Lista de obras - Umar Khan - Dominio Público Uruguay

A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes

artículo científico publicado en 2016

A Technique To Pretreat Graphite Which Allows the Rapid Dispersion of Defect-Free Graphene in Solvents at High Concentration

A comparison of catabolic pathways induced in primary macrophages by pristine single walled carbon nanotubes and pristine graphene

scholarly article in RSC Advances, vol. 6 no. 70, 2016

Approaching the theoretical limit for reinforcing polymers with graphene

article published in 2012

Development of stiff, strong, yet tough composites by the addition of solvent exfoliated graphene to polyurethane

article

Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS2/Nanotube Composite Lithium Ion Battery Electrodes

artículo científico publicado en 2016

Electroconductive Biohybrid Collagen/Pristine Graphene Composite Biomaterials with Enhanced Biological Activity

Enhancing the mechanical properties of BN nanosheet-polymer composites by uniaxial drawing.

artículo científico publicado en 2014

Flexible, transparent dielectric capacitors with nanostructured electrodes

Graphene Dispersion and Exfoliation in Low Boiling Point Solvents

article

Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics

article published in 2016

Graphene-MoS2nanosheet composites as electrodes for dye sensitised solar cells

High Quality Dispersions of Functionalized Single Walled Nanotubes at High Concentration

High stiffness nano-composite fibres from polyvinylalcohol filled with graphene and boron nitride

scholarly article in Carbon, vol. 99, April 2016

High strength composite fibres from polyester filled with nanotubes and graphene

High-concentration, surfactant-stabilized graphene dispersions

artículo científico publicado en 2010

Improved adhesive strength and toughness of polyvinyl acetate glue on addition of small quantities of graphene

artículo científico publicado en 2013

Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains

scholarly article in Carbon, vol. 52, February 2013

Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites

Inverting Polyurethanes Synthesis: Effects on Nano/Micro-Structure and Mechanical Properties

scholarly article by B. Fernández-d´Arlas et al published 30 December 2010 in Soft Materials

Mechanical Reinforcement of Polymers Using Carbon Nanotubes

Observation of mechanical percolation in functionalized graphene oxide/elastomer composites

scholarly article in Carbon, vol. 50 no. 12, October 2012

Photoconductivity of solution-processed MoS2 films

article

Photoluminescence from Liquid-Exfoliated WS2Monomers in Poly(Vinyl Alcohol) Polymer Composites

Polymer reinforcement using liquid-exfoliated boron nitride nanosheets

artículo científico publicado en 2012

Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size

Reinforcement in melt-processed polymer–graphene composites at extremely low graphene loading level

scholarly article in Carbon, vol. 78, November 2014

Reinforcement of metal with liquid-exfoliated inorganic nano-platelets

scholarly article by Peter May et al published 14 October 2013 in Applied Physics Letters

Role of Solubility Parameters in Understanding the Steric Stabilization of Exfoliated Two-Dimensional Nanosheets by Adsorbed Polymers

Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids

artículo científico publicado en 2014

Selective Mechanical Reinforcement of Thermoplastic Polyurethane by Targeted Insertion of Functionalized SWCNTs

Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites

artículo científico publicado en 2016

Sensitive, high-strain, high-rate bodily motion sensors based on graphene-rubber composites

artículo científico publicado en 2014

Size effects and the problem with percolation in nanostructured transparent conductors

artículo científico publicado en 2010

Size selection of dispersed, exfoliated graphene flakes by controlled centrifugation

scholarly article in Carbon, vol. 50 no. 2, February 2012

Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites

artículo científico publicado en 2006

Strong, Tough, Electrospun Polymer-Nanotube Composite Membranes with Extremely Low Density

Study of the mechanical, electrical and morphological properties of PU/MWCNT composites obtained by two different processing routes

