Lista de obras - Yoon Seok Jung - Dominio Público Uruguay

A simple preparation method for spherical carbons and their anodic performance in lithium secondary batteries

All-Solid-State Rechargeable Lithium Batteries Using LiTi2(PS4)3Cathode with Li2S-P2S5Solid Electrolyte

All-solid-state lithium-ion batteries with TiS2 nanosheets and sulphide solid electrolytes

Aqueous-solution synthesis of Na3SbS4 solid electrolytes for all-solid-state Na-ion batteries

Bendable and thin sulfide solid electrolyte film: a new electrolyte opportunity for free-standing and stackable high-energy all-solid-state lithium-ion batteries.

artículo científico publicado en 2015

Carbon-coated nanoclustered LiMn0.71Fe0.29PO4 cathode for lithium-ion batteries

article published in 2012

Coatable Li4 SnS4 Solid Electrolytes Prepared from Aqueous Solutions for All-Solid-State Lithium-Ion Batteries

artículo científico publicado en 2017

Comparative Study of TiS 2 /Li-In All-Solid-State Lithium Batteries Using Glass-Ceramic Li 3 PS 4 and Li 10 GeP 2 S 12 Solid Electrolytes

Conformal Surface Coatings to Enable High Volume Expansion Li-Ion Anode Materials

artículo científico publicado en 2010

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All-Solid-State Batteries

Diagnosis of failure modes for all-solid-state Li-ion batteries enabled by three-electrode cells

Direct Access to Mesoporous Crystalline TiO2/Carbon Composites with Large and Uniform Pores for Use as Anode Materials in Lithium Ion Batteries

Effects of Atomic Layer Deposition of Al2O3 on the Li[Li0.20Mn0.54Ni0.13Co0.13]O2 Cathode for Lithium-Ion Batteries

Electrochemical reactivity of ball-milled MoO3−y as anode materials for lithium-ion batteries

Electrochemical stability of bis(trifluoromethanesulfonyl)imide-based ionic liquids at elevated temperature as a solvent for a titanium oxide bronze electrode

scholarly article by Junyoung Mun et al published December 2009 in Journal of Power Sources

Enhanced Stability of LiCoO[sub 2] Cathodes in Lithium-Ion Batteries Using Surface Modification by Atomic Layer Deposition

article by Yoon Seok Jung et al published 2010 in Journal of the Electrochemical Society

Excellent Compatibility of Solvate Ionic Liquids with Sulfide Solid Electrolytes: Toward Favorable Ionic Contacts in Bulk-Type All-Solid-State Lithium-Ion Batteries

Extremely Durable High-Rate Capability of a LiNi0.4Mn0.4Co0.2O2 Cathode Enabled with Single-Walled Carbon Nanotubes

Facile Method to Prepare for the Ni2P Nanostructures with Controlled Crystallinity and Morphology as Anode Materials of Lithium-Ion Batteries

artículo científico publicado en 2018

Fe3O4 Nanoparticles Confined in Mesocellular Carbon Foam for High Performance Anode Materials for Lithium-Ion Batteries

artículo científico publicado en 2011

Glass–ceramic Li2S–P2S5 electrolytes prepared by a single step ball billing process and their application for all-solid-state lithium–ion batteries

Graphene Oxide Assisted Synthesis of Self-assembled Zinc Oxide for Lithium-Ion Battery Anode

article published in 2016

Highly Improved Rate Capability for a Lithium-Ion Battery Nano-Li4Ti5O12 Negative Electrode via Carbon-Coated Mesoporous Uniform Pores with a Simple Self-Assembly Method

scholarly article by Eunae Kang et al published 9 September 2011 in Advanced Functional Materials

Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes

Infiltration of Solution-Processable Solid Electrolytes into Conventional Li-Ion-Battery Electrodes for All-Solid-State Li-Ion Batteries

artículo científico publicado en 2017

Interfacial architecture for extra Li⁺ storage in all-solid-state lithium batteries

artículo científico publicado en 2014

Ion-Exchangeable Functional Binders and Separator for High Temperature Performance of Li1.1Mn1.86Mg0.04O4Spinel Electrodes in Lithium Ion Batteries

article published in 2013

Issues and Challenges for Bulk-Type All-Solid-State Rechargeable Lithium Batteries using Sulfide Solid Electrolytes

article published in 2015

Li3BO3–Li2CO3: Rationally Designed Buffering Phase for Sulfide All-Solid-State Li-Ion Batteries

artículo científico publicado en 2018

Liquid Gallium Electrode Confined in Porous Carbon Matrix as Anode for Lithium Secondary Batteries

scholarly article by Kyu T. Lee et al published 2008 in Electrochemical and Solid-State Letters

Na3 SbS4 : A Solution Processable Sodium Superionic Conductor for All-Solid-State Sodium-Ion Batteries.

artículo científico

New Na-Ion Solid Electrolytes Na4− x Sn1− x Sb x S4 (0.02 ≤ x ≤ 0.33) for All-Solid-State Na-Ion Batteries

Porous spherical polyacrylonitrile-carbon nanocomposite with high loading of sulfur for lithium–sulfur batteries

Preparation of Li2S–GeSe2–P2S5 electrolytes by a single step ball milling for all-solid-state lithium secondary batteries

Robust lithium-ion anodes based on nanocomposites of iron oxide–carbon–silicate

Role of Electrochemically Driven Cu Nanograins in CuGa2Electrode

Semimicro-size agglomerate structured silicon-carbon composite as an anode material for high performance lithium-ion batteries

article published in 2016

Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries

article by Dae Yang Oh et al published 2017 in Journal of Materials Chemistry A

Si–carbon core–shell composite anode in lithium secondary batteries

Sn-Carbon Core-Shell Powder for Anode in Lithium Secondary Batteries

Solution-Processable Glass LiI-Li4 SnS4 Superionic Conductors for All-Solid-State Li-Ion Batteries.

artículo científico publicado en 2015

Solution-derived glass-ceramic NaI·Na3SbS4 superionic conductors for all-solid-state Na-ion batteries

Surface chemistry of LiNi 0.5 Mn 1.5 O 4 particles coated by Al 2 O 3 using atomic layer deposition for lithium-ion batteries

article

Synthesis of tin-encapsulated spherical hollow carbon for anode material in lithium secondary batteries

artículo científico publicado en 2003

Tailoring Solution-Processable Li Argyrodites Li6+xP1-xMxS5I (M = Ge, Sn) and Their Microstructural Evolution Revealed by Cryo-TEM for All-Solid-State Batteries

artículo científico publicado en 2020

The role of in situ generated nano-sized metal particles on the coulombic efficiency of MGeO3 (M=Cu, Fe, and Co) electrodes

scholarly article by Chang H. Kim et al published July 2009 in Electrochimica Acta

Thermo-electrochemical Activation of an In-Cu Intermetallic Electrode for the Anode in Lithium Secondary Batteries

Thermo-electrochemical activation of Cu3Sn negative electrode for lithium-ion batteries

Thermoelectrochemically Activated MoO[sub 2] Powder Electrode for Lithium Secondary Batteries

Tin Phosphide as a Promising Anode Material for Na-Ion Batteries

article published in 2014

Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes

Ultrathin Direct Atomic Layer Deposition on Composite Electrodes for Highly Durable and Safe Li-Ion Batteries

artículo científico publicado en 2010

Ultrathin coatings on nano-LiCoO2 for Li-ion vehicular applications

artículo científico publicado en 2010

Unexpected Improved Performance of ALD Coated LiCoO2/Graphite Li-Ion Batteries

article

Using Atomic Layer Deposition to Hinder Solvent Decomposition in Lithium Ion Batteries: First-Principles Modeling and Experimental Studies

artículo científico publicado en 2011

Wet-Chemical Tuning of Li3-x PS4 (0≤x≤0.3) Enabled by Dual Solvents for All-Solid-State Lithium-Ion Batteries

artículo científico publicado en 2019

Lista de obras de Yoon Seok Jung

A simple preparation method for spherical carbons and their anodic performance in lithium secondary batteries

All-Solid-State Rechargeable Lithium Batteries Using LiTi2(PS4)3Cathode with Li2S-P2S5Solid Electrolyte

All-solid-state lithium-ion batteries with TiS2 nanosheets and sulphide solid electrolytes

Aqueous-solution synthesis of Na3SbS4 solid electrolytes for all-solid-state Na-ion batteries

Bendable and thin sulfide solid electrolyte film: a new electrolyte opportunity for free-standing and stackable high-energy all-solid-state lithium-ion batteries.

Carbon-coated nanoclustered LiMn0.71Fe0.29PO4 cathode for lithium-ion batteries

Coatable Li4 SnS4 Solid Electrolytes Prepared from Aqueous Solutions for All-Solid-State Lithium-Ion Batteries

Comparative Study of TiS 2 /Li-In All-Solid-State Lithium Batteries Using Glass-Ceramic Li 3 PS 4 and Li 10 GeP 2 S 12 Solid Electrolytes

Conformal Surface Coatings to Enable High Volume Expansion Li-Ion Anode Materials

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All-Solid-State Batteries

Diagnosis of failure modes for all-solid-state Li-ion batteries enabled by three-electrode cells

Direct Access to Mesoporous Crystalline TiO2/Carbon Composites with Large and Uniform Pores for Use as Anode Materials in Lithium Ion Batteries

Effects of Atomic Layer Deposition of Al2O3 on the Li[Li0.20Mn0.54Ni0.13Co0.13]O2 Cathode for Lithium-Ion Batteries

Electrochemical reactivity of ball-milled MoO3−y as anode materials for lithium-ion batteries

Electrochemical stability of bis(trifluoromethanesulfonyl)imide-based ionic liquids at elevated temperature as a solvent for a titanium oxide bronze electrode

