Lista de obras - Joanna Raczkowska - Dominio Público Uruguay

"Command" surfaces with thermo-switchable antibacterial activity

artículo científico publicado en 2019

AFM/LFM surface studies of a ternary polymer blend cast on substrates covered by a self-assembled monolayer

artículo científico publicado en 2002

Adaptability of single melanoma cells to surfaces with distinct hydrophobicity and roughness

artículo científico publicado en 2018

Binding activity of patterned concanavalin A studied by atomic force microscopy

artículo científico publicado en 2005

Breath figures in polymer and polymer blend films spin-coated in dry and humid ambience.

artículo científico publicado en 2008

Cholesterol-Based Grafted Polymer Brushes as Alignment Coating with Temperature-Tuned Anchoring for Nematic Liquid Crystals.

artículo científico publicado en 2016

Composition Effects in Polymer Blends Spin-Cast on Patterned Substrates

artículo científico publicado en 2005

Compositional Mismatch between Chemical Patterns on a Substrate and Polymer Blends Yielding Spin-Cast Films with Subpattern Periodicity

artículo científico publicado en 2007

Conductivity of Thin Polymer Films Containing Polyaniline

artículo científico publicado en 2008

Dendrites and pillars in spin cast blends of polyaniline or its oligomeric analogue

artículo científico publicado en 2010

Dewetting of polymer film controlled by protein adsorption

scientific article published on 13 September 2020

Discrimination between NSIP- and IPF-Derived Fibroblasts Based on Multi-Parameter Characterization of Their Growth, Morphology and Physic-Chemical Properties

artículo científico publicado en 2022

Effect of Substrate Stiffness on Physicochemical Properties of Normal and Fibrotic Lung Fibroblasts

artículo científico publicado en 2020

Effect of poly(tert-butyl methacrylate) stereoregularity on polymer film interactions with peptides, proteins, and bacteria

artículo científico publicado en 2022

Effect of substrate elasticity on macroscopic parameters of fish keratocyte migration.

artículo científico publicado en 2016

Effect of tuned elasticity and chemical modification of substrate on fibrotic and healthy lung fibroblasts

scientific article published on 08 October 2020

Elasticity patterns induced by phase-separation in polymer blend films

artículo científico publicado en 2017

Engineering a Poly(3,4-ethylenedioxythiophene):(Polystyrene Sulfonate) Surface Using Self-Assembling Molecules-A Chemical Library Approach

artículo científico publicado en 2018

Fabrication and Impact of Fouling-Reducing Temperature-Responsive POEGMA Coatings with Embedded CaCO Nanoparticles on Different Cell Lines

artículo científico publicado en 2021

Friction force microscopy as an alternative method to probe molecular interactions.

artículo científico publicado en 2005

Glass transition in temperature-responsive poly(butyl methacrylate) grafted polymer brushes. Impact of thickness and temperature on wetting, morphology, and cell growth

artículo científico publicado en 2018

Grafted polymer brush coatings for growth of cow granulosa cells and oocyte-cumulus cell complexes

artículo científico publicado en 2020

Humidity and solvent effects in spin-coated polythiophene–polystyrene blends

artículo científico publicado en 2007

Humidity and wetting effects in spin-cast blends of insulating polymers and conducting polyaniline doped with DBSA

artículo científico publicado en 2012

Influence of humid atmosphere on phase separation in polyaniline–polystyrene thin films

artículo científico publicado en 2005

Integral geometry analysis of fluorescence micrographs for quantitative relative comparison of protein adsorption onto polymer surfaces

artículo científico publicado en 2008

Lamellar structures formed in spin-cast blends of insulating and conducting polymers

artículo científico publicado en 2004

Modification of poly(ethylene terephthalate) surface with attached dextran macromolecules

scholarly article by Yurij Stetsyshyn et al published September 2009 in Polymer International

Multilayers of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microspheres with core-shell morphology: Characterization by AFM, SIMS and XPS

artículo científico publicado en 2016

Orientation of Biotin-Binding Sites in Streptavidin Adsorbed onto the Surface of Polythiophene Films

artículo científico publicado en 2019

PDMS substrate stiffness affects the morphology and growth profiles of cancerous prostate and melanoma cells

artículo científico publicado en 2014

Pattern Formation in Thin Polymer Films Containing Conducting Polyaniline

artículo científico publicado en 2008

Pattern guided structure formation in polymer films of asymmetric blends

artículo científico publicado en 2006

Pattern replication examined with integral geometry approach: application to ion milling of polymer blend films

artículo científico publicado en 2005

Pattern replication in polyaniline–polystyrene thin films

artículo científico publicado en 2007

Patterning of cancerous cells driven by a combined modification of mechanical and chemical properties of the substrate

artículo científico publicado en 2017

Physico-chemical properties of PDMS surfaces suitable as substrates for cell cultures

artículo científico publicado en 2016

Precise positioning of cancerous cells on PDMS substrates with gradients of elasticity

artículo científico publicado en 2016

Protein coverage on silicon surfaces modified with amino-organic films: a study by AFM and angle-resolved XPS.

artículo científico publicado en 2010

Reverse contrast and substructures in protein micro-patterns on 3D polymer surfaces

artículo científico publicado en 2011

Selective protein adsorption on polymer patterns formed by self-organization and soft lithography

artículo científico publicado en 2009

Shape-Controlled synthesis of silver nanoparticles in temperature-responsive grafted polymer brushes for optical applications

Structure Evolution in Layers of Polymer Blend Nanoparticles

artículo científico publicado en 2007

Structures Formed in Spin-Cast Films of Polystyrene Blends with Poly(butyl methacrylate) Isomers

artículo científico publicado en 2004

Structures in Multicomponent Polymer Films: Their Formation, Observation and Applications in Electronics and Biotechnology

artículo científico publicado en 2009

Substrate-Determined Shape of Free Surface Profiles in Spin-Cast Polymer Blend Films

artículo científico publicado en 2003

Substructure formation during pattern transposition from substrate into polymer blend film

artículo científico publicado en 2003

Surface Patterns in Solvent-Cast Polymer Blend Films Analyzed with an Integral-Geometry Approach

artículo científico publicado en 2003

Swelling of poly(3-alkylthiophene) films exposed to solvent vapors and humidity: Evaluation of solubility parameters

artículo científico publicado en 2007

Synthesis and Postpolymerization Modification of Thermoresponsive Coatings Based on Pentaerythritol Monomethacrylate: Surface Analysis, Wettability, and Protein Adsorption.

artículo científico publicado en 2015

Temperature and pH dual-responsive POEGMA-based coatings for protein adsorption

artículo científico publicado en 2013

Temperature-Controlled Orientation of Proteins on Temperature-Responsive Grafted Polymer Brushes: Poly(butyl methacrylate) vs Poly(butyl acrylate): Morphology, Wetting, and Protein Adsorption

scientific article published on 07 May 2019

Temperature-Controlled Three-Stage Switching of Wetting, Morphology, and Protein Adsorption.

artículo científico publicado en 2017

Temperature-responsive grafted polymer brushes obtained from renewable sources with potential application as substrates for tissue engineering

scholarly article by Joanna Raczkowska et al published June 2017 in Applied Surface Science

Temperature-responsive peptide-mimetic coating based on poly(N-methacryloyl-l-leucine): Properties, protein adsorption and cell growth

artículo científico publicado en 2014

Temperature-responsive properties of poly(4-vinylpyridine) coatings: influence of temperature on the wettability, morphology, and protein adsorption

scholarly article in RSC Advances, vol. 6 no. 90, 2016

Discrimination between HCV29 and T24 by controlled proliferation of cells co-cultured on substrates with different elasticity

artículo científico publicado el 28 de agosto de 2018

Lista de obras de Joanna Raczkowska

"Command" surfaces with thermo-switchable antibacterial activity

AFM/LFM surface studies of a ternary polymer blend cast on substrates covered by a self-assembled monolayer

Adaptability of single melanoma cells to surfaces with distinct hydrophobicity and roughness

Binding activity of patterned concanavalin A studied by atomic force microscopy

Breath figures in polymer and polymer blend films spin-coated in dry and humid ambience.

Cholesterol-Based Grafted Polymer Brushes as Alignment Coating with Temperature-Tuned Anchoring for Nematic Liquid Crystals.

Composition Effects in Polymer Blends Spin-Cast on Patterned Substrates

Compositional Mismatch between Chemical Patterns on a Substrate and Polymer Blends Yielding Spin-Cast Films with Subpattern Periodicity

Conductivity of Thin Polymer Films Containing Polyaniline

Dendrites and pillars in spin cast blends of polyaniline or its oligomeric analogue

Dewetting of polymer film controlled by protein adsorption

Discrimination between NSIP- and IPF-Derived Fibroblasts Based on Multi-Parameter Characterization of Their Growth, Morphology and Physic-Chemical Properties

Effect of Substrate Stiffness on Physicochemical Properties of Normal and Fibrotic Lung Fibroblasts

Effect of poly(tert-butyl methacrylate) stereoregularity on polymer film interactions with peptides, proteins, and bacteria

Effect of substrate elasticity on macroscopic parameters of fish keratocyte migration.

