Lista de obras - José A Heredia-Guerrero

Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties

artículo científico publicado en 2017

Aleuritic (9,10,16-trihydroxypalmitic) acid self-assembly on mica

artículo científico publicado en 2010

Alginate nanofibrous mats with adjustable degradation rate for regenerative medicine

artículo científico publicado en 2015

Antibacterial Melamine Foams Decorated with in Situ Synthesized Silver Nanoparticles

artículo científico publicado en 2018

Antimicrobial, antioxidant, and waterproof RTV silicone-ethyl cellulose composites containing clove essential oil

scientific article published on 18 March 2018

Bio-Based Coatings for Food Metal Packaging Inspired in Biopolyester Plant Cutin

artículo científico publicado en 2020

Bio-based lacquers from industrially processed tomato pomace for sustainable metal food packaging

artículo científico publicado en 2023

Biodegradable and Insoluble Cellulose Photonic Crystals and Metasurfaces

scientific article published on 19 June 2020

Biodegradable polyester films from renewable aleuritic acid: surface modifications induced by melt-polycondensation in air

scholarly article by José Jesús Benítez et al published 1 April 2016 in Journal of Physics D

Biomechanical properties of the tomato (Solanum lycopersicum) fruit cuticle during development are modulated by changes in the relative amounts of its components

artículo científico publicado en 2014

Biomimetic Approach for Liquid Encapsulation with Nanofibrillar Cloaks

artículo científico publicado en 2014

Biomimetic polymers of plant cutin: an approach from molecular modeling

article

CHS silencing suggests a negative cross-talk between wax and flavonoid pathways in tomato fruit cuticle

artículo científico publicado en 2015

Cellulose-polyhydroxylated fatty acid ester-based bioplastics with tuning properties: Acylation via a mixed anhydride system

artículo científico publicado en 2017

Chemical reactions in 2D: self-assembly and self-esterification of 9(10),16-dihydroxypalmitic acid on mica surface.

artículo científico publicado en 2009

Chemical–physical characterization of isolated plant cuticles subjected to low-dose γ-irradiation

article

Cutin from agro-waste as a raw material for the production of bioplastics

artículo científico publicado en 2017

Cutin synthesis: A slippery paradigm

artículo científico publicado en 2009

Direct Transformation of Edible Vegetable Waste into Bioplastics

Effect of trifluoroacetic acid on the properties of polyvinyl alcohol and polyvinyl alcohol–cellulose composites

Electrostatic Induced Molecular Tilting in Self-Assembled Monolayers of n-Octadecylamine on Mica

Facile production of seaweed-based biomaterials with antioxidant and anti-inflammatory activities

Fumarate-loaded electrospun nanofibers with anti-inflammatory activity for fast recovery of mild skin burns.

artículo científico publicado en 2016

Graphene and polytetrafluoroethylene synergistically improve the tribological properties and adhesion of nylon 66 coatings

scholarly article in Carbon, vol. 123, October 2017

Graphene–enhanced differentiation of neuroblastoma mouse cells mediated by poly-D-lysine

artículo científico publicado en 2020

Highly Effective Antiadhesive Coatings from pH-Modified Water-Dispersed Perfluorinated Acrylic Copolymers: The Case of Vulcanizing Rubber

Infrared and Raman spectroscopic features of plant cuticles: a review

artículo científico publicado en 2014

Insolubilization and thermal stabilization of a long-chain polyester by noncatalyzed melt-polycondensation synthesis in air

Long-Chain Polyhydroxyesters from Natural Occurring Aleuritic Acid as Potential Material for Food Packaging

Low-Cost and Effective Fabrication of Biocompatible Nanofibers from Silk and Cellulose-Rich Materials

Multifunctional Bioplastics Inspired by Wood Composition: Effect of Hydrolyzed Lignin Addition to Xylan-Cellulose Matrices

scientific article published on 24 January 2020

New insights into the properties of pubescent surfaces: peach fruit as a model

artículo científico publicado en 2011

Omniphobic nanocomposite fiber mats with peel-away self similarity

Packing Defects in Fatty Amine Self-Assembled Monolayers on Mica as Revealed from AFM Techniques

artículo científico publicado en 2017

Pectin-lipid self-assembly: influence on the formation of polyhydroxy fatty acids nanoparticles

artículo científico publicado en 2015

Photo-polymerisable electrospun fibres of N-methacrylate glycol chitosan for biomedical applications

scholarly article in RSC Advances, vol. 5 no. 31, 2015

Plant cuticle under global change: biophysical implications

artículo científico publicado en 2018

Plant cutin genesis: unanswered questions

artículo científico

Plant-Inspired Polyaleuritate–Nanocellulose Composite Photonic Films

artículo científico publicado en 2020

Poly(furfuryl alcohol)-Polycaprolactone Blends

scientific article published on 20 June 2019

Polyester films obtained by noncatalyzed melt-condensation polymerization of aleuritic (9,10,16-trihydroxyhexadecanoic) acid in air

Polyhydroxyester Films Obtained by Non-Catalyzed Melt-Polycondensation of Natural Occurring Fatty Polyhydroxyacids

Robust and biodegradable elastomers based on corn starch and polydimethylsiloxane (PDMS).

artículo científico publicado en 2015

Self-Assembly of Carboxylic Acids and Hydroxyl Derivatives on Mica. A Qualitative AFM Study

Self-assembled polyhydroxy fatty acids vesicles: a mechanism for plant cutin synthesis

article

Self-assembly of supramolecular lipid nanoparticles in the formation of plant biopolyester cutin

artículo científico publicado en 2010

Structural characterization of polyhydroxy fatty acid nanoparticles related to plant lipid biopolyesters

article

Superhydrophobic high impact polystyrene (HIPS) nanocomposites with wear abrasion resistance

Surface-structured bacterial cellulose with guided assembly-based biolithography (GAB).

artículo científico publicado en 2014

Sustainable Electronics Based on Crop Plant Extracts and Graphene: A “Bioadvantaged” Approach

article

Sustainable Fabrication of Plant Cuticle-Like Packaging Films from Tomato Pomace Agro-Waste, Beeswax, and Alginate

article

Synthesis and characterization of a plant cutin mimetic polymer

article

The Role of Hydroxyl Groups in the Self-Assembly of Long Chain Alkylhydroxyl Carboxylic Acids on Mica

The biophysical design of plant cuticles: an overview.

artículo científico publicado en 2011

The plant cuticle: old challenges, new perspectives

artículo científico publicado en 2017

Transient silencing of CHALCONE SYNTHASE during fruit ripening modifies tomato epidermal cells and cuticle properties.

artículo científico publicado en 2014

Transparent and Robust -Cellulose Nanocomposite Packaging Materials Prepared in a Mixture of Trifluoroacetic Acid and Trifluoroacetic Anhydride

artículo científico publicado en 2019

Transparent and flexible amorphous cellulose-acrylic hybrids

Transparent ciprofloxacin-povidone antibiotic films and nanofiber mats as potential skin and wound care dressings

artículo científico publicado en 2017

Valorization of Tomato Processing by-Products: Fatty Acid Extraction and Production of Bio-Based Materials

artículo científico publicado en 2018

Wettability, polarity, and water absorption of holm oak leaves: effect of leaf side and age.

artículo científico publicado en 2014

Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging

scientific article published on 03 November 2021

Zwitterionic Nanofibers of Super-Glue for Transparent and Biocompatible Multi-Purpose Coatings

artículo científico publicado en 2015

Lista de obras de José A Heredia-Guerrero

Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties

Aleuritic (9,10,16-trihydroxypalmitic) acid self-assembly on mica

Alginate nanofibrous mats with adjustable degradation rate for regenerative medicine

Antibacterial Melamine Foams Decorated with in Situ Synthesized Silver Nanoparticles

Antimicrobial, antioxidant, and waterproof RTV silicone-ethyl cellulose composites containing clove essential oil

Bio-Based Coatings for Food Metal Packaging Inspired in Biopolyester Plant Cutin

Bio-based lacquers from industrially processed tomato pomace for sustainable metal food packaging

Biodegradable and Insoluble Cellulose Photonic Crystals and Metasurfaces

Biodegradable polyester films from renewable aleuritic acid: surface modifications induced by melt-polycondensation in air

Biomechanical properties of the tomato (Solanum lycopersicum) fruit cuticle during development are modulated by changes in the relative amounts of its components

Biomimetic Approach for Liquid Encapsulation with Nanofibrillar Cloaks

Biomimetic polymers of plant cutin: an approach from molecular modeling

CHS silencing suggests a negative cross-talk between wax and flavonoid pathways in tomato fruit cuticle

Cellulose-polyhydroxylated fatty acid ester-based bioplastics with tuning properties: Acylation via a mixed anhydride system

Chemical reactions in 2D: self-assembly and self-esterification of 9(10),16-dihydroxypalmitic acid on mica surface.

Chemical–physical characterization of isolated plant cuticles subjected to low-dose γ-irradiation

Cutin from agro-waste as a raw material for the production of bioplastics

Cutin synthesis: A slippery paradigm

Direct Transformation of Edible Vegetable Waste into Bioplastics

Effect of trifluoroacetic acid on the properties of polyvinyl alcohol and polyvinyl alcohol–cellulose composites

Electrostatic Induced Molecular Tilting in Self-Assembled Monolayers of n-Octadecylamine on Mica

Facile production of seaweed-based biomaterials with antioxidant and anti-inflammatory activities

Fumarate-loaded electrospun nanofibers with anti-inflammatory activity for fast recovery of mild skin burns.

Graphene and polytetrafluoroethylene synergistically improve the tribological properties and adhesion of nylon 66 coatings

Graphene–enhanced differentiation of neuroblastoma mouse cells mediated by poly-D-lysine

Highly Effective Antiadhesive Coatings from pH-Modified Water-Dispersed Perfluorinated Acrylic Copolymers: The Case of Vulcanizing Rubber

Infrared and Raman spectroscopic features of plant cuticles: a review

Insolubilization and thermal stabilization of a long-chain polyester by noncatalyzed melt-polycondensation synthesis in air

Long-Chain Polyhydroxyesters from Natural Occurring Aleuritic Acid as Potential Material for Food Packaging

Low-Cost and Effective Fabrication of Biocompatible Nanofibers from Silk and Cellulose-Rich Materials

Multifunctional Bioplastics Inspired by Wood Composition: Effect of Hydrolyzed Lignin Addition to Xylan-Cellulose Matrices

New insights into the properties of pubescent surfaces: peach fruit as a model

Omniphobic nanocomposite fiber mats with peel-away self similarity

Packing Defects in Fatty Amine Self-Assembled Monolayers on Mica as Revealed from AFM Techniques

Pectin-lipid self-assembly: influence on the formation of polyhydroxy fatty acids nanoparticles

Photo-polymerisable electrospun fibres of N-methacrylate glycol chitosan for biomedical applications

Plant cuticle under global change: biophysical implications

Plant cutin genesis: unanswered questions

Plant-Inspired Polyaleuritate–Nanocellulose Composite Photonic Films

Poly(furfuryl alcohol)-Polycaprolactone Blends

Polyester films obtained by noncatalyzed melt-condensation polymerization of aleuritic (9,10,16-trihydroxyhexadecanoic) acid in air

Polyhydroxyester Films Obtained by Non-Catalyzed Melt-Polycondensation of Natural Occurring Fatty Polyhydroxyacids

Robust and biodegradable elastomers based on corn starch and polydimethylsiloxane (PDMS).

Self-Assembly of Carboxylic Acids and Hydroxyl Derivatives on Mica. A Qualitative AFM Study

Self-assembled polyhydroxy fatty acids vesicles: a mechanism for plant cutin synthesis

Self-assembly of supramolecular lipid nanoparticles in the formation of plant biopolyester cutin

Structural characterization of polyhydroxy fatty acid nanoparticles related to plant lipid biopolyesters

Superhydrophobic high impact polystyrene (HIPS) nanocomposites with wear abrasion resistance

Surface-structured bacterial cellulose with guided assembly-based biolithography (GAB).

Sustainable Electronics Based on Crop Plant Extracts and Graphene: A “Bioadvantaged” Approach

Sustainable Fabrication of Plant Cuticle-Like Packaging Films from Tomato Pomace Agro-Waste, Beeswax, and Alginate

Synthesis and characterization of a plant cutin mimetic polymer

The Role of Hydroxyl Groups in the Self-Assembly of Long Chain Alkylhydroxyl Carboxylic Acids on Mica

The biophysical design of plant cuticles: an overview.

The plant cuticle: old challenges, new perspectives

Transient silencing of CHALCONE SYNTHASE during fruit ripening modifies tomato epidermal cells and cuticle properties.

Transparent and Robust -Cellulose Nanocomposite Packaging Materials Prepared in a Mixture of Trifluoroacetic Acid and Trifluoroacetic Anhydride

Transparent and flexible amorphous cellulose-acrylic hybrids

Transparent ciprofloxacin-povidone antibiotic films and nanofiber mats as potential skin and wound care dressings

Valorization of Tomato Processing by-Products: Fatty Acid Extraction and Production of Bio-Based Materials

Wettability, polarity, and water absorption of holm oak leaves: effect of leaf side and age.

Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging

Zwitterionic Nanofibers of Super-Glue for Transparent and Biocompatible Multi-Purpose Coatings