Lista de obras -

A CAD interface for GEANT4.

artículo científico publicado en 2012

A comparison of surface doses for very small field size x-ray beams: Monte Carlo calculations and radiochromic film measurements.

artículo científico publicado en 2014

A feasibility study of multislice X-ray CT imaging of gel dosimeters using the "zero scan" method

artículo científico publicado en 2014

A hybrid radiation detector for simultaneous spatial and temporal dosimetry

artículo científico publicado en 2011

A methodological approach to reporting corrected small field relative outputs.

artículo científico publicado en 2013

A practical and theoretical definition of very small field size for radiotherapy output factor measurements.

artículo científico publicado en 2014

A virtual environment for medical radiation collaborative learning.

artículo científico publicado en 2015

An investigation of dose calculation accuracy in intensity-modulated radiotherapy of sites in the head & neck.

artículo científico publicado en 2006

Clinical use of diodes and micro-chambers to obtain accurate small field output factor measurements

artículo científico publicado en 2015

Contrast enhancement of EPID images via difference imaging: a feasibility study

scientific article published on 28 October 2010

Correcting radiation survey data to account for increased leakage during intensity modulated radiotherapy treatments

artículo científico publicado en 2013

Departmental action limits for TQA energy variations defined by means of statistical process control methods

scientific article published on 26 August 2019

Design and experimental testing of air slab caps which convert commercial electron diodes into dual purpose, correction-free diodes for small field dosimetry.

artículo científico publicado en 2014

Dose resolution in gel dosimetry: effect of uncertainty in the calibration function

artículo científico publicado en 2004

Dosimetry of cone-defined stereotactic radiosurgery fields with a commercial synthetic diamond detector.

artículo científico publicado en 2014

Effects of inaccurate small field dose measurements on calculated treatment doses

artículo científico publicado en 2016

Electron Interaction with Gel Dosimeters: Effective Atomic Numbers for Collisional, Radiative and Total Interaction Processes

artículo científico publicado en 2009

Establishing the impact of temporary tissue expanders on electron and photon beam dose distributions

artículo científico publicado en 2015

Evaluation of MegaVoltage Cone Beam CT image quality with an unmodified Elekta Precise Linac and EPID: a feasibility study.

artículo científico publicado en 2014

Examination of the properties of IMRT and VMAT beams and evaluation against pre-treatment quality assurance results.

artículo científico publicado en 2015

Field size consistency of nominally matched linacs

artículo científico publicado en 2015

Film dosimetry using a smart device camera: a feasibility study for point dose measurements

artículo científico publicado en 2017

Measurement of the three-dimensional distribution of radiation dose in grid therapy

scientific article published on 01 October 2004

Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution.

artículo científico publicado en 2010

Monitoring Daily QA 3 constancy for routine quality assurance on linear accelerators

artículo científico publicado en 2016

Monte Carlo verification of gel dosimetry measurements for stereotactic radiotherapy.

artículo científico publicado en 2012

New name: Physical and Engineering Sciences in Medicine

artículo científico publicado en 2019

Photon optimizer (PO) vs progressive resolution optimizer (PRO): a conformality- and complexity-based comparison for intensity-modulated arc therapy plans.

artículo científico publicado en 2017

Predatory publishing, hijacking of legitimate journals and impersonation of researchers via special issue announcements: a warning for editors and authors about a new scam

scientific article published on 16 December 2019

Radiotherapy Monte Carlo simulation using cloud computing technology

artículo científico publicado en 2012

Retrospective evaluation of dosimetric quality for prostate carcinomas treated with 3D conformal, intensity modulated and volumetric modulated arc radiotherapy

artículo científico publicado en 2013

Systematic variations in polymer gel dosimeter calibration due to container influence and deviations from water equivalence.

artículo científico publicado en 2007

Technical Note: Preliminary investigations into the use of a functionalised polymer to reduce diffusion in Fricke gel dosimeters

artículo científico publicado en 2015

Technical Note: Relationships between gamma criteria and action levels: Results of a multicenter audit of gamma agreement index results

artículo científico publicado en 2016

The appearance and effects of metallic implants in CT images ⬇️

artículo científico publicado el 23 de mayo de 2013

The effect of very small air gaps on small field dosimetry

artículo científico publicado en 2012

The use of gel dosimetry for verification of electron and photon treatment plans in carcinoma of the scalp.

artículo científico publicado en 2004

Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

artículo científico publicado en 2014

Ultrasound attenuation computed tomography assessment of PAGAT gel dose.

artículo científico publicado en 2014

Use of electronic portal imaging devices for electron treatment verification

artículo científico publicado en 2015

Validation and automation of the DYNJAWS component module of the BEAMnrc Monte Carlo code.

artículo científico publicado en 2011

Web of Science, Scopus, and Google Scholar citation rates: a case study of medical physics and biomedical engineering: what gets cited and what doesn't?

artículo científico publicado en 2016

Why publish?

scientific article published on 01 December 2011

Lista de obras de

A CAD interface for GEANT4.

A comparison of surface doses for very small field size x-ray beams: Monte Carlo calculations and radiochromic film measurements.

A feasibility study of multislice X-ray CT imaging of gel dosimeters using the "zero scan" method

A hybrid radiation detector for simultaneous spatial and temporal dosimetry

A methodological approach to reporting corrected small field relative outputs.

A practical and theoretical definition of very small field size for radiotherapy output factor measurements.

A virtual environment for medical radiation collaborative learning.

An investigation of dose calculation accuracy in intensity-modulated radiotherapy of sites in the head & neck.

Clinical use of diodes and micro-chambers to obtain accurate small field output factor measurements

Contrast enhancement of EPID images via difference imaging: a feasibility study

Correcting radiation survey data to account for increased leakage during intensity modulated radiotherapy treatments

Departmental action limits for TQA energy variations defined by means of statistical process control methods

Design and experimental testing of air slab caps which convert commercial electron diodes into dual purpose, correction-free diodes for small field dosimetry.

Dose resolution in gel dosimetry: effect of uncertainty in the calibration function

Dosimetry of cone-defined stereotactic radiosurgery fields with a commercial synthetic diamond detector.

Effects of inaccurate small field dose measurements on calculated treatment doses

Electron Interaction with Gel Dosimeters: Effective Atomic Numbers for Collisional, Radiative and Total Interaction Processes

Establishing the impact of temporary tissue expanders on electron and photon beam dose distributions

Evaluation of MegaVoltage Cone Beam CT image quality with an unmodified Elekta Precise Linac and EPID: a feasibility study.

Examination of the properties of IMRT and VMAT beams and evaluation against pre-treatment quality assurance results.

Field size consistency of nominally matched linacs

Film dosimetry using a smart device camera: a feasibility study for point dose measurements

Measurement of the three-dimensional distribution of radiation dose in grid therapy

Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution.

Monitoring Daily QA 3 constancy for routine quality assurance on linear accelerators

Monte Carlo verification of gel dosimetry measurements for stereotactic radiotherapy.

New name: Physical and Engineering Sciences in Medicine

Photon optimizer (PO) vs progressive resolution optimizer (PRO): a conformality- and complexity-based comparison for intensity-modulated arc therapy plans.

Predatory publishing, hijacking of legitimate journals and impersonation of researchers via special issue announcements: a warning for editors and authors about a new scam

Radiotherapy Monte Carlo simulation using cloud computing technology

Retrospective evaluation of dosimetric quality for prostate carcinomas treated with 3D conformal, intensity modulated and volumetric modulated arc radiotherapy

Systematic variations in polymer gel dosimeter calibration due to container influence and deviations from water equivalence.

Technical Note: Preliminary investigations into the use of a functionalised polymer to reduce diffusion in Fricke gel dosimeters

Technical Note: Relationships between gamma criteria and action levels: Results of a multicenter audit of gamma agreement index results

The appearance and effects of metallic implants in CT images ⬇️

The effect of very small air gaps on small field dosimetry

The use of gel dosimetry for verification of electron and photon treatment plans in carcinoma of the scalp.

Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

Ultrasound attenuation computed tomography assessment of PAGAT gel dose.

Use of electronic portal imaging devices for electron treatment verification

Validation and automation of the DYNJAWS component module of the BEAMnrc Monte Carlo code.

Web of Science, Scopus, and Google Scholar citation rates: a case study of medical physics and biomedical engineering: what gets cited and what doesn't?

Why publish?