Lista de obras - Nicoleta Ilie - Dominio Público Uruguay

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

artículo científico publicado en 2017

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

artículo científico publicado en 2017

An in vitro study on the maturation of conventional glass ionomer cements and their interface to dentin

scientific article published on 13 August 2013

An in-vitro assessment of the shear bond strength of bulk-fill resin composites to permanent and deciduous teeth.

artículo científico publicado en 2014

Analysis of resin tags formation in root canal dentine: a cross sectional study.

artículo científico publicado en 2010

Antioxidants and Collagen-Crosslinking: Benefit on Bond Strength and Clinical Applicability

artículo científico publicado en 2020

Artificial saliva contamination effects on bond strength of self-etching primers

artículo científico publicado en 2008

Blue-Light Transmittance of Esthetic Monolithic CAD/CAM Materials With Respect to Their Composition, Thickness, and Curing Conditions

artículo científico publicado en 2016

Bulk fill restoratives: to cap or not to cap--that is the question?

artículo científico publicado en 2015

Can CQ be completely replaced by alternative initiators in dental adhesives?

artículo científico publicado en 2008

Comparative Effect of Self- or Dual-Curing on Polymerization Kinetics and Mechanical Properties in a Novel, Dental-Resin-Based Composite with Alkaline Filler. Running Title: Resin-Composites with Alkaline Fillers.

artículo científico publicado en 2018

Comparison of biogenerically reconstructed and waxed-up complete occlusal surfaces with respect to the original tooth morphology

artículo científico publicado en 2012

Curing behavior of a nanocomposite as a function of polymerization procedure.

artículo científico publicado en 2005

Curing behaviour of high-viscosity bulk-fill composites

scientific article published on 02 June 2014

Curing efficiency of modern LED units.

artículo científico publicado en 2011

Degree of conversion of nano-hybrid resin-based composites with novel and conventional matrix formulation.

artículo científico publicado en 2012

Dentin Bond Strength of Experimental Composites Containing Bioactive Glass: Changes During Aging for up to 1 Year

artículo científico publicado en 2018

Dentin infiltration ability of different classes of adhesive systems ⬇️

artículo científico publicado el 29 de febrero de 2012

Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation

scientific article published on 02 December 2011

Determination of homologous distributions of bisEMA dimethacrylates in bulk-fill resin-composites by GC-MS

artículo científico publicado en 2015

Does a reduction of polymerization time and bonding steps affect the bond strength of brackets?

artículo científico publicado en 2011

Effect of curing mode on the micro-mechanical properties of dual-cured self-adhesive resin cements

scientific article published on 25 February 2011

Effect of different curing protocols on the mechanical properties of low-viscosity bulk-fill composites

artículo científico publicado en 2014

Effect of gloss and heat on the mechanical behaviour of a glass carbomer cement.

artículo científico publicado en 2012

Effect of modulated irradiation time on the degree of conversion and the amount of elutable substances from nano-hybrid resin-based composites

artículo científico publicado en 2013

Effect of ozone gas application on the mechanical properties of dental adhesives bonded to dentin.

artículo científico publicado en 2008

Effect of polymerisation and ageing on the incremental bond strength of ormocer-based dental materials

scientific article published on 06 September 2012

Effect of radical amplified photopolymerization (RAP) in resin-based composites.

artículo científico publicado en 2013

Effect of sonic-activated resin composites on the repair of aged substrates: an in vitro investigation.

artículo científico publicado en 2013

Effect of storage medium and aging duration on mechanical properties of self-adhesive resin-based cements.

artículo científico publicado en 2017

Effectiveness of ozone against periodontal pathogenic microorganisms

artículo científico publicado en 2011

Effects of aging and irradiation time on the properties of a highly translucent resin-based composite

scientific article published on 01 January 2013

Effects of ceramic shade and thickness on the micro-mechanical properties of a light-cured resin cement in different shades

artículo científico publicado en 2015

Effects of exposure time and exposure distance on the degree of cure in light-activated pit and fissure sealants

artículo científico publicado en 2013

Efficacy of Modern Light Curing Units in Polymerizing Peripheral Zones in Simulated Large Bulk-fill Resin-composite Fillings

scientific article published on 23 March 2018

Efficacy of four preventive measures against enamel demineralization at the bracket periphery-comparison of microhardness and confocal laser microscopy analysis.

