Filtros de búsqueda

Lista de obras de Mutlu Özcan

A 10-Year Follow-Up of Different Intra-Radicular Retainers in Teeth Restored with Zirconia Crowns

scientific article published on 27 December 2019

A Clinical Study Assessing the Influence of Anodized Titanium and Zirconium Dioxide Abutments and Peri-implant Soft Tissue Thickness on the Optical Outcome of Implant-Supported Lithium Disilicate Single Crowns

artículo científico publicado en 2017

A Review of the Applications of Additive Manufacturing Technologies Used to Fabricate Metals in Implant Dentistry

artículo científico publicado en 2020

A Survey on Prevalence, Causes and Prevention of Postcementation Hypersensitivity

artículo científico publicado en 2016

A Technical Report on Repair of Amalgam-dentin Complex ⬇️

artículo científico publicado el 11 de agosto de 2011

A clinical protocol for intraoral digital impression of screw-retained CAD/CAM framework on multiple implants based on wavefront sampling technology.

artículo científico publicado en 2013

A comparative study between cone-beam computed tomography and periapical radiographs in the diagnosis of simulated endodontic complications

artículo científico publicado el 11 de octubre de 2010

A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique

artículo científico publicado en 2019

A microstrain comparison of passively fitting screw-retained and cemented titanium frameworks

artículo científico publicado en 2014

A preliminary report on short-term clinical outcomes of three-unit resin-bonded fixed prostheses using two adhesive cements and surface conditioning combinations.

artículo científico publicado en 2010

A report on a diagnostic digital workflow for esthetic dental rehabilitation using additive manufacturing technologies

artículo científico publicado en 2018

A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations

article

A strain gauge analysis comparing 4-unit veneered zirconium dioxide implant-borne fixed dental prosthesis on engaging and non-engaging abutments before and after torque application

artículo científico publicado en 2018

A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule

artículo científico publicado en 2019

Accuracy of a Digital Impression System Based on Active Triangulation Technology With Blue Light for Implants: Effect of Clinically Relevant Parameters.

artículo científico publicado en 2015

Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth.

artículo científico publicado en 2013

Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth.

artículo científico publicado en 2014

Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels.

artículo científico publicado en 2013

Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters.

artículo científico publicado en 2015

Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry

artículo científico publicado en 2018

Additive manufacturing technologies for processing zirconia in dental applications

artículo científico publicado en 2020

Adhesion Protocol for Bonding Abutments or Fixed Dental Prostheses on Titanium Bases in Implant-borne Reconstructions: How and Why?

artículo científico publicado en 2016

Adhesion behavior of conventional and high-translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology

artículo científico publicado en 2019

Adhesion of Resin Composite to Hydrofluoric Acid-exposed Enamel and Dentin in Repair Protocols ⬇️

artículo científico publicado el 22 de agosto de 2011

Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin ⬇️

artículo científico publicado el 21 de julio de 2011

Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods

scholarly article

Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after aging conditions

artículo científico publicado en 2010

Air abrasion of zirconia resin-bonded fixed dental prostheses prior to adhesive cementation: why and how?

artículo científico publicado el 1 de agosto de 2013

Airborne particle abrasion of zirconia fixed dental prostheses

artículo científico publicado en 2014

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

artículo científico publicado en 2013

An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla

artículo científico publicado en 2016

An introduction to silanes and their clinical applications in dentistry

artículo científico publicado en 2004

An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser

scholarly article

An update on applications of 3D printing technologies used for processing polymers used in implant dentistry

scientific article published on 01 July 2019

Analysis of Surface Roughness, Fracture Toughness, and Weibull Characteristics of Different Framework-Veneer Dental Ceramic Assemblies after Grinding, Polishing, and Glazing

artículo científico publicado en 2017

Analysis of tooth enamel after excessive bleaching: a study using scanning electron microscopy and energy dispersive x-ray spectroscopy

artículo científico publicado en 2010

Assessment of color parameters of composite resin shade guides using digital imaging versus colorimeter.

artículo científico publicado en 2010

Association between Oral Mucosal Lesions and Hygiene Habits in a Population of Removable Prosthesis Wearers.

