Filtros de búsqueda

Lista de obras de Enrico Tronconi

4th International conference on structured catalysts and reactors, ICOSCAR-4, Beijing, China, September 25–27, 2013

article

A C1microkinetic model for methane conversion to syngas on Rh/Al2O3

A Low Temperature Pathway Operating the Reduction of Stored Nitrates in Pt-Ba/Al2O3 Lean NOx Trap Systems

A Modeling Study of NH3 Slip Catalysts: Analysis of the SCR/PGM Interactions

A PGM-free NOx adsorber + selective catalytic reduction catalyst system (AdSCR) for trapping and reducing NOx in lean exhaust streams at low temperature

A comparative study of the NH3-SCR reactions over a Cu-zeolite and a Fe-zeolite catalyst

A complete model of scr monolith reactors for the analysis of interacting NO x reduction and SO 2 oxidation reactions

A fundamental investigation of gas/solid mass transfer in open-cell foams using a combined experimental and CFD approach

A kinetic analysis of the partial oxidation of C3H8 over a 2% Rh/Al2O3 catalyst in annular microreactor

A novel preparation method for “small” eggshell Co/γ-Al2O3 catalysts: A promising catalytic system for compact Fischer–Tropsch reactors

scholarly article by Laura Fratalocchi et al published May 2015 in Catalysis Today

A simplified approach to modeling of dual-layer ammonia slip catalysts

A study on the thermal behavior of structured plate-type catalysts with metallic supports for gas/solid exothermic reactions

A “Nitrate Route” for the low temperature “Fast SCR” reaction over a V2O5–WO3/TiO2commercial catalyst

scientific article published on 08 October 2004

Accurate prediction of the effective radial conductivity of highly conductive honeycomb monoliths with square channels

Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction

Addition of propene to carbon monoxide-hydrogen in higher alcohol synthesis over unpromoted and caesium-promoted ZnCrO catalysts

article

Ammonia blocking of the “Fast SCR” reactivity over a commercial Fe-zeolite catalyst for Diesel exhaust aftertreatment

An appraisal of the heat transfer properties of metallic open-cell foams for strongly exo-/endo-thermic catalytic processes in tubular reactors

An exact single-curve analysis technique for TPD spectra

An experimental investigation of Fischer–Tropsch synthesis over washcoated metallic structured supports

An investigation of the thermodynamic constraints in higher alcohol synthesis over Cs-Promoted ZnCr-oxide catalyst*1

Bunlsi—a fortran program for solution of systems of nonlinear algebraic equations

scholarly article by Guido Buzzi Ferraris & Enrico Tronconi published January 1986 in Computers & Chemical Engineering

Catalytic Removal of NOx Under Lean Conditions from Stationary and Mobile Sources

scholarly article

Catalytic partial oxidation of CH4 and C3H8: experimental and modeling study of the dynamic and steady state behavior of a pilot-scale reformer

Coating method for Ni/MgAl2O4 deposition on metallic foams

Cold Start Effect Phenomena over Zeolite SCR Catalysts for Exhaust Gas Aftertreatment

Combined use of a mass-spectrometer and a UV analyzer in the dynamic study of NH3-SCR for diesel exhaust aftertreatment

Comparison among structured and packed-bed reactors for the catalytic partial oxidation of CH4 at short contact times

Conductive Monolithic Catalysts: Development and Industrial Pilot Tests for the Oxidation of o-Xylene to Phthalic Anhydride

article

Current status of modeling lean exhaust gas aftertreatment catalysts

Design of novel monolith catalyst supports for gas/solid reactions with heat exchange

article by Gianpiero Groppi & Enrico Tronconi published June 2000 in Chemical Engineering Science

Detailed Kinetics of the Fischer–Tropsch Synthesis on Cobalt Catalysts Based on H-Assisted CO Activation

scholarly article by Carlo Giorgio Visconti et al published 13 August 2011 in Topics in Catalysis

Detailed kinetic modeling of the NH3–NO/NO2 SCR reactions over a commercial Cu-zeolite catalyst for Diesel exhausts after treatment

Detailed kinetics of the Fischer–Tropsch synthesis over Co-based catalysts containing sulphur

Development of a complete kinetic model for the Fischer–Tropsch synthesis over Co/Al 2 O 3 catalysts

article

Development of a heat transport model for open-cell metal foams with high cell densities

article

Development of chemically consistent models of NH3-SCR reactions over Fe-zeolite catalysts for the aftertreatment of Diesel engine exhausts

article

Diesel NOx aftertreatment catalytic technologies: Analogies in LNT and SCR catalytic chemistry

Diffusion-limited temperature programmed desorption from heterogeneous catalytic surfaces

Dominant Reaction Pathways in the Catalytic Partial Oxidation of CH4 on Rh

Dynamic Methods in Catalytic Reaction Engineering: Applications to the Investigation of the NH3Selective Catalytic Reduction Reactions for Diesel Emission Control

