Lista de obras -

All-polymer organic semiconductor laser chips: Parallel fabrication and encapsulation ⬇️

artículo científico publicado el 22 de noviembre de 2010

Analysis of untreated cross sections of Cu(In,Ga)Se2 thin-film solar cells with varying Ga content using Kelvin probe force microscopy

Bioinspired phase-separated disordered nanostructures for thin photovoltaic absorbers

artículo científico publicado en 2017

Coated and Printed Perovskites for Photovoltaic Applications

artículo científico publicado en 2019

Colloidally Stable Silicon Nanocrystals with Near‐Infrared Photoluminescence for Biological Fluorescence Imaging ⬇️

artículo científico publicado el 8 de julio de 2011

Color-Selective Printed Organic Photodiodes for Filterless Multichannel Visible Light Communication

artículo científico publicado en 2020

Comment on "Room-Temperature Continuous-Wave Operation of Organometal Halide Perovskite Lasers"

scientific article published on 01 November 2019

Continuous wave amplified spontaneous emission in phase-stable lead halide perovskites

artículo científico publicado en 2019

Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode ⬇️

artículo científico publicado el 12 de marzo de 2012

Correction to “Correlation of device Performance and Fermi Level Shift in the Emitting Layer of Organic Light-Emitting Diodes with Amine-Based Electron Injection Layers”

artículo científico publicado en 2018

Coupled Nanoantenna Plasmon Resonance Spectra from Two-Photon Laser Excitation ⬇️

artículo científico publicado el 13 de octubre de 2010

Cross sections of operating Cu(In,Ga)Se2 thin-film solar cells under defined white light illumination analyzed by Kelvin probe force microscopy

artículo científico publicado en 2013

Design and Color Flexibility for Inkjet-Printed Perovskite Photovoltaics

artículo científico publicado en 2018

Design of plasmonic grating structures towards optimum signal discrimination for biosensing applications ⬇️

artículo científico publicado el 7 de mayo de 2012

Disordered diffraction gratings tailored by shape-memory based wrinkling and their application to photovoltaics

artículo científico publicado en 2018

Drying Dynamics of Solution‐Processed Perovskite Thin‐Film Photovoltaics: In Situ Characterization, Modeling, and Process Control

Efficient All-Evaporated pin-Perovskite Solar Cells: A Promising Approach Toward Industrial Large-Scale Fabrication

Efficient waveguide mode extraction in white organic light emitting diodes using ITO-anodes with integrated MgF_2-columns ⬇️

artículo científico publicado el 12 de marzo de 2012

Electron‐Beam‐Evaporated Nickel Oxide Hole Transport Layers for Perovskite‐Based Photovoltaics

artículo científico publicado en 2019

Energy yield modelling of perovskite/silicon two-terminal tandem PV modules with flat and textured interfaces

Energy yield of bifacial textured perovskite/silicon tandem photovoltaic modules

artículo científico publicado en 2020

Enhanced Photoluminescence in Quantum Dots–Porous Polymer Hybrid Films Fabricated by Microcellular Foaming

Fabrication of hierarchical photonic nanostructures inspired by Morpho butterflies utilizing laser interference lithography

article by Radwanul H Siddique et al published 7 April 2015 in Optical materials express

Flexible Inkjet-Printed Triple Cation Perovskite X-ray Detectors

artículo científico publicado en 2020

Flexible planar microfluidic chip employing a light emitting diode and a PIN-photodiode for portable flow cytometers ⬇️

artículo científico publicado el 15 de noviembre de 2011

Gold nanoantenna resonance diagnostics via transversal particle plasmon luminescence ⬇️

artículo científico publicado el 14 de febrero de 2011

High Efficiency Perovskite‐Silicon Tandem Solar Cells: Effect of Surface Coating versus Bulk Incorporation of 2D Perovskite

artículo científico publicado en 2020

High-Brightness Perovskite Light-Emitting Diodes Using a Printable Silver Microflake Contact

artículo científico publicado en 2020

High-Performance Ag-Se-Based n-Type Printed Thermoelectric Materials for High Power Density Folded Generators

scientific article published on 08 April 2020

Influence of the Ga Content on the Optical and Electrical Properties of CuIn $_{{\bm 1}\hbox{--}{\bm x}}$Ga $_{\bm x}$Se$_{\bm 2}$ Thin-Film Solar Cells

Inkjet-Printed Triple Cation Perovskite Solar Cells

Inkjet‐Printed Micrometer‐Thick Perovskite Solar Cells with Large Columnar Grains

artículo científico publicado en 2019

Investigations of singlet and triplet diffusion in thermally activated delayed-fluorescence emitters: Implications for hyperfluorescence

scholarly article in Physical Review B, vol. 100 no. 4, July 2019

Low-Temperature Electroluminescence Excitation Mapping of Excitons and Trions in Short-Channel Monochiral Carbon Nanotube Devices

scientific article published on 10 January 2020

Low-cost label-free biosensors using photonic crystals embedded between crossed polarizers ⬇️

artículo científico publicado el 30 de agosto de 2010

Methodology of energy yield modelling of perovskite-based multi-junction photovoltaics

scientific article published on 01 April 2019

Multicolor silicon light-emitting diodes (SiLEDs).

artículo científico publicado en 2013

N-Fused quinoxalines and benzoquinoxalines as attractive emitters for organic light emitting diodes

artículo científico publicado en 2013

Non-Fullerene-Based Printed Organic Photodiodes with High Responsivity and Megahertz Detection Speed

scientific article published on 03 December 2018

On the interplay of waveguide modes and leaky modes in corrugated OLEDs ⬇️

artículo científico publicado el 4 de julio de 2011

Perovskite Solar Cells with All‐Inkjet‐Printed Absorber and Charge Transport Layers

artículo científico publicado en 2020

Plastic lab-on-a-chip for fluorescence excitation with integrated organic semiconductor lasers ⬇️

artículo científico publicado el 25 de abril de 2011

Pyrolysis-induced shrinking of three-dimensional structures fabricated by two-photon polymerization: experiment and theoretical model

artículo científico publicado en 2019

Reevaluation of the beneficial effect of Cu(In,Ga)Se2 grain boundaries using Kelvin probe force microscopy

article published in 2012

Rigorous wave-optical treatment of photon recycling in thermodynamics of photovoltaics: Perovskite thin-film solar cells

scholarly article in Physical Review B, vol. 98 no. 7, August 2018

Scalable Processing of Low-Temperature TiO2 Nanoparticles for High-Efficiency Perovskite Solar Cells

artículo científico publicado en 2018

Sensitizing TADF Absorption Using Variable Length Oligo(phenylene ethynylene) Antennae

scientific article published on 26 February 2020

Shape-memory polymers as flexible resonator substrates for continuously tunable organic DFB lasers

Size-Dependent Absolute Quantum Yields for Size-Separated Colloidally-Stable Silicon Nanocrystals ⬇️

artículo científico publicado el 29 de diciembre de 2011

Soluble diazaiptycenes: materials for solution-processed organic electronics.

artículo científico publicado en 2014

Substrate-Independent Surface Energy Tuning via Siloxane Treatment for Printed Electronics

artículo científico publicado en 2018

Temperature Variation-Induced Performance Decline of Perovskite Solar Cells

artículo científico publicado en 2018

Texture of the Viola Flower for Light Harvesting in Photovoltaics

Toward Stable Perovskite Solar Cell Architectures: Robustness Against Temperature Variations of Real-World Conditions

artículo científico publicado en 2020

Triple cation mixed-halide perovskites for tunable lasers

Utilizing laser interference lithography to fabricate hierarchical optical active nanostructures inspired by the blue Morpho butterfly

scholarly article published 8 September 2014

looking inside a working SiLED.

artículo científico publicado en 2013

Lista de obras de

All-polymer organic semiconductor laser chips: Parallel fabrication and encapsulation ⬇️

Analysis of untreated cross sections of Cu(In,Ga)Se2 thin-film solar cells with varying Ga content using Kelvin probe force microscopy

Bioinspired phase-separated disordered nanostructures for thin photovoltaic absorbers

Coated and Printed Perovskites for Photovoltaic Applications

Colloidally Stable Silicon Nanocrystals with Near‐Infrared Photoluminescence for Biological Fluorescence Imaging ⬇️

Color-Selective Printed Organic Photodiodes for Filterless Multichannel Visible Light Communication

Comment on "Room-Temperature Continuous-Wave Operation of Organometal Halide Perovskite Lasers"

Continuous wave amplified spontaneous emission in phase-stable lead halide perovskites

Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode ⬇️

Correction to “Correlation of device Performance and Fermi Level Shift in the Emitting Layer of Organic Light-Emitting Diodes with Amine-Based Electron Injection Layers”

Coupled Nanoantenna Plasmon Resonance Spectra from Two-Photon Laser Excitation ⬇️

Cross sections of operating Cu(In,Ga)Se2 thin-film solar cells under defined white light illumination analyzed by Kelvin probe force microscopy

Design and Color Flexibility for Inkjet-Printed Perovskite Photovoltaics

Design of plasmonic grating structures towards optimum signal discrimination for biosensing applications ⬇️