artículo científico publicado en 2014

Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study ⬇️

artículo científico publicado el 12 de marzo de 2013

Bond Strength Comparison of Amalgam Repair Protocols Using Resin Composite in Situations With and Without Dentin Exposure ⬇️

artículo científico publicado el 1 de noviembre de 2010

Bond Strengths of One-Step Self-Etch Adhesives to Laser-Irradiated and Bur-Cut Dentin After Water Storage and Thermocycling ⬇️

artículo científico publicado el 15 de marzo de 2012

Bond strength and stability of 3 luting systems on a zirconia-dentin complex

artículo científico publicado en 2013

Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

artículo científico publicado en 2009

Bond strength durability of direct and indirect composite systems following surface conditioning for repair

artículo científico publicado en 2007

Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning

scientific article published on 01 June 2006

Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling.

artículo científico publicado en 2007

Bond strength of two resin cements on dentin using different cementation strategies.

artículo científico publicado en 2010

Bond strength of two resin cements to titanium after different surface conditioning methods

artículo científico publicado en 2012

Bonding of glass ceramic and indirect composite to non-aged and aged resin composite

artículo científico publicado el 1 de febrero de 2012

Bonding polycarbonate brackets to ceramic: effects of substrate treatment on bond strength

scientific article published on 01 August 2004

Can Cleansing Regimens Effectively Eliminate Saliva Contamination from Lithium Disilicate Ceramic Surface?

artículo científico publicado en 2017

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

artículo científico publicado en 2015

Can heat treatment procedures of pre-hydrolyzed silane replace hydrofluoric acid in the adhesion of resin cement to feldspathic ceramic?

artículo científico publicado en 2013

Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?

artículo científico publicado en 2018

Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

artículo científico publicado en 2021

Candida albicans adhesion on reinforced polymethylmethacrylate denture resin: effect of fibre architecture and exposure to saliva ⬇️

artículo científico publicado el 5 de diciembre de 2012

Chemical Composition, Knoop Hardness, Surface Roughness, and Adhesion Aspects of Additively Manufactured Dental Interim Materials

scientific article published on 08 December 2020

Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys

artículo científico publicado en 2020

Chipping of veneering ceramic on a lithium disilicate anterior single crown: Description of repair method and a fractographic failure analysis

scientific article published on 25 March 2019

Clinical Study of the Influence of Ambient Light Scanning Conditions on the Accuracy (Trueness and Precision) of an Intraoral Scanner

artículo científico publicado en 2019

Clinical Study of the Influence of Ambient Lighting Conditions on the Mesh Quality of an Intraoral Scanner

artículo científico publicado en 2020

Clinical Study on the Comparison of Masticatory Efficiency and Jaw Movement Before and After Temporomandibular Disorder Treatment ⬇️

artículo científico publicado el 1 de julio de 2013

Color dimensions of additive manufactured interim restorative dental material

scientific article published on 22 October 2019

Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium

scientific article published on 01 July 2018

Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer

artículo científico publicado el 1 de febrero de 2012

Comparison of conventional, photogrammetry, and intraoral scanning accuracy of complete-arch implant impression procedures evaluated with a coordinate measuring machine

scientific article published on 06 May 2020

Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide

Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only

artículo científico publicado en 2007

Comparison of two bond strength testing methodologies for bilayered all-ceramics.

artículo científico publicado en 2006

Conversion degree of indirect resin composites and effect of thermocycling on their physical properties

artículo científico publicado en 2009

Correction To: Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles

scientific article published on 01 January 2020

Could digital imaging be an alternative for digital colorimeters?

artículo científico publicado en 2009

Digital tools and 3D printing technologies integrated into the workflow of restorative treatment: A clinical report

scientific article published on 07 August 2018

Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique

artículo científico publicado en 2019

Discoloration of manually fabricated resins and industrially fabricated CAD/CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing

artículo científico publicado en 2012

Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering

artículo científico publicado en 2020

Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies

scientific article published on 10 July 2018

Does adhesive resin application contribute to resin bond durability on etched and silanized feldspathic ceramic?

artículo científico publicado en 2008

Does cad software affect the marginal and internal fit of milled full ceramic crowns?

scientific article published on 16 March 2022

Does rinsing following particle deposition methods have a negative effect on adhesion to titanium?

artículo científico publicado en 2013

Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin?

artículo científico publicado en 2006

Does the ultrasonic cleaning medium affect the adhesion of resin cement to feldspathic ceramic?

artículo científico publicado en 2012

Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

artículo científico publicado en 2014

Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging

artículo científico publicado en 2013

Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.

artículo científico publicado en 2011

Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness

scientific article published on 12 July 2018

Effect of Different Adhesion Strategies on Bond Strength of Resin Composite to Composite-dentin Complex ⬇️

artículo científico publicado el 19 de julio de 2012

Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion.

artículo científico publicado en 2015

Effect of Veneering Methods on Zirconia Framework-Veneer Ceramic Adhesion and Fracture Resistance of Single Crowns

artículo científico publicado en 2014

Effect of aging conditions on the repair bond strength of a microhybrid and a nanohybrid resin composite

artículo científico publicado en 2010

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

artículo científico publicado en 2015

Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading

artículo científico publicado en 2013

Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients

artículo científico

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

scientific article published on 01 April 2008

Effect of different CAD-CAM materials on the marginal and internal adaptation of endocrown restorations: An in vitro study

scientific article published on 23 April 2019

Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia

scholarly article

Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel

scientific article published on 11 June 2018

Effect of different cleaning regimens on the adhesion of resin to saliva-contaminated ceramics.

artículo científico publicado en 2014

Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis

scientific article published on 15 March 2019

Effect of different polymerization devices on the degree of conversion and the physical properties of an indirect resin composite

artículo científico publicado en 2010

Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic

artículo científico publicado en 2020

Effect of different surface treatments on adhesion of In-Ceram Zirconia to enamel and dentin substrates

artículo científico publicado el 1 de agosto de 2013

Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys

artículo científico publicado en 2004

Effect of early water contact on solubility of glass ionomer luting cements ⬇️

artículo científico publicado el 1 de octubre de 1998

Effect of fluorescent and nonfluorescent glaze pastes on lithium disilicate pressed ceramic color at different thicknesses

artículo científico publicado en 2020

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

scientific article published on 28 September 2020

Effect of length of LOCATOR abutment and cement type on retention to intraradicular dentin in overdentures

scientific article published on 17 July 2019

Effect of mechanical cycling on the flexural strength of densely sintered ceramics

artículo científico publicado en 2006

Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device

artículo científico publicado el 1 de junio de 2013

Effect of physicochemical aging conditions on the composite-composite repair bond strength

artículo científico publicado en 2007

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis

artículo científico publicado en 2016

Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin

artículo científico publicado en 2018

Effect of resin cement type on the microtensile bond strength to lithium disilicate ceramic and dentin using different test assemblies

artículo científico publicado en 2013

Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

artículo científico publicado en 2012

Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.

artículo científico publicado en 2010

Effect of silica coating on flexural strength of fiber posts

artículo científico publicado en 2006

Effect of static and cyclic loading on ceramic laminate veneers adhered to teeth with and without aged composite restorations

artículo científico publicado el 1 de diciembre de 2011

Effect of surface conditioning methods on the bond strength of luting cement to ceramics ⬇️

artículo científico publicado el 1 de diciembre de 2003

Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions

artículo científico publicado en 2006

Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex

artículo científico publicado en 2013

Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements

artículo científico publicado en 2012

Effect of surface finishing and polishing procedures on color properties and translucency of monolithic zirconia restorations at varying thickness

artículo científico publicado en 2020

Effect of surface modification on the bond strength between zirconia and resin cement

scientific article published on 01 April 2013

Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion

scholarly article

Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

artículo científico publicado en 2008

Effect of the cross-linking silane concentration in a novel silane system on bonding resin-composite cement

artículo científico publicado en 2008

Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.

artículo científico publicado en 2008

Effect of various veneering techniques on mechanical strength of computer-controlled zirconia framework designs.

artículo científico publicado en 2014

Effects of Different Surface Conditioning Methods on the Bond Strength of Composite Resin to Amalgam ⬇️

artículo científico publicado el 1 de mayo de 2011

Effects of air-abrasion pressure on the resin bond strength to zirconia: a combined cyclic loading and thermocycling aging study.

artículo científico

Evaluation of Different Thickness, Die Color, and Resin Cement Shade for Veneers of Multilayered CAD/CAM Blocks

artículo científico publicado en 2015

Evaluation of air‐particle abrasion of Y‐TZPwith different particles using microstructural analysis ⬇️

artículo científico publicado el 1 de junio de 2013

Evaluation of bond strength of various margin ceramics to a zirconia ceramic

artículo científico publicado en 2008

Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study

artículo científico publicado el 1 de marzo de 2011

Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics

artículo científico publicado en 2012

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

artículo científico publicado en 2008

Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles

artículo científico publicado en 2019

Evaluation of resin adhesion to zirconia ceramic using some organosilanes

artículo científico publicado en 2006

Evaluation of the Adaptation and Fracture Resistance of Three CAD-CAM Resin Ceramics: An In vitro Study

scientific article published on 01 May 2019

Fiber-Reinforced Composites for Dental Applications

artículo científico publicado en 2018

Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments

artículo científico publicado en 2015

Fiber-reinforced composites in fixed prosthodontics-Quo vadis?

artículo científico publicado en 2017

Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia

artículo científico publicado en 2020

Fracture Strength and Failure Mode of Maxillary Implant‐Supported Provisional Single Crowns: A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments ⬇️

artículo científico publicado el 22 de diciembre de 2010

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

artículo científico publicado en 2016

Fracture load and failure analysis of zirconia single crowns veneered withpressed and layered ceramics after chewing simulation

artículo científico publicado en 2011

Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness

artículo científico publicado en 2018

Fracture of Zirconia Abutment with Metallic Insertion on Anterior Single Titanium Implant with Internal Hexagon: Retrieval Analysis of a Failure.

artículo científico publicado en 2016

Fracture resistance and failure modes of endocrowns manufactured with different CAD/CAM materials under axial and lateral loading

scientific article published on 08 May 2019

Fracture resistance of crowns cemented on titanium and zirconia implant abutments: a comparison of monolithic versus manually veneered all-ceramic systems

artículo científico publicado en 2012

Fracture resistance of direct inlay-retained adhesive bridges: Effect of pontic material and occlusal morphology ⬇️

artículo científico publicado el 1 de enero de 2012

Fracture resistance, failure mode and stress concentration in a modified endocrown design

scientific article published on 07 August 2020

Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis

artículo científico publicado en 2016

Fracture strength of zirconia implant abutments on narrow diameter implants with internal and external implant abutment connections: A study on the titanium resin base concept.

artículo científico publicado en 2018

Gender difference in prevalence of signs and symptoms of temporomandibular joint disorders: a retrospective study on 243 consecutive patients

artículo científico publicado en 2012

General health, dental status and perceived dental treatment needs of an elderly population in Istanbul ⬇️

artículo científico publicado el 1 de marzo de 2011

Heat treatment of pre-hydrolyzed silane increases adhesion of phosphate monomer-based resin cement to glass ceramic

artículo científico publicado en 2015

How to repair ceramic chipping or fracture in metal-ceramic fixed dental prostheses intraorally: step-by-step procedures

artículo científico publicado en 2014

Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study

artículo científico publicado en 2011

Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation

artículo científico publicado en 2012

Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia

artículo científico publicado en 2012

Impact of the ambient light illuminance conditions on the shade matching capabilities of an intraoral scanner

scientific article published on 21 September 2020

Implant Prosthodontic Discrepancy of Complete-Arch Co-Cr Implant Frameworks Manufactured Through Selective Laser Melting Additive Manufacturing Technology Using a Coordinate Measuring Machine

scientific article published on 19 February 2019

Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review

artículo científico publicado en 2013

Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies

artículo científico publicado en 2016

In-vitro orthodontic bond strength testing: a systematic review and meta-analysis

artículo científico publicado en 2010

Influence of Acid Etching and Universal Adhesives on the Bond Strength to Dentin

scientific article published on 01 June 2020

Influence of ZrO2 Addition on Structural and Biological Activity of Phosphate Glasses for Bone Regeneration

scientific article published on 12 September 2020

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

artículo científico publicado en 2013

Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns.

artículo científico publicado en 2009

Influence of different maintenance times of torque application on the removal torque values to loosen the prosthetic abutment screws of external hexagon implants

artículo científico publicado en 2013

Influence of fluoride- or triclosan-based desensitizing agents on adhesion of resin cements to dentin

artículo científico publicado en 2009

Influence of powdered dentin on the shear bond strength of dentin bonding systems ⬇️

artículo científico publicado el 1 de enero de 2012

Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An in vitro study

scientific article published on 22 April 2020

Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts

scientific article published on 28 November 2019

Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast

artículo científico publicado en 2020

Influence of silane heat treatment on bond strength of resin cement to a feldspathic ceramic ⬇️

artículo científico publicado el 20 de mayo de 2011

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks.

artículo científico publicado en 2007

Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces ⬇️

artículo científico publicado el 1 de mayo de 2003

Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities

artículo científico publicado en 2019

Interfacial shear bond strength between different base metal alloys and five low fusing feldspathic ceramic systems ⬇️

artículo científico publicado el 14 de mayo de 2012

Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners

scientific article published on 18 December 2019

Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners

scientific article published on 20 December 2019

Intraoral repair protocol for chipping or fracture of veneering ceramic in zirconia fixed dental prostheses

artículo científico publicado en 2015

Laboratory and clinical considerations on prosthetic zirconia infrastructures for implants

artículo científico publicado en 2013

Load-bearing capacities of ultra-thin occlusal veneers bonded to dentin

scientific article published on 13 April 2019

Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

artículo científico publicado en 2011

Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens

artículo científico publicado en 2012

Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers ⬇️

artículo científico publicado el 3 de marzo de 2012

Loss of surface enamel after bracket debonding: an in-vivo and ex-vivo evaluation.

artículo científico publicado en 2010

Luting cements for dental applications

Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system

artículo científico publicado en 2011

Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography

artículo científico publicado en 2018

Marginal discrepancy of monolithic and veneered all-ceramic crowns on titanium and zirconia implant abutments before and after adhesive cementation: a scanning electron microscopy analysis

artículo científico publicado en 2013

Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements

artículo científico publicado en 2014

Mechanical and Thermal Stress Analysis of Cervical Resin Composite Restorations Containing Different Ratios of Zinc Oxide Nanoparticles: A 3D Finite Element Study

artículo científico publicado en 2022

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

artículo científico publicado en 2008

Metal additive manufacturing technologies: literature review of current status and prosthodontic applications

artículo científico publicado en 2019

Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics.

artículo científico publicado en 2008

Micro-shear bond strength of adhesive resins to enamel at different relative humidity conditions ⬇️

artículo científico publicado el 1 de enero de 2013

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment.

artículo científico publicado en 2011

Microporosities in 3D-Printed Tricalcium-Phosphate-Based Bone Substitutes Enhance Osteoconduction and Affect Osteoclastic Resorption

scientific article published on 04 December 2020

Microshear bond strength and finite element analysis of resin composite adhesion to press-on-metal ceramic for repair actions after various conditioning methods

artículo científico publicado en 2014

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

scientific article published on 26 December 2006

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.

artículo científico publicado en 2005

Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia before and after aging

artículo científico publicado en 2007

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

artículo científico publicado en 2016

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

artículo científico publicado en 2010

Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion.

artículo científico publicado en 2013

Peri-implant tissue management after immediate implant placement using a customized healing abutment

scientific article published on 03 July 2019

Periodontal phenotype: A review of historical and current classifications evaluating different methods and characteristics

artículo científico publicado en 2020

Physiochemical properties of a bioceramic-based root canal sealer reinforced with multi-walled carbon nanotubes, titanium carbide and boron nitride biomaterials

artículo científico publicado en 2020

Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: Up to 4.5-year clinical follow-up ⬇️

artículo científico publicado el 6 de octubre de 2011

Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine.

artículo científico publicado en 2017

Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review

artículo científico publicado en 2011

Prospective clinical study of zirconia-based posterior four-unit fixed dental prostheses: four-year follow-up.

artículo científico publicado en 2012

Prosthodontic considerations in the implant-supported all-ceramic restoration of congenitally missing maxillary lateral incisor: a clinical report

artículo científico publicado en 2013

Publish or perish, publish and perish

artículo científico publicado en 2014

Radioactive Potential of Zirconium-dioxide Used for Dental Applications ⬇️

artículo científico publicado el 12 de junio de 2014

Radiographic and Clinical Findings of Single-Visit Root Canal Treatments with Apical Enlargement in Necrotic Teeth: A Retrospective Cohort Study

scientific article published on 28 September 2020

Radiopacity of different shades of resin-based restorative materials compared to human and bovine teeth

artículo científico publicado el 1 de julio de 2012

Randomized clinical trial of indirect resin composite and ceramic veneers: up to 3-year follow-up

artículo científico publicado el 1 de abril de 2013

Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part III: Marginal and internal fit

artículo científico publicado en 2018

Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites ⬇️

artículo científico publicado el 2 de junio de 2012

Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part III: marginal and internal fit.

artículo científico publicado en 2016

Repair Bond Strength of a CAD/CAM Nanoceramic Resin and Direct Composite Resin: Effect of Aging and Surface Conditioning Methods

scientific article published on 01 January 2020

Repair Protocol for Amalgam Fillings with and Without Cusp Fracture: How and Why?

artículo científico publicado en 2016

Repair bond strength of a resin composite to alumina-reinforced feldspathic ceramic

artículo científico publicado en 2006

Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing

artículo científico publicado en 2012

Repair of silorane composite--using the same substrate or a methacrylate-based composite?

artículo científico publicado en 2011

Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability.

artículo científico publicado en 2011

Restoration Strategies of Endodontically Treated Teeth among Dental Practitioners in Saudi Arabia. A Nationwide Pilot Survey

artículo científico publicado en 2018

Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis

artículo científico publicado en 2019

Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis

scientific article published on 05 August 2019

Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements

artículo científico publicado en 2013

Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report

artículo científico publicado en 2019

Strain gauge analysis of the effect of porcelain firing simulation on the prosthetic misfit of implant-supported frameworks.

artículo científico publicado en 2012

Surface Conditioning and Bonding Protocol for Nanocomposite Indirect Restorations: How and Why?

artículo científico publicado en 2016

Surface Conditioning and Bonding Protocol for Polymer-infiltrated Ceramic: How and Why?

artículo científico publicado en 2016

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

artículo científico publicado en 2011

Surface conditioning protocol for the chairside repair of polymeric denture teeth

artículo científico publicado en 2015

Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride

artículo científico publicado en 2010

Tensile Strength and Failure Types of Direct and Indirect Resin Composite Copings for Perio-Overdentures Luted Using Different Adhesive Cementation Modalities

artículo científico publicado en 2020

The Effect of Water or Wax-based Binders on the Chemical and Morphological Characteristics of the Margin Ceramic-Framework Interface

artículo científico publicado en 2015

The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal

artículo científico publicado en 2004

The effect of ceramic thickness on opalescence

artículo científico publicado en 2020

The effect of glazing on the biaxial flexural strength of different zirconia core materials

artículo científico publicado el 1 de enero de 2011

The effect of scanning the palate and scan body position on the accuracy of complete-arch implant scans

scientific article published on 25 July 2019

The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio

artículo científico publicado en 2012

The efficacy of two prototype chewing gums for the removal of extrinsic tooth stain ⬇️

artículo científico publicado el 1 de abril de 2003

The erosion kinetics of conventional and resin-modified glass-ionomer luting cements in acidic buffer solutions ⬇️

artículo científico publicado el 1 de enero de 2012

The fracture load and failure types of veneered anterior zirconia crowns: an analysis of normal and Weibull distribution of complete and censored data

artículo científico publicado en 2011

The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins

artículo científico publicado en 2011

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns.

artículo científico publicado en 2007

The influence of grain size on low-temperature degradation of dental zirconia

artículo científico publicado en 2011

Treatment of surface contamination of lithium disilicate ceramic before adhesive luting

scientific article published on 01 February 2020

Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists

artículo científico publicado en 2012

Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists

artículo científico publicado en 2013

Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations

artículo científico publicado en 2018

Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants.

artículo científico publicado en 2014

Wear analysis and topographical properties of monolithic zirconia and CoCr against human enamel after polishing and glazing procedures

artículo científico publicado en 2020

Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique

artículo científico publicado en 2019

Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique

scientific article published on 03 May 2020

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

artículo científico publicado en 2008

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda