Filtros de búsqueda

Lista de obras de Yi-Bing Cheng

4-fold photocurrent enhancement in ultrathin nanoplasmonic perovskite solar cells

artículo científico publicado en 2015

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

artículo científico publicado en 2014

A cyclopenta[1,2-b:5,4-b']dithiophene-porphyrin conjugate for mesoscopic solar cells: a D-π-D-A approach.

artículo científico publicado en 2014

A facile approach to alleviate photochemical degradation in high efficiency polymer solar cells

A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering.

artículo científico publicado en 2016

A power pack based on organometallic perovskite solar cell and supercapacitor

artículo científico publicado en 2015

Acoustic-optical phonon up-conversion and hot-phonon bottleneck in lead-halide perovskites.

artículo científico publicado en 2017

Al2 O3 Underlayer Prepared by Atomic Layer Deposition for Efficient Perovskite Solar Cells.

artículo científico publicado en 2017

Alkali Cation Doping for Improving the Structural Stability of 2D Perovskite in 3D/2D PSCs

artículo científico publicado en 2020

Alternative materials and processing techniques for optimized nanostructures in dye-sensitized solar cells.

artículo científico publicado en 2008

Amorphous hole-transporting layer in slot-die coated perovskite solar cells

artículo científico publicado en 2017

An efficient, flexible perovskite solar module exceeding 8% prepared with an ultrafast PbI2 deposition rate

artículo científico publicado en 2018

An optical fibre-based sensor for the detection of gaseous ammonia with methylammonium lead halide perovskite

An over 10% enhancement of dye-sensitized solar cell efficiency by tuning nanoparticle packing

scholarly article in RSC Advances, vol. 3 no. 38, 2013

Benefit of Grain Boundaries in Organic-Inorganic Halide Planar Perovskite Solar Cells

artículo científico publicado en 2015

Bis(9,9-dihexyl-9H-fluorene-7-yl)amine (BDFA) as a new donor for porphyrin-sensitized solar cells

Boosting the photocurrent density of p-type solar cells based on organometal halide perovskite-sensitized mesoporous NiO photocathodes

artículo científico publicado en 2014

CH₃NH₃PbI₃-based planar solar cells with magnetron-sputtered nickel oxide.

artículo científico publicado en 2014

Catalytic Activity and Impedance Behavior of Screen-Printed Nickel Oxide as Efficient Water Oxidation Catalysts

artículo científico publicado en 2015

Chemical Dopant Engineering in Hole Transport Layers for Efficient Perovskite Solar Cells: Insight into the Interfacial Recombination

artículo científico publicado en 2018

Controlled Growth of Monocrystalline Organo-Lead Halide Perovskite and Its Application in Photonic Devices

artículo científico

Controlling interfacial recombination in aqueous dye-sensitized solar cells by octadecyltrichlorosilane surface treatment.

artículo científico publicado en 2014

Correction to "Sequentially Reinforced Additive Coating for Transparent and Durable Superhydrophobic Glass"

scientific article published on 17 February 2020

Crystalline TiO2Nanorod Aggregates: Template-Free Fabrication and Efficient Light Harvesting in Dye-Sensitized Solar Cell Applications

Design and synthesis of dopant-free organic hole-transport materials for perovskite solar cells

artículo científico publicado en 2018

Dipole-field-assisted charge extraction in metal-perovskite-metal back-contact solar cells

artículo científico publicado en 2017

Direct observation of intrinsic twin domains in tetragonal CH3NH3PbI3.

artículo científico publicado en 2017

Dye-sensitized nanocrystalline solar cells incorporating ethylmethylimidazolium-based ionic liquid electrolytes

article published in 2006

Dye-sensitized nickel(II)oxide photocathodes for tandem solar cell applications.

artículo científico publicado en 2008

Dye-sensitized solar cells employing a single film of mesoporous TiO2 beads achieve power conversion efficiencies over 10%

scientific article published on 01 August 2010

Effect of TiO₂ microbead pore size on the performance of DSSCs with a cobalt based electrolyte.

artículo científico publicado en 2014

Effect of mesoporous TiO₂ bead diameter in working electrodes on the efficiency of dye-sensitized solar cells

scientific article published on 23 September 2011

Effect of seeding on formation of silicon carbide nanostructures from mesoporous silica-carbon nanocomposites

artículo científico publicado en 2008

Effect of the Microstructure of the Functional Layers on the Efficiency of Perovskite Solar Cells.

artículo científico publicado en 2017

Efficient Gas Adsorption Using Superamphiphobic Porous Monoliths as the under-Liquid Gas-Conductive Circuits

scientific article published on 26 June 2019

Efficient and Stable Inverted Planar Perovskite Solar Cells Using a Triphenylamine Hole-Transporting Material.

artículo científico publicado en 2018

Efficient p-type dye-sensitized solar cells based on disulfide/thiolate electrolytes.

artículo científico publicado en 2013

Enhanced open-circuit voltage of p-type DSC with highly crystalline NiO nanoparticles

artículo científico publicado en 2011

Enhanced performance of p-type dye-sensitized solar cells based on ultrasmall Mg-doped CuCrO2 nanocrystals.

artículo científico publicado en 2013

Fabrication of Silicon-Based Ceramic Synthesized from Mesoporous Carbon-Silica Nanocomposites

Facile synthesis of nanoporous TiC–SiC–C composites as a novel counter-electrode for dye sensitized solar cells

Fine tuning of fluorene-based dye structures for high-efficiency p-type dye-sensitized solar cells.

artículo científico publicado en 2014

Flexible and Semitransparent Organolead Triiodide Perovskite Network Photodetector Arrays with High Stability.

artículo científico publicado en 2015

Formation of novel mesoporous TiC microspheres through a sol–gel and carbothermal reduction process

Four-Terminal Tandem Solar Cells Using CH3NH3PbBr3 by Spectrum Splitting

artículo científico publicado en 2015

Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells

artículo científico publicado en 2014

Graphene/titanium carbide composites prepared by sol–gel infiltration and spark plasma sintering

scholarly article by Xiaojing Wang et al published January 2016 in Ceramics International

Growth, patterning and alignment of organolead iodide perovskite nanowires for optoelectronic devices

artículo científico publicado en 2015

High efficiency solid-state dye-sensitized solar cells using a cobalt(ii/iii) redox mediator

scholarly article by Xiao Li Zhang et al published 2017 in Journal of Materials Chemistry C

High-capacity optical long data memory based on enhanced Young's modulus in nanoplasmonic hybrid glass composites.

artículo científico publicado en 2018

High-performance top-gated monolayer SnS2 field-effect transistors and their integrated logic circuits.

artículo científico publicado en 2013

Highly efficient photocathodes for dye-sensitized tandem solar cells.

artículo científico publicado en 2009

Impact of Fullerene Mixing Behavior on the Microstructure, Photophysics, and Device Performance of Polymer/Fullerene Solar Cells.

artículo científico publicado en 2016

Improved Performance of Planar Perovskite Solar Cells Using an Amino-Terminated Multifunctional Fullerene Derivative as the Passivation Layer

scientific article published on 18 July 2019

Improved efficiency and stability of flexible dye sensitized solar cells on ITO/PEN substrates using an ionic liquid electrolyte.

artículo científico publicado en 2014

In-Depth Understanding of the Morphology–Performance Relationship in Polymer Solar Cells

Integrated planar and bulk dual heterojunctions capable of efficient electron and hole extraction for perovskite solar cells with >17% efficiency

Interface modification effect on the performance of CsxFA1-xPbIyBr3-y perovskite solar cells fabricated by evaporation/spray-coating method

scientific article published on 01 July 2020

Interfacial benzenethiol modification facilitates charge transfer and improves stability of cm-sized metal halide perovskite solar cells with up to 20% efficiency

Isolating and quantifying the impact of domain purity on the performance of bulk heterojunction solar cells

artículo científico publicado en 2017

Low-Temperature Presynthesized Crystalline Tin Oxide for Efficient Flexible Perovskite Solar Cells and Modules.

