Lista de obras - J Frenzel - Dominio Público Uruguay

A Kinetic Study on the Evolution of Martensitic Transformation Behavior and Microstructures in Ti–Ta High-Temperature Shape-Memory Alloys During Aging

artículo científico publicado en 2018

Bioactivity and electrochemical behavior of hydroxyapatite-silicon-multi walled carbon nano-tubes composite coatings synthesized by EPD on NiTi alloys in simulated body fluid

artículo científico publicado en 2016

Characterization of mechanical properties of hydroxyapatite-silicon-multi walled carbon nano tubes composite coatings synthesized by EPD on NiTi alloys for biomedical application

artículo científico publicado en 2016

Chemical complexity, microstructure and martensitic transformation in high entropy shape memory alloys

artículo científico publicado en 2020

Cyclic degradation of titanium–tantalum high-temperature shape memory alloys — the role of dislocation activity and chemical decomposition

artículo científico publicado en 2015

Design of a Medical Non-Linear Drilling Device: The Influence of Twist and Wear on the Fatigue Behaviour of NiTi Wires Subjected to Bending Rotation

article

Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements

article

Discovery of ω -free high-temperature Ti-Ta- X shape memory alloys from first-principles calculations

artículo científico publicado en 2019

Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling

Effect of off-stoichiometric compositions on microstructures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys

artículo científico publicado en 2021

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation

artículo científico publicado en 2016

Experimental and theoretical investigation on phase formation and mechanical properties in Cr-Co-Ni alloys processed using a novel thin-film quenching technique

scientific article published on 14 April 2020

Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

article

Grain Nucleation and Growth in Deformed NiTi Shape Memory Alloys: An In Situ TEM Study

artículo científico publicado en 2017

Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load

High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles

High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices

artículo científico publicado en 2018

High-temperature and low-stress creep anisotropy of single-crystal superalloys

artículo científico publicado en 2013

Identification of Quaternary Shape Memory Alloys with Near-Zero Thermal Hysteresis and Unprecedented Functional Stability

Identification of a ternary μ-phase in the Co-Ti-W system – An advanced correlative thin-film and bulk combinatorial materials investigation

Impact of Heating–Cooling Rates on the Functional Properties of Ti–20Ta–5Al High-Temperature Shape Memory Alloys

artículo científico publicado en 2019

Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys

article

Influence of Ni on martensitic phase transformations in NiTi shape memory alloys

Ingot metallurgy and microstructural characterization of Ti–Ta alloys

artículo científico publicado en 2014

Investigation of ternary subsystems of superalloys by thin-film combinatorial synthesis and high-throughput analysis

Investigation of the Thin-Film Phase Diagram of the Cr-Ni-Re System by High-Throughput Experimentation

Microstructural evolution and functional fatigue of a Ti–25Ta high-temperature shape memory alloy

article

Microstructural evolution in a Ti – Ta high-temperature shape memory alloy during creep

artículo científico publicado en 2015

Microstructure, Shape Memory Effect and Functional Stability of Ti67Ta33Thin Films

Nano- and Microcrystal Investigations of Precipitates, Interfaces and Strain Fields in Ni-Ti-Nb by Various TEM Techniques

artículo científico publicado en 2013

Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy

article

Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition

artículo científico publicado en 2016

Ni-base superalloy single crystal (SX) mosaicity characterized by the Rotation Vector Base Line Electron Back Scatter Diffraction (RVB-EBSD) method

scientific article published on 22 July 2019

On the Oxidation Behavior and Its Influence on the Martensitic Transformation of Ti–Ta High-Temperature Shape Memory Alloys

scholarly article

On the effect of alloy composition on martensite start temperatures and latent heats in Ni–Ti-based shape memory alloys

article

Orientation-Dependent Deformation Behavior of 316L Steel Manufactured by Laser Metal Deposition and Casting under Local Scratch and Indentation Load

artículo científico publicado en 2020

Path to single-crystalline repair and manufacture of Ni-based superalloy using directional annealing

artículo científico publicado en 2021

Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading

article by M.L. Young et al published April 2010 in Acta Materialia

Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures

Preparing hydroxyapatite-silicon composite suspensions with homogeneous distribution of multi-walled carbon nano-tubes for electrophoretic coating of NiTi bone implant and their effect on the surface morphology

artículo científico publicado en 2016

Processing of a single-crystalline CrCoNi medium-entropy alloy and evolution of its thermal expansion and elastic stiffness coefficients with temperature ⬇️

scholarly article

R-phase formation in Ti39Ni45Cu16 shape memory thin films and bulk alloys discovered by combinatorial methods

Reconciling Experimental and Theoretical Data in the Structural Analysis of Ti–Ta Shape-Memory Alloys

artículo científico publicado en 2018

Repair of Ni-based single-crystal superalloys using vacuum plasma spray

scholarly article

Site occupation of Nb atoms in ternary Ni–Ti–Nb shape memory alloys

artículo científico publicado en 2014

The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting.

artículo científico publicado en 2012

The effect of cast microstructure and crystallography on rafting, dislocation plasticity and creep anisotropy of single crystal Ni-base superalloys

scholarly article by P. Nörtershäuser et al published February 2015 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Three-Dimensional Cu Foam-Supported Single Crystalline Mesoporous Cu2O Nanothorn Arrays for Ultra-Highly Sensitive and Efficient Nonenzymatic Detection of Glucose

artículo científico publicado en 2015

Lista de obras de J Frenzel

A Kinetic Study on the Evolution of Martensitic Transformation Behavior and Microstructures in Ti–Ta High-Temperature Shape-Memory Alloys During Aging

Bioactivity and electrochemical behavior of hydroxyapatite-silicon-multi walled carbon nano-tubes composite coatings synthesized by EPD on NiTi alloys in simulated body fluid

Characterization of mechanical properties of hydroxyapatite-silicon-multi walled carbon nano tubes composite coatings synthesized by EPD on NiTi alloys for biomedical application

Chemical complexity, microstructure and martensitic transformation in high entropy shape memory alloys

Cyclic degradation of titanium–tantalum high-temperature shape memory alloys — the role of dislocation activity and chemical decomposition

Design of a Medical Non-Linear Drilling Device: The Influence of Twist and Wear on the Fatigue Behaviour of NiTi Wires Subjected to Bending Rotation

Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements

Discovery of ω -free high-temperature Ti-Ta- X shape memory alloys from first-principles calculations

Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling

Effect of off-stoichiometric compositions on microstructures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation

Experimental and theoretical investigation on phase formation and mechanical properties in Cr-Co-Ni alloys processed using a novel thin-film quenching technique

Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

Grain Nucleation and Growth in Deformed NiTi Shape Memory Alloys: An In Situ TEM Study

Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load

High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles

High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices

High-temperature and low-stress creep anisotropy of single-crystal superalloys

Identification of Quaternary Shape Memory Alloys with Near-Zero Thermal Hysteresis and Unprecedented Functional Stability

Identification of a ternary μ-phase in the Co-Ti-W system – An advanced correlative thin-film and bulk combinatorial materials investigation

Impact of Heating–Cooling Rates on the Functional Properties of Ti–20Ta–5Al High-Temperature Shape Memory Alloys

Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys

Influence of Ni on martensitic phase transformations in NiTi shape memory alloys

Ingot metallurgy and microstructural characterization of Ti–Ta alloys

Investigation of ternary subsystems of superalloys by thin-film combinatorial synthesis and high-throughput analysis

Investigation of the Thin-Film Phase Diagram of the Cr-Ni-Re System by High-Throughput Experimentation

Microstructural evolution and functional fatigue of a Ti–25Ta high-temperature shape memory alloy

Microstructural evolution in a Ti – Ta high-temperature shape memory alloy during creep

Microstructure, Shape Memory Effect and Functional Stability of Ti67Ta33Thin Films

Nano- and Microcrystal Investigations of Precipitates, Interfaces and Strain Fields in Ni-Ti-Nb by Various TEM Techniques

Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy

Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition

Ni-base superalloy single crystal (SX) mosaicity characterized by the Rotation Vector Base Line Electron Back Scatter Diffraction (RVB-EBSD) method

On the Oxidation Behavior and Its Influence on the Martensitic Transformation of Ti–Ta High-Temperature Shape Memory Alloys

On the effect of alloy composition on martensite start temperatures and latent heats in Ni–Ti-based shape memory alloys

Orientation-Dependent Deformation Behavior of 316L Steel Manufactured by Laser Metal Deposition and Casting under Local Scratch and Indentation Load

Path to single-crystalline repair and manufacture of Ni-based superalloy using directional annealing

Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading

Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures

Preparing hydroxyapatite-silicon composite suspensions with homogeneous distribution of multi-walled carbon nano-tubes for electrophoretic coating of NiTi bone implant and their effect on the surface morphology

Processing of a single-crystalline CrCoNi medium-entropy alloy and evolution of its thermal expansion and elastic stiffness coefficients with temperature ⬇️

R-phase formation in Ti39Ni45Cu16 shape memory thin films and bulk alloys discovered by combinatorial methods

Reconciling Experimental and Theoretical Data in the Structural Analysis of Ti–Ta Shape-Memory Alloys

Repair of Ni-based single-crystal superalloys using vacuum plasma spray

Site occupation of Nb atoms in ternary Ni–Ti–Nb shape memory alloys

The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting.

The effect of cast microstructure and crystallography on rafting, dislocation plasticity and creep anisotropy of single crystal Ni-base superalloys

Three-Dimensional Cu Foam-Supported Single Crystalline Mesoporous Cu2O Nanothorn Arrays for Ultra-Highly Sensitive and Efficient Nonenzymatic Detection of Glucose