Effect of tuned elasticity and chemical modification of substrate on fibrotic and healthy lung fibroblasts

Elasticity patterns induced by phase-separation in polymer blend films

Engineering a Poly(3,4-ethylenedioxythiophene):(Polystyrene Sulfonate) Surface Using Self-Assembling Molecules-A Chemical Library Approach

Fabrication and Impact of Fouling-Reducing Temperature-Responsive POEGMA Coatings with Embedded CaCO Nanoparticles on Different Cell Lines

Friction force microscopy as an alternative method to probe molecular interactions.

Glass transition in temperature-responsive poly(butyl methacrylate) grafted polymer brushes. Impact of thickness and temperature on wetting, morphology, and cell growth

Grafted polymer brush coatings for growth of cow granulosa cells and oocyte-cumulus cell complexes

Humidity and solvent effects in spin-coated polythiophene–polystyrene blends

Humidity and wetting effects in spin-cast blends of insulating polymers and conducting polyaniline doped with DBSA

Influence of humid atmosphere on phase separation in polyaniline–polystyrene thin films

Integral geometry analysis of fluorescence micrographs for quantitative relative comparison of protein adsorption onto polymer surfaces

Lamellar structures formed in spin-cast blends of insulating and conducting polymers

Modification of poly(ethylene terephthalate) surface with attached dextran macromolecules

Multilayers of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microspheres with core-shell morphology: Characterization by AFM, SIMS and XPS

Orientation of Biotin-Binding Sites in Streptavidin Adsorbed onto the Surface of Polythiophene Films

PDMS substrate stiffness affects the morphology and growth profiles of cancerous prostate and melanoma cells

Pattern Formation in Thin Polymer Films Containing Conducting Polyaniline

Pattern guided structure formation in polymer films of asymmetric blends

Pattern replication examined with integral geometry approach: application to ion milling of polymer blend films

Pattern replication in polyaniline–polystyrene thin films

Patterning of cancerous cells driven by a combined modification of mechanical and chemical properties of the substrate

Physico-chemical properties of PDMS surfaces suitable as substrates for cell cultures

Precise positioning of cancerous cells on PDMS substrates with gradients of elasticity

Protein coverage on silicon surfaces modified with amino-organic films: a study by AFM and angle-resolved XPS.

Reverse contrast and substructures in protein micro-patterns on 3D polymer surfaces

Selective protein adsorption on polymer patterns formed by self-organization and soft lithography

Shape-Controlled synthesis of silver nanoparticles in temperature-responsive grafted polymer brushes for optical applications

Structure Evolution in Layers of Polymer Blend Nanoparticles

Structures Formed in Spin-Cast Films of Polystyrene Blends with Poly(butyl methacrylate) Isomers

Structures in Multicomponent Polymer Films: Their Formation, Observation and Applications in Electronics and Biotechnology

Substrate-Determined Shape of Free Surface Profiles in Spin-Cast Polymer Blend Films

Substructure formation during pattern transposition from substrate into polymer blend film

Surface Patterns in Solvent-Cast Polymer Blend Films Analyzed with an Integral-Geometry Approach

Swelling of poly(3-alkylthiophene) films exposed to solvent vapors and humidity: Evaluation of solubility parameters

Synthesis and Postpolymerization Modification of Thermoresponsive Coatings Based on Pentaerythritol Monomethacrylate: Surface Analysis, Wettability, and Protein Adsorption.

Temperature and pH dual-responsive POEGMA-based coatings for protein adsorption

Temperature-Controlled Orientation of Proteins on Temperature-Responsive Grafted Polymer Brushes: Poly(butyl methacrylate) vs Poly(butyl acrylate): Morphology, Wetting, and Protein Adsorption

Temperature-Controlled Three-Stage Switching of Wetting, Morphology, and Protein Adsorption.

Temperature-responsive grafted polymer brushes obtained from renewable sources with potential application as substrates for tissue engineering

Temperature-responsive peptide-mimetic coating based on poly(N-methacryloyl-l-leucine): Properties, protein adsorption and cell growth

Temperature-responsive properties of poly(4-vinylpyridine) coatings: influence of temperature on the wettability, morphology, and protein adsorption

Discrimination between HCV29 and T24 by controlled proliferation of cells co-cultured on substrates with different elasticity