Lista de obras -

A LIQUID PHASE SINTERING MODEL: APPLICATION TO Si3N4 AND WC-Co

artículo científico publicado en 1997

A MULTISCALE APPROACH TO FAILURE ASSESSMENT IN DEPLOYMENT FOR CARDIOVASCULAR STENTS

artículo científico publicado en 2010

A Phenomenological Model of Corrosion in Biodegradable Metallic Stents

artículo científico publicado en 2010

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents.

artículo científico

A comparison of two quasi-static computational models for assessment of intra-myocardial injection as a therapeutic strategy for heart failure

scientific article published on 05 August 2019

A finite element prediction of strain on cells in a highly porous collagen-glycosaminoglycan scaffold

artículo científico publicado en 2008

A novel flow chamber for biodegradable alloy assessment in physiologically realistic environments

artículo científico publicado en 2013

A review on dielectric elastomer actuators, technology, applications, and challenges

artículo científico publicado en 2008

Accuracy of laser cutting and its influence on mechanical behavior of stents

artículo científico publicado en 2003

An atomistic study of void growth in single crystalline copper

artículo científico publicado en 2000

An experimental and computational investigation of the material behaviour of discrete homogenous iliofemoral and carotid atherosclerotic plaque constituents

artículo científico publicado en 2020

An ovine in vivo framework for tracheobronchial stent analysis.

artículo científico publicado en 2017

Anterior cruciate ligament graft tensioning. Is the maximal sustained one-handed pull technique reproducible?

artículo científico publicado en 2011

Application of closure based fatigue modelling methodology to Al–SiC MMCs

artículo científico publicado en 2003

Arterial and Atherosclerotic Plaque Biomechanics with Application to Stent Angioplasty Modeling

artículo científico publicado en 2016

Behavior of Human Mesenchymal Stem Cells in Fibrin-Based Vascular Tissue Engineering Constructs

artículo científico publicado en 2010

Bioreactors for cardiovascular cell and tissue growth: a review.

artículo científico publicado en 2003

Characterization of strut indentation during mechanical thrombectomy in acute ischemic stroke clot analogs

artículo científico publicado en 2019

Comparing coronary stent material performance on a common geometric platform through simulated bench testing ⬇️

artículo científico publicado el 3 de marzo de 2012

Comparison of Covered Laser-cut and Braided Respiratory Stents: From Bench to Pre-Clinical Testing

scientific article published on 01 May 2019

Comparison of computational modelling techniques for braided stent analysis

scientific article published on 10 September 2019

Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body

artículo científico publicado en 2010

Computational Analysis of the Utilisation of the Shape Memory Effect and Balloon Expansion in Fully Polymeric Stent Deployment

artículo científico publicado en 2017

Computational Examination of the Effect of Material Inhomogeneity on the Necking of Stent Struts Under Tensile Loading

artículo científico publicado en 2007

Computational Modeling for Analysis and Design of Metallic Biodegradable Stents1

artículo científico publicado en 2015

Computational Modeling of the Mechanical Performance of a Magnesium Stent Undergoing Uniform and Pitting Corrosion in a Remodeling Artery

artículo científico publicado en 2017

Computational modeling of metal matrix composite materials—I. Isothermal deformation patterns in ideal microstructures

artículo científico publicado en 1993

Computational modeling of metal matrix composite materials—II. Isothermal stress-strain behavior

artículo científico publicado en 1993

Computational modeling of metal matrix composite materials—III. Comparisons with phenomenological models

artículo científico publicado en 1993

Computational modeling of metal matrix composite materials—IV. Thermal deformations

artículo científico publicado en 1993

Computational modeling of microstructures

artículo científico publicado en 1989

Computational modelling of magnesium stent mechanical performance in a remodelling artery: Effects of multiple remodelling stimuli

scientific article published on 23 August 2019

Computational modelling of ovine critical-sized tibial defects with implanted scaffolds and prediction of the safety of fixator removal

artículo científico publicado en 2015

Computational modelling of the cyclic deformation of aluminium and aluminium matrix composites

artículo científico publicado en 1996

Computational modelling of the extrusion of an Al-SiC metal matrix composite using macroscale and microscale methods

artículo científico publicado en 2007

Computer Simulation of the Mechanical Behaviour of Implanted Biodegradable Stents in a Remodelling Artery

Development of a novel bioreactor to apply shear stress and tensile strain simultaneously to cell monolayers

artículo científico publicado en 2006

Development of an in vitro model of calcified cerebral emboli in acute ischemic stroke for mechanical thrombectomy evaluation

artículo científico publicado en 2020

Early results and lessons learned using the streamliner multilayer flow modulator in the management of complex thoracoabdominal aortic aneurysms and chronic symptomatic aortic dissection

artículo científico publicado en 2020

Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance.

