Lista de obras - Siegfried Jaecques - Dominio Público Uruguay

3D-microleakage assessment of adhesive interfaces: exploratory findings by μCT.

artículo científico publicado en 2014

A fast convolution-based methodology to simulate 2-D/3-D cardiac ultrasound images.

artículo científico publicado en 2009

A finite element analysis of the vibrational behaviour of the intra-operatively manufactured prosthesis-femur system.

artículo científico publicado en 2009

Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives

scientific article published on 01 June 2009

Assessment of the primary rotational stability of uncemented hip stems using an analytical model: comparison with finite element analyses.

artículo científico publicado en 2008

Biomechanical evaluation of platform switching in different implant protocols: computed tomography-based three-dimensional finite element analysis

artículo científico publicado el 1 de septiembre de 2010

Biomechanical evaluation of platform switching: different mismatch sizes, connection types, and implant protocols

artículo científico publicado en 2014

Bone Remodeling Around Implants with External Hexagon and Morse-Taper Connections: A Randomized, Controlled, Split-Mouth, Clinical Trial

artículo científico publicado en 2016

Constant strain rate and peri-implant bone modeling: an in vivo longitudinal micro-CT analysis.

artículo científico publicado en 2011

Detection of the insertion end point of cementless hip prostheses using the comparison between successive frequency response functions.

artículo científico publicado en 2008

Early periprosthetic bone remodelling around cemented and uncemented custom-made femoral components and their uncemented acetabular cups.

artículo científico publicado en 2011

Effect of constant strain rate, composed of varying amplitude and frequency, of early loading on peri-implant bone (re)modelling.

artículo científico publicado en 2007

Effect of controlled early implant loading on bone healing and bone mass in guinea pigs, as assessed by micro-CT and histology.

artículo científico publicado en 2006

Effect of strain at low-frequency loading on peri-implant bone (re)modelling: a guinea-pig experimental study.

artículo científico publicado en 2008

Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models.

artículo científico publicado en 2011

Immediate functional loading of single-tooth TiO2 grit-blasted implant restoration. A controlled prospective study in a porcine model. Part II: Histology and histomorphometry.

artículo científico publicado en 2007

In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses

artículo científico publicado en 2009

Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone.

artículo científico publicado en 2004

Influence of Connection Types and Implant Number on the Biomechanical Behavior of Mandibular Full-Arch Rehabilitation.

artículo científico publicado en 2016

Influence of implant connection type on the biomechanical environment of immediately placed implants - CT-based nonlinear, three-dimensional finite element analysis

artículo científico publicado en 2009

Influence of implant design on the biomechanical environment of immediately placed implants: computed tomography-based nonlinear three-dimensional finite element analysis

artículo científico publicado el 1 de noviembre de 2011

Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens

artículo científico publicado en 2008

Micro-CT based quantitative evaluation of caries excavation.

artículo científico publicado en 2010

Numerical simulation of the insertion process of an uncemented hip prosthesis in order to evaluate the influence of residual stress and contact distribution on the stem initial stability

artículo científico publicado en 2012

Positive effect of early loading on implant stability in the bi-cortical guinea-pig model.

artículo científico publicado en 2005

Relation between subject-specific hip joint loading, stress distribution in the proximal femur and bone mineral density changes after total hip replacement

artículo científico publicado en 2008

Resonance frequency analysis of implants in the guinea pig model: influence of boundary conditions and orientation of the transducer.

artículo científico publicado en 2006

Short fibre-reinforced composite for extensive direct restorations: a laboratory and computational assessment

artículo científico publicado en 2015

Technique sensitivity of water-free one-step adhesives.

artículo científico publicado en 2008

Telehealth on heart failure: results of the Recap project.

artículo científico publicado en 2015

Lista de obras de Siegfried Jaecques

3D-microleakage assessment of adhesive interfaces: exploratory findings by μCT.

A fast convolution-based methodology to simulate 2-D/3-D cardiac ultrasound images.

A finite element analysis of the vibrational behaviour of the intra-operatively manufactured prosthesis-femur system.

Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives

Assessment of the primary rotational stability of uncemented hip stems using an analytical model: comparison with finite element analyses.

Biomechanical evaluation of platform switching in different implant protocols: computed tomography-based three-dimensional finite element analysis

Biomechanical evaluation of platform switching: different mismatch sizes, connection types, and implant protocols

Bone Remodeling Around Implants with External Hexagon and Morse-Taper Connections: A Randomized, Controlled, Split-Mouth, Clinical Trial

Constant strain rate and peri-implant bone modeling: an in vivo longitudinal micro-CT analysis.

Detection of the insertion end point of cementless hip prostheses using the comparison between successive frequency response functions.

Early periprosthetic bone remodelling around cemented and uncemented custom-made femoral components and their uncemented acetabular cups.

Effect of constant strain rate, composed of varying amplitude and frequency, of early loading on peri-implant bone (re)modelling.

Effect of controlled early implant loading on bone healing and bone mass in guinea pigs, as assessed by micro-CT and histology.

Effect of strain at low-frequency loading on peri-implant bone (re)modelling: a guinea-pig experimental study.

Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models.

Immediate functional loading of single-tooth TiO2 grit-blasted implant restoration. A controlled prospective study in a porcine model. Part II: Histology and histomorphometry.

In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses

Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone.

Influence of Connection Types and Implant Number on the Biomechanical Behavior of Mandibular Full-Arch Rehabilitation.

Influence of implant connection type on the biomechanical environment of immediately placed implants - CT-based nonlinear, three-dimensional finite element analysis

Influence of implant design on the biomechanical environment of immediately placed implants: computed tomography-based nonlinear three-dimensional finite element analysis

Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens

Micro-CT based quantitative evaluation of caries excavation.

Numerical simulation of the insertion process of an uncemented hip prosthesis in order to evaluate the influence of residual stress and contact distribution on the stem initial stability

Positive effect of early loading on implant stability in the bi-cortical guinea-pig model.

Relation between subject-specific hip joint loading, stress distribution in the proximal femur and bone mineral density changes after total hip replacement

Resonance frequency analysis of implants in the guinea pig model: influence of boundary conditions and orientation of the transducer.

Short fibre-reinforced composite for extensive direct restorations: a laboratory and computational assessment

Technique sensitivity of water-free one-step adhesives.

Telehealth on heart failure: results of the Recap project.