Lista de obras -

Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast

artículo científico publicado en 2007

Capillarity in pressure infiltration: improvements in characterization of high-temperature systems

artículo científico publicado en 2012

Corrigendum to: on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites

artículo científico publicado en 2003

Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method

artículo científico publicado en 2001

Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite

artículo científico publicado en 2005

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

artículo científico publicado en 2005

Damage evolution of Nextel 610TM alumina fibre reinforced aluminium

artículo científico publicado en 2004

Development of a new family of phosphorous-free Pt-based bulk metallic glasses

artículo científico publicado en 2017

Diamond-Based Metal Matrix Composites for Thermal Management Made by Liquid Metal Infiltration — Potential and Limits

artículo científico publicado en 2008

Direct measurement of drainage curves in infiltration of SiC particle preforms

artículo científico publicado en 2008

Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity

artículo científico publicado en 2008

Ductility of Saffil™ short fibre reinforced metals

artículo científico publicado en 2005

Effect of Ca addition on interface formation in Al(Ca)/Al 2 O 3 composites prepared by gas pressure assisted infiltration

artículo científico publicado en 2016

Effect of diamond surface orientation on the thermal boundary conductance between diamond and aluminum

artículo científico publicado en 2013

Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites

artículo científico publicado en 2016

Effective hydrogen diffusion coefficient for solidifying aluminium alloys

artículo científico publicado en 2011

Effects of partial crystallization in Pt-Si-B-based bulk metallic glasses on glass transition and crystallization of the remaining amorphous matrix

artículo científico publicado en 2017

Equilibrium solid solubility of silicon in silver

artículo científico publicado en 2002

Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime

artículo científico publicado en 2017

Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain

artículo científico publicado en 2000

High-temperature wettability of aluminum nitride during liquid metal infiltration

artículo científico publicado en 2008

In situ flow stress of pure aluminium constrained by tightly packed alumina fibres

artículo científico publicado en 2009

Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves

artículo científico publicado en 2014

Influence of a Nanometric Al 2 O 3 Interlayer on the Thermal Conductance of an Al/(Si, Diamond) Interface

artículo científico publicado en 2014

Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol. pct alumina particles

artículo científico publicado en 2001

Influence of diamond surface termination on thermal boundary conductance between Al and diamond

artículo científico publicado en 2013

Influence of processing route on electrical and thermal conductivity of Al/SiC composites with bimodal particle distribution

artículo científico publicado en 2009

Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites

artículo científico publicado en 2010

Influence of sample processing parameters on thermal boundary conductance value in an Al/AlN system

artículo científico publicado en 2011

Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

artículo científico publicado en 2018

Influence of the wetting angle on capillary forces in pressure infiltration

artículo científico publicado en 2015

Interface formation in infiltrated Al(Si)/diamond composites

artículo científico publicado en 2006

Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission

artículo científico publicado en 2008

Measuring and tailoring capillary forces during liquid metal infiltration

artículo científico publicado en 2005

Mechanical behaviour of diamond reinforced metals

artículo científico publicado en 2009

Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications

scientific article published on 26 April 2020

Metallurgical considerations for accelerated testing of soft solder joints

artículo científico publicado en 1997

Nextel™ 610 alumina fibre reinforced aluminium: influence of matrix and process on flow stress

artículo científico publicado en 2001

Non-conducting inclusions in a conducting matrix: Influence of inclusion size on electrical conductivity

artículo científico publicado en 2005

On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions

artículo científico publicado en 2003

On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites

artículo científico publicado en 2007

On the influence of the shape of randomly oriented, non-conducting inclusions in a conducting matrix on the effective electrical conductivity

artículo científico publicado en 2003

On the use of Considere’s criterion in tensile testing of materials which accumulate internal damage

artículo científico publicado en 1999

Open cellular magnesium alloys for biodegradable orthopaedic implants

artículo científico publicado en 2013

Particle reinforced metals of high ceramic content

artículo científico publicado en 2004

Partitioning of chromium and molybdenum in super duplex stainless steels with respect to nitrogen and nickel content

artículo científico publicado en 1998

Percolation and Universal Scaling in Composite Infiltration Processing

artículo científico publicado en 2014

Plasticity in Chevron-notch fracture toughness testing

artículo científico publicado en 2000

Processing of Ag–Cu alloy foam by the replication process

artículo científico publicado en 2009

Qualitative link between work of adhesion and thermal conductance of metal/diamond interfaces

artículo científico publicado en 2014

Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminium

artículo científico publicado en 2001

Reactivity and thermal behaviour of Cu–Si/SiC composites: Effects of SiC oxidation

artículo científico publicado en 2006

Rigidity of diamond reinforced metals featuring high particle contents

artículo científico publicado en 2009

Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivity

artículo científico publicado en 2006

Solid solubility of germanium in silver

artículo científico publicado en 2012

Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments

artículo científico publicado en 2019

Surface Modification of Diamonds in Diamond/Al-Matrix Composite

artículo científico publicado en 2008

Swift and inverse Swift effect in alumina fiber reinforced aluminum wires

artículo científico publicado en 2000

Temperature dependence of the thermal boundary conductance in Ag–3Si/diamond composites

artículo científico publicado en 2015

Tensile behaviour and ductility of 10 vol.-% Saffil short fibre reinforced aluminium

artículo científico publicado en 2004

Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking

artículo científico publicado en 2008

The electrical conductivity of microcellular metals

artículo científico publicado en 2006

The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test

artículo científico publicado en 2003

Thermal Boundary Conductance: A Materials Science Perspective

artículo científico publicado en 2016

Thermal boundary conductance between refractory metal carbides and diamond

artículo científico publicado en 2014

Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites

artículo científico publicado en 2011

Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution

artículo científico publicado en 2008

Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles

artículo científico publicado en 2008

Transmitted light microscopy of a fibre reinforced metal

artículo científico publicado en 2003

Wetting in infiltration of alumina particle preforms with molten copper

artículo científico publicado en 2005

Lista de obras de

Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast

Capillarity in pressure infiltration: improvements in characterization of high-temperature systems

Corrigendum to: on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites

Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method

Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

Damage evolution of Nextel 610TM alumina fibre reinforced aluminium

Development of a new family of phosphorous-free Pt-based bulk metallic glasses

Diamond-Based Metal Matrix Composites for Thermal Management Made by Liquid Metal Infiltration — Potential and Limits

Direct measurement of drainage curves in infiltration of SiC particle preforms

Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity

Ductility of Saffil™ short fibre reinforced metals

Effect of Ca addition on interface formation in Al(Ca)/Al 2 O 3 composites prepared by gas pressure assisted infiltration

Effect of diamond surface orientation on the thermal boundary conductance between diamond and aluminum

Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites

Effective hydrogen diffusion coefficient for solidifying aluminium alloys

Effects of partial crystallization in Pt-Si-B-based bulk metallic glasses on glass transition and crystallization of the remaining amorphous matrix

Equilibrium solid solubility of silicon in silver

Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime

Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain

High-temperature wettability of aluminum nitride during liquid metal infiltration

In situ flow stress of pure aluminium constrained by tightly packed alumina fibres

Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves

Influence of a Nanometric Al 2 O 3 Interlayer on the Thermal Conductance of an Al/(Si, Diamond) Interface

Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol. pct alumina particles

Influence of diamond surface termination on thermal boundary conductance between Al and diamond

Influence of processing route on electrical and thermal conductivity of Al/SiC composites with bimodal particle distribution

Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites

Influence of sample processing parameters on thermal boundary conductance value in an Al/AlN system

Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

Influence of the wetting angle on capillary forces in pressure infiltration

Interface formation in infiltrated Al(Si)/diamond composites

Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission

Measuring and tailoring capillary forces during liquid metal infiltration

Mechanical behaviour of diamond reinforced metals

Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications

Metallurgical considerations for accelerated testing of soft solder joints

Nextel™ 610 alumina fibre reinforced aluminium: influence of matrix and process on flow stress

Non-conducting inclusions in a conducting matrix: Influence of inclusion size on electrical conductivity

On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions

On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond composites

On the influence of the shape of randomly oriented, non-conducting inclusions in a conducting matrix on the effective electrical conductivity

On the use of Considere’s criterion in tensile testing of materials which accumulate internal damage

Open cellular magnesium alloys for biodegradable orthopaedic implants

Particle reinforced metals of high ceramic content

Partitioning of chromium and molybdenum in super duplex stainless steels with respect to nitrogen and nickel content

Percolation and Universal Scaling in Composite Infiltration Processing

Plasticity in Chevron-notch fracture toughness testing

Processing of Ag–Cu alloy foam by the replication process

Qualitative link between work of adhesion and thermal conductance of metal/diamond interfaces

Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminium

Reactivity and thermal behaviour of Cu–Si/SiC composites: Effects of SiC oxidation

Rigidity of diamond reinforced metals featuring high particle contents

Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivity

Solid solubility of germanium in silver

Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments

Surface Modification of Diamonds in Diamond/Al-Matrix Composite

Swift and inverse Swift effect in alumina fiber reinforced aluminum wires

Temperature dependence of the thermal boundary conductance in Ag–3Si/diamond composites

Tensile behaviour and ductility of 10 vol.-% Saffil short fibre reinforced aluminium

Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking

The electrical conductivity of microcellular metals

The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test

Thermal Boundary Conductance: A Materials Science Perspective

Thermal boundary conductance between refractory metal carbides and diamond

Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites

Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution

Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles

Transmitted light microscopy of a fibre reinforced metal

Wetting in infiltration of alumina particle preforms with molten copper