Lista de obras -

A New Extrudable Form of Hypromellose: AFFINISOL™ HPMC HME.

artículo científico publicado en 2015

A modified USP induction port to characterize nasal spray plume geometry and predict turbinate deposition under flow

artículo científico publicado en 2018

A novel particle engineering technology to enhance dissolution of poorly water soluble drugs: spray-freezing into liquid.

artículo científico publicado en 2002

A novel particle engineering technology: spray-freezing into liquid.

artículo científico publicado en 2002

Aerosolized nanostructured itraconazole as prophylaxis against invasive pulmonary aspergillosis.

artículo científico publicado en 2007

Amorphous compositions using concentration enhancing polymers for improved bioavailability of itraconazole.

artículo científico publicado en 2008

Amorphous cyclosporin nanodispersions for enhanced pulmonary deposition and dissolution.

artículo científico publicado en 2008

Amorphous solid dispersions and nano-crystal technologies for poorly water-soluble drug delivery ⬇️

artículo científico publicado el 7 de junio de 2013

Application of co-grinding to formulate a model pMDI suspension

artículo científico publicado en 1999

Applications of KinetiSol dispersing for the production of plasticizer free amorphous solid dispersions.

artículo científico publicado en 2010

Atmospheric freeze drying for the reduction of powder electrostatics of amorphous, low density, high surface area pharmaceutical powders ⬇️

artículo científico publicado el 22 de mayo de 2012

Bioavailability Improvement of Carbamazepine via Oral Administration of Modified-Release Amorphous Solid Dispersions in Rats

artículo científico publicado en 2020

Bioavailability enhancement of a BCS IV compound via an amorphous combination product containing ritonavir.

artículo científico publicado en 2015

CNS disorders--current treatment options and the prospects for advanced therapies

artículo científico publicado en 2008

Can drug release rate from implants be tailored using poly(urethane) mixtures?

scientific article published on 06 December 2018

Caveolin-1-derived peptide limits development of pulmonary fibrosis

artículo científico publicado en 2019

Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review

artículo científico

Characterization and pharmacokinetic analysis of aerosolized aqueous voriconazole solution.

artículo científico publicado en 2009

Characterization and pharmacokinetic analysis of crystalline versus amorphous rapamycin dry powder via pulmonary administration in rats.

artículo científico publicado en 2014

Characterization and pharmacokinetic analysis of tacrolimus dispersion for nebulization in a lung transplanted rodent model.

artículo científico publicado en 2009

Characterization of an inclusion complex of cholesterol and hydroxypropyl-beta-cyclodextrin

artículo científico publicado en 1998

Compaction properties of microcrystalline cellulose and sodium sulfathiazole in combination with talc or magnesium stearate

artículo científico publicado en 1989

Comparison of bioavailability of amorphous versus crystalline itraconazole nanoparticles via pulmonary administration in rats.

artículo científico publicado en 2010

Cryogenic liquids, nanoparticles, and microencapsulation.

artículo científico publicado en 2006

Current therapies and technological advances in aqueous aerosol drug delivery

artículo científico publicado en 2008

Delivery Technologies for Orally Inhaled Products: an Update

artículo científico publicado en 2019

Design of potent amorphous drug nanoparticles for rapid generation of highly supersaturated media.

artículo científico publicado en 2007

Development of Remdesivir as a Dry Powder for Inhalation by Thin Film Freezing

scientific article published on 22 October 2020

Development of an Excipient-Free Peptide Dry Powder Inhalation for the Treatment of Pulmonary Fibrosis

scientific article published on 08 January 2020

Dissolution enhancement of itraconazole by hot-melt extrusion alone and the combination of hot-melt extrusion and rapid freezing--effect of formulation and processing variables

artículo científico publicado en 2013

Drug delivery strategies for improved azole antifungal action

artículo científico publicado en 2008

Drug nanoparticles by antisolvent precipitation: mixing energy versus surfactant stabilization.

artículo científico publicado en 2006

Dry powder insufflation of crystalline and amorphous voriconazole formulations produced by thin film freezing to mice

artículo científico publicado en 2012

Effect of process variables on morphology and aerodynamic properties of voriconazole formulations produced by thin film freezing

artículo científico publicado en 2012

Enabling thermal processing of ritonavir-polyvinyl alcohol amorphous solid dispersions by KinetiSol® Dispersing.