artículo científico publicado en 2018

Low-Temperature Solution-Processed Amorphous Titania Nanowire Thin Films for 1 cm2 Perovskite Solar Cells

scientific article published on 28 February 2020

Low-Temperature TiOx Compact Layer for Planar Heterojunction Perovskite Solar Cells.

artículo científico publicado en 2016

Meso/micro-porosity and phase separation in TiO2/SiO2/C nanocomposites

Metal Evaporation-Induced Degradation of Fullerene Acceptors in Polymer/Fullerene Solar Cells.

artículo científico publicado en 2015

Microstructural Characterisations of Perovskite Solar Cells - From Grains to Interfaces: Techniques, Features, and Challenges

Modulated Charge Injection in p-Type Dye-Sensitized Solar Cells Using Fluorene-Based Light Absorbers

artículo científico publicado en 2014

Molecular Engineering of Zinc-Porphyrin Sensitisers for p-Type Dye-Sensitised Solar Cells

artículo científico publicado en 2018

Molecular Engineering of Zinc-Porphyrin Sensitisers for p-Type Dye-Sensitised Solar Cells

artículo científico publicado en 2018

Morphology control of mesoporous silica-carbon nanocomposites via phase separation of poly(furfuryl alcohol) and silica in the sol–gel synthesis

Multiple Roles of Cobalt Pyrazol-Pyridine Complexes in High-Performing Perovskite Solar Cells

scientific article published on 05 August 2019

Mussel-Directed Synthesis of Nitrogen-Doped Anatase TiO2.

artículo científico publicado en 2016

Novel porphyrin-preparation, characterization, and applications in solar energy conversion.

artículo científico publicado en 2016

Optimizing semiconductor thin films with smooth surfaces and well-interconnected networks for high-performance perovskite solar cells

Oriented Attachment as the Mechanism for Microstructure Evolution in Chloride-Derived Hybrid Perovskite Thin Films

artículo científico publicado en 2019

Photonics and Optoelectronics of 2D Metal-Halide Perovskites

scientific article published on 27 June 2018

Photovoltaic performance and the energy landscape of CH3NH3PbI3

artículo científico publicado en 2015

Potassium-doped zinc oxide as photocathode material in dye-sensitized solar cells

artículo científico publicado en 2013

Print flexible solar cells

artículo científico publicado en 2016

Probing Molecular and Crystalline Orientation in Solution-Processed Perovskite Solar Cells

Recent progress in hybrid perovskite solar cells based on n-type materials

Reversible Structural Swell-Shrink and Recoverable Optical Properties in Hybrid Inorganic-Organic Perovskite

artículo científico publicado en 2016

Role of Pores in the Carbothermal Reduction of Carbon−Silica Nanocomposites into Silicon Carbide Nanostructures

scholarly article by Jianfeng Yao et al published January 2007 in Journal of Physical Chemistry C

Selective laser sintering of TiO2 nanoparticle film on plastic conductive substrate for highly efficient flexible dye-sensitized solar cell application

artículo científico publicado en 2014

Sensitization of nickel oxide: improved carrier lifetime and charge collection by tuning nanoscale crystallinity

artículo científico publicado en 2012

Sequentially Reinforced Additive Coating for Transparent and Durable Superhydrophobic Glass

artículo científico publicado en 2018

Solvent Engineering of a Dopant-Free Spiro-OMeTAD Hole-Transport Layer for Centimeter-Scale Perovskite Solar Cells with High Efficiency and Thermal Stability

artículo científico publicado en 2020

Solvent-Mediated Dimension Tuning of Semiconducting Oxide Nanostructures as Efficient Charge Extraction Thin Films for Perovskite Solar Cells with Efficiency Exceeding 16%

Solvent-Mediated Intragranular-Coarsening of CH3NH3PbI3 Thin Films toward High-Performance Perovskite Photovoltaics.

artículo científico publicado en 2017

Spectral dependence of direct and trap-mediated recombination processes in lead halide perovskites using time resolved microwave conductivity.

