Filtros de búsqueda

Lista de obras de Gert Heinrich

A Multioptimization Approach to Assessment of Drug Delivery of PLGA Nanoparticles: Simultaneous Control of Particle Size and Release Behavior

artículo científico publicado en 2015

A New Route to Highly Stretchable and Soft Inorganic-Organic Hybrid Elastomers Using Polydimethylsiloxane as Crosslinker of Epoxidized Natural Rubber

artículo científico publicado en 2021

A New Way of Toughening of Thermoset by Dual-Cured Thermoplastic/Thermosetting Blend

A Nonequilibrium Model for Particle Networking/Jamming and Time-Dependent Dynamic Rheology of Filled Polymers

scientific article published on 10 January 2020

A Novel Thermotropic Elastomer based on Highly-filled LDH-SSB Composites

A general approach to rubber–montmorillonite nanocomposites: Intercalation of stearic acid

article published in 2011

A highly stretchable gel-polymer electrolyte for lithium-sulfur batteries

A model for the stress tensor in dilute suspensions of rigid spheroids in a generalized Newtonian fluid

artículo científico publicado en 2019

A morphological study on the dispersion and selective localization behavior of graphene nanoplatelets in immiscible polymer blends of PC and SAN

A new approach to reducing the flammability of layered double hydroxide (LDH)-based polymer composites: preparation and characterization of dye structure-intercalated LDH and its effect on the flammability of polypropylene-grafted maleic anhydride/d

artículo científico publicado el 3 de septiembre de 2013

A new versatile synthesis of 4-substituted diaminopyridine derivatives

article published in 2012

A noble additive cum compatibilizer for dispersion of nanoclay into ethylene octene elastomer

A single glass fiber with ultrathin layer of carbon nanotube networks beneficial to in-situ monitoring of polymer properties in composite interphases

artículo científico publicado en 2014

Adjusting the mechanical behavior of embroidered scaffolds to lapin anterior cruciate ligaments by varying the thread materials

Advanced elastomer nano-composites based on CNT-hybrid filler systems

artículo científico publicado en 2009

Advances in layered double hydroxide (LDH)-based elastomer composites

Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by weibull distribution function

artículo científico publicado en 2009

An electrochemical method for the synthesis of few layer graphene sheets for high temperature applications

artículo científico publicado en 2014

Analysis of agglomerate dispersion mechanisms of multiwalled carbon nanotubes during melt mixing in polycarbonate

scientific article from 2010

Analytic theory of the adsorption-desorption transition of Gaussian polymers interacting with a periodic lattice of adsorbing centers

scientific article published on 01 August 2008

Anisotropic and heterogeneous dynamics in stretched elastomer nanocomposites

scientific article published on 01 May 2019

Applications of Variable-Axial Fibre Designs in Lightweight Fibre Reinforced Polymers

artículo científico publicado en 2015

Arrangement of layered double hydroxide in a polyethylene matrix studied by a combination of complementary methods

Benefits of hybrid nano-filler networking between organically modified Montmorillonite and carbon nanotubes in natural rubber: Experiments and theoretical interpretations

artículo científico publicado en 2017

Bethe-Peierls approximation for linear monodisperse polymers re-examined ⬇️

artículo científico publicado el 22 de septiembre de 2011

Blending In Situ Polyurethane-Urea with Different Kinds of Rubber: Performance and Compatibility Aspects

artículo científico publicado en 2018

Bottom up surrogate based approach for stochastic frequency response analysis of laminated composite plates

artículo científico publicado en 2016

Bubble rubbing on solid surface: experimental study.

artículo científico publicado en 2013

Carbon nanotubes-filled thermoplastic polyurethane-urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

Characterization of the relaxation behavior of embroidered scaffolds for tissue engineering of the anterior cruciate ligament

artículo científico publicado en 2014

Chemical reactions between poly(carbonate) and poly(vinyl amine) thermally induced by a high magnetic field pulse

Comment on "Monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber".

artículo científico publicado en 2017

Comparative study of the synergistic effect of binary and ternary LDH with intumescent flame retardant on the properties of polypropylene composites

artículo científico publicado en 2015

Comparison of tensile, thermal, and thermo-mechanical properties of polyester filaments having different cross-sectional shape

artículo científico

Comparisons Among Electrical and Rheological Properties of Melt-Mixed Composites Containing Various Carbon Nanostructures

