Lista de obras -

1H and 31P NMR characterisation of a double breast coil for spectroscopic measurements and imaging.

artículo científico publicado en 1999

A fuzzy evaluation program for the PTCA catheter

artículo científico publicado el 1 de enero de 1997

A new electromyography measuring and training instrument with automatic data storage for amputees

artículo científico publicado en 1988

A new method of reliable detection of muscle activity--the median spectral distance

artículo científico publicado en 1990

A novel method for patient-oriented assignment of wheelchair cushions based on standardized laboratory testing procedures

artículo científico publicado en 2005

An electronic storage system with histographical representation for axial load measurement in modular prostheses (author's transl)

artículo científico publicado el 1 de diciembre de 1978

Analysis of construction related wear characteristics of different hip joint endoprostheses

artículo científico publicado en 1990

Assessment of catheter drive and measurement collection in a coronary vessel model for the PTCA catheter

artículo científico publicado el 1 de enero de 1997

BIOGRAPH--a program for microcomputer-assisted detection, presentation and processing of bioelectric signals

artículo científico publicado en 1990

Biomechanical stress studies with a new Y-nail

artículo científico publicado en 1997

Biomedical engineering in orthopaedics (authors transl)

artículo científico publicado el 1 de octubre de 1973

Clinical research on the problem of pressure distribution in single- and multichannel infusion apparatus

artículo científico publicado en 1985

Comparative study of one-way transducers for invasive blood pressure measurement

artículo científico publicado en 1989

Comparative study of the alternating bending strength of tubular components for modular leg prosthesis (author's transl)

artículo científico publicado el 1 de diciembre de 1979

Comparison of internal fixation methods for the symphysis in multi-directional dynamic gait simulation

artículo científico publicado en 1998

Current status of the development of a coronary vessel model for comparative studies of PTCA catheters

artículo científico publicado el 1 de enero de 1997

Development of a bipolar clamp forceps for minimal invasive surgery

artículo científico publicado el 1 de enero de 1997

Development of a measuring set-up for determination of light distribution of scattered light applicators for interstitial laser treatment

artículo científico publicado en 1996

Development of a suturing device for minimal invasive surgery

artículo científico publicado el 1 de enero de 1997

Drive principles of a triaxial physiological hip joint simulator for wear testing of hip endoprostheses

artículo científico publicado el 1 de abril de 2003

Dynamische Stabilität von Rollstühlen. Dynamic Stability of Wheelchairs

article

Effect of bone structure on the strength of bonding between the spongioid bone and polymethylmethacrylate

artículo científico publicado en 1985

Effect of hardness and surface quality of metal cones on fracture load of ceramic ball heads of hip endoprostheses

artículo científico publicado en 1994

Effects of para- and diamagnetic materials in a 1.5 Tesla high field magnetic resonance tomography system

artículo científico publicado en 1998

Evaluation of measurement systems for determining therapeutic effectiveness of anti-decubitus ulcer devices

artículo científico publicado en 2002

Evaluation of possible measuring errors from overlaying pressure components in invasive blood pressure recording with external transducers

artículo científico publicado el 1 de septiembre de 1997

Experimental analysis of the loads acting on below-knee modular prostheses on outdoor walkway surfaces (author's transl)

artículo científico publicado el 1 de enero de 1977

Experimental determination of the influence of roadway surfaces and obstacles on wheelchair stress

artículo científico publicado en 1983

Finite element method simulation of the effect of an administration of laser energy in the tooth root canal

artículo científico publicado el 1 de enero de 1997

Finite element model study of epiphyseal attachment of knee endoprostheses

artículo científico publicado en 1990

How many bioengineers are needed? Report of a commission of the German Society for Biomedical Engineering concerning the professional field and the needs for technically trained personnel (author's transl)

artículo científico publicado el 1 de marzo de 1977

Influence of different trocar tips on abdominal wall penetration during laparoscopy

artículo científico publicado en 1998

Integrated gait analysis for future routine clinical use

artículo científico publicado en 1993

Integrated gait analysis: a complex expert system approach to detailed data evaluation

artículo científico publicado en 1995

Kinetic and kinematic gait analysis before and after total knee endoprosthesis implantation

artículo científico publicado en 2000

Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. I. Tensile strength ⬇️

artículo científico publicado el 1 de enero de 1972

Mechanical properties of bonding between cancellous bone and polymethylmethacrylate. II. Shear strength (author's transl) ⬇️

artículo científico publicado el 1 de enero de 1973

Mechanical properties of human and swine pericardium

artículo científico publicado en 1998

Methods for studying wear and parameters influencing wear characteristics of material combinations for hip endoprostheses

