Lista de obras - John Neil Waddell - Dominio Público Uruguay

A comparison of fit of CNC-milled titanium and zirconia frameworks to implants.

artículo científico publicado en 2011

A novel in vitro approach to assess the fit of implant frameworks

scientific article published on 06 October 2010

Additive Technology: Update on Current Materials and Applications in Dentistry

artículo científico publicado en 2016

Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium

artículo científico publicado en 2019

Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases

artículo científico publicado en 2018

An Investigation Of The Causes Of Clinical Failure Of Soldered Bar Attachment Systems In Implant Supported Overdentures ⬇️

2012 doctoral thesis by John Neil Waddell at University of Otago

Biomechanical investigation of impact induced rib fractures of a porcine infant surrogate model.

artículo científico publicado en 2016

Bond Strength between CAD/CAM PMMA Denture Base Resins and Characterisation Composites

Clinical tooth preparations and associated measuring methods: a systematic review.

artículo científico publicado en 2014

Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co-Cr dental alloys.

artículo científico publicado en 2015

Continuous measurement of intra-oral pH and temperature: development, validation of an appliance and a pilot study.

artículo científico publicado en 2015

Convergence angles and margin widths of tooth preparations by New Zealand dental students

artículo científico publicado en 2016

Coordinate geometry method for capturing and evaluating crown preparation geometry.

artículo científico publicado en 2014

Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine.

artículo científico publicado en 2011

Curing through Ceramics: Influence of Different Light-Curing Units and Curing Modes on Bond Strength

Denture–Mucosa Pressure Distribution and Pressure–Pain Threshold in In Vivo, In Vitro and In Silico Studies: A Literature Review

Development of a skull/brain model for military wound ballistics studies.

artículo científico publicado en 2014

Effect of autoclave induced low-temperature degradation on the adhesion energy between yttria-stabilized zirconia veneered with porcelain

artículo científico publicado en 2013

Elastic behavior of brain simulants in comparison to porcine brain at different loading velocities.

artículo científico publicado en 2017

Estimation of jaw-opening forces in adults.

artículo científico publicado en 2017

Experimental simulation of non-ballistic wounding by sharp and blunt punches

artículo científico publicado en 2008

Fabrication of a self-retaining surgical template for surgical placement of dental implants for the partially edentulous patient.

artículo científico publicado en 2005

Fibre-reinforced and repaired PMMA denture base resin: Effect of placement on the flexural strength and load-bearing capacity

Finite element models and material data for analysis of infant head impacts

scientific article published on 08 December 2018

Gunshot residue preservation in seawater.

artículo científico publicado en 2015

Influence of a tungsten metal conditioner on the adhesion and residual stress of porcelain bonded to cobalt-chromium alloy.

artículo científico publicado en 2014

Influence of surface penetration on measured fluid force on a hand model

artículo científico publicado en 2008

Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

artículo científico publicado en 2006

Influence of water, loading rate and bonder on the adhesion of porcelain to titanium.

artículo científico publicado en 2006

Intraoral pH and temperature during sleep with and without mouth breathing.

artículo científico publicado en 2015

Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

artículo científico publicado en 2016

Investigation of dental materials as skin simulants for forensic skin/skull/brain model impact testing.

artículo científico publicado en 2015

Investigation of the elastic modulus, tensile and flexural strength of five skull simulant materials for impact testing of a forensic skin/skull/brain model

artículo científico publicado en 2017

Measuring intraoral pressure: adaptation of a dental appliance allows measurement during function

artículo científico publicado en 2007

Mechanical properties of the human scalp in tension

artículo científico publicado en 2018

Physical and metallurgical considerations of failures of soldered bars in bar attachment systems for implant overdentures: a review of the literature.

artículo científico publicado en 2006

Porcelain bonding to novel Co-Cr alloys: Influence of interfacial reactions on phase stability, plasticity and adhesion

scientific article published on 23 September 2016

Pressed ceramics onto zirconia. Part 2: indentation fracture and influence of cooling rate on residual stresses.

artículo científico publicado en 2011

Quantification of subconcussive impact forces to the head using a forensic model.

artículo científico publicado en 2015

Reporting numeric values of complete crowns. Part 1: Clinical preparation parameters.

artículo científico publicado en 2015

Reporting numeric values of complete crowns. Part 2: Retention and resistance theories

artículo científico publicado en 2015

Scalp simulation - A novel approach to site-specific biomechanical modeling of the skin

artículo científico publicado en 2017

Simulating backspatter of blood from cranial gunshot wounds using pig models.

artículo científico publicado en 2015

Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment

artículo científico publicado en 2015

Surface Characteristics and Biofilm Development on Selected Dental Ceramic Materials

artículo científico publicado en 2017

The deer femur - a morphological and biomechanical animal model of the human femur

artículo científico publicado en 2014

The influence of opaque application methods on the bond strength and final shade of PFM restorations.

artículo científico publicado en 2010

The influence of undercut depths on the accuracy of casts poured from irreversible hydrocolloid impression materials

scientific article published on 14 January 2020

Tongue pressure patterns during water swallowing.

artículo científico publicado en 2009

Use of agar/glycerol and agar/glycerol/water as a translucent brain simulant for ballistic testing

artículo científico publicado en 2016

Using a motion-capture system to record dynamic articulation for application in CAD/CAM software.

artículo científico publicado en 2009

Lista de obras de John Neil Waddell

A comparison of fit of CNC-milled titanium and zirconia frameworks to implants.

A novel in vitro approach to assess the fit of implant frameworks

Additive Technology: Update on Current Materials and Applications in Dentistry

Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium

Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases

An Investigation Of The Causes Of Clinical Failure Of Soldered Bar Attachment Systems In Implant Supported Overdentures ⬇️

Biomechanical investigation of impact induced rib fractures of a porcine infant surrogate model.

Bond Strength between CAD/CAM PMMA Denture Base Resins and Characterisation Composites

Clinical tooth preparations and associated measuring methods: a systematic review.

Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co-Cr dental alloys.

Continuous measurement of intra-oral pH and temperature: development, validation of an appliance and a pilot study.

Convergence angles and margin widths of tooth preparations by New Zealand dental students

Coordinate geometry method for capturing and evaluating crown preparation geometry.

Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine.

Curing through Ceramics: Influence of Different Light-Curing Units and Curing Modes on Bond Strength

Denture–Mucosa Pressure Distribution and Pressure–Pain Threshold in In Vivo, In Vitro and In Silico Studies: A Literature Review

Development of a skull/brain model for military wound ballistics studies.

Effect of autoclave induced low-temperature degradation on the adhesion energy between yttria-stabilized zirconia veneered with porcelain

Elastic behavior of brain simulants in comparison to porcine brain at different loading velocities.

Estimation of jaw-opening forces in adults.

Experimental simulation of non-ballistic wounding by sharp and blunt punches

Fabrication of a self-retaining surgical template for surgical placement of dental implants for the partially edentulous patient.

Fibre-reinforced and repaired PMMA denture base resin: Effect of placement on the flexural strength and load-bearing capacity

Finite element models and material data for analysis of infant head impacts

Gunshot residue preservation in seawater.

Influence of a tungsten metal conditioner on the adhesion and residual stress of porcelain bonded to cobalt-chromium alloy.

Influence of surface penetration on measured fluid force on a hand model

Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

Influence of water, loading rate and bonder on the adhesion of porcelain to titanium.

Intraoral pH and temperature during sleep with and without mouth breathing.

Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

Investigation of dental materials as skin simulants for forensic skin/skull/brain model impact testing.

Investigation of the elastic modulus, tensile and flexural strength of five skull simulant materials for impact testing of a forensic skin/skull/brain model

Measuring intraoral pressure: adaptation of a dental appliance allows measurement during function

Mechanical properties of the human scalp in tension

Physical and metallurgical considerations of failures of soldered bars in bar attachment systems for implant overdentures: a review of the literature.

Porcelain bonding to novel Co-Cr alloys: Influence of interfacial reactions on phase stability, plasticity and adhesion

Pressed ceramics onto zirconia. Part 2: indentation fracture and influence of cooling rate on residual stresses.

Quantification of subconcussive impact forces to the head using a forensic model.

Reporting numeric values of complete crowns. Part 1: Clinical preparation parameters.

Reporting numeric values of complete crowns. Part 2: Retention and resistance theories

Scalp simulation - A novel approach to site-specific biomechanical modeling of the skin

Simulating backspatter of blood from cranial gunshot wounds using pig models.

Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment

Surface Characteristics and Biofilm Development on Selected Dental Ceramic Materials

The deer femur - a morphological and biomechanical animal model of the human femur

The influence of opaque application methods on the bond strength and final shade of PFM restorations.

The influence of undercut depths on the accuracy of casts poured from irreversible hydrocolloid impression materials

Tongue pressure patterns during water swallowing.

Use of agar/glycerol and agar/glycerol/water as a translucent brain simulant for ballistic testing

Using a motion-capture system to record dynamic articulation for application in CAD/CAM software.