Matter Physics

Electrochemical characterization of NiO electrodes deposited via a scalable powder microblasting technique

article published in 2013

Enhancing polymer adhesion through surface activation using an in-line atmospheric pressure plasma

Enhancing the mechanical performance of additive manufactured polymer components using atmospheric plasma pre-treatments

article published in 2017

Evaluation of Cell Behaviour on Atmospheric Plasma Deposited Siloxane and Fluorosiloxane Coatings

Evaluation of Microwave Plasma Sintering for the Fabrication of Dye Sensitized Solar Cell (DSSC) Electrodes

artículo científico publicado en 2012

Evaluation of a reel-to-reel atmospheric plasma system for the treatment of polymers

Evaluation of microwave plasma oxidation treatments for the fabrication of photoactive un-doped and carbon-doped TiO2 coatings

Evaluation of protein adsorption on atmospheric plasma deposited coatings exhibiting superhydrophilic to superhydrophobic properties.

artículo científico publicado en 2012

Evaluation of real-time non-invasive diagnostic tools for the monitoring of a pilot scale atmospheric pressure plasma system

Evaluation of the Effect of Plasma Treatment Frequency on the Activation of Polymer Particles

Evaluation of the effectiveness of kINPen Med plasma jet and bioactive agent therapy in a rat model of wound healing

Evaluation of the influence of low pressure additive manufacturing processing conditions on printed polymer parts

Evaluation of the mechanical behaviour of nanometre-thick coatings deposited using an atmospheric pressure plasma system

Evaluation of the mechanical performance of polymer parts fabricated using a production scale multi jet fusion printing process

Evaluation of the sensitivity of bacterial and yeast cells to cold atmospheric plasma jet treatments.

artículo científico publicado en 2015

Evaluation of the sensitivity of electro-acoustic measurements for process monitoring and control of an atmospheric pressure plasma jet system

article by V J Law et al published 18 May 2011 in Plasma Sources Science and Technology

Examination of surface properties andin vitro biological performance of amorphous diamond-like carbon-coated polyurethane

scientific article published on 01 August 2006

Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing

Fabrication of nano-structured TiO2 coatings using a microblast deposition technique

First Evidence of Electrode Reconstruction in Mesoporous NiO After Operation as Photocathode of Dye-Sensitized Solar Cells

article

Flexibility and frictional behaviour of DLC and Si-DLC films deposited on nitrile rubber

Generation of Active Species in a Large Atmospheric-Pressure Plasma Jet

High pressure diamond and diamond-like carbon deposition using a microwave CAP reactor

Importance of Plasma Thermal Energy Transfer for Plasma Jet Systems

In vitro and in vivo bioactivity of CoBlast hydroxyapatite coating and the effect of impaction on its osteoconductivity

artículo científico publicado en 2011

Influence of Atmospheric Plasma Source and Gas Composition on the Properties of Deposited Siloxane Coatings

article

Influence of doping on the photoactive properties of magnetron-sputtered titania coatings: Experimental and theoretical study

scholarly article in Physical Review B, vol. 86 no. 11, September 2012

Influence of nm-Thick Atmospheric Plasma Deposited Coatings on the Adhesion of Silicone Elastomer to Stainless Steel

Influence of substrate metal alloy type on the properties of hydroxyapatite coatings deposited using a novel ambient temperature deposition technique

scientific article published on 20 June 2013

Influence of the physical, structural and chemical properties on the photoresponse property of magnetron sputtered TiO2 for the application of water splitting.

artículo científico publicado en 2011

Investigation of a scalable barrel atmospheric plasma reactor for the treatment of polymer particles

Investigation of mechanical properties of TiN+MoSx coating on plasma-nitrided substrate

Investigation of the Effects of Gas versus Liquid Deposition in an Aerosol-Assisted Corona Deposition Process

Limits on the use of cobalt sulfide as anode of p-type dye-sensitized solar cells

scholarly article by Matteo Bonomo et al published 5 May 2017 in Journal of Physics D

Mechanism of action of an antioxidant active packaging prepared with Citrus extract

Metal finishing: enhanced performance achieved through plasma processing

Microwave-assisted rapid discharge sintering of a bioactive glass–ceramic

artículo científico publicado en 2011

Modified drug release using atmospheric pressure plasma deposited siloxane coatings

Novel cold spray for fabricating graphene-reinforced metal matrix composites

Novel, Nanoporous Silica and Titania Layers Fabricated by Magnetron Sputtering

scientific article published on 13 January 2011

Overall Migration and Kinetics of Release of Antioxidant Compounds from Citrus Extract-Based Active Packaging

artículo científico publicado en 2013

PET trays coated with Citrus extract exhibit antioxidant activity with cooked turkey meat

artículo científico publicado en 2012

Photo-active and optical properties of bismuth ferrite (BiFeO3): An experimental and theoretical study

Photoelectrochemical properties of mesoporous NiO x deposited on technical FTO via nanopowder sintering in conventional and plasma atmospheres

artículo científico publicado en 2015

Plasma Hysteresis and Instability: A Memory Perspective

Plasma functionalized carbon electrode for laccase-catalyzed oxygen reduction by direct electron transfer

artículo científico publicado en 2013

Plasma power can slash small run sintering times

Plasmon enhanced fluorescence studies from aligned gold nanorod arrays modified with SiO2 spacer layers

Prediction of tool-wear in turning of medical grade cobalt chromium molybdenum alloy (ASTM F75) using non-parametric Bayesian models

scholarly article by Damien McParland et al published 23 March 2017 in Journal of Intelligent Manufacturing

Predictive modelling of the water contact angle of surfaces using attenuated total reflection – Fourier transform infrared (ATR-FTIR) chemical imaging and partial least squares regression (PLSR)

article

Probing the redox states at the surface of electroactive nanoporous NiO thin films

artículo científico publicado en 2013

Properties of Siloxane Coatings Deposited in a Reel-to-Reel Atmospheric Pressure Plasma System

Quantitative measurements of atomic hydrogen during the deposition of diamond-like carbon films

Raman analysis of DLC and Si-DLC films deposited on nitrile rubber

Rapid Discharge Sintering of Powder Metallurgy Components

Silica nanofilms deposited by atmospheric pressure plasma liquid deposition

Storage Stability of an Antioxidant Active Packaging Coated with Citrus Extract Following a Plasma Jet Pretreatment

Structural and tribological properties of the plasma nitrided Ti-alloy biomaterials: Influence of the treatment temperature

Surface properties of nanostructured NiO undergoing electrochemical oxidation in 3-methoxy-propionitrile

Surface-induced cell signaling events control actin rearrangements and motility.

artículo científico publicado en 2010

Tailoring oxide-layer formation on titanium substrates using microwave plasma treatments

scholarly article by Emmanuel J. Ekoi et al published September 2017 in Surface & Coatings Technology

The Influence of Process Parameters on Chemistry, Roughness and Morphology of Siloxane Films Deposited by an Atmospheric Plasma Jet System

The effect of atomic hydrogen on diamond-like carbon film production

The effect of plasma-polymerised silicon hydride-rich polyhydrogenmethylsiloxane on the adhesion of silicone elastomers

The effect of refractive index on the friction coefficient of DLC coated polymer substrates

The effect of thermal treatments on the tribological properties of PVD hard coatings

Thermal analysis of some methylhydrazine and methylhydrazinium complexes of copper(II), copper(I) and mixed valence species

Thermal stability studies of atmospheric plasma deposited siloxane films deposited on Vycor™ glass

Three-Dimensional Coupled Fluid-Droplet Model for Atmospheric Pressure Plasmas

Two-Dimensional Integrated Model for Interaction of Liquid Droplets with Atmospheric Pressure Plasma

Use of atmospheric plasma jet treatments for the enhancement of cell adhesion to 1 mm internal diameter microwell cell arrays