Lista de obras -

A Powdering Technique for Veneering Zirconia and Its Effect on the Flexural Strength of Ceramic Bilayers

artículo científico publicado en 2018

A new silica-infiltrated Y-TZP obtained by the sol-gel method

scientific article published on 21 March 2016

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

artículo científico publicado en 2013

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

artículo científico publicado en 2016

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

artículo científico publicado en 2013

Bonding of the Polymer Polyetheretherketone (PEEK) to Human Dentin: Effect of Surface Treatments

artículo científico publicado en 2016

CAD-FEA modeling and analysis of different full crown monolithic restorations

scientific article published on 20 June 2018

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

artículo científico publicado en 2015

Can heat-pressed feldspathic ceramic be submitted to multiple heat-pressing?

artículo científico publicado en 2018

Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?

artículo científico publicado en 2018

Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

artículo científico publicado en 2021

Do Mechanical Advantages Exist in Relining Fiber Posts with Composite Prior to its Cementation?

artículo científico publicado en 2018

Does TGF-β play a role in degenerative temporomandibular joint diseases? A systematic review

artículo científico publicado en 2016

Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

artículo científico publicado en 2014

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

artículo científico publicado en 2011

Effect of Adhesive Cementation Strategies on the Bonding of Y-TZP to Human Dentin.

artículo científico publicado en 2015

Effect of Consecutive Firings on the Optical and Mechanical Properties of Silicate and Lithium Disilicate Based Glass-Ceramics

artículo científico publicado en 2020

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

artículo científico publicado en 2015

Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel

scientific article published on 11 June 2018

Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis

scientific article published on 15 March 2019

Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic

artículo científico publicado en 2020

Effect of extrinsic pigmentation and surface treatments on biaxial flexure strength after cyclic loading of a translucent ZrO2 ceramic

scientific article published on 29 September 2019

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

scientific article published on 28 September 2020

Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics

artículo científico publicado en 2019

Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics.

artículo científico publicado en 2017

Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin

artículo científico publicado en 2018

Effect of sodium ascorbate and the time lapse before cementation after internal bleaching on bond strength between dentin and ceramic.

artículo científico publicado en 2010

Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic.

artículo científico publicado en 2014

Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin.

artículo científico publicado en 2013

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

artículo científico publicado en 2016

Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics

scientific article published on 16 March 2020

Influence of Acid Etching and Universal Adhesives on the Bond Strength to Dentin

scientific article published on 01 June 2020

Influence of Alveolar Bone Loss and Cement Layer Thickness on the Biomechanical Behavior of Endodontically Treated Maxillary Incisors: A 3-dimensional Finite Element Analysis

artículo científico publicado en 2017

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

artículo científico publicado en 2013

Influence of surface treatment on the shear bond strength of ceramics fused to cobalt-chromium.

artículo científico publicado en 2009

Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities

artículo científico publicado en 2019

Low-temperature degradation of a Y-TZP ceramic after surface treatments

artículo científico publicado en 2013

Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design

artículo científico publicado en 2015

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

artículo científico publicado en 2008

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

artículo científico publicado en 2016

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

artículo científico publicado en 2010

Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis

scientific article published on 05 August 2019

Surface Treatments of Zirconia to Enhance Bonding Durability

artículo científico publicado en 2015

The effect of air-particle abrasion and a zirconia primer application on resin cement bonding strength to zirconia

artículo científico publicado en 2019

Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up

artículo científico publicado en 2018

Y-TZP surface behavior under two different milling systems and three different accelerated aging protocols

scientific article published on 01 December 2018

Lista de obras de

A Powdering Technique for Veneering Zirconia and Its Effect on the Flexural Strength of Ceramic Bilayers

A new silica-infiltrated Y-TZP obtained by the sol-gel method

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

Bonding of the Polymer Polyetheretherketone (PEEK) to Human Dentin: Effect of Surface Treatments

CAD-FEA modeling and analysis of different full crown monolithic restorations

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

Can heat-pressed feldspathic ceramic be submitted to multiple heat-pressing?

Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?

Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

Do Mechanical Advantages Exist in Relining Fiber Posts with Composite Prior to its Cementation?

Does TGF-β play a role in degenerative temporomandibular joint diseases? A systematic review

Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

Effect of Adhesive Cementation Strategies on the Bonding of Y-TZP to Human Dentin.

Effect of Consecutive Firings on the Optical and Mechanical Properties of Silicate and Lithium Disilicate Based Glass-Ceramics

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel

Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis

Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic

Effect of extrinsic pigmentation and surface treatments on biaxial flexure strength after cyclic loading of a translucent ZrO2 ceramic

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics

Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics.

Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin

Effect of sodium ascorbate and the time lapse before cementation after internal bleaching on bond strength between dentin and ceramic.

Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic.

Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin.

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics

Influence of Acid Etching and Universal Adhesives on the Bond Strength to Dentin

Influence of Alveolar Bone Loss and Cement Layer Thickness on the Biomechanical Behavior of Endodontically Treated Maxillary Incisors: A 3-dimensional Finite Element Analysis

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

Influence of surface treatment on the shear bond strength of ceramics fused to cobalt-chromium.

Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities

Low-temperature degradation of a Y-TZP ceramic after surface treatments

Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis

Surface Treatments of Zirconia to Enhance Bonding Durability

The effect of air-particle abrasion and a zirconia primer application on resin cement bonding strength to zirconia

Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up

Y-TZP surface behavior under two different milling systems and three different accelerated aging protocols