Dynamic methods for catalytic kinetics

Effect of operating variables on the enhanced SCR reaction over a commercial V2O5–WO3/TiO2 catalyst for stationary applications

article by Pio Forzatti et al published April 2012 in Catalysis Today

Enabling small-scale methanol synthesis reactors through the adoption of highly conductive structured catalysts

Enhanced NH3 Selective Catalytic Reduction for NOx Abatement

artículo científico publicado en 2009

Experimental Study of the NO Oxidation to NO2 Over Metal Promoted Zeolites Aimed at the Identification of the Standard SCR Rate Determining Step

Experimental and Modelling Study of a Dual-Layer NH3 Slip Monolith Catalyst for Automotive SCR Aftertreatment Systems

Experimental and modeling analysis of the effect of catalyst aging on the performance of a short contact time adiabatic CH4-CPO reactor

Experimental and modeling study of a dual-layer (SCR+PGM) NH3 slip monolith catalyst (ASC) for automotive SCR after treatment systems. Part 2. Validation of PGM kinetics and modeling of the dual-layer ASC monolith

Experimental and modeling study of a dual-layer (SCR+PGM) NH3 slip monolith catalyst (ASC) for automotive SCR aftertreatment systems. Part 1. Kinetics for the PGM component and analysis of SCR/PGM interactions

Experimental and modeling study of the impact of interphase and intraphase diffusional limitations on the DeNOx efficiency of a V-based extruded catalyst for NH 3 –SCR of Diesel exhausts

Experimental criteria for diffusional limitations during temperature-programmed desorption from porous catalysts

FTIR in situ mechanistic study of the NH3NO/NO2 “Fast SCR” reaction over a commercial Fe-ZSM-5 catalyst

Fischer–Tropsch synthesis on a Co/Al2O3 catalyst with CO2 containing syngas

article published in 2009

Generalized Correlation for Gas/Solid Mass-Transfer Coefficients in Metallic and Ceramic Foams

article published in 2007

Heat Transfer Characterization of Metallic Foams

Heat transfer properties of metal foam supports for structured catalysts: Wall heat transfer coefficient

High interaction regime Lockhart-Martinelli model for pressure drop in trickle-bed reactors

Higher Alcohol Synthesis over Alkali Metal-Promoted High-Temperature Methanol Catalysts

Honeycomb supports with high thermal conductivity for gas/solid chemical processes

article published in 2005

How to control the selectivity in the reduction of NOx with H2 over Pt-Ba/Al2O3 Lean NOx Trap catalysts

Identification of nitrites/HONO as primary products of NO oxidation over Fe-ZSM-5 and their role in the Standard SCR mechanism: A chemical trapping study

In-situ DRIFTS measurements for the mechanistic study of NO oxidation over a commercial Cu-CHA catalyst

article

Influence of the Substrate Properties on the Performances of NH3-SCR Monolithic Catalysts for the Aftertreatment of Diesel Exhaust: An Experimental and Modeling Study

Inhibition/promotion of a catalytic reaction by the reactant of a simultaneous diffusion-limited reaction

Intensifying heat transfer in Fischer-Tropsch tubular reactors through the adoption of conductive packed foams

Investigations on catalytic combustors for gas turbine applications through mathematical model analysis

Laminar flow and forced convection heat transfer in plate-type monolith structures by a finite element solution

Mass-Transfer Characterization of Metallic Foams as Supports for Structured Catalysts

Mathematical modelling of cold start effects over zeolite SCR catalysts for exhaust gas aftertreatment

Mechanistic aspects of the higher alcohol synthesis over unpromoted ZnCrO: 1-Propanol flow microreactor study

Mechanistic kinetic treatment of the chain growth process in higher alcohol synthesis over a Cs-promoted Zn-Cr-O catalyst

Methods for the catalytic activation of metallic structured substrates

Microkinetic analysis of CH4 CPO tests with CO2-diluted feed streams

Modelling and experimental verification of TPD from porous catalysts

Modelling of an SCR catalytic converter for diesel exhaust after treatment: Dynamic effects at low temperature

Modelling op catalytic combustors for gas turbine applications

Modelling the ammonia adsorption–desorption process over an Fe–zeolite catalyst for SCR automotive applications

Monolithic catalysts with high thermal conductivity for the Fischer–Tropsch synthesis in tubular reactors

Monolithic catalysts with ‘high conductivity’ honeycomb supports for gas/solid exothermic reactions: characterization of the heat-transfer properties

article published in 2004

NH3 SCR of NOx for diesel exhausts aftertreatment: role of NO2 in catalytic mechanism, unsteady kinetics and monolith converter modelling

NH3-NO/NO2 SCR for diesel exhausts after treatment: mechanism and modelling of a catalytic converter

