Lista de obras - Saverio Affatato - Dominio Público Uruguay

A Critical Analysis of TKR In Vitro Wear Tests Considering Predicted Knee Joint Loads

scientific article published on 15 May 2019

A computerized system for radiographical evaluation in total hip arthroplasty

scientific article published on 01 April 1995

A new protocol for wear testing of total knee prostheses from real joint kinematic data: Towards a scenario of realistic simulations of daily living activities.

artículo científico publicado en 2016

A new protocol from real joint motion data for wear simulation in total knee arthroplasty: stair climbing.

artículo científico publicado en 2014

Advanced nanocomposite materials for orthopaedic applications. I. A long-term in vitro wear study of zirconia-toughened alumina.

artículo científico publicado en 2006

Alumina-on-alumina hip implants: A wear study of retrieved components

artículo científico publicado en 2012

An easy technique to digest and isolate UHMWPE wear particles from a hip joint simulator.

artículo científico publicado en 2004

An in vitro investigation of diamond-like carbon as a femoral head coating

artículo científico publicado en 2000

Bi-unicondylar knee prosthesis functional assessment utilizing force-control wear testing

artículo científico publicado en 2010

Bi-unicondylar knee replacement laxity with changes to simulated soft tissue constraints

artículo científico publicado en 2013

Burst Strength of BIOLOX®delta Femoral Heads and Its Dependence on Low-Temperature Environmental Degradation

scientific article published on 12 January 2020

Ceramic-on-metal for total hip replacement: mixing and matching can lead to high wear

scientific article published on 01 April 2010

Combined effect of the body mass index and implant size on the wear of retrieved total knee prostheses.

artículo científico publicado en 2014

Combined wear behavior and long-term implant-bone fixation of total knee replacement: a novel in vitro set-up.

artículo científico publicado en 2010

Comparison of Meshing Strategies in THR Finite Element Modelling

artículo científico publicado en 2019

Development of a Novel in Silico Model to Investigate the Influence of Radial Clearance on the Acetabular Cup Contact Pressure in Hip Implants

article

Displacement or Force Control Knee Simulators? Variations in Kinematics and in Wear

scientific article published on 06 July 2015

Does cyclic stress and accelerated ageing influence the wear behavior of highly crosslinked polyethylene?

artículo científico publicado en 2016

Does the Hirsch Index Improve Research Quality in the Field of Biomaterials? A New Perspective in the Biomedical Research Field

article

Does the addition of vitamin E to conventional UHMWPE improve the wear performance of hip acetabular cups? Micro-Raman characterization of differently processed polyethylene acetabular cups worn on a hip joint simulator

artículo científico publicado en 2020

Does the body mass index influence the long-term survival of unicompartmental knee prostheses? A retrospective multi-centre study

scientific article published on 13 November 2018

Double-Incision Approach and Early Rehabilitation in a Complicated Bicondylar Tibial Plateau Fracture: A Case Report ⬇️

artículo científico publicado en 