Disordered diffraction gratings tailored by shape-memory based wrinkling and their application to photovoltaics

Drying Dynamics of Solution‐Processed Perovskite Thin‐Film Photovoltaics: In Situ Characterization, Modeling, and Process Control

Efficient All-Evaporated pin-Perovskite Solar Cells: A Promising Approach Toward Industrial Large-Scale Fabrication

Efficient waveguide mode extraction in white organic light emitting diodes using ITO-anodes with integrated MgF_2-columns ⬇️

Electron‐Beam‐Evaporated Nickel Oxide Hole Transport Layers for Perovskite‐Based Photovoltaics

Energy yield modelling of perovskite/silicon two-terminal tandem PV modules with flat and textured interfaces

Energy yield of bifacial textured perovskite/silicon tandem photovoltaic modules

Enhanced Photoluminescence in Quantum Dots–Porous Polymer Hybrid Films Fabricated by Microcellular Foaming

Fabrication of hierarchical photonic nanostructures inspired by Morpho butterflies utilizing laser interference lithography

Flexible Inkjet-Printed Triple Cation Perovskite X-ray Detectors

Flexible planar microfluidic chip employing a light emitting diode and a PIN-photodiode for portable flow cytometers ⬇️

Gold nanoantenna resonance diagnostics via transversal particle plasmon luminescence ⬇️

High Efficiency Perovskite‐Silicon Tandem Solar Cells: Effect of Surface Coating versus Bulk Incorporation of 2D Perovskite

High-Brightness Perovskite Light-Emitting Diodes Using a Printable Silver Microflake Contact

High-Performance Ag-Se-Based n-Type Printed Thermoelectric Materials for High Power Density Folded Generators

Influence of the Ga Content on the Optical and Electrical Properties of CuIn $_{{\bm 1}\hbox{--}{\bm x}}$Ga $_{\bm x}$Se$_{\bm 2}$ Thin-Film Solar Cells

Inkjet-Printed Triple Cation Perovskite Solar Cells

Inkjet‐Printed Micrometer‐Thick Perovskite Solar Cells with Large Columnar Grains

Investigations of singlet and triplet diffusion in thermally activated delayed-fluorescence emitters: Implications for hyperfluorescence

Low-Temperature Electroluminescence Excitation Mapping of Excitons and Trions in Short-Channel Monochiral Carbon Nanotube Devices

Low-cost label-free biosensors using photonic crystals embedded between crossed polarizers ⬇️

Methodology of energy yield modelling of perovskite-based multi-junction photovoltaics

Multicolor silicon light-emitting diodes (SiLEDs).

N-Fused quinoxalines and benzoquinoxalines as attractive emitters for organic light emitting diodes

Non-Fullerene-Based Printed Organic Photodiodes with High Responsivity and Megahertz Detection Speed

On the interplay of waveguide modes and leaky modes in corrugated OLEDs ⬇️

Perovskite Solar Cells with All‐Inkjet‐Printed Absorber and Charge Transport Layers

Plastic lab-on-a-chip for fluorescence excitation with integrated organic semiconductor lasers ⬇️

Pyrolysis-induced shrinking of three-dimensional structures fabricated by two-photon polymerization: experiment and theoretical model

Reevaluation of the beneficial effect of Cu(In,Ga)Se2 grain boundaries using Kelvin probe force microscopy

Rigorous wave-optical treatment of photon recycling in thermodynamics of photovoltaics: Perovskite thin-film solar cells

Scalable Processing of Low-Temperature TiO2 Nanoparticles for High-Efficiency Perovskite Solar Cells

Sensitizing TADF Absorption Using Variable Length Oligo(phenylene ethynylene) Antennae

Shape-memory polymers as flexible resonator substrates for continuously tunable organic DFB lasers

Size-Dependent Absolute Quantum Yields for Size-Separated Colloidally-Stable Silicon Nanocrystals ⬇️

Soluble diazaiptycenes: materials for solution-processed organic electronics.

Substrate-Independent Surface Energy Tuning via Siloxane Treatment for Printed Electronics

Temperature Variation-Induced Performance Decline of Perovskite Solar Cells

Texture of the Viola Flower for Light Harvesting in Photovoltaics

Toward Stable Perovskite Solar Cell Architectures: Robustness Against Temperature Variations of Real-World Conditions

Triple cation mixed-halide perovskites for tunable lasers

Utilizing laser interference lithography to fabricate hierarchical optical active nanostructures inspired by the blue Morpho butterfly

looking inside a working SiLED.