artículo científico publicado el 1 de enero de 1997

Modeling vestibulo-ocular reflexes in everyday activities

artículo científico publicado en 1996

Multifunctional testing of PTCA balloon catheters

artículo científico publicado en 2000

Para-magnetic measurement of oxygen concentration

artículo científico publicado en 1990

Possibilities for optimizing prosthetic management of leg amputees using quantitative movement analysis

artículo científico publicado en 1993

Possibilities of myoelectric control of artificial limb prostheses

artículo científico publicado el 1 de julio de 1992

Removal of bone cement with laser

artículo científico publicado en 1991

Result of a user inquiry for the improvement of hand propelled wheelchairs (author's transl)

artículo científico publicado el 1 de abril de 1975

Reuse of instruments for minimal invasive surgery--status and prospects

artículo científico publicado en 2000

Single plate signal processor unit with 56001 for real time biosignal processing--stand-alone and reprogrammable

artículo científico publicado en 1990

Supply of disability aids for handicapped patients

artículo científico publicado en 1998

The effects of the use of piezoelectric motors in a 1.5-Tesla high-field magnetic resonance imaging system (MRI).

artículo científico publicado en 2000

Ultrasonic surfactant nebulization with different exciting frequencies

artículo científico publicado en 2000

[A new procedure for simulation of wheelchair operation]

scientific article published on 01 January 1990

[A new servohydraulic testing stand for performing endurance tests on artificial feet]

scientific article published on 01 December 1982

[A servo hydraulic test device for life time tests on artificial limb components (author's transl)]

artículo científico publicado en 1980

[Analysis of load studies of the spine]

scientific article published on 01 January 1997

[BEATE--a new function test instrument for safety technical assessment of respirators]

artículo científico publicado en 1988

[Biomechanics of the pubic symphysis. Which forces lead to mobility of the symphysis in physiological conditions?]

scientific article published on 01 June 1996

[Comparative study of Shaver systems for arthroscopy]

scientific article published on 01 January 1990

[Comparative study of unidirectional transducers for invasive blood pressure monitoring]

artículo científico publicado en 1989

[Contribution to safety testing of anesthetic ventilators]

artículo científico publicado en 1987

[Current status of opto-electronic movement analysis--systems and their use within the scope of gait image studies]

artículo científico publicado en 1989

[Cutting speeds and success of biopsy with different punch biopsy instruments]

scientific article published on 01 June 2001

[De-magnetization procedures within the scope of biomagnetic diagnosis]

artículo científico publicado en 1997

[Effect of geometric pattern and fracture type on the stability of monolateral external fixation]

artículo científico publicado en 1988

[Field study of loading patterns on elbow crutches with a view to determining load test values]

artículo científico publicado en 1984

[In vitro studies of the specifications for methodological and technical equipment requirements of endoscopic infrared diaphanoscopy]

artículo científico publicado en 1995

[Localization of nerve fascicles with stimulation electrodes used for plexus anesthesia]

artículo científico publicado en 1989

[Long-term stability of glass ionomer cement--method and results]

artículo científico publicado en 1996

[Materials for hip endoprostheses--alternatives to standard materials]

scientific article published on 01 December 1995

[Myoelectrically controlled passive motion device for early functional rehabilitation]

artículo científico publicado en 1993

[Possibilities for recognizing and suppressing artifacts in EMG signals]

artículo científico publicado en 1993

[Risk analysis of medical products. Implementation of risk analysis exemplified by the spongiosa cannulated screw]

artículo científico publicado en 1997

[Software components for data processing of measurement values in experimental studies with PTCA catheters].

artículo científico publicado en 1998

[Studies of stresses on modular prostheses of the lower extremities--measuring procedures and results of the last 15 years]

scientific article published on 01 December 1986

[Technical study of the question of the effectiveness of heat and moisture exchangers]

scientific article published on 01 November 1987

[Use of silicone rubber in prosthetic sockets--report of experiences]

artículo científico publicado en 1984

Lista de obras de

1H and 31P NMR characterisation of a double breast coil for spectroscopic measurements and imaging.

A fuzzy evaluation program for the PTCA catheter

A new electromyography measuring and training instrument with automatic data storage for amputees

A new method of reliable detection of muscle activity--the median spectral distance

A novel method for patient-oriented assignment of wheelchair cushions based on standardized laboratory testing procedures

An electronic storage system with histographical representation for axial load measurement in modular prostheses (author's transl)

Analysis of construction related wear characteristics of different hip joint endoprostheses

Assessment of catheter drive and measurement collection in a coronary vessel model for the PTCA catheter

BIOGRAPH--a program for microcomputer-assisted detection, presentation and processing of bioelectric signals

Biomechanical stress studies with a new Y-nail

Biomedical engineering in orthopaedics (authors transl)

Clinical research on the problem of pressure distribution in single- and multichannel infusion apparatus

Comparative study of one-way transducers for invasive blood pressure measurement

Comparative study of the alternating bending strength of tubular components for modular leg prosthesis (author's transl)

Comparison of internal fixation methods for the symphysis in multi-directional dynamic gait simulation

Current status of the development of a coronary vessel model for comparative studies of PTCA catheters

Development of a bipolar clamp forceps for minimal invasive surgery

Development of a measuring set-up for determination of light distribution of scattered light applicators for interstitial laser treatment

Development of a suturing device for minimal invasive surgery

Drive principles of a triaxial physiological hip joint simulator for wear testing of hip endoprostheses

Dynamische Stabilität von Rollstühlen. Dynamic Stability of Wheelchairs

Effect of bone structure on the strength of bonding between the spongioid bone and polymethylmethacrylate

Effect of hardness and surface quality of metal cones on fracture load of ceramic ball heads of hip endoprostheses

Effects of para- and diamagnetic materials in a 1.5 Tesla high field magnetic resonance tomography system

Evaluation of measurement systems for determining therapeutic effectiveness of anti-decubitus ulcer devices

Evaluation of possible measuring errors from overlaying pressure components in invasive blood pressure recording with external transducers

Experimental analysis of the loads acting on below-knee modular prostheses on outdoor walkway surfaces (author's transl)

Experimental determination of the influence of roadway surfaces and obstacles on wheelchair stress

Finite element method simulation of the effect of an administration of laser energy in the tooth root canal

Finite element model study of epiphyseal attachment of knee endoprostheses

How many bioengineers are needed? Report of a commission of the German Society for Biomedical Engineering concerning the professional field and the needs for technically trained personnel (author's transl)

Influence of different trocar tips on abdominal wall penetration during laparoscopy

Integrated gait analysis for future routine clinical use

Integrated gait analysis: a complex expert system approach to detailed data evaluation

Kinetic and kinematic gait analysis before and after total knee endoprosthesis implantation

Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. I. Tensile strength ⬇️

Mechanical properties of bonding between cancellous bone and polymethylmethacrylate. II. Shear strength (author's transl) ⬇️

Mechanical properties of human and swine pericardium

Methods for studying wear and parameters influencing wear characteristics of material combinations for hip endoprostheses

Modeling vestibulo-ocular reflexes in everyday activities

Multifunctional testing of PTCA balloon catheters

Para-magnetic measurement of oxygen concentration

Possibilities for optimizing prosthetic management of leg amputees using quantitative movement analysis

Possibilities of myoelectric control of artificial limb prostheses

Removal of bone cement with laser

Result of a user inquiry for the improvement of hand propelled wheelchairs (author's transl)

Reuse of instruments for minimal invasive surgery--status and prospects

Single plate signal processor unit with 56001 for real time biosignal processing--stand-alone and reprogrammable

Supply of disability aids for handicapped patients

The effects of the use of piezoelectric motors in a 1.5-Tesla high-field magnetic resonance imaging system (MRI).

Ultrasonic surfactant nebulization with different exciting frequencies

[A new procedure for simulation of wheelchair operation]

[A new servohydraulic testing stand for performing endurance tests on artificial feet]

[A servo hydraulic test device for life time tests on artificial limb components (author's transl)]

[Analysis of load studies of the spine]

[BEATE--a new function test instrument for safety technical assessment of respirators]

[Biomechanics of the pubic symphysis. Which forces lead to mobility of the symphysis in physiological conditions?]

[Comparative study of Shaver systems for arthroscopy]

[Comparative study of unidirectional transducers for invasive blood pressure monitoring]

[Contribution to safety testing of anesthetic ventilators]

[Current status of opto-electronic movement analysis--systems and their use within the scope of gait image studies]

[Cutting speeds and success of biopsy with different punch biopsy instruments]

[De-magnetization procedures within the scope of biomagnetic diagnosis]

[Effect of geometric pattern and fracture type on the stability of monolateral external fixation]

[Field study of loading patterns on elbow crutches with a view to determining load test values]

[In vitro studies of the specifications for methodological and technical equipment requirements of endoscopic infrared diaphanoscopy]

[Localization of nerve fascicles with stimulation electrodes used for plexus anesthesia]

[Long-term stability of glass ionomer cement--method and results]

[Materials for hip endoprostheses--alternatives to standard materials]

[Myoelectrically controlled passive motion device for early functional rehabilitation]

[Possibilities for recognizing and suppressing artifacts in EMG signals]

[Risk analysis of medical products. Implementation of risk analysis exemplified by the spongiosa cannulated screw]

[Software components for data processing of measurement values in experimental studies with PTCA catheters].

[Studies of stresses on modular prostheses of the lower extremities--measuring procedures and results of the last 15 years]

[Technical study of the question of the effectiveness of heat and moisture exchangers]

[Use of silicone rubber in prosthetic sockets--report of experiences]