artículo científico publicado en 2016

Effects of nerve bundle geometry on neurotrauma evaluation

artículo científico publicado en 2018

Effects of nerve bundle geometry on neurotrauma evaluation

artículo científico publicado en 2017

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury

scientific article published on 01 July 2017

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury.

artículo científico publicado en 2017

Electro-thermal equivalent 3D Finite Element Model of a Single Neuron

artículo científico publicado en 2017

Endovascular versus conventional open surgical repair for thoracoabdominal aortic aneurysms

Endovascular versus open surgical repair for complicated chronic type B aortic dissection

Engineering Assisted Surgery™: A route for digital design and manufacturing of customised maxillofacial implants

artículo científico publicado en 2007

Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials

artículo científico publicado en 2015

Evaluating the interaction of a tracheobronchial stent in an ovine in-vivo model

artículo científico publicado en 2017

Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials

scientific article published on 02 December 2014

Evaluation of human endothelial cells post stent deployment in a cardiovascular simulator in vitro

artículo científico publicado en 2009

Experimental characterisation for micromechanical modelling of CoCr stent fatigue.

artículo científico publicado en 2013

Fabrication and characterization of gefitinib-releasing polyurethane foam as a coating for drug-eluting stent in the treatment of bronchotracheal cancer

artículo científico publicado en 2017

Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds

artículo científico publicado en 2012

Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach.

artículo científico publicado en 2012

Finite Element Simulation and Experimental Determination of Residual Stresses after Extrusion Process in Metal Matrix Composites

artículo científico publicado en 2005

Finite element comparison of performance related characteristics of balloon expandable stents

artículo científico publicado en 2007

Gefitinib/gefitinib microspheres loaded polyurethane constructs as drug-eluting stent coating

artículo científico publicado en 2017

Gene-eluting stents: non-viral, liposome-based gene delivery of eNOS to the blood vessel wall in vivo results in enhanced endothelialization but does not reduce restenosis in a hypercholesterolemic model

artículo científico publicado en 2011

HUVEC ICAM-1 and VCAM-1 synthesis in response to potentially athero-prone and athero-protective mechanical and nicotine chemical stimuli.

artículo científico publicado en 2010

Head-to-nerve analysis of electromechanical impairments of diffuse axonal injury

artículo científico publicado en 2018

Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties

artículo científico publicado en 2008

Investigating the Mechanical Behavior of Clot Analogues Through Experimental and Computational Analysis

artículo científico publicado en 2020

Investigation of the strengthening of particulate reinforced composites using different analytical and finite element models

artículo científico publicado en 1999

Laser Sintering for the Fabrication of Tissue Engineering Scaffolds ⬇️

artículo científico publicado el 1 de enero de 2012

Liposomal surface coatings of metal stents for efficient non-viral gene delivery to the injured vasculature

artículo científico publicado en 2013

Mechanical and Corrosion Testing of Magnesium WE43 Specimens for Pitting Corrosion Model Calibration

artículo científico publicado en 2018

Mechanical behavior of in vitro blood clots and the implications for acute ischemic stroke treatment

artículo científico publicado en 2019

Medical Stents: State of the Art and Future Directions.

artículo científico publicado en 2015

Methodology for modelling the small crack fatigue behaviour of aluminium alloys

artículo científico publicado en 2002

Micromechanical Modeling of the Static Loading of an Al 359-SiC MMC

artículo científico publicado en 2005

Micromechanical modelling of cortical bone

artículo científico publicado en 2007

Micromechanical modelling of ductile crack growth in the binder phase of WC–Co

artículo científico publicado en 2003

Micromechanical modelling of the static and cyclic loading of an Al 2124-SiC MMC

artículo científico publicado en 2001

Micro–macro wear–fatigue of modular hip implant taper-lock coupling

artículo científico publicado en 2013

Modeling of Biodegradable Polyesters With Applications to Coronary Stents

artículo científico publicado en 2017

Modelling the degradation and elastic properties of poly(lactic-co-glycolic acid) films and regular open-cell tissue engineering scaffolds.

artículo científico publicado en 2015

Modelling the thermo-mechanical behaviour of an Al alloy-SiCp composite effects of particle shape and microscale fracture

artículo científico publicado en 1994

Multi-axial mechanical stimulation of HUVECs demonstrates that combined loading is not equivalent to the superposition of individual wall shear stress and tensile hoop stress components

artículo científico publicado en 2009

Multiscale Computational Modeling: Multiscale Experimental and Computational Modeling Approaches to Characterize Therapy Delivery to the Heart from an Implantable Epicardial Biomaterial Reservoir (Adv. Healthcare Mater. 16/2019)

artículo científico publicado en 2019

Multiscale Experimental and Computational Modeling Approaches to Characterize Therapy Delivery to the Heart from an Implantable Epicardial Biomaterial Reservoir

scientific article published on 19 July 2019

Nanoindentation of solvent-cast and compression-moulded poly(lactic-co-glycolic acid) to determine elastic modulus and hardness

artículo científico publicado en 2016

Nanomechanical properties of poly(lactic-co-glycolic) acid film during degradation.

artículo científico publicado en 2014

Neurotrauma evaluation in a 3D electro-mechanical model of a nerve bundle

artículo científico publicado en 2017

Optimizing the design of a bioabsorbable metal stent using computer simulation methods

artículo científico publicado en 2013

Polymer-coated microparticle scaffolds engineered for potential use in musculoskeletal tissue regeneration

artículo científico publicado en 2021

Preclinical trial of a novel surface architecture for improved primary fixation of cementless orthopaedic implants

artículo científico publicado en 2014

Predicting the Effects of Overloads on Fatigue Crack Growth in an Al-SiC MMC Using a Computational Model

artículo científico publicado en 2004

Predicting the elastic properties of selective laser sintered PCL/β-TCP bone scaffold materials using computational modelling.

artículo científico publicado en 2013

Profiling the Shear Stress of Atherosclerosis; A Genomic View

artículo científico publicado en 2004

PulmoStent: In Vitro to In Vivo Evaluation of a Tissue Engineered Endobronchial Stent.

artículo científico publicado en 2016

Real-time ultrasound in the diagnosis of congenital dislocation and dysplasia of the hip

artículo científico publicado en 1985

Response of mesenchymal stem cells to the biomechanical environment of the endothelium on a flexible tubular silicone substrate.

artículo científico publicado en 2008

Selection and fabrication of a non-woven polycarbonate urethane cover for a tissue engineered airway stent

artículo científico publicado en 2016

Shear Stress Within Trabecular Bone Marrow due to Low Magnitude High Frequency Vibration

artículo científico publicado en 2011

Simulation of void growth in WC-Co hardmetals using crystal plasticity theory

artículo científico publicado en 1997

Strain on the human sciatic nerve in vivo during movement of the hip and knee

artículo científico publicado en 2003

Sustained release of targeted cardiac therapy with a replenishable implanted epicardial reservoir

artículo científico publicado en 2018

The effect of physiological cyclic stretch on the cell morphology, cell orientation and protein expression of endothelial cells.

artículo científico publicado en 2007

The stress-strain behavior of coronary stent struts is size dependent

artículo científico publicado en 2003

Thermo-electrical equivalents for simulating the electro-mechanical behavior of biological tissue

artículo científico publicado en 2015

Wear of a thin surface coating: modelling and experimental investigations

artículo científico publicado en 2002

X-ray micro-tomography of a coronary stent deployed in a model artery

artículo científico publicado en 2006

Lista de obras de

A LIQUID PHASE SINTERING MODEL: APPLICATION TO Si3N4 AND WC-Co

A MULTISCALE APPROACH TO FAILURE ASSESSMENT IN DEPLOYMENT FOR CARDIOVASCULAR STENTS

A Phenomenological Model of Corrosion in Biodegradable Metallic Stents

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents.

A comparison of two quasi-static computational models for assessment of intra-myocardial injection as a therapeutic strategy for heart failure

A finite element prediction of strain on cells in a highly porous collagen-glycosaminoglycan scaffold

A novel flow chamber for biodegradable alloy assessment in physiologically realistic environments

A review on dielectric elastomer actuators, technology, applications, and challenges

Accuracy of laser cutting and its influence on mechanical behavior of stents

An atomistic study of void growth in single crystalline copper

An experimental and computational investigation of the material behaviour of discrete homogenous iliofemoral and carotid atherosclerotic plaque constituents

An ovine in vivo framework for tracheobronchial stent analysis.

Anterior cruciate ligament graft tensioning. Is the maximal sustained one-handed pull technique reproducible?

Application of closure based fatigue modelling methodology to Al–SiC MMCs

Arterial and Atherosclerotic Plaque Biomechanics with Application to Stent Angioplasty Modeling

Behavior of Human Mesenchymal Stem Cells in Fibrin-Based Vascular Tissue Engineering Constructs

Bioreactors for cardiovascular cell and tissue growth: a review.