Conductive Polymer for Elevated Temperature Applications Based on Sodium Sulfosuccinate Coupled Poly(ethylene glycol)s

artículo científico

Construction of an interconnected nanostructured carbon black network: development of highly stretchable and robust elastomeric conductors

artículo científico publicado en 2015

Contribution of physico-chemical properties of interfaces on dispersibility, adhesion and flocculation of filler particles in rubber

article by Klaus W. Stöckelhuber et al published April 2010 in Polymer

Correction: Nano-scale morphological analysis of graphene–rubber composites using 3D transmission electron microscopy

scholarly article in RSC Advances, vol. 4 no. 101, 2014

Coupling activity of ionic liquids between diene elastomers and multi-walled carbon nanotubes

scholarly article in Carbon, vol. 47 no. 14, November 2009

Crack propagation in rubber-like materials

artículo científico publicado en 2005

Critical Strains for Lamellae Deformation and Cavitation during Uniaxial Stretching of Annealed Isotactic Polypropylene

artículo científico publicado en 2018

Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: a review

artículo científico publicado en 2013

Design and properties of high-performance polyamide 6/fluoroelastomer blends by electron-induced reactive processing

artículo científico publicado en 2016

Development of SBR-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer

article

Development of a Highly Stressed Bladed Rotor Made of a CFRP Using the Tailored Fiber Placement Technology

artículo científico publicado en 2013

Development of conducting polychloroprene rubber using imidazolium based ionic liquid modified multi-walled carbon nanotubes

article

Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties

article

Development of high performance rubber composites from alkoxide-based silica and solution styrene-butadiene rubber

artículo científico publicado en 2017

Development of nitrile butadiene rubber–nanoclay composites with epoxidized natural rubber as compatibilizer

article

Dielectric Properties of Nanocomposites Based on Polyethylene and Layered Double Hydroxide

artículo científico publicado en 2009

Diffusion chamber system for testing of collagen-based cell migration barriers for separation of ligament enthesis zones in tissue-engineered ACL constructs

artículo científico publicado en 2015

Dispersion and distribution of carbon nanotubes in ternary rubber blends

Dispersion of graphite nanoplates in melt mixed PC/SAN polymer blends and its influence on rheological and electrical properties

artículo científico publicado en 2020

Dry-Jet Wet Spinning of Thermally Stable Lignin-Textile Grade Polyacrylonitrile Fibers Regenerated from Chloride-Based Ionic Liquids Compounds

artículo científico publicado en 2020

Dynamic behavior of short aramid fiber-filled elastomer composites

artículo científico publicado en 2014

Effect of Non-Rubber Components of NR on the Carbon Nanotube (CNT) Localization in SBR/NR Blends

article published in 2013

Effect of Prestrain on the Actuation Characteristics of Dielectric Elastomers

artículo científico publicado en 2020

Effect of Vulcanization Ingredients on the Intercalation-Exfoliation Process of Layered Silicate in an Acrylonitrile Butadiene Rubber Matrix

Effect of different ionic liquids on the dispersion and phase selective wetting of carbon nanotubes in rubber blends

Effect of ionic liquid on dielectric, mechanical and dynamic mechanical properties of multi-walled carbon nanotubes/polychloroprene rubber composites

Effect of phosphorus-containing inorganicā€“organic hybrid coating on the flammability of cotton fabrics: Synthesis, characterization and flammability

artículo científico publicado en 2016

Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends

Effect of silane integrated sol-gel derivedin situsilica on the properties of nitrile rubber

article published in 2014

Effect of sol–gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

article published in 2012

Elastomer composites based on carbon nanotubes and ionic liquid

artículo científico publicado en 2013

Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, mechanical properties and interfacial adhesion

artículo científico publicado en 2008

Elastomeric microwell-based triboelectric nanogenerators by in situ simultaneous transfer-printing

artículo científico publicado en 2022

Electrical Conductive Surface Functionalization of Polycarbonate Parts with CNT Composite Films during Injection Molding

Electrical and melt rheological characterization of PC and co-continuous PC/SAN blends filled with CNTs: Relationship between melt-mixing parameters, filler dispersion, and filler aspect ratio

Electrically conductive and piezoresistive polymer nanocomposites using multiwalled carbon nanotubes in a flexible copolyester: Spectroscopic, morphological, mechanical and electrical properties

artículo científico publicado en 2022

Electromagnetic interference shielding effectiveness of MWCNT filled poly(ether sulfone) and poly(ether imide) nanocomposites

scholarly article in Polymer Engineering and Science, vol. 54 no. 11, November 2013