Surface coatings of silver nanowires lead to effective, high conductivity, high-strain, ultrathin sensors

artículo científico publicado en 2017

The effect of solvent choice on the mechanical properties of carbon nanotube–polymer composites

The preparation of hybrid films of carbon nanotubes and nano-graphite/graphene with excellent mechanical and electrical properties

scholarly article by Umar Khan et al published August 2010 in Carbon

Thermoelectric behavior of organic thin film nanocomposites

article

Two-dimensional nanosheets produced by liquid exfoliation of layered materials

artículo científico publicado en 2011

Understanding the Dispersion and Assembly of Bacterial Cellulose in Organic Solvents

artículo científico publicado en 2016

Lista de obras de Umar Khan

A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes

A Technique To Pretreat Graphite Which Allows the Rapid Dispersion of Defect-Free Graphene in Solvents at High Concentration

A comparison of catabolic pathways induced in primary macrophages by pristine single walled carbon nanotubes and pristine graphene

Approaching the theoretical limit for reinforcing polymers with graphene

Development of stiff, strong, yet tough composites by the addition of solvent exfoliated graphene to polyurethane

Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS2/Nanotube Composite Lithium Ion Battery Electrodes

Electroconductive Biohybrid Collagen/Pristine Graphene Composite Biomaterials with Enhanced Biological Activity

Enhancing the mechanical properties of BN nanosheet-polymer composites by uniaxial drawing.

Flexible, transparent dielectric capacitors with nanostructured electrodes

Graphene Dispersion and Exfoliation in Low Boiling Point Solvents

Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics

Graphene-MoS2nanosheet composites as electrodes for dye sensitised solar cells

High Quality Dispersions of Functionalized Single Walled Nanotubes at High Concentration

High stiffness nano-composite fibres from polyvinylalcohol filled with graphene and boron nitride

High strength composite fibres from polyester filled with nanotubes and graphene

High-concentration, surfactant-stabilized graphene dispersions

Improved adhesive strength and toughness of polyvinyl acetate glue on addition of small quantities of graphene

Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains

Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites

Inverting Polyurethanes Synthesis: Effects on Nano/Micro-Structure and Mechanical Properties

Mechanical Reinforcement of Polymers Using Carbon Nanotubes

Observation of mechanical percolation in functionalized graphene oxide/elastomer composites

Photoconductivity of solution-processed MoS2 films

Photoluminescence from Liquid-Exfoliated WS2Monomers in Poly(Vinyl Alcohol) Polymer Composites

Polymer reinforcement using liquid-exfoliated boron nitride nanosheets

Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size

Reinforcement in melt-processed polymer–graphene composites at extremely low graphene loading level

Reinforcement of metal with liquid-exfoliated inorganic nano-platelets

Role of Solubility Parameters in Understanding the Steric Stabilization of Exfoliated Two-Dimensional Nanosheets by Adsorbed Polymers

Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids

Selective Mechanical Reinforcement of Thermoplastic Polyurethane by Targeted Insertion of Functionalized SWCNTs

Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites

Sensitive, high-strain, high-rate bodily motion sensors based on graphene-rubber composites

Size effects and the problem with percolation in nanostructured transparent conductors

Size selection of dispersed, exfoliated graphene flakes by controlled centrifugation

Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites

Strong, Tough, Electrospun Polymer-Nanotube Composite Membranes with Extremely Low Density

Study of the mechanical, electrical and morphological properties of PU/MWCNT composites obtained by two different processing routes

Surface coatings of silver nanowires lead to effective, high conductivity, high-strain, ultrathin sensors

The effect of solvent choice on the mechanical properties of carbon nanotube–polymer composites

The preparation of hybrid films of carbon nanotubes and nano-graphite/graphene with excellent mechanical and electrical properties

Thermoelectric behavior of organic thin film nanocomposites

Two-dimensional nanosheets produced by liquid exfoliation of layered materials

Understanding the Dispersion and Assembly of Bacterial Cellulose in Organic Solvents