Enhanced Stability of LiCoO[sub 2] Cathodes in Lithium-Ion Batteries Using Surface Modification by Atomic Layer Deposition

Excellent Compatibility of Solvate Ionic Liquids with Sulfide Solid Electrolytes: Toward Favorable Ionic Contacts in Bulk-Type All-Solid-State Lithium-Ion Batteries

Extremely Durable High-Rate Capability of a LiNi0.4Mn0.4Co0.2O2 Cathode Enabled with Single-Walled Carbon Nanotubes

Facile Method to Prepare for the Ni2P Nanostructures with Controlled Crystallinity and Morphology as Anode Materials of Lithium-Ion Batteries

Fe3O4 Nanoparticles Confined in Mesocellular Carbon Foam for High Performance Anode Materials for Lithium-Ion Batteries

Glass–ceramic Li2S–P2S5 electrolytes prepared by a single step ball billing process and their application for all-solid-state lithium–ion batteries

Graphene Oxide Assisted Synthesis of Self-assembled Zinc Oxide for Lithium-Ion Battery Anode

Highly Improved Rate Capability for a Lithium-Ion Battery Nano-Li4Ti5O12 Negative Electrode via Carbon-Coated Mesoporous Uniform Pores with a Simple Self-Assembly Method

Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes

Infiltration of Solution-Processable Solid Electrolytes into Conventional Li-Ion-Battery Electrodes for All-Solid-State Li-Ion Batteries

Interfacial architecture for extra Li⁺ storage in all-solid-state lithium batteries

Ion-Exchangeable Functional Binders and Separator for High Temperature Performance of Li1.1Mn1.86Mg0.04O4Spinel Electrodes in Lithium Ion Batteries

Issues and Challenges for Bulk-Type All-Solid-State Rechargeable Lithium Batteries using Sulfide Solid Electrolytes

Li3BO3–Li2CO3: Rationally Designed Buffering Phase for Sulfide All-Solid-State Li-Ion Batteries

Liquid Gallium Electrode Confined in Porous Carbon Matrix as Anode for Lithium Secondary Batteries

Na3 SbS4 : A Solution Processable Sodium Superionic Conductor for All-Solid-State Sodium-Ion Batteries.

New Na-Ion Solid Electrolytes Na4− x Sn1− x Sb x S4 (0.02 ≤ x ≤ 0.33) for All-Solid-State Na-Ion Batteries

Porous spherical polyacrylonitrile-carbon nanocomposite with high loading of sulfur for lithium–sulfur batteries

Preparation of Li2S–GeSe2–P2S5 electrolytes by a single step ball milling for all-solid-state lithium secondary batteries

Robust lithium-ion anodes based on nanocomposites of iron oxide–carbon–silicate

Role of Electrochemically Driven Cu Nanograins in CuGa2Electrode

Semimicro-size agglomerate structured silicon-carbon composite as an anode material for high performance lithium-ion batteries

Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries

Si–carbon core–shell composite anode in lithium secondary batteries

Sn-Carbon Core-Shell Powder for Anode in Lithium Secondary Batteries

Solution-Processable Glass LiI-Li4 SnS4 Superionic Conductors for All-Solid-State Li-Ion Batteries.

Solution-derived glass-ceramic NaI·Na3SbS4 superionic conductors for all-solid-state Na-ion batteries

Surface chemistry of LiNi 0.5 Mn 1.5 O 4 particles coated by Al 2 O 3 using atomic layer deposition for lithium-ion batteries

Synthesis of tin-encapsulated spherical hollow carbon for anode material in lithium secondary batteries

Tailoring Solution-Processable Li Argyrodites Li6+xP1-xMxS5I (M = Ge, Sn) and Their Microstructural Evolution Revealed by Cryo-TEM for All-Solid-State Batteries

The role of in situ generated nano-sized metal particles on the coulombic efficiency of MGeO3 (M=Cu, Fe, and Co) electrodes

Thermo-electrochemical Activation of an In-Cu Intermetallic Electrode for the Anode in Lithium Secondary Batteries

Thermo-electrochemical activation of Cu3Sn negative electrode for lithium-ion batteries

Thermoelectrochemically Activated MoO[sub 2] Powder Electrode for Lithium Secondary Batteries

Tin Phosphide as a Promising Anode Material for Na-Ion Batteries

Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes

Ultrathin Direct Atomic Layer Deposition on Composite Electrodes for Highly Durable and Safe Li-Ion Batteries

Ultrathin coatings on nano-LiCoO2 for Li-ion vehicular applications

Unexpected Improved Performance of ALD Coated LiCoO2/Graphite Li-Ion Batteries

Using Atomic Layer Deposition to Hinder Solvent Decomposition in Lithium Ion Batteries: First-Principles Modeling and Experimental Studies

Wet-Chemical Tuning of Li3-x PS4 (0≤x≤0.3) Enabled by Dual Solvents for All-Solid-State Lithium-Ion Batteries