Electron-induced reactive processing of polyamide 6/polypropylene blends: Morphology and properties

scientific article from 2018

Electrostatic Discharging Behaviour of Polycarbonate Parts Made by Process-Integrated Surface Modification

artículo científico

Embroidered polymer-collagen hybrid scaffold variants for ligament tissue engineering

artículo científico publicado en 2014

Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

artículo científico publicado en 2018

Evidence for an in Situ Developed Polymer Phase in Ionic Elastomers

Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites

scholarly article by Subramani Bhagavatheswaran Eshwaran et al published October 2014 in Journal of Applied Polymer Science

Exploring the synergistic effect of short jute fiber and nanoclay on the mechanical, dynamic mechanical and thermal properties of natural rubber composites

Filler Wetting in Miscible ESBR/SSBR Blends and Its Effect on Mechanical Properties

Filler flocculation in polymers - a simplified model derived from thermodynamics and game theory.

artículo científico publicado en 2017

Fine tuning of the dynamic mechanical properties of natural rubber/carbon nanotube nanocomposites by organically modified montmorillonite: A first step in obtaining high-performance damping material suitable for seismic application

artículo científico publicado en 2015

Fire-safe and environmentally friendly nanocomposites based on layered double hydroxides and ethylene propylene diene elastomer

scholarly article in RSC Advances, vol. 6 no. 31, 2016

First‐Time Investigations on Cavitation in Rubber Parts Subjected to Constrained Tension Using In Situ Synchrotron X‐Ray Microtomography (SRμCT)

artículo científico publicado en 2021

Flory radius of polymers in a periodic field: an exact analytic theory

artículo científico publicado en 2007

Formation and stability of carbon nanotube network in natural rubber: Effect of non-rubber components

Fracture surface statistics of filled elastomers

artículo científico publicado en 2009

Friction, Abrasion and Crack Growth Behavior of In-Situ and Ex-Situ Silica Filled Rubber Composites

scientific article published on 07 January 2020

From Layered Double Hydroxides to Layered Double Hydroxide-Based Nanocomposites—A Solid-State NMR Study

Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites

artículo científico publicado en 2010

Gold nanoparticle layers from multi-step adsorption immobilised on a polymer surface during injection molding

article by Felix Kroschwald et al published 21 March 2016 in Journal of Applied Polymer Science

Hierarchically structured nerve guidance channels based on poly-3-hydroxybutyrate enhance oriented axonal outgrowth

artículo científico publicado en 2014

High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications

artículo científico publicado en 2018

Highly Exfoliated Natural Rubber/Clay Composites by “Propping-Open Procedure”: The Influence of Fatty-Acid Chain Length on Exfoliation

Highly reinforced blends of nitrile butadiene rubber and in-situ synthesized polyurethane-urea

artículo científico

Immobilisation of different surface-modified silica nanoparticles on polymer surfaces via melt processing

Immobilization of gold nanoparticles on a polycarbonate surface layer during molding

scientific article from 2011

Impact of Filler Surface Modification on Large Scale Mechanics of Styrene Butadiene/ Silica Rubber Composites

artículo científico publicado en 2011

Improved oxidation resistance of conducting polychloroprene composites

Improvement of mechanical performance of solution styrene butadiene rubber by controlling the concentration and the size of in situ derived sol–gel silica particles

scholarly article in RSC Advances, vol. 6 no. 40, 2016

In Situ Polymorphic Alteration of Filler Structures for Biomimetic Mechanically Adaptive Elastomer Nanocomposites.

artículo científico publicado en 2018

Influence of Controlled Epoxidation of an Asymmetric Styrene/Butadiene Star Block Copolymer on Structural and Mechanical Properties

artículo científico publicado en 2020

Influence of Electron Induced Reactive Processing and Secondary Rubber Phase on Spinnability of Polypropylene and Polypropylene/Rubber Blends

artículo científico publicado en 2018

Influence of Layered Double Hydroxides on the Curing of Carboxylated Nitrile Rubber with Zinc Oxide

Influence of Layered Silicate on the Self-Crosslinking of Polychloroprene and Carboxylated Nitrile Rubber

Influence of a cyclic butylene terephthalate oligomer on the processability and thermoelectric properties of polycarbonate/MWCNT nanocomposites

Influence of ionic liquids on the dielectric relaxation behavior of CNT based elastomer nanocomposites

Influence of the MWCNT surface functionalization on the thermoelectric properties of melt-mixed polycarbonate composites

article by Marco Liebscher et al published September 2014 in Composites Science and Technology

Influence of the viscosity ratio in PC/SAN blends filled with MWCNTs on the morphological, electrical, and melt rheological properties

Influence of weak reversible cross-linkers on entangled polymer melt dynamics

scientific article published on 01 June 2018

Influence of “expanded clay” on the microstructure and fatigue crack growth behavior of carbon black filled NR composites

article

Influences of polymer matrix melt viscosity and molecular weight on MWCNT agglomerate dispersion

article published in 2011

Intercalation of Mg–Al layered double hydroxide by anionic surfactants: Preparation and characterization

artículo científico publicado en 2008

Ionic Modification Turns Commercial Rubber into a Self-Healing Material

artículo científico publicado en 2015

Kinetics of filler wetting and dispersion in carbon nanotube/rubber composites

scholarly article in Carbon, vol. 50 no. 12, October 2012

Kinetics of strain-induced crystallization in natural rubber studied by WAXD: Dynamic and impact tensile experiments

artículo científico publicado en 2012

LDPE/Mg–Al layered double hydroxide nanocomposite: Thermal and flammability properties

artículo científico publicado en 2007

Layered Double Hydroxides (LDH): A Multifunctional Versatile System for Nanocomposites

Light-induced deformation of azobenzene elastomers: a regular cubic network model

scientific article published on 17 January 2012

Location of dispersing agent in rubber nanocomposites during mixing process

article published in 2013

Long-term hydrolytic degradation study on polymer-based embroidered scaffolds for ligament tissue engineering

artículo científico publicado en 2018

Magneto-sensitive Elastomers in a Homogeneous Magnetic Field: A Regular Rectangular Lattice Model

artículo científico

Mechanical Design of Intersection Points of Tailored Fiber Placement Made Carbon Fiber Reinforced Plastic Truss-Like Structures

artículo científico publicado en 2019

Mechanical properties of magneto-sensitive elastomers: unification of the continuum-mechanics and microscopic theoretical approaches

artículo científico publicado en 2014

Meso-scaled finite element analysis of fiber reinforced plastics made by Tailored Fiber Placement

artículo científico publicado en 2016

Method for Simultaneously improving the thermal stability and mechanical properties of poly(lactic acid): effect of high-energy electrons on the morphological, mechanical, and thermal properties of PLA/MMT nanocomposites

artículo científico publicado en 2012

Microscopic theory of light-induced deformation in amorphous side-chain azobenzene polymers

artículo científico publicado en 2009

Modeling of dynamic-mechanical behavior of reinforced elastomers using a multiscale approach

artículo científico publicado en 2016

Modified and unmodified multiwalled carbon nanotubes in high performance solution-styrene-butadiene and butadiene rubber blends

Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites

artículo científico publicado en 2006

Multiscale Approach to Dynamic-Mechanical Analysis of Unfilled Rubbers

artículo científico publicado en 2014

Nano-scale morphological analysis of graphene-rubber composites using 3D transmission electron microscopy

article

Nanoalloy Based on Clays: Intercalated‐Exfoliated Layered Silicate in High Performance Elastomer

artículo científico publicado en 2007

Nanocomposites based on chloroprene rubber: Effect of chemical nature and organic modification of nanoclay on the vulcanizate properties

article

Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization

artículo científico publicado en 2005

Networking of ionic liquid modified CNTs in SSBR

New insights into rubber network structure by a combination of experimental techniques

artículo científico publicado en 2017

New reactive poly(ionic liquid)s synthesized by polymer analogous conversion of maleic anhydride containing polymers

article published in 2016

Nondestructive Molecular Characterization of Polycarbonate-Polyvinylamine Composites after Thermally Induced Aminolysis

artículo científico

Novel thermoplastic vulcanizates (TPVs) based on silicone rubber and polyamide exploring peroxide cross-linking

artículo científico publicado en 2014

Novel thermosensitive hydrogel composites based on poly(d,l-lactide-co-glycolide) nanoparticles embedded in poly(n-isopropyl acrylamide) with sustained drug-release behavior

On the morphology and structure formation of carbon fibers from polymer precursor systems

artículo científico publicado en 2018

One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method

artículo científico publicado en 2009

Online Structural-Health Monitoring of Glass Fiber-Reinforced Thermoplastics Using Different Carbon Allotropes in the Interphase

scientific article published on 25 June 2018

Optimizing Variable-Axial Fiber-Reinforced Composite Laminates: The Direct Fiber Path Optimization Concept

scientific article from 2019

Piezoresistive natural rubber-multiwall carbon nanotube nanocomposite for sensor applications

Poly(acrylonitrile-co-butadiene) as polymeric crosslinking accelerator for sulphur network formation

scientific article published on 26 August 2020

Polymer/carbon nanotube composites for liquid sensing: Model for electrical response characteristics

article

Polymer/carbon nanotube composites for liquid sensing: Selectivity against different solvents

article published in 2012

Polymere Nanokomposite mit anorganischen Funktionsfüllstoffen

Potential theory of the depletion interaction in the colloid-polymer mixtures

artículo científico publicado en 2009

Pre-intercalation of long chain fatty acid in the interlayer space of layered silicates and preparation of montmorillonite/natural rubber nanocomposites

Preintercalation of an organic accelerator into nanogalleries and preparation of ethylene propylene diene terpolymer rubber–clay nanocomposites

article

Preparation and Rheological Characterization of Polymer Nanocomposites Based on Expanded Graphite

Preparation and burning behaviors of flame retarding biodegradable poly(lactic acid) nanocomposite based on zinc aluminum layered double hydroxide

artículo científico publicado en 2010

Preparation and properties of nanocomposites based on PS-b-(PS/PB)-b-PS triblock copolymer by controlling the size of silica nanoparticles with electron beam irradiation

Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes

Preparation of melt-spun antimicrobially modified LDH/polyolefin nanocomposite fibers

artículo científico publicado en 2014

Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler

Process development for the manufacture of fiber reinforced wood composites (FRWC)

artículo científico publicado en 2018

Processing and Properties of Nanocomposites Based on Layered Silicate and Carboxylated Nitrile Rubber

Rates of the colloid coagulation in the presence of irreversibly adsorbing and non-adsorbing polymers

Reinforced chloroprene rubber by in situ generated silica particles: Evidence of bound rubber on the silica surface

article

Reinforcement and migration of nanoclay in polychloroprene/ethylene–propylene–diene-monomer rubber blends

Reinforcement of Solution Styrene Butadiene Rubber by Silane Functionalized Halloysite Nanotubes

artículo científico publicado en 2013

Relationship between Structure and Mechanical Properties of Melt Processable PTFE: Influence of Molecular Weight and Comonomer Content

artículo científico publicado en 2012

Relaxation dynamics of carboxylated nitrile rubber filled with organomodified nanoclay

article

Revisiting Segmental Order: A Simplified Approach for Sulfur-Cured Rubbers Considering Junction Fluctuations and Entanglements

artículo científico publicado en 2018

Robust Triboelectric Generators by All-In-One Commercial Rubbers

artículo científico publicado en 2020

Routes to Rubber Nanocomposites

Rubber composites based on graphene nanoplatelets, expanded graphite, carbon nanotubes and their combination: A comparative study

Rubber composites based on silane-treated stöber silica and nitrile rubber

Rubber contact mechanics: adhesion, friction and leakage of seals.

artículo científico publicado en 2017

Rubber curing chemistry governing the orientation of layered silicate

Rubber–Clay Nanocomposites: Some Recent Results

artículo científico publicado en 2010

Selective wetting of carbon nanotubes in rubber compounds – Effect of the ionic liquid as dispersing and coupling agent

Shape-Dependent Localization of Carbon Nanotubes and Carbon Black in an Immiscible Polymer Blend during Melt Mixing

Silica‐Ethylene Propylene Diene Monomer Rubber Networking by In Situ Sol‐Gel Method

artículo científico publicado en 2007

Single MWNT-glass fiber as strain sensor and switch

artículo científico publicado en 2011

Spatial statistics of carbon nanotube polymer composites

Stearate Modified Zinc-Aluminum Layered Double Hydroxides and Acrylonitrile Butadiene Rubber Nanocomposites

scholarly article by Eshwaran Subramani Bhagavatheswaran et al published 2 January 2014 in Polymer-Plastics Technology and Engineering

Strain sensing, electrical and mechanical properties of polycarbonate/multiwall carbon nanotube monofilament fibers fabricated by melt spinning

scientific article from January 2016

Strain-induced crystallization around a crack tip in natural rubber under dynamic load

artículo científico publicado en 2013

Strong Strain Sensing Performance of Natural Rubber Nanocomposites

artículo científico publicado en 2017

Structural characteristics and flammability of fire retarding EPDM/layered double hydroxide (LDH) nanocomposites

scholarly article in RSC Advances, vol. 2 no. 9, 2012

Structure-Property Relationships of Nanocomposites Based on Polypropylene and Layered Double Hydroxides

Super thermoplastic vulcanizates based on carboxylated acrylonitrile butadiene rubber (XNBR) and polyamide (PA12)

Superposition approach to the dynamic-mechanical behaviour of reinforced rubbers

artículo científico publicado en 2017

Synthesis of Organo Cobalt−Aluminum Layered Double Hydroxide via a Novel Single-Step Self-Assembling Method and Its Use as Flame Retardant Nanofiller in PP

scholarly article by De-Yi Wang et al published 7 September 2010 in Langmuir

Temperature Scanning Stress Relaxation of an Autonomous Self-Healing Elastomer Containing Non-Covalent Reversible Network Junctions

scientific article published on 19 January 2018

Temperature-Dependent Reinforcement of Hydrophilic Rubber Using Ice Crystals

scientific article published on 02 February 2017

The effect of surface roughness and viscoelasticity on rubber adhesion.

artículo científico publicado en 2017

The kinetics of CNT transfer between immiscible blend phases during melt mixing

The retardation effects of lamellar slip or/and chain slip on void initiation during uniaxial stretching of oriented iPP

artículo científico publicado en 2021

The role of linked phospholipids in the rubber-filler interaction in carbon nanotube (CNT) filled natural rubber (NR) composites

Theory of light-induced deformation of azobenzene elastomers: influence of network structure

artículo científico publicado en 2012

Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co–Al layered double hydroxide

Thermokinetic analysis of two-step curing reactions in melt

artículo científico publicado en 2007

Thermokinetic analysis of two-step curing reactions in melt: Part II. Investigation of polymeric model systems

artículo científico publicado en 2010

Time and temperature dependent piezoresistive behavior of conductive elastomeric composites

scientific article from 2018

Time resolved characterization of the solid-state reaction between polycarbonate and primary amine

artículo científico publicado en 2018

Tribology of thin wetting films between bubble and moving solid surface.

artículo científico publicado en 2013

Triggering the Self-Healing Properties of Modified Bromobutyl Rubber by Intrinsically Electrical Heating

artículo científico

Tube-like natural halloysite/fluoroelastomer nanocomposites with simultaneous enhanced mechanical, dynamic mechanical and thermal properties

Tuning the Properties and Self-Healing Behavior of Ionically Modified Poly(isobutylene-co-isoprene) Rubber

Uncertain natural frequency analysis of composite plates including effect of noise - A polynomial neural network approach

artículo científico publicado en 2016

Understanding the reinforcing behavior of expanded clay particles in natural rubber compounds

article published in 2013

Unmodified LDH as reinforcing filler for XNBR and the development of flame-retardant elastomer composites

artículo científico publicado en 2014

Unusual low temperature relaxation behavior of crosslinked acrylonitrile-butadiene co-polymer

artículo científico publicado en 2021

Using tailored fibre placement technology for stress adapted design of composite structures

artículo científico publicado en 2013

Utilization of Agrowaste Polymers in PVC/NBR Alloys: Tensile, Thermal, and Morphological Properties

article published in 2012

Variable structural colouration of composite interphases

artículo científico publicado en 2017

Viscoelastic Behavior of Embroidered Scaffolds for ACL Tissue Engineering Made of PLA and P(LA-CL) After In Vitro Degradation

scientific article published on 19 September 2019

Viscoelastic and self-healing behavior of silica filled ionically modified poly(isobutylene-co-isoprene) rubber

scholarly article in RSC Advances, vol. 8 no. 47, 2018

Water Vapor Sensing by Carbon Nanoparticle "Skin"

scientific article from 2015

Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures

scientific article from 2019

XPCS Investigation of the Dynamics of Filler Particles in Stretched Filled Elastomers

artículo científico publicado en 2012

‘Expanded organoclay’ assisted dispersion and simultaneous structural alterations of multiwall carbon nanotube (MWCNT) clusters in natural rubber

article published in 2015

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda