Filtros de búsqueda

Lista de obras de Viceconti M

A Patient-Specific Foot Model for the Estimate of Ankle Joint Forces in Patients with Juvenile Idiopathic Arthritis

artículo científico publicado en 2015

A comparative study on different methods of automatic mesh generation of human femurs.

artículo científico publicado en 1998

A comparative study on different methods of automatic mesh generation of human femurs. Medical Engineering and Physics 20 (1998): 1-10

scientific article published on 01 June 2000

A comparison between automatically generated linear and parabolic tetrahedra when used to mesh a human femur.

artículo científico publicado en 2001

A comparison between micro-CT and histology for the evaluation of cortical bone: effect of polymethylmethacrylate embedding on structural parameters

artículo científico publicado en 2011

A computer assisted approach for monitoring and planning biological reconstructions in orthopaedic oncology: preliminary results and future perspectives.

artículo científico publicado en 2003

A generalized procedure for predicting bone mass regulation by mechanical strain

scientific article published on 01 November 1990

A minimal parametric model of the femur to describe axial elastic strain in response to loads

scientific article published on 01 September 1996

A modified method for assigning material properties to FE models of bones.

artículo científico publicado en 2007

A multiscale model to predict current absolute risk of femoral fracture in a postmenopausal population

artículo científico publicado en 2018

A new hip epiphyseal prosthesis: design revision driven by a validated numerical procedure

article

A new meshless approach for subject-specific strain prediction in long bones: Evaluation of accuracy.

artículo científico publicado en 2008

A new method to compare planned and achieved position of an orthopaedic implant

artículo científico publicado en 2003

A new method to monitor bone geometry changes at different spatial scales in the longitudinal in vivo μCT studies of mice bones

artículo científico publicado en 2019

A pictographic atlas for classifying damage modes on polyethylene bearings

artículo científico publicado en 2011

A procedure and criterion for bone cement fracture toughness tests.

artículo científico publicado en 2004

A procedure to estimate the origins and the insertions of the knee ligaments from computed tomography images.

artículo científico publicado en 2014

A software simulation of tibial fracture reduction with external fixator.

artículo científico publicado en 1993

A study of the application sharing capabilities in telemedicine.

artículo científico publicado en 1999

A tentative taxonomy for predictive models in relation to their falsifiability.

artículo científico publicado en 2011

A vision and strategy for the virtual physiological human in 2010 and beyond.

artículo científico publicado en 2010

A vision and strategy for the virtual physiological human: 2012 update.

artículo científico publicado en 2013

About the inevitable compromise between spatial resolution and accuracy of strain measurement for bone tissue: a 3D zero-strain study

artículo científico publicado en 2014

Accuracy and repeatability of cementless total hip replacement surgery in patients with deformed anatomies

artículo científico publicado en 2003

Accurate in vitro identification of fracture onset in bones: failure mechanism of the proximal human femur.

artículo científico publicado en 2012

Advanced multimodal visualisation of clinical gait and fluoroscopy analyses in the assessment of total knee replacement

scientific article published on 01 September 2005

An automated method to position prosthetic components within multiple anatomical spaces.

artículo científico publicado en 2003

An image-based kinematic model of the tibiotalar and subtalar joints and its application to gait analysis in children with Juvenile Idiopathic Arthritis

scientific article published on 09 January 2019

An improved method for the automatic mapping of computed tomography numbers onto finite element models.

artículo científico publicado en 2004

Analysis of titanium induced CT artifacts in the development of biomechanical finite element models

article

Anisotropy and inhomogeneity of the trabecular structure can describe the mechanical strength of osteoarthritic cancellous bone

artículo científico publicado en 2010

Are CT-Based Finite Element Model Predictions of Femoral Bone Strengthening Clinically Useful?

artículo científico publicado en 2018

Are spontaneous fractures possible? An example of clinical application for personalised, multiscale neuro-musculo-skeletal modelling

article

Are subject-specific musculoskeletal models robust to the uncertainties in parameter identification?

artículo científico publicado en 2014

Assessing biocomputational modelling in transforming clinical guidelines for osteoporosis management

scientific article published on 01 January 2011

Assessment of femoral neck fracture risk for a novel proximal epiphyseal hip prosthesis.

artículo científico publicado en 2011

Automatic fracture reduction with a computer-controlled external fixator.

artículo científico publicado en 1994

Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies.

artículo científico publicado en 2004

Big data, big knowledge: big data for personalized healthcare.