NH3-SCR of NO over a V-based catalyst: Low-T redox kinetics with NH3inhibition

NH3–NO/NO2 SCR for Diesel Exhausts Aftertreatment: Reactivity, Mechanism and Kinetic Modelling of Commercial Fe- and Cu-Promoted Zeolite Catalysts

NH3–NO/NO2 chemistry over V-based catalysts and its role in the mechanism of the Fast SCR reaction

article published in 2006

NO/NO2/N2O–NH3 SCR reactions over a commercial Fe-zeolite catalyst for diesel exhaust aftertreatment: Intrinsic kinetics and monolith converter modelling

NO2 adsorption on Fe- and Cu-zeolite catalysts: The effect of the catalyst red–ox state

NOx Storage Reduction over PtBa/γ-Al2O3 Catalyst

NOx removal catalysis under lean conditions

New insights in the NOx reduction mechanism with H2 over Pt–Ba/γ-Al2O3 lean NOx trap catalysts under near-isothermal conditions

New “Enhanced NH3-SCR” Reaction for NOx Emission Control

Numerical Simulation of Ammonia SCR-Catalytic Converters: Model Development and Application

Numerical Simulation of NO/NO2/NH3 Reactions on SCR-Catalytic Converters:Model Development and Applications

article

Numerical simulation of heat transfer in the near-wall region of tubular reactors packed with metal open-cell foams

On the dynamic behavior of “NOx-storage/reduction” Pt–Ba/Al2O3 catalyst

Optimal design of a CH4 CPO-reformer with honeycomb catalyst: Combined effect of catalyst load and channel size on the surface temperature profile

Optimization of compact multitubular fixed-bed reactors for the methanol synthesis loaded with highly conductive structured catalysts

Preface

Production and characterization of copper periodic open cellular structures made by 3D printing-replica technique

artículo científico publicado en 2020

Reactivity of NO/NO2–NH3 SCR system for diesel exhaust aftertreatment: Identification of the reaction network as a function of temperature and NO2 feed content

Redox features in the catalytic mechanism of the “standard” and “fast” NH3-SCR of NOx over a V-based catalyst investigated by dynamic methods

Removal of NOx from Diesel Exhausts: The New “Enhanced NH3-SCR” Reaction

Role of Nitrate Species in the “NO2-SCR” Mechanism over a Commercial Fe-zeolite Catalyst for SCR Mobile Applications

Role of gas-phase chemistry in the rich combustion of H2 and CO over a Rh/Al2O3 catalyst in annular reactor

Selective oxidation of n-butane to maleic anhydride in fluid bed reactors: detailed kinetic investigation and reactor modelling

Simulation of a structured catalytic reactor for exothermic methanation reactions producing synthetic natural gas

Steady-state and transient analysis of a CH4-catalytic partial oxidation reformer

Steam and dry reforming of methane on Rh: Microkinetic analysis and hierarchy of kinetic models

Structured catalysts for non-adiabatic applications

Structured reactors for kinetic measurements in catalytic combustion

Study of a Fe–zeolite-based system as NH3-SCR catalyst for diesel exhaust aftertreatment

Synergy of Homogeneous and Heterogeneous Chemistry Probed by In Situ Spatially Resolved Measurements of Temperature and Composition

article

Synthesis of C2+ oxygenates from methanol at atmospheric pressure over alkali-promoted zinc-chromium oxide catalysts

Synthesis of alcohols from carbon oxides and hydrogen

TPSR Study of 1-Butanol over a Zn-Cr-O Catalyst

The Effect of CH4 on NH3-SCR Over Metal-Promoted Zeolite Catalysts for Lean-Burn Natural Gas Vehicles

article published in 2018

The NH3Inhibition Effect in the Standard SCR Reaction over a Commercial Fe-zeolite Catalyst for Diesel Exhaust Aftertreatment: An Experimental and Modeling Study

The Pt-Ba Interaction in Lean NOx Trap Systems

The chemistry of the NO/NO2–NH3 “fast” SCR reaction over Fe-ZSM5 investigated by transient reaction analysis

article published in 2008

Theoretical analysis of mass and heat transfer in monolith catalysts with triangular channels

Thermal desorption from heterogeneous surfaces; normalized curve treatment

article by Pio Forzatti et al published February 1984 in Surface Science

Transient response method applied to the kinetic analysis of the DeNOx–SCR reaction

Two-dimensional detailed modeling of fuel-rich H 2 combustion over Rh / Al 2 O 3 catalyst

Unifying redox kinetics for standard and fast NH3-SCR over a V2O5-WO3/TiO2catalyst

Washcoating and chemical testing of a commercial Cu/ZnO/Al2O3 catalyst for the methanol synthesis over copper open-cell foams

Washcoating method for Pd/γ-Al2O3 deposition on metallic foams