artículo científico publicado en 2016

Encapsulation of protein nanoparticles into uniform-sized microspheres formed in a spinning oil film.

artículo científico publicado en 2005

Enhanced Aerosolization of High Potency Nanoaggregates of Voriconazole by Dry Powder Inhalation

artículo científico publicado en 2019

Enhanced aqueous dissolution of a poorly water soluble drug by novel particle engineering technology: spray-freezing into liquid with atmospheric freeze-drying.

artículo científico publicado en 2003

Enhanced drug dissolution using evaporative precipitation into aqueous solution.

artículo científico publicado en 2002

Enhanced in vivo absorption of itraconazole via stabilization of supersaturation following acidic-to-neutral pH transition

artículo científico publicado en 2008

Enhancing bioavailability through thermal processing ⬇️

artículo científico publicado el 22 de abril de 2013

Evaluation of the USP dissolution test method A for enteric-coated articles by planar laser-induced fluorescence.

artículo científico publicado en 2006

Films loaded with insulin-coated nanoparticles (ICNP) as potential platforms for peptide buccal delivery

artículo científico publicado en 2014

Flocculated amorphous itraconazole nanoparticles for enhanced in vitro supersaturation and in vivo bioavailability

artículo científico publicado en 2011

Flocculation of polymer stabilized nanocrystal suspensions to produce redispersible powders

artículo científico publicado en 2009

Formation of stable submicron protein particles by thin film freezing.

artículo científico publicado en 2008

Formulation Composition and Process Affect Counterion for CSP7 Peptide

artículo científico publicado en 2019

Formulation and delivery of improved amorphous fenofibrate solid dispersions prepared by thin film freezing

artículo científico publicado en 2012

Formulation of a novel fixed dose combination of salmeterol xinafoate and mometasone furoate for inhaled drug delivery.

artículo científico publicado en 2015

Formulation of a protein with propellant HFA 134a for aerosol delivery

scientific article published on 01 January 1999

Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol dispersing.

artículo científico publicado en 2009

Has nanotechnology led to improved therapeutic outcomes?

artículo científico

High bioavailability from nebulized itraconazole nanoparticle dispersions with biocompatible stabilizers.

artículo científico publicado en 2008

Highly supersaturated solutions of amorphous drugs approaching predictions from configurational thermodynamic properties.

artículo científico publicado en 2008

Homogeneity of amorphous solid dispersions - an example with KinetiSol®

artículo científico publicado en 2019

Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole

artículo científico publicado en 2016

Hot-melt extrusion--basic principles and pharmaceutical applications

artículo científico

How Do You Use AAPS PharmSciTech?

artículo científico publicado en 2015

Improvement of dissolution rates of poorly water soluble APIs using novel spray freezing into liquid technology.

artículo científico publicado en 2002

In vitro and in vivo performance of dry powder inhalation formulations: comparison of particles prepared by thin film freezing and micronization

artículo científico publicado en 2014

Influence of formulation and processing variables on properties of itraconazole nanoparticles made by advanced evaporative precipitation into aqueous solution.

artículo científico publicado en 2012

Influence of formulation technique for hydroxypropyl-beta-cyclodextrin on the stability of aspirin in HFA 134a

artículo científico publicado en 1999

Influence of hydroxypropyl methylcellulose polymer on in vitro and in vivo performance of controlled release tablets containing alprazolam.

artículo científico publicado en 2003

Influence of metering chamber volume and water level on the emitted dose of a suspension-based pMDI containing propellant 134a

artículo científico publicado en 1997

Influence of micronization method on the performance of a suspension triamcinolone acetonide pressurized metered-dose inhaler formulation

artículo científico publicado en 1999

Influence of particle size on regional lung deposition--what evidence is there?

artículo científico publicado en 2011

Influence of process parameters on the preparation of pharmaceutical films by electrostatic powder deposition.

artículo científico publicado en 2016

Influence of processing and curing conditions on beads coated with an aqueous dispersion of cellulose acetate phthalate

artículo científico publicado en 2000

Inhaled nanoparticles--a current review.

artículo científico publicado en 2008

Inhaled voriconazole for prevention of invasive pulmonary aspergillosis.

artículo científico publicado en 2009

Long-term stability of heat-humidity cured cellulose acetate phthalate coated beads.

artículo científico publicado en 2002

Modified release itraconazole amorphous solid dispersion to treat Aspergillus fumigatus: importance of the animal model selection.

artículo científico publicado en 2016

Moisture uptake and its influence on pressurized metered-dose inhalers

artículo científico publicado en 2000

Morphology of protein particles produced by spray freezing of concentrated solutions.

artículo científico publicado en 2006

Mucoadhesive amorphous solid dispersions for sustained release of poorly water soluble drugs

scientific article published on 11 January 2017

Murine airway histology and intracellular uptake of inhaled amorphous itraconazole

scientific article published on 14 February 2007

Nebulization of mycophenolate mofetil inhalation suspension in rats: comparison with oral and pulmonary administration of Cellcept®.

artículo científico publicado en 2012

Novel ultra-rapid freezing particle engineering process for enhancement of dissolution rates of poorly water-soluble drugs.

artículo científico publicado en 2006

Personalized Medicine in Nasal Delivery: The Use of Patient-Specific Administration Parameters To Improve Nasal Drug Targeting Using 3D-Printed Nasal Replica Casts

scientific article published on 06 March 2018

Plasma deposited stability enhancement coating for amorphous ketoprofen

artículo científico publicado en 2010

Preclinical evaluation of tacrolimus colloidal dispersion for inhalation

artículo científico publicado en 2010

Predicting physical stability of ternary amorphous solid dispersions using specific mechanical energy in a hot melt extrusion process

artículo científico publicado en 2018

Preparation of amorphous solid dispersions by rotary evaporation and KinetiSol Dispersing: approaches to enhance solubility of a poorly water-soluble gum extract.

artículo científico publicado en 2013

Preparation of cyclosporine A nanoparticles by evaporative precipitation into aqueous solution

artículo científico publicado en 2002

Processing thermally labile drugs by hot-melt extrusion: The lesson with gliclazide

artículo científico publicado en 2017

Production of advanced solid dispersions for enhanced bioavailability of itraconazole using KinetiSol Dispersing.

artículo científico publicado en 2010

Properties of heat-humidity cured cellulose acetate phthalate free films.

artículo científico publicado en 2002

Pulmonary dispersion formulations: The impact of dispersed powder properties on pressurized metered dose inhaler stability ⬇️

artículo científico publicado el 10 de diciembre de 2012

Recent developments in drug delivery to prolong allograft survival in lung transplant patients

artículo científico publicado en 2009

Respirable Low-Density Microparticles Formed In Situ from Aerosolized Brittle Matrices ⬇️

artículo científico publicado el 15 de noviembre de 2012

Single dose and multiple dose studies of itraconazole nanoparticles.

artículo científico publicado en 2006

Solid dispersions of itraconazole and enteric polymers made by ultra-rapid freezing.

artículo científico publicado en 2006

Solid lipid nanoparticle formulations of docetaxel prepared with high melting point triglycerides: in vitro and in vivo evaluation.

artículo científico publicado en 2014

Solid-state NMR analysis of crystalline and amorphous Indomethacin: An experimental protocol for full resonance assignments

scientific article published on 06 November 2018

Spray freezing into liquid (SFL) particle engineering technology to enhance dissolution of poorly water soluble drugs: organic solvent versus organic/aqueous co-solvent systems ⬇️

artículo científico publicado el 1 de noviembre de 2003

Spray freezing into liquid nitrogen for highly stable protein nanostructured microparticles

artículo científico publicado en 2004

Spray freezing into liquid versus spray-freeze drying: influence of atomization on protein aggregation and biological activity

artículo científico publicado en 2005

Stabilizer choice for rapid dissolving high potency itraconazole particles formed by evaporative precipitation into aqueous solution.

artículo científico publicado en 2005

Study of solubility of steroids in hydrofluoroalkane propellants

artículo científico publicado en 1999

Supersaturation produces high bioavailability of amorphous danazol particles formed by evaporative precipitation into aqueous solution and spray freezing into liquid technologies.

artículo científico publicado en 2006

Sustained Release Drug Delivery Applications of Polyurethanes.

artículo científico publicado en 2018

Targeted high lung concentrations of itraconazole using nebulized dispersions in a murine model.

artículo científico publicado en 2006

Targeted intestinal delivery of supersaturated itraconazole for improved oral absorption.

artículo científico publicado en 2008

Templated open flocs of anisotropic particles for pulmonary delivery with pressurized metered dose inhalers.

artículo científico publicado en 2010

Templated open flocs of nanorods for enhanced pulmonary delivery with pressurized metered dose inhalers.

artículo científico publicado en 2008

Ternary Amorphous Solid Dispersions Containing a High-Viscosity Polymer and Mesoporous Silica Enhance Dissolution Performance†

artículo científico publicado en 2020

The COVID-19 Vaccine Race: Challenges and Opportunities in Vaccine Formulation

artículo científico publicado en 2020

The Influence of Plasticizer on Heat-Humidity Curing of Cellulose Acetate Phthalate Coated Beads ⬇️

artículo científico publicado el 1 de noviembre de 2001

The impact of pulmonary diseases on the fate of inhaled medicines--a review

artículo científico publicado en 2013

Thermal Processing of PVP- and HPMC-Based Amorphous Solid Dispersions.

artículo científico publicado en 2015

Thermally Conductive Excipient Expands KinetiSol® Processing Capabilities

scientific article published on 11 November 2020

Turbidimetric measurement and prediction of dissolution rates of poorly soluble drug nanocrystals.

artículo científico publicado en 2006

Uniform encapsulation of stable protein nanoparticles produced by spray freezing for the reduction of burst release

artículo científico publicado en 2005

Use of Polyvinyl Alcohol as a Solubility Enhancing Polymer for Poorly Water-Soluble Drug Delivery (Part 2)

artículo científico publicado en 2016

Use of Polyvinyl Alcohol as a Solubility-Enhancing Polymer for Poorly Water Soluble Drug Delivery (Part 1).

artículo científico publicado en 2015

Lista de obras de

A New Extrudable Form of Hypromellose: AFFINISOL™ HPMC HME.

A modified USP induction port to characterize nasal spray plume geometry and predict turbinate deposition under flow

A novel particle engineering technology to enhance dissolution of poorly water soluble drugs: spray-freezing into liquid.

A novel particle engineering technology: spray-freezing into liquid.

Aerosolized nanostructured itraconazole as prophylaxis against invasive pulmonary aspergillosis.

Amorphous compositions using concentration enhancing polymers for improved bioavailability of itraconazole.

Amorphous cyclosporin nanodispersions for enhanced pulmonary deposition and dissolution.

Amorphous solid dispersions and nano-crystal technologies for poorly water-soluble drug delivery ⬇️

Application of co-grinding to formulate a model pMDI suspension

Applications of KinetiSol dispersing for the production of plasticizer free amorphous solid dispersions.

Atmospheric freeze drying for the reduction of powder electrostatics of amorphous, low density, high surface area pharmaceutical powders ⬇️

Bioavailability Improvement of Carbamazepine via Oral Administration of Modified-Release Amorphous Solid Dispersions in Rats

Bioavailability enhancement of a BCS IV compound via an amorphous combination product containing ritonavir.

CNS disorders--current treatment options and the prospects for advanced therapies

Can drug release rate from implants be tailored using poly(urethane) mixtures?

Caveolin-1-derived peptide limits development of pulmonary fibrosis

Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review

Characterization and pharmacokinetic analysis of aerosolized aqueous voriconazole solution.

Characterization and pharmacokinetic analysis of crystalline versus amorphous rapamycin dry powder via pulmonary administration in rats.

Characterization and pharmacokinetic analysis of tacrolimus dispersion for nebulization in a lung transplanted rodent model.

Characterization of an inclusion complex of cholesterol and hydroxypropyl-beta-cyclodextrin

Compaction properties of microcrystalline cellulose and sodium sulfathiazole in combination with talc or magnesium stearate

Comparison of bioavailability of amorphous versus crystalline itraconazole nanoparticles via pulmonary administration in rats.

Cryogenic liquids, nanoparticles, and microencapsulation.

Current therapies and technological advances in aqueous aerosol drug delivery

Delivery Technologies for Orally Inhaled Products: an Update

Design of potent amorphous drug nanoparticles for rapid generation of highly supersaturated media.

Development of Remdesivir as a Dry Powder for Inhalation by Thin Film Freezing

Development of an Excipient-Free Peptide Dry Powder Inhalation for the Treatment of Pulmonary Fibrosis

Dissolution enhancement of itraconazole by hot-melt extrusion alone and the combination of hot-melt extrusion and rapid freezing--effect of formulation and processing variables

Drug delivery strategies for improved azole antifungal action

Drug nanoparticles by antisolvent precipitation: mixing energy versus surfactant stabilization.

Dry powder insufflation of crystalline and amorphous voriconazole formulations produced by thin film freezing to mice

Effect of process variables on morphology and aerodynamic properties of voriconazole formulations produced by thin film freezing

Enabling thermal processing of ritonavir-polyvinyl alcohol amorphous solid dispersions by KinetiSol® Dispersing.

Encapsulation of protein nanoparticles into uniform-sized microspheres formed in a spinning oil film.

Enhanced Aerosolization of High Potency Nanoaggregates of Voriconazole by Dry Powder Inhalation

Enhanced aqueous dissolution of a poorly water soluble drug by novel particle engineering technology: spray-freezing into liquid with atmospheric freeze-drying.

Enhanced drug dissolution using evaporative precipitation into aqueous solution.

Enhanced in vivo absorption of itraconazole via stabilization of supersaturation following acidic-to-neutral pH transition

Enhancing bioavailability through thermal processing ⬇️

Evaluation of the USP dissolution test method A for enteric-coated articles by planar laser-induced fluorescence.

Films loaded with insulin-coated nanoparticles (ICNP) as potential platforms for peptide buccal delivery

Flocculated amorphous itraconazole nanoparticles for enhanced in vitro supersaturation and in vivo bioavailability

Flocculation of polymer stabilized nanocrystal suspensions to produce redispersible powders

Formation of stable submicron protein particles by thin film freezing.

Formulation Composition and Process Affect Counterion for CSP7 Peptide

Formulation and delivery of improved amorphous fenofibrate solid dispersions prepared by thin film freezing

Formulation of a novel fixed dose combination of salmeterol xinafoate and mometasone furoate for inhaled drug delivery.

Formulation of a protein with propellant HFA 134a for aerosol delivery

Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol dispersing.

Has nanotechnology led to improved therapeutic outcomes?

High bioavailability from nebulized itraconazole nanoparticle dispersions with biocompatible stabilizers.

Highly supersaturated solutions of amorphous drugs approaching predictions from configurational thermodynamic properties.

Homogeneity of amorphous solid dispersions - an example with KinetiSol®

Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole

Hot-melt extrusion--basic principles and pharmaceutical applications

How Do You Use AAPS PharmSciTech?

Improvement of dissolution rates of poorly water soluble APIs using novel spray freezing into liquid technology.

In vitro and in vivo performance of dry powder inhalation formulations: comparison of particles prepared by thin film freezing and micronization

Influence of formulation and processing variables on properties of itraconazole nanoparticles made by advanced evaporative precipitation into aqueous solution.

Influence of formulation technique for hydroxypropyl-beta-cyclodextrin on the stability of aspirin in HFA 134a

Influence of hydroxypropyl methylcellulose polymer on in vitro and in vivo performance of controlled release tablets containing alprazolam.

Influence of metering chamber volume and water level on the emitted dose of a suspension-based pMDI containing propellant 134a

Influence of micronization method on the performance of a suspension triamcinolone acetonide pressurized metered-dose inhaler formulation

Influence of particle size on regional lung deposition--what evidence is there?

Influence of process parameters on the preparation of pharmaceutical films by electrostatic powder deposition.

Influence of processing and curing conditions on beads coated with an aqueous dispersion of cellulose acetate phthalate

Inhaled nanoparticles--a current review.

Inhaled voriconazole for prevention of invasive pulmonary aspergillosis.

Long-term stability of heat-humidity cured cellulose acetate phthalate coated beads.

Modified release itraconazole amorphous solid dispersion to treat Aspergillus fumigatus: importance of the animal model selection.

Moisture uptake and its influence on pressurized metered-dose inhalers

Morphology of protein particles produced by spray freezing of concentrated solutions.

Mucoadhesive amorphous solid dispersions for sustained release of poorly water soluble drugs

Murine airway histology and intracellular uptake of inhaled amorphous itraconazole

Nebulization of mycophenolate mofetil inhalation suspension in rats: comparison with oral and pulmonary administration of Cellcept®.

Novel ultra-rapid freezing particle engineering process for enhancement of dissolution rates of poorly water-soluble drugs.

Personalized Medicine in Nasal Delivery: The Use of Patient-Specific Administration Parameters To Improve Nasal Drug Targeting Using 3D-Printed Nasal Replica Casts