artículo científico publicado en 2016

Spiky mesoporous anatase titania beads: a metastable ammonium titanate-mediated synthesis

artículo científico publicado en 2012

Spray deposition of AgBiS2 and Cu3BiS3 thin films for photovoltaic applications

Spray deposition of water-soluble multiwall carbon nanotube and Cu2ZnSnSe4 nanoparticle composites as highly efficient counter electrodes in a quantum dot-sensitized solar cell system

artículo científico publicado en 2013

Stability Comparison of Perovskite Solar Cells Based on Zinc Oxide and Titania on Polymer Substrates.

artículo científico publicado en 2016

Structural and Chemical Changes to CH3 NH3 PbI3 Induced by Electron and Gallium Ion Beams.

artículo científico publicado en 2018

Sub-100 °C solution processed amorphous titania nanowire thin films for high-performance perovskite solar cells

Sulfurization induced surface constitution and its correlation to the performance of solution-processed Cu2ZnSn(S,Se)4 solar cells.

artículo científico publicado en 2014

Synthesis and Evolution of Zirconium Carbide via Sol-Gel Route: Features of Nanoparticle Oxide-Carbon Reactions

scholarly article by Caen Ang et al published 19 March 2013 in Journal of the American Ceramic Society

Synthesis and Transfer of Large-Area Monolayer WS2 Crystals: Moving Toward the Recyclable Use of Sapphire Substrates.

artículo científico publicado en 2015

Synthesis and characterization of CuAlO(2) and AgAlO(2) delafossite oxides through low-temperature hydrothermal methods

artículo científico publicado en 2014

Synthesis of Mesoporous Carbon-Bonded TiC/SiC Composites by Direct Carbothermal Reduction of Sol-Gel Derived Monolithic Precursor

Synthesis of monodisperse mesoporous titania beads with controllable diameter, high surface areas, and variable pore diameters (14-23 nm).

artículo científico publicado en 2010

Synthesis of nanostructured silicon carbide spheres from mesoporous C–SiO2nanocomposites

artículo científico publicado en 2009

Tailoring the conduction band of titanium oxide by doping tungsten for efficient electron injection in a sensitized photoanode

artículo científico publicado en 2014

The Effect of the Scattering Layer in Dye-Sensitized Solar Cells Employing a Cobalt-Based Aqueous Gel Electrolyte

artículo científico publicado en 2015

Thin Films of Dendritic Anatase Titania Nanowires Enable Effective Hole-Blocking and Efficient Light-Harvesting for High-Performance Mesoscopic Perovskite Solar Cells

article by Wu-Qiang Wu et al published 17 April 2015 in Advanced Functional Materials

Thin Films of Tin Oxide Nanosheets Used as the Electron Transporting Layer for Improved Performance and Ambient Stability of Perovskite Photovoltaics

Three-dimensional hierarchical GeSe2 nanostructures for high performance flexible all-solid-state supercapacitors

artículo científico publicado en 2012

Three-dimensional titanium oxide nanoarrays for perovskite photovoltaics: surface engineering for cascade charge extraction and beneficial surface passivation

scholarly article published 2017

Titania nanobundle networks as dye-sensitized solar cell photoanodes.

artículo científico publicado en 2014

Ultrafast Fabrication of Flexible Dye-Sensitized Solar Cells by Ultrasonic Spray-Coating Technology

artículo científico publicado en 2015

Unraveling the Morphology of High Efficiency Polymer Solar Cells Based on the Donor Polymer PBDTTT-EFT

Wavelength-tunable waveguides based on polycrystalline organic-inorganic perovskite microwires.

artículo científico publicado en 2015

ZIF-11/Polybenzimidazole composite membrane with improved hydrogen separation performance

Zinc porphyrins with a pyridine-ring-anchoring group for dye-sensitized solar cells

artículo científico publicado en 2013

[6,6]-Phenyl-C61-Butyric Acid Methyl Ester/Cerium Oxide Bilayer Structure as Efficient and Stable Electron Transport Layer for Inverted Perovskite Solar Cells.

artículo científico publicado en 2018

p-Type mesoscopic NiO as an active interfacial layer for carbon counter electrode based perovskite solar cells

scientific article published on 01 March 2015