Characterization of strut indentation during mechanical thrombectomy in acute ischemic stroke clot analogs

Comparing coronary stent material performance on a common geometric platform through simulated bench testing ⬇️

Comparison of Covered Laser-cut and Braided Respiratory Stents: From Bench to Pre-Clinical Testing

Comparison of computational modelling techniques for braided stent analysis

Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body

Computational Analysis of the Utilisation of the Shape Memory Effect and Balloon Expansion in Fully Polymeric Stent Deployment

Computational Examination of the Effect of Material Inhomogeneity on the Necking of Stent Struts Under Tensile Loading

Computational Modeling for Analysis and Design of Metallic Biodegradable Stents1

Computational Modeling of the Mechanical Performance of a Magnesium Stent Undergoing Uniform and Pitting Corrosion in a Remodeling Artery

Computational modeling of metal matrix composite materials—I. Isothermal deformation patterns in ideal microstructures

Computational modeling of metal matrix composite materials—II. Isothermal stress-strain behavior

Computational modeling of metal matrix composite materials—III. Comparisons with phenomenological models

Computational modeling of metal matrix composite materials—IV. Thermal deformations

Computational modeling of microstructures

Computational modelling of magnesium stent mechanical performance in a remodelling artery: Effects of multiple remodelling stimuli

Computational modelling of ovine critical-sized tibial defects with implanted scaffolds and prediction of the safety of fixator removal

Computational modelling of the cyclic deformation of aluminium and aluminium matrix composites

Computational modelling of the extrusion of an Al-SiC metal matrix composite using macroscale and microscale methods

Computer Simulation of the Mechanical Behaviour of Implanted Biodegradable Stents in a Remodelling Artery

Development of a novel bioreactor to apply shear stress and tensile strain simultaneously to cell monolayers

Development of an in vitro model of calcified cerebral emboli in acute ischemic stroke for mechanical thrombectomy evaluation

Early results and lessons learned using the streamliner multilayer flow modulator in the management of complex thoracoabdominal aortic aneurysms and chronic symptomatic aortic dissection

Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance.

Effects of nerve bundle geometry on neurotrauma evaluation

Effects of nerve bundle geometry on neurotrauma evaluation

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury.

Electro-thermal equivalent 3D Finite Element Model of a Single Neuron

Endovascular versus conventional open surgical repair for thoracoabdominal aortic aneurysms

Endovascular versus open surgical repair for complicated chronic type B aortic dissection

Engineering Assisted Surgery™: A route for digital design and manufacturing of customised maxillofacial implants

Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials

Evaluating the interaction of a tracheobronchial stent in an ovine in-vivo model

Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials

Evaluation of human endothelial cells post stent deployment in a cardiovascular simulator in vitro

Experimental characterisation for micromechanical modelling of CoCr stent fatigue.

Fabrication and characterization of gefitinib-releasing polyurethane foam as a coating for drug-eluting stent in the treatment of bronchotracheal cancer

Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds

Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach.

Finite Element Simulation and Experimental Determination of Residual Stresses after Extrusion Process in Metal Matrix Composites

Finite element comparison of performance related characteristics of balloon expandable stents

Gefitinib/gefitinib microspheres loaded polyurethane constructs as drug-eluting stent coating

Gene-eluting stents: non-viral, liposome-based gene delivery of eNOS to the blood vessel wall in vivo results in enhanced endothelialization but does not reduce restenosis in a hypercholesterolemic model

HUVEC ICAM-1 and VCAM-1 synthesis in response to potentially athero-prone and athero-protective mechanical and nicotine chemical stimuli.

Head-to-nerve analysis of electromechanical impairments of diffuse axonal injury

Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties

Investigating the Mechanical Behavior of Clot Analogues Through Experimental and Computational Analysis

Investigation of the strengthening of particulate reinforced composites using different analytical and finite element models

Laser Sintering for the Fabrication of Tissue Engineering Scaffolds ⬇️

Liposomal surface coatings of metal stents for efficient non-viral gene delivery to the injured vasculature

Mechanical and Corrosion Testing of Magnesium WE43 Specimens for Pitting Corrosion Model Calibration

Mechanical behavior of in vitro blood clots and the implications for acute ischemic stroke treatment

Medical Stents: State of the Art and Future Directions.

Methodology for modelling the small crack fatigue behaviour of aluminium alloys

Micromechanical Modeling of the Static Loading of an Al 359-SiC MMC

Micromechanical modelling of cortical bone

Micromechanical modelling of ductile crack growth in the binder phase of WC–Co

Micromechanical modelling of the static and cyclic loading of an Al 2124-SiC MMC

Micro–macro wear–fatigue of modular hip implant taper-lock coupling

Modeling of Biodegradable Polyesters With Applications to Coronary Stents

Modelling the degradation and elastic properties of poly(lactic-co-glycolic acid) films and regular open-cell tissue engineering scaffolds.

Modelling the thermo-mechanical behaviour of an Al alloy-SiCp composite effects of particle shape and microscale fracture