Lista de obras -

A randomized controlled study evaluating the effectiveness of a two-step self-etch adhesive with and without selective phosphoric-acid etching of enamel

artículo científico publicado en 2005

A randomized, controlled trial evaluating the three-year clinical effectiveness of two etch & rinse adhesives in cervical lesions

artículo científico publicado en 2004

Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach.

artículo científico publicado en 2016

Androgen receptor disruption increases the osteogenic response to mechanical loading in male mice

artículo científico publicado en 2010

Apatite formation on bioactive calcium-silicate cements for dentistry affects surface topography and human marrow stromal cells proliferation

artículo científico publicado en 2010

Biofilm-induced changes to the composite surface

artículo científico publicado en 2017

Biomechanical behavior of endodontically treated premolars using different preparation designs and CAD/CAM materials

artículo científico publicado en 2017

Bond durability of self-adhesive composite cements to dentine ⬇️

artículo científico publicado el 30 de julio de 2013

Bond strength and cement-tooth interfacial characterization of self-adhesive composite cements

artículo científico publicado en 2017

Bond strength of self-etch adhesives to dentin prepared with three different diamond burs

artículo científico publicado en 2008

Bonding Efficacy and Fracture Pattern of Adhesives Submitted to Mechanical Aging with the Rub&Roll Device

artículo científico publicado en 2017

Bonding effectiveness and interfacial characterization of a HEMA/TEGDMA-free three-step etch&rinse adhesive

artículo científico publicado en 2008

Bulk-Fill Composites: A Review of the Current Literature

artículo científico publicado en 2017

Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges.

artículo científico publicado en 2003

Caries-removal effectiveness and minimal-invasiveness potential of caries-excavation techniques: a micro-CT investigation.

artículo científico publicado en 2010

Chemical interaction mechanism of 10-MDP with zirconia.

artículo científico publicado en 2017

Correlative analysis of cement-dentin interfaces using an interfacial fracture toughness and micro-tensile bond strength approach.

artículo científico publicado en 2016

Correlative micro-Raman/EPMA analysis of the hydraulic calcium silicate cement interface with dentin.

artículo científico publicado en 2015

Curing characteristics of flowable and sculptable bulk-fill composites.

artículo científico publicado en 2016

Current concepts and techniques for caries excavation and adhesion to residual dentin

artículo científico publicado el 1 de febrero de 2011

Cytotoxic and genotoxic potential of respirable fraction of composite dust on human bronchial cells

artículo científico publicado en 2019

Cytotoxic effects of composite dust on human bronchial epithelial cells

artículo científico publicado en 2016

Degree of conversion and monomer elution of CQ/amine and TPO adhesives

artículo científico publicado en 2014

Development of self-adhesive pulp-capping agents containing a novel hydrophilic and highly polymerizable acrylamide monomer

artículo científico publicado en 2020

Does DIAGNOdent provide a reliable caries-removal endpoint? ⬇️

artículo científico publicado el 18 de febrero de 2011

Effect of Bulk-filling on the Bonding Efficacy in Occlusal Class I Cavities.

artículo científico publicado en 2016

Effect of polyphosphoric acid pre-treatment of titanium on attachment, proliferation, and differentiation of osteoblast-like cells (MC3T3-E1).

artículo científico publicado en 2008

Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites.

artículo científico publicado en 2015

Efficiency and cytotoxicity of resin-based desensitizing agents

artículo científico publicado en 2002

Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro ⬇️

artículo científico publicado el 12 de enero de 2011

Environmental scanning electron microscopy connected with energy dispersive x-ray analysis and Raman techniques to study ProRoot mineral trioxide aggregate and calcium silicate cements in wet conditions and in real time

artículo científico publicado en 2010

Enzymatic degradation of adhesive-dentin interfaces produced by mild self-etch adhesives

artículo científico publicado en 2010

Evaluation of cell responses toward adhesives with different photoinitiating systems

artículo científico publicado en 2015

Fatigue resistance of dentin/composite interfaces with an additional intermediate elastic layer

artículo científico publicado en 2005

Filtration efficiency of surgical and FFP3 masks against composite dust

artículo científico publicado en 2020

First Report of Filamentous Phages Isolated from Tunisian Orchards to Control Erwinia amylovora

artículo científico publicado en 2020

Five-year clinical effectiveness of a two-step self-etching adhesive

artículo científico publicado en 2007

Freshly-mixed and setting calcium-silicate cements stimulate human dental pulp cells.

artículo científico publicado en 2018

How to "Sell" Your Paper to a Peer-reviewed Journal

artículo científico publicado en 2016

How to simulate wear? Overview of existing methods

artículo científico publicado en 2006

Hydrolytic stability of three-step etch-and-rinse adhesives in occlusal class-I cavities.

artículo científico publicado en 2012

Influence of Er,Cr:YSGG laser treatment on microtensile bond strength of adhesives to enamel

artículo científico publicado en 2008

Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin.

artículo científico publicado en 2008

Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives

artículo científico publicado en 2007

Influence of three specimen fixation modes on the micro-tensile bond strength of adhesives to dentin.

artículo científico publicado en 2007

Is secondary caries with composites a material-based problem?

artículo científico

Light irradiance through novel CAD-CAM block materials and degree of conversion of composite cements

artículo científico publicado en 2017

Light-curing efficiency of dental adhesives by gallium nitride violet-laser diode determined in terms of ultimate micro-tensile strength

artículo científico publicado en 2011

Limited interaction of a self-adhesive flowable composite with dentin/enamel characterized by TEM.

artículo científico publicado en 2016

Long-term bonding to eroded dentin requires superficial bur preparation ⬇️

artículo científico publicado el 8 de diciembre de 2011

Micro-tensile bond strength and interfacial characterization of an adhesive bonded to dentin prepared by contemporary caries-excavation techniques ⬇️

artículo científico publicado el 13 de abril de 2011

Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin

artículo científico publicado en 2002

Microrotary fatigue resistance of a HEMA-free all-in-one adhesive bonded to dentin.

artículo científico publicado en 2007

Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment

artículo científico publicado el 1 de septiembre de 2003

NaOCl degradation of a HEMA-free all-in-one adhesive bonded to enamel and dentin following two air-blowing techniques

artículo científico publicado en 2006

Nano-controlled molecular interaction at adhesive interfaces for hard tissue reconstruction

artículo científico publicado en 2010

Nanofilled and microhybrid composite restorations: Five-year clinical wear performances ⬇️

artículo científico publicado el 6 de mayo de 2011

Nanohybrid and microfilled hybrid versus conventional hybrid composite restorations: 5-year clinical wear performance ⬇️

artículo científico publicado el 11 de enero de 2011

No Evidence for DNA Double-strand Breaks Caused by Endodontic Sealers ⬇️

artículo científico publicado el 11 de febrero de 2012

No evidence for the growth-stimulating effect of monomers on cariogenic Streptococci

artículo científico publicado en 2016

Open-access journals - a scientific thriller

artículo científico publicado en 2013

Optimization of the concentration of photo-initiator in a one-step self-etch adhesive

artículo científico publicado en 2009

Real time assessment of surface interactions with a titanium passivation layer by surface plasmon resonance

artículo científico publicado en 2011

Sample size considerations for restoration-longevity randomized controlled trials

artículo científico publicado en 2008

Saturation reduces in-vitro leakage of monomers from composites

artículo científico publicado en 2018

Short fibre-reinforced composite for extensive direct restorations: a laboratory and computational assessment

artículo científico publicado en 2015

Strain development in bulk-filled cavities of different depths characterized using a non-destructive acoustic emission approach

artículo científico publicado en 2017

Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations.

artículo científico publicado en 2016

Systematic review of the chemical composition of contemporary dental adhesives

artículo científico publicado en 2007

TEM characterization of a silorane composite bonded to enamel/dentin

artículo científico publicado en 2010

Technique-sensitivity of contemporary adhesives

artículo científico publicado en 2005

Temporal variability of global DNA methylation and hydroxymethylation in buccal cells of healthy adults: Association with air pollution

artículo científico publicado en 2017

Three-year clinical effectiveness of a two-step self-etch adhesive in cervical lesions

artículo científico publicado en 2005

Three-year randomised clinical trial to evaluate the clinical performance, quantitative and qualitative wear patterns of hybrid composite restorations

artículo científico publicado en 2010

Three-year randomized clinical trial to evaluate the clinical performance and wear of a nanocomposite versus a hybrid composite

artículo científico publicado en 2009

Towards a better understanding of the adhesion mechanism of resin-modified glass-ionomers by bonding to differently prepared dentin.

artículo científico publicado en 2010

Lista de obras de

A randomized controlled study evaluating the effectiveness of a two-step self-etch adhesive with and without selective phosphoric-acid etching of enamel

A randomized, controlled trial evaluating the three-year clinical effectiveness of two etch & rinse adhesives in cervical lesions

Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach.

Androgen receptor disruption increases the osteogenic response to mechanical loading in male mice

Apatite formation on bioactive calcium-silicate cements for dentistry affects surface topography and human marrow stromal cells proliferation

Biofilm-induced changes to the composite surface

Biomechanical behavior of endodontically treated premolars using different preparation designs and CAD/CAM materials

Bond durability of self-adhesive composite cements to dentine ⬇️

Bond strength and cement-tooth interfacial characterization of self-adhesive composite cements

Bond strength of self-etch adhesives to dentin prepared with three different diamond burs

Bonding Efficacy and Fracture Pattern of Adhesives Submitted to Mechanical Aging with the Rub&Roll Device

Bonding effectiveness and interfacial characterization of a HEMA/TEGDMA-free three-step etch&rinse adhesive

Bulk-Fill Composites: A Review of the Current Literature

Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges.

Caries-removal effectiveness and minimal-invasiveness potential of caries-excavation techniques: a micro-CT investigation.

Chemical interaction mechanism of 10-MDP with zirconia.

Correlative analysis of cement-dentin interfaces using an interfacial fracture toughness and micro-tensile bond strength approach.

Correlative micro-Raman/EPMA analysis of the hydraulic calcium silicate cement interface with dentin.

Curing characteristics of flowable and sculptable bulk-fill composites.

Current concepts and techniques for caries excavation and adhesion to residual dentin

Cytotoxic and genotoxic potential of respirable fraction of composite dust on human bronchial cells

Cytotoxic effects of composite dust on human bronchial epithelial cells

Degree of conversion and monomer elution of CQ/amine and TPO adhesives

Development of self-adhesive pulp-capping agents containing a novel hydrophilic and highly polymerizable acrylamide monomer

Does DIAGNOdent provide a reliable caries-removal endpoint? ⬇️

Effect of Bulk-filling on the Bonding Efficacy in Occlusal Class I Cavities.

Effect of polyphosphoric acid pre-treatment of titanium on attachment, proliferation, and differentiation of osteoblast-like cells (MC3T3-E1).

Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites.

Efficiency and cytotoxicity of resin-based desensitizing agents

Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro ⬇️

Environmental scanning electron microscopy connected with energy dispersive x-ray analysis and Raman techniques to study ProRoot mineral trioxide aggregate and calcium silicate cements in wet conditions and in real time

Enzymatic degradation of adhesive-dentin interfaces produced by mild self-etch adhesives

Evaluation of cell responses toward adhesives with different photoinitiating systems

Fatigue resistance of dentin/composite interfaces with an additional intermediate elastic layer

Filtration efficiency of surgical and FFP3 masks against composite dust

First Report of Filamentous Phages Isolated from Tunisian Orchards to Control Erwinia amylovora

Five-year clinical effectiveness of a two-step self-etching adhesive

Freshly-mixed and setting calcium-silicate cements stimulate human dental pulp cells.

How to "Sell" Your Paper to a Peer-reviewed Journal

How to simulate wear? Overview of existing methods

Hydrolytic stability of three-step etch-and-rinse adhesives in occlusal class-I cavities.

Influence of Er,Cr:YSGG laser treatment on microtensile bond strength of adhesives to enamel

Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin.

Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives

Influence of three specimen fixation modes on the micro-tensile bond strength of adhesives to dentin.

Is secondary caries with composites a material-based problem?

Light irradiance through novel CAD-CAM block materials and degree of conversion of composite cements

Light-curing efficiency of dental adhesives by gallium nitride violet-laser diode determined in terms of ultimate micro-tensile strength

Limited interaction of a self-adhesive flowable composite with dentin/enamel characterized by TEM.

Long-term bonding to eroded dentin requires superficial bur preparation ⬇️

Micro-tensile bond strength and interfacial characterization of an adhesive bonded to dentin prepared by contemporary caries-excavation techniques ⬇️

Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin

Microrotary fatigue resistance of a HEMA-free all-in-one adhesive bonded to dentin.

Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment

NaOCl degradation of a HEMA-free all-in-one adhesive bonded to enamel and dentin following two air-blowing techniques

Nano-controlled molecular interaction at adhesive interfaces for hard tissue reconstruction

Nanofilled and microhybrid composite restorations: Five-year clinical wear performances ⬇️

Nanohybrid and microfilled hybrid versus conventional hybrid composite restorations: 5-year clinical wear performance ⬇️

No Evidence for DNA Double-strand Breaks Caused by Endodontic Sealers ⬇️

No evidence for the growth-stimulating effect of monomers on cariogenic Streptococci

Open-access journals - a scientific thriller

Optimization of the concentration of photo-initiator in a one-step self-etch adhesive

Real time assessment of surface interactions with a titanium passivation layer by surface plasmon resonance

Sample size considerations for restoration-longevity randomized controlled trials

Saturation reduces in-vitro leakage of monomers from composites

Short fibre-reinforced composite for extensive direct restorations: a laboratory and computational assessment

Strain development in bulk-filled cavities of different depths characterized using a non-destructive acoustic emission approach

Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations.

Systematic review of the chemical composition of contemporary dental adhesives

TEM characterization of a silorane composite bonded to enamel/dentin

Technique-sensitivity of contemporary adhesives

Temporal variability of global DNA methylation and hydroxymethylation in buccal cells of healthy adults: Association with air pollution

Three-year clinical effectiveness of a two-step self-etch adhesive in cervical lesions

Three-year randomised clinical trial to evaluate the clinical performance, quantitative and qualitative wear patterns of hybrid composite restorations

Three-year randomized clinical trial to evaluate the clinical performance and wear of a nanocomposite versus a hybrid composite

Towards a better understanding of the adhesion mechanism of resin-modified glass-ionomers by bonding to differently prepared dentin.