artículo científico publicado en 2015

Biomechanical assessment of vertebrae with lytic metastases with subject-specific finite element models

artículo científico publicado en 2019

Biomechanical robustness of a new proximal epiphyseal hip replacement to patient variability and surgical uncertainties: a FE study

scientific article published on 02 August 2011

Biomechanics-based in silico medicine: the manifesto of a new science.

artículo científico publicado en 2014

Bone remodelling adjacent to intramedullary stems: an optimal structures approach.

artículo científico publicado en 1996

Border-tracing algorithm implementation for the femoral geometry reconstruction.

artículo científico publicado en 2001

CT-based surgical planning software improves the accuracy of total hip replacement preoperative planning

artículo científico publicado en 2003

Changes in femur stress after hip resurfacing arthroplasty: response to physiological loads

scientific article published on 25 January 2007

Combined wear behavior and long-term implant-bone fixation of total knee replacement: a novel in vitro set-up.

artículo científico publicado en 2010

Comments on "In vitro analysis of Exeter stem torsional stability" by Bell CG, Weinrauch P, Pearcy M, Crawford R, published on J Arthroplasty. 2007 Oct;22(7):1024-30

artículo científico publicado en 2009

Comments on "Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro" by Jean-Pierre Kassi, Markus O. Heller, Ulrich Stoeckle, Carsten Perka, Georg N. Duda, Published on J. Biomechanics

artículo científico publicado en 2006

Comments on "femoral surface strain in intact composite femurs: a custom computer analysis of the photoelastic coating technique."

artículo científico publicado en 2001

Comments on ‘Experimental versus computational analysis of micromotions at the implant - bone interface’ ⬇️

artículo científico publicado el 1 de mayo de 2012

Comparative study of different tendon grasping techniques for arthroscopic repair of the rotator cuff

artículo científico publicado en 2006

Comprehensive evaluation of PCA-based finite element modelling of the human femur.

artículo científico publicado en 2014

Compressive behaviour of child and adult cortical bone

article

Computer-assisted tridimensional preoperative planning in hip revision surgery

artículo científico publicado en 2003

Computerized mechanical validation of custom-made stems

scientific article published on 01 July 1997

Correction to: Are CT-Based Finite Element Model Predictions of Femoral Bone Strength Clinically Useful?

artículo científico publicado en 2019

Credibility of In Silico Trial Technologies-A Theoretical Framing

scientific article published on 28 October 2019

Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur.

artículo científico publicado en 2007

Dependence of trabecular structure on bone quantity: a comparison between osteoarthritic and non-pathological bone.

artículo científico publicado en 2011

Design revision of a partially cemented hip stem

scientific article published on 01 January 2001

Design-related fretting wear in modular neck hip prosthesis

artículo científico publicado en 1996

Designing a socio-economic assessment method for integrative biomedical research: the Osteoporotic Virtual Physiological Human project

artículo científico publicado en 2009

Developing CT based computational models of pediatric femurs.

artículo científico publicado en 2015

Development of a protocol to quantify local bone adaptation over space and time: Quantification of reproducibility.

artículo científico publicado en 2016

Development of a software for the design of custom-made hip prostheses using an open-source rapid application development environment.

artículo científico publicado en 2000

Differences in proximal femur geometry distinguish vertebral from femoral neck fractures in osteoporotic women

artículo científico publicado en 2004

Effect of Suboptimal Neuromuscular Control on the Risk of Massive Wear in Total Knee Replacement

artículo científico publicado en 2021

Effect of display modality on spatial accuracy of orthopaedic surgery pre-operative planning applications

artículo científico publicado en 2002

Effect of head surface roughness and sterilization on wear of UHMWPE acetabular cups.

artículo científico publicado en 2009

Effect of integration time on the morphometric, densitometric and mechanical properties of the mouse tibia

artículo científico publicado en 2017

Effect of long-term physiological activity on the long-term stem stability of cemented hip arthroplasty: in vitro comparison of three commercial bone cements

artículo científico publicado en 2010

Effect of stem preheating on the fatigue behaviour of bone cement around hip prostheses.

artículo científico publicado en 2009

Effect of sub-optimal neuromotor control on the hip joint load during level walking.

artículo científico publicado en 2011

Effect of the initial implant fitting on the predicted secondary stability of a cementless stem.

artículo científico publicado en 2004

Effect of undersizing on the long-term stability of the Exeter hip stem: A comparative in vitro study

article

Effects of some technological aspects on the fatigue strength of a cementless hip stem

scientific article published on 01 July 1995

Efficacy of stereoscopic visualization and six degrees of freedom interaction in preoperative planning of total hip replacement.

artículo científico publicado en 2006

Endurance testing of hip prostheses: a comparison between the load fixed in ISO 7206 standard and the physiological loads

scientific article published on 01 June 1999

Engineering for health.

artículo científico publicado en 2007

Estimation of local anisotropy of plexiform bone: Comparison between depth sensing micro-indentation and Reference Point Indentation

artículo científico publicado en 2015

Evaluation of achievable registration accuracy of the femur during minimally invasive total hip replacement.

artículo científico publicado en 2005

Evaluation of in-vivo measurement errors associated with micro-computed tomography scans by means of the bone surface distance approach.

artículo científico publicado en 2015

Evaluation of the generality and accuracy of a new mesh morphing procedure for the human femur.

artículo científico publicado en 2010

Experimental validation of DXA-based finite element models for prediction of femoral strength.

artículo científico publicado en 2016

Extensive risk analysis of mechanical failure for an epiphyseal hip prothesis: a combined numerical-experimental approach

scientific article published on 01 February 2011

Extracting clinically relevant data from finite element simulations.

artículo científico publicado en 2005

Femoral neck strain prediction during level walking using a combined musculoskeletal and finite element model approach

artículo científico publicado en 2021

Finite element modeling of resurfacing hip prosthesis: estimation of accuracy through experimental validation

artículo científico publicado en 2010

Fracture prediction for the femoral neck using finite element models.

artículo científico publicado en 2001

Fracture properties of an acrylic bone cement.

artículo científico publicado en 2008

Fretting wear in a modular neck hip prosthesis.

artículo científico publicado en 1997

From bed to bench: How in silico medicine can help ageing research

artículo científico publicado en 2018

Global asymptotic stability of bone remodeling theories: a new approach based on non-linear dynamical systems analysis.

artículo científico publicado en 1998

Growth and remodelling of the autologous bone transplant used in a pediatric femoral reconstruction

artículo científico publicado en 2002

Hip-Op: an innovative software to plan total hip replacement surgery.

artículo científico publicado en 2002

Human bone hardness seems to depend on tissue type but not on anatomical site in the long bones of an old subject.

artículo científico publicado en 2013

In vitro replication of spontaneous fractures of the proximal human femur

article

Increased long-term failure risk associated with excessively thin cement mantle in cemented hip arthroplasty: a comparative in vitro study

artículo científico publicado en 2007

Influence of thigh muscles on the axial strains in a proximal femur during early stance in gait

artículo científico publicado en 1995

Integrated friction measurements in hip wear simulations: short-term results

article

Investigating the mechanical response of paediatric bone under bending and torsion using finite element analysis

artículo científico publicado en 2018

Investigation of the dependence of joint contact forces on musculotendon parameters using a codified workflow for image-based modelling.

artículo científico publicado en 2018

Is ceramic-on-ceramic squeaking phenomenon reproducible in vitro? A long-term simulator study under severe conditions

scientific article published on 01 October 2009

Is laterality associated with a higher rate of hip arthroplasty on the dominant side?

artículo científico publicado en 2008

Large-scale finite element analysis of human cancellous bone tissue micro computer tomography data: a convergence study.

artículo científico publicado en 2014

Letter to the editor commenting on "Multilevel finite element modeling for the prediction of local cellular deformation in bone," Deligianni DD and Apostolopoulos CA (2008) Biomech Model Mechanobiol 7(2):151-159

artículo científico publicado en 2008

Linking Joint Impairment and Gait Biomechanics in Patients with Juvenile Idiopathic Arthritis

scientific article published on 20 May 2019

Local displacement and strain uncertainties in different bone types by digital volume correlation of synchrotron microtomograms.

artículo científico publicado en 2017

Longitudinal effects of Parathyroid Hormone treatment on morphological, densitometric and mechanical properties of mouse tibia.

artículo científico publicado en 2017

Low-dose computed tomography: a solution for in vivo medical imaging and accurate patient-specific 3D bone modeling?

artículo científico publicado en 2006

Material properties assignment to finite element models of bone structures: a new method.

artículo científico publicado en 1998

Mathematical relationships between bone density and mechanical properties: a literature review.

artículo científico publicado en 2007

Mechanical strength of a femoral reconstruction in paediatric oncology: a finite element study.

artículo científico publicado en 2003

Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements

artículo científico publicado en 2007

Mechanical validation of whole bone composite tibia models

article

Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator.

artículo científico publicado en 2006

Metallic wear debris in dual modular hip arthroplasty.

artículo científico publicado en 1997

Methods for quantitative analysis of the primary stability in uncemented hip prostheses

artículo científico publicado en 1999

Micro Finite Element models of the vertebral body: Validation of local displacement predictions

artículo científico

Micro-CT based finite element models of cancellous bone predict accurately displacement once the boundary condition is well replicated: A validation study

artículo científico publicado en 2016

MicroCT examination of human bone specimens: effects of polymethylmethacrylate embedding on structural parameters.

artículo científico publicado en 2007

Microindentation on cortical human bone: effects of tissue condition and indentation location on hardness values

article

Modelling osteomyelitis

artículo científico publicado en 2012

Multilevel Computational Modeling and Quantitative Analysis of Bone Remodeling ⬇️

artículo científico publicado el 1 de septiembre de 2012

Multiple loading conditions analysis can improve the association between finite element bone strength estimates and proximal femur fractures: a preliminary study in elderly women

artículo científico publicado en 2014

Multiscale investigation of the functional properties of the human femur.

artículo científico publicado en 2008

Multiscale modeling methods in biomechanics

artículo científico publicado en 2017

Multiscale modelling and team science: the future of orthopaedic biomechanics.

artículo científico publicado en 2008

Muscle discretization affects the loading transferred to bones in lower-limb musculoskeletal models.

artículo científico publicado en 2012

Muscle recruitment strategies can reduce joint loading during level walking

artículo científico publicado en 2019

New aspects and approaches in pre-operative planning of hip reconstruction: a computer simulation.

artículo científico publicado en 2004

Numerical model to predict the long-term mechanical stability of cementless orthopaedic implants.

artículo científico publicado en 2004

On the biomechanical stability of cementless straight conical hip stems

artículo científico publicado en 2006

On the mechanical stability of porous coated press fit titanium implants: a finite element study of a pushout test.

artículo científico publicado en 2008

Optimal CT scanning plan for long-bone 3-D reconstruction.

artículo científico publicado en 1998

Osteon classification in human fibular shaft by circularly polarized light

article

Partially cemented AncaDualFit hip stems do not fail in simulated active patients.

artículo científico publicado en 2006

Patient-specific finite element estimated femur strength as a predictor of the risk of hip fracture: the effect of methodological determinants

artículo científico publicado en 2016

Personal Digital Assistant in an orthopaedic wireless ward: the HandHealth project.

artículo científico publicado en 2007

Policy needs and options for a common approach towards modelling and simulation of human physiology and diseases with a focus on the virtual physiological human

artículo científico publicado el 1 de enero de 2011

Polyethylene damage and deformation on fixed-bearing, non-conforming unicondylar knee replacements corresponding to progressive changes in alignment and fixation.

artículo científico publicado en 2010

Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods

artículo científico publicado en 2001

Pre-clinical validation of joint prostheses: a systematic approach

artículo científico publicado en 2008

Pre-operative prediction of soft tissue balancing in knee arthoplasty part 1: Effect of surgical parameters during level walking

artículo científico publicado en 2019

Preclinical assessment of the long-term endurance of cemented hip stems. Part 1: effect of daily activities--a comparison of two load histories.

artículo científico publicado en 2007

Predicting the subject-specific primary stability of cementless implants during pre-operative planning: preliminary validation of subject-specific finite-element models.

artículo científico publicado en 2007

Predictive role of the lambda ratio in the evaluation of metal-on-metal total hip replacement.

artículo científico publicado en 2008

Primary stability of an anatomical cementless hip stem: a statistical analysis.

artículo científico publicado en 2005

Quality control protocol for in vitro micro-computed tomography

artículo científico publicado en 2010

Radiographic evaluation of HDPE cemented and cementless Lord and An.C.A. screwed acetabular models

artículo científico publicado en 1992

Re-use of explanted osteosynthesis devices: a reliable and inexpensive reprocessing protocol.

artículo científico publicado en 2011

Reduced tissue hardness of trabecular bone is associated with severe osteoarthritis

artículo científico publicado en 2011

Relationship between biometric characteristics and stem size of uncemented hip prostheses.

artículo científico publicado en 2007

Repeatability of experimental procedures to determine mechanical behaviour of ligaments

article

Repeatable procedure for evaluating taper damage on femoral stems with modular necks.

artículo científico publicado en 2011

Risk of fracture in elderly patients: a new predictive index based on bone mineral density and finite element analysis

article

SOA-based digital library services and composition in biomedical applications ⬇️

artículo científico publicado el 17 de septiembre de 2010

Selection of the best element type in the finite element analysis of hip prostheses

artículo científico publicado en 2000

Sensitivity of a juvenile subject-specific musculoskeletal model of the ankle joint to the variability of operator-dependent input.

artículo científico publicado en 2017

Sensitivity of a subject-specific musculoskeletal model to the uncertainties on the joint axes location

artículo científico publicado en 2014

Special Issue on 'Computational Modelling in Medicine': Guest editor introduction

artículo científico publicado en 2017

Specialised CT scan protocols for 3-D pre-operative planning of total hip replacement

artículo científico publicado en 2004

Stochastic modelling of muscle recruitment during activity

artículo científico publicado en 2015

Strain distribution in the lumbar vertebrae under different loading configurations

article

Strain distribution in the proximal human femoral metaphysis

artículo científico publicado en 2009

Strain distribution within the human femur due to physiological and simplified loading: finite element analysis using the muscle standardized femur model

scientific article published on 01 January 2003

Stress shielding and stress concentration of contemporary epiphyseal hip prostheses

scientific article published on 01 January 2009

Structural behaviour and strain distribution of the long bones of the human lower limbs

scientific article published on 23 December 2009

Structural parameters and mechanical strength of cancellous bone in the femoral head in osteoarthritis do not depend on age

scientific article published on 01 August 2007

Subject-specific finite element models can accurately predict strain levels in long bones

article

Subject-specific finite element models implementing a maximum principal strain criterion are able to estimate failure risk and fracture location on human femurs tested in vitro

article

Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy

artículo científico publicado en 2005

TRI2SOLID: an application of reverse engineering methods to the creation of CAD models of bone segments ⬇️

artículo científico publicado el 1 de junio de 1998

The 'standardized femur program' proposal for a reference geometry to be used for the creation of finite element models of the femur.

artículo científico publicado en 1996

The EuroPhysiome, STEP and a roadmap for the virtual physiological human

artículo científico publicado en 2008

The Virtual Physiological Human.

artículo científico publicado en 2011

The Virtual Physiological Human: Ten Years After

artículo científico publicado en 2016

The effect of autoclaving on the mechanical properties of bank bovine bone.

artículo científico publicado en 1996

The effect of boundary and loading conditions on patient classification using finite element predicted risk of fracture

artículo científico publicado en 2019

The effect of sandblasting treatment on endurance properties of titanium alloy hip prostheses

artículo científico publicado en 2000

The effect of tissue condition and applied load on Vickers hardness of human trabecular bone

scientific article published on 27 June 2007

The effect of vacuum mixing and pre-heating the femoral component on the mechanical properties of the cement mantle

artículo científico publicado en 2010

The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone.

artículo científico publicado en 2008

The human proximal femur behaves linearly elastic up to failure under physiological loading conditions

artículo científico publicado en 2011

The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements.

artículo científico publicado en 2006

The muscle standardised femur

artículo científico publicado en 2003

The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints.

artículo científico publicado en 2006

The primary stability of a cementless stem varies between subjects as much as between activities.

artículo científico publicado en 2003

The role of parameter identification in finite element contact analyses with reference to orthopaedic biomechanics applications ⬇️

artículo científico publicado el 1 de enero de 2002

The virtual physiological human. Editorial.

artículo científico publicado en 2008

The virtual physiological human: building a framework for computational biomedicine I. Editorial

artículo científico publicado en 2008

The virtual physiological human: computer simulation for integrative biomedicine II.

artículo científico publicado en 2010

Thermomechanical analysis of ultra-high molecular weight polyethylene-metal hip prostheses.

artículo científico publicado en 2007

Three-dimensional local measurements of bone strain and displacement: comparison of three digital volume correlation approaches.

artículo científico publicado en 2015

Toward a Regulatory Qualification of Real-World Mobility Performance Biomarkers in Parkinson's Patients Using Digital Mobility Outcomes

artículo científico publicado en 2020

Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods.

artículo científico publicado en 2008

Using Musculoskeletal Models to Estimate <i>in vivo</i> Total Knee Replacement Kinematics and Loads: Effect of Differences Between Models

artículo científico publicado en 2021

Virtual palpation of skeletal landmarks with multimodal display interfaces.

artículo científico publicado en 2007

Volume to density relation in adult human bone tissue

scientific article published on 17 September 2010

Wear behaviour in total ankle replacement: a comparison between an in vitro simulation and retrieved prostheses.

artículo científico publicado en 2009

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda