Lista de obras -

A Finite Element Model of a mid-size male for simulating pedestrian accidents

artículo científico publicado en 2017

A Method to Quantify Supine to Prone Thoracoabdominal Deformation and Organ Migration in a Set of Healthy Young Adults

artículo científico publicado en 2015

A comparative study of optimization techniques for tuning a finite element model of the lung to biomechanical data.

artículo científico publicado en 2007

A detailed finite element model of a mid-sized male for the investigation of traffic pedestrian accidents

scientific article published on 10 December 2020

A finite element model of a six-year-old child for simulating pedestrian accidents

artículo científico publicado en 2016

A finite element study of age-based size and shape variation of the human rib cage.

artículo científico publicado en 2006

A finite element-based injury metric for pulmonary contusion: investigation of candidate metrics through correlation with computed tomography.

artículo científico publicado en 2007

A method for developing biomechanical response corridors based on principal component analysis.

artículo científico publicado en 2016

A method to measure predictive ability of an injury risk curve using an observation-adjusted area under the receiver operating characteristic curve

artículo científico publicado en 2018

A paradigm for human body finite element model integration from a set of regional models

artículo científico publicado en 2012

A point-wise normalization method for development of biofidelity response corridors.

artículo científico publicado en 2015

A preliminary study of human model head and neck response to frontal loading in nontraditional occupant seating configurations

artículo científico publicado en 2018

A technique for developing CAD geometry of long bones using clinical CT data

artículo científico publicado en 2015

Abdominal Organ Location, Morphology, and Rib Coverage for the 5(th), 50(th), and 95(th) Percentile Males and Females in the Supine and Seated Posture using Multi-Modality Imaging

artículo científico publicado en 2013

An Improved Method for Developing Injury Risk Curves Using the Brier Metric Score

artículo científico publicado en 2020

An Objective Evaluation of Mass Scaling Techniques Utilizing Computational Human Body Finite Element Models

artículo científico publicado en 2016

An evaluation of objective rating methods for full-body finite element model comparison to PMHS tests

artículo científico publicado en 2013

An experimental and computational study of blunt carotid artery injury.

artículo científico publicado en 2006

Application of Radial Basis Function Methods in the Development of a 95th Percentile Male Seated FEA Model.

artículo científico publicado en 2014

Applying dynamic contrast enhanced MSOT imaging to intratumoral pharmacokinetic modeling

scientific article published on 27 July 2018

Bilateral carotid artery injury response in side impact using a vessel model integrated with a human body model.

artículo científico publicado en 2009

Biomechanical analysis of pulmonary contusion in motor vehicle crash victims: a crash injury research and engineering network (ciren) study - biomed 2009.

artículo científico publicado en 2009

Characterization of crash-induced thoracic loading resulting in pulmonary contusion

artículo científico publicado en 2009

Characterization of the carotid and adjacent anatomy using non-contrast CT for biomechanical model development

artículo científico publicado en 2007

Comparison of Neck Injury Criteria Values Across Human Body Models of Varying Complexity

scientific article published on 18 August 2020

Comparison of organ location, morphology, and rib coverage of a midsized male in the supine and seated positions

artículo científico publicado en 2013

Correction to: Development and Multi-Scale Validation of a Finite Element Football Helmet Model

scientific article published on 01 February 2020

Cross-sectional neck response of a total human body FE model during simulated frontal and side automobile impacts

artículo científico publicado en 2013

Deriving injury risk curves using survival analysis from biomechanical experiments

artículo científico publicado en 2016

Design, development, and analysis of a surrogate for pulmonary injury prediction.

artículo científico publicado en 2011

Development and Full Body Validation of a 5th Percentile Female Finite Element Model

artículo científico publicado en 2016

Development and Multi-Scale Validation of a Finite Element Football Helmet Model

artículo científico publicado en 2019

Development and Preliminary Validation of a 50thPercentile Pedestrian Finite Element Model

article

Development and Validation of a Brain Phantom for Therapeutic Cooling Devices

artículo científico publicado en 2017

Development and validation of a finite element model of a small female pedestrian

artículo científico publicado en 2020

Development of a Full Body CAD Dataset for Computational Modeling: A Multi-modality Approach ⬇️

artículo científico publicado el 23 de julio de 2011

Development of a computationally efficient full human body finite element model

artículo científico publicado en 2015

Development of a finite element-based injury metric for pulmonary contusion part I: model development and validation

artículo científico publicado en 2005

Development of a simplified finite element model of the 50th percentile male occupant lower extremity

artículo científico publicado en 2014

Effects of cervical arthrodesis and arthroplasty on neck response during a simulated frontal automobile collision

artículo científico publicado en 2014

Evaluation of finite element human body models for use in a standardized protocol for pedestrian safety assessment

artículo científico publicado en 2019

Experimental validation of an inverse heat transfer algorithm for optimizing hyperthermia treatments.

artículo científico publicado en 2006

External landmark, body surface, and volume data of a mid-sized male in seated and standing postures

artículo científico publicado en 2012

Failed rib region prediction in a human body model during crash events with precrash braking.

artículo científico publicado en 2018

Finite element comparison of human and Hybrid III responses in a frontal impact.

artículo científico publicado en 2015

Finite element reconstruction of a vehicle-to-pedestrian impact

artículo científico publicado en 2020

Finite element-based injury metrics for pulmonary contusion via concurrent model optimization

artículo científico publicado el 25 de agosto de 2010

Geometric scaling factors for the pediatric brainstem

artículo científico publicado en 2008

Head and neck response of a finite element anthropomorphic test device and human body model during a simulated rotary-wing aircraft impact

artículo científico publicado en 2014

Head injury metric response in finite element ATDs and a human body model in multidirectional loading regimes

artículo científico publicado en 2019

Hierarchical Validation Prevents Over-Fitting of the Neck Material Model for an Anthropomorphic Test Device Used in Underbody Blast Scenarios

artículo científico publicado en 2020

Human liver finite element model validation using compressive and tensile experimental data - biomed 2013.

artículo científico publicado en 2013

Investigation of the mass distribution of a detailed seated male finite element model

artículo científico publicado en 2013

Lateral impact validation of a geometrically accurate full body finite element model for blunt injury prediction

artículo científico publicado en 2012

Lumbar Spine Response of Computational Finite Element Models in Multidirectional Spaceflight Landing Conditions

scientific article published on 01 November 2019

Mesh development for a finite element model of the carotid artery

artículo científico publicado en 2006

Methods for comparison of abdominal organ location and shape in the supine and upright positions

artículo científico publicado en 2012

Methods for validation of the mass distribution of a full body finite element model - biomed 2011

artículo científico publicado el 1 de enero de 2011

Modeling Human Volunteers in Multidirectional, Uni-axial Sled Tests Using a Finite Element Human Body Model

artículo científico publicado en 2018

Modular use of human body models of varying levels of complexity: Validation of head kinematics

artículo científico publicado en 2017

Novel method of estimating AROC using an injury risk curve for biomechanical injury metric selection.

artículo científico publicado en 2018

Objective Evaluation of Whole Body Kinematics in a Simulated, Restrained Frontal Impact

scientific article published on 06 December 2018

Physical model reproduction from ct scans classified according to gender, ethnicity, and age - biomed 2009.

artículo científico publicado en 2009

Quantification of age-related shape change of the human rib cage through geometric morphometrics

artículo científico publicado en 2008

Quantitative Validation of a Human Body Finite Element Model Using Rigid Body Impacts

artículo científico publicado en 2015

Quantitative histology of contused lung tissue with comparison to computed tomography

artículo científico publicado en 2008

Response to Letter to the Editor on "Deriving injury risk curves using survival analysis from biomechanical experiments", Journal of Biomechanics (in press).

artículo científico publicado en 2016

Similitude assessment method for comparing PMHS response data from impact loading across multiple test devices

artículo científico publicado en 2018

Simulation-based assessment of injury risk for an average male motorsport driver

artículo científico publicado en 2020

Statistical modeling of human liver incorporating the variations in shape, size, and material properties

artículo científico publicado en 2013

The effect of impactor location and velocity variation on validation of an advanced human body finite element model

artículo científico publicado en 2012

The effect of precrash velocity reduction on occupant response using a human body finite element model

artículo científico publicado en 2017

The pathogenesis of pulmonary contusion: an open chest model in the rat.

artículo científico publicado en 2006

Thoracoabdominal organ volumes for small women

artículo científico publicado en 2014

Traumatic pulmonary pathology measured with computed tomography and a semiautomated analytic method

artículo científico publicado en 2008

Validated thoracic vertebrae and costovertebral joints increase biofidelity of a human body model in hub impacts

scientific article published on 31 July 2019

Validation of a simplified human body model in relaxed and braced conditions in low-speed frontal sled tests

artículo científico publicado en 2019

Validation of simulated chestband data in frontal and lateral loading using a human body finite element model

artículo científico publicado en 2014

Lista de obras de

A Finite Element Model of a mid-size male for simulating pedestrian accidents

A Method to Quantify Supine to Prone Thoracoabdominal Deformation and Organ Migration in a Set of Healthy Young Adults

A comparative study of optimization techniques for tuning a finite element model of the lung to biomechanical data.

A detailed finite element model of a mid-sized male for the investigation of traffic pedestrian accidents

A finite element model of a six-year-old child for simulating pedestrian accidents

A finite element study of age-based size and shape variation of the human rib cage.

A finite element-based injury metric for pulmonary contusion: investigation of candidate metrics through correlation with computed tomography.

A method for developing biomechanical response corridors based on principal component analysis.

A method to measure predictive ability of an injury risk curve using an observation-adjusted area under the receiver operating characteristic curve

A paradigm for human body finite element model integration from a set of regional models

A point-wise normalization method for development of biofidelity response corridors.

A preliminary study of human model head and neck response to frontal loading in nontraditional occupant seating configurations

A technique for developing CAD geometry of long bones using clinical CT data

Abdominal Organ Location, Morphology, and Rib Coverage for the 5(th), 50(th), and 95(th) Percentile Males and Females in the Supine and Seated Posture using Multi-Modality Imaging

An Improved Method for Developing Injury Risk Curves Using the Brier Metric Score

An Objective Evaluation of Mass Scaling Techniques Utilizing Computational Human Body Finite Element Models

An evaluation of objective rating methods for full-body finite element model comparison to PMHS tests

An experimental and computational study of blunt carotid artery injury.

Application of Radial Basis Function Methods in the Development of a 95th Percentile Male Seated FEA Model.

Applying dynamic contrast enhanced MSOT imaging to intratumoral pharmacokinetic modeling

Bilateral carotid artery injury response in side impact using a vessel model integrated with a human body model.

Biomechanical analysis of pulmonary contusion in motor vehicle crash victims: a crash injury research and engineering network (ciren) study - biomed 2009.

Characterization of crash-induced thoracic loading resulting in pulmonary contusion

Characterization of the carotid and adjacent anatomy using non-contrast CT for biomechanical model development

Comparison of Neck Injury Criteria Values Across Human Body Models of Varying Complexity

Comparison of organ location, morphology, and rib coverage of a midsized male in the supine and seated positions

Correction to: Development and Multi-Scale Validation of a Finite Element Football Helmet Model

Cross-sectional neck response of a total human body FE model during simulated frontal and side automobile impacts

Deriving injury risk curves using survival analysis from biomechanical experiments

Design, development, and analysis of a surrogate for pulmonary injury prediction.

Development and Full Body Validation of a 5th Percentile Female Finite Element Model

Development and Multi-Scale Validation of a Finite Element Football Helmet Model

Development and Preliminary Validation of a 50thPercentile Pedestrian Finite Element Model

Development and Validation of a Brain Phantom for Therapeutic Cooling Devices

Development and validation of a finite element model of a small female pedestrian

Development of a Full Body CAD Dataset for Computational Modeling: A Multi-modality Approach ⬇️

Development of a computationally efficient full human body finite element model

Development of a finite element-based injury metric for pulmonary contusion part I: model development and validation

Development of a simplified finite element model of the 50th percentile male occupant lower extremity

Effects of cervical arthrodesis and arthroplasty on neck response during a simulated frontal automobile collision

Evaluation of finite element human body models for use in a standardized protocol for pedestrian safety assessment

Experimental validation of an inverse heat transfer algorithm for optimizing hyperthermia treatments.

External landmark, body surface, and volume data of a mid-sized male in seated and standing postures

Failed rib region prediction in a human body model during crash events with precrash braking.

Finite element comparison of human and Hybrid III responses in a frontal impact.

Finite element reconstruction of a vehicle-to-pedestrian impact

Finite element-based injury metrics for pulmonary contusion via concurrent model optimization

Geometric scaling factors for the pediatric brainstem

Head and neck response of a finite element anthropomorphic test device and human body model during a simulated rotary-wing aircraft impact

Head injury metric response in finite element ATDs and a human body model in multidirectional loading regimes

Hierarchical Validation Prevents Over-Fitting of the Neck Material Model for an Anthropomorphic Test Device Used in Underbody Blast Scenarios

Human liver finite element model validation using compressive and tensile experimental data - biomed 2013.

Investigation of the mass distribution of a detailed seated male finite element model

Lateral impact validation of a geometrically accurate full body finite element model for blunt injury prediction

Lumbar Spine Response of Computational Finite Element Models in Multidirectional Spaceflight Landing Conditions

Mesh development for a finite element model of the carotid artery

Methods for comparison of abdominal organ location and shape in the supine and upright positions

Methods for validation of the mass distribution of a full body finite element model - biomed 2011

Modeling Human Volunteers in Multidirectional, Uni-axial Sled Tests Using a Finite Element Human Body Model

Modular use of human body models of varying levels of complexity: Validation of head kinematics

Novel method of estimating AROC using an injury risk curve for biomechanical injury metric selection.

Objective Evaluation of Whole Body Kinematics in a Simulated, Restrained Frontal Impact

Physical model reproduction from ct scans classified according to gender, ethnicity, and age - biomed 2009.

Quantification of age-related shape change of the human rib cage through geometric morphometrics

Quantitative Validation of a Human Body Finite Element Model Using Rigid Body Impacts

Quantitative histology of contused lung tissue with comparison to computed tomography

Response to Letter to the Editor on "Deriving injury risk curves using survival analysis from biomechanical experiments", Journal of Biomechanics (in press).

Similitude assessment method for comparing PMHS response data from impact loading across multiple test devices

Simulation-based assessment of injury risk for an average male motorsport driver

Statistical modeling of human liver incorporating the variations in shape, size, and material properties

The effect of impactor location and velocity variation on validation of an advanced human body finite element model

The effect of precrash velocity reduction on occupant response using a human body finite element model

The pathogenesis of pulmonary contusion: an open chest model in the rat.

Thoracoabdominal organ volumes for small women

Traumatic pulmonary pathology measured with computed tomography and a semiautomated analytic method

Validated thoracic vertebrae and costovertebral joints increase biofidelity of a human body model in hub impacts

Validation of a simplified human body model in relaxed and braced conditions in low-speed frontal sled tests

Validation of simulated chestband data in frontal and lateral loading using a human body finite element model