artículo científico publicado en 2015

Efficiency of different repair kits on bonding to aged dental resin composite substrates

Erratum: Ilie, N. Comparative Effect of Self- or Dual-Curing on Polymerization Kinetics and Mechanical Properties in a Novel, Dental-Resin-Based Composite with Alkaline Filler. Running Title: Resin-Composites with Alkaline Fillers. <i>Materials</i>

scientific article published on 07 December 2020

Evaluation of a conventional glass ionomer cement with new zinc formulation: effect of coating, aging and storage agents

artículo científico publicado en 2012

Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage

artículo científico publicado en 2005

Evaluation of modern bioactive restoratives for bulk-fill placement.

artículo científico publicado en 2016

Evaluation of the mechanical properties of dental adhesives and glass-ionomer cements

artículo científico publicado en 2009

Fracture and viscoelastic behavior of novel self-adhesive materials for simplified restoration concepts

artículo científico publicado en 2021

Fracture toughness of dental restorative materials ⬇️

artículo científico publicado el 2 de marzo de 2011

How to repair fillings made by silorane-based composites

scientific article published on 16 October 2010

Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites

artículo científico publicado en 2017

In vitro comparison of mechanical properties and degree of cure of a self-adhesive and four novel flowable composites.

artículo científico publicado en 2013

In vitro comparison of mechanical properties and degree of cure of bulk fill composites.

artículo científico publicado en 2012

In vitro comparison of polymerisation kinetics and the micro-mechanical properties of low and high viscosity giomers and RBC materials.

artículo científico publicado en 2015

Influence of ceramic thickness and type on micromechanical properties of light-cured adhesive bonding agents.

artículo científico publicado en 2014

Influence of ozone on the composite-to-composite bond

artículo científico publicado en 2010

Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites.

artículo científico publicado en 2013

Investigation of different bleaching conditions on the amount of elutable substances from nano-hybrid composites

artículo científico publicado en 2013

Investigation of shear-peel bond strength of orthodontic brackets on enamel after using Pro Seal

artículo científico publicado en 2006

Investigations on a methacrylate-based flowable composite based on the SDR™ technology

scientific article published on 30 December 2010

Investigations on mechanical behaviour of dental composites.

artículo científico publicado en 2009

Investigations towards nano-hybrid resin-based composites ⬇️

artículo científico publicado el 6 de marzo de 2012

Is the soft-start polymerisation concept still relevant for modern curing units?

scientific article published on 24 November 2009

Laboratory mechanical parameters of composite resins and their relation to fractures and wear in clinical trials-A systematic review.

artículo científico publicado en 2016

Light curing through glass ceramics: effect of curing mode on micromechanical properties of dual-curing resin cements

scientific article published on 09 August 2013

Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites.

artículo científico publicado en 2014

Long-Term Stability of a RAFT-Modified Bulk-Fill Resin-Composite under Clinically Relevant Versus ISO-Curing Conditions

scientific article published on 25 November 2020

Long-term effectiveness of four pulpotomy techniques: 3-year randomised controlled trial.

artículo científico publicado en 2011

Low-shrinkage composite for dental application.

artículo científico publicado en 2007

Maturation of restorative glass ionomers with simplified application procedure

artículo científico publicado en 2018

Micromechanical properties of veneer luting resins after curing through ceramics

artículo científico publicado en 2010

Polymerization kinetic calculations in dental composites: a method comparison analysis.

artículo científico publicado en 2013

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

artículo científico publicado en 2015

Polymerization kinetics of experimental bioactive composites containing bioactive glass

artículo científico publicado en 2018

Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions.

artículo científico publicado en 2014

Quantification of the amount of light passing through zirconia: the effect of material shade, thickness, and curing conditions

artículo científico publicado en 2014

Real-time curing characteristics of experimental resin composites containing amorphous calcium phosphate

scientific article published on 16 August 2018

Repair of dental resin-based composites.

artículo científico publicado en 2012

Resin composite restorative materials.

artículo científico publicado en 2011

Resin-based composite light-cured properties assessed by laboratory standards and simulated clinical conditions

artículo científico publicado en 2012

Self-etch adhesives for the bonding of orthodontic brackets: faster, stronger, safer?

artículo científico publicado en 2013

Shear Bond Strength and Microleakage of a New Self-etching/Self-adhesive Pit and Fissure Sealant.

artículo científico publicado en 2015

Shear bond strength and microleakage results for three experimental self-etching primer compositions for pit and fissure sealing.

artículo científico publicado en 2016

Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems.

artículo científico publicado en 2012

Shrinkage behavior of a resin-based composite irradiated with modern curing units.

artículo científico publicado en 2005

Spatial and cure-time distribution of dynamic-mechanical properties of a dimethacrylate nano-composite

artículo científico publicado en 2009

Sufficiency of curing in high-viscosity bulk-fill resin composites with enhanced opacity

artículo científico publicado en 2018

Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic

scientific article published on 15 June 2014

The effect of aging on the mechanical properties of nanohybrid composites based on new monomer formulations ⬇️

artículo científico publicado el 14 de marzo de 2012

The influence of curing times and light curing methods on the polymerization shrinkage stress of a shrinkage-optimized composite with hybrid-type prepolymer fillers

artículo científico publicado en 2006

The mechanical stability of nano-hybrid composites with new methacrylate monomers for matrix compositions

artículo científico publicado en 2011

Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness

artículo científico publicado en 2015

Transmitted irradiance through ceramics: effect on the mechanical properties of a luting resin cement

artículo científico publicado en 2016

Wetting behaviour of silicone- and resin-based root canal sealers

artículo científico publicado en 2013

Which Factors Influence the Shear Bond Strength of Sealant Materials?

artículo científico publicado en 2016

Lista de obras de Nicoleta Ilie

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

An in vitro study on the maturation of conventional glass ionomer cements and their interface to dentin

An in-vitro assessment of the shear bond strength of bulk-fill resin composites to permanent and deciduous teeth.

Analysis of resin tags formation in root canal dentine: a cross sectional study.

Antioxidants and Collagen-Crosslinking: Benefit on Bond Strength and Clinical Applicability

Artificial saliva contamination effects on bond strength of self-etching primers

Blue-Light Transmittance of Esthetic Monolithic CAD/CAM Materials With Respect to Their Composition, Thickness, and Curing Conditions

Bulk fill restoratives: to cap or not to cap--that is the question?

Can CQ be completely replaced by alternative initiators in dental adhesives?

Comparative Effect of Self- or Dual-Curing on Polymerization Kinetics and Mechanical Properties in a Novel, Dental-Resin-Based Composite with Alkaline Filler. Running Title: Resin-Composites with Alkaline Fillers.

Comparison of biogenerically reconstructed and waxed-up complete occlusal surfaces with respect to the original tooth morphology

Curing behavior of a nanocomposite as a function of polymerization procedure.

Curing behaviour of high-viscosity bulk-fill composites

Curing efficiency of modern LED units.

Degree of conversion of nano-hybrid resin-based composites with novel and conventional matrix formulation.

Dentin Bond Strength of Experimental Composites Containing Bioactive Glass: Changes During Aging for up to 1 Year

Dentin infiltration ability of different classes of adhesive systems ⬇️

Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation

Determination of homologous distributions of bisEMA dimethacrylates in bulk-fill resin-composites by GC-MS

Does a reduction of polymerization time and bonding steps affect the bond strength of brackets?

Effect of curing mode on the micro-mechanical properties of dual-cured self-adhesive resin cements

Effect of different curing protocols on the mechanical properties of low-viscosity bulk-fill composites

Effect of gloss and heat on the mechanical behaviour of a glass carbomer cement.

Effect of modulated irradiation time on the degree of conversion and the amount of elutable substances from nano-hybrid resin-based composites

Effect of ozone gas application on the mechanical properties of dental adhesives bonded to dentin.

Effect of polymerisation and ageing on the incremental bond strength of ormocer-based dental materials

Effect of radical amplified photopolymerization (RAP) in resin-based composites.

Effect of sonic-activated resin composites on the repair of aged substrates: an in vitro investigation.

Effect of storage medium and aging duration on mechanical properties of self-adhesive resin-based cements.

Effectiveness of ozone against periodontal pathogenic microorganisms

Effects of aging and irradiation time on the properties of a highly translucent resin-based composite

Effects of ceramic shade and thickness on the micro-mechanical properties of a light-cured resin cement in different shades

Effects of exposure time and exposure distance on the degree of cure in light-activated pit and fissure sealants

Efficacy of Modern Light Curing Units in Polymerizing Peripheral Zones in Simulated Large Bulk-fill Resin-composite Fillings

Efficacy of four preventive measures against enamel demineralization at the bracket periphery-comparison of microhardness and confocal laser microscopy analysis.

Efficiency of different repair kits on bonding to aged dental resin composite substrates

Erratum: Ilie, N. Comparative Effect of Self- or Dual-Curing on Polymerization Kinetics and Mechanical Properties in a Novel, Dental-Resin-Based Composite with Alkaline Filler. Running Title: Resin-Composites with Alkaline Fillers. <i>Materials</i>

Evaluation of a conventional glass ionomer cement with new zinc formulation: effect of coating, aging and storage agents

Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage

Evaluation of modern bioactive restoratives for bulk-fill placement.

Evaluation of the mechanical properties of dental adhesives and glass-ionomer cements

Fracture and viscoelastic behavior of novel self-adhesive materials for simplified restoration concepts

Fracture toughness of dental restorative materials ⬇️

How to repair fillings made by silorane-based composites

Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites

In vitro comparison of mechanical properties and degree of cure of a self-adhesive and four novel flowable composites.

In vitro comparison of mechanical properties and degree of cure of bulk fill composites.

In vitro comparison of polymerisation kinetics and the micro-mechanical properties of low and high viscosity giomers and RBC materials.

Influence of ceramic thickness and type on micromechanical properties of light-cured adhesive bonding agents.

Influence of ozone on the composite-to-composite bond

Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites.

Investigation of different bleaching conditions on the amount of elutable substances from nano-hybrid composites

Investigation of shear-peel bond strength of orthodontic brackets on enamel after using Pro Seal

Investigations on a methacrylate-based flowable composite based on the SDR™ technology

Investigations on mechanical behaviour of dental composites.

Investigations towards nano-hybrid resin-based composites ⬇️

Is the soft-start polymerisation concept still relevant for modern curing units?

Laboratory mechanical parameters of composite resins and their relation to fractures and wear in clinical trials-A systematic review.

Light curing through glass ceramics: effect of curing mode on micromechanical properties of dual-curing resin cements

Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites.

Long-Term Stability of a RAFT-Modified Bulk-Fill Resin-Composite under Clinically Relevant Versus ISO-Curing Conditions

Long-term effectiveness of four pulpotomy techniques: 3-year randomised controlled trial.

Low-shrinkage composite for dental application.

Maturation of restorative glass ionomers with simplified application procedure

Micromechanical properties of veneer luting resins after curing through ceramics

Polymerization kinetic calculations in dental composites: a method comparison analysis.

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

Polymerization kinetics of experimental bioactive composites containing bioactive glass

Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions.

Quantification of the amount of light passing through zirconia: the effect of material shade, thickness, and curing conditions

Real-time curing characteristics of experimental resin composites containing amorphous calcium phosphate

Repair of dental resin-based composites.

Resin composite restorative materials.

Resin-based composite light-cured properties assessed by laboratory standards and simulated clinical conditions

Self-etch adhesives for the bonding of orthodontic brackets: faster, stronger, safer?

Shear Bond Strength and Microleakage of a New Self-etching/Self-adhesive Pit and Fissure Sealant.

Shear bond strength and microleakage results for three experimental self-etching primer compositions for pit and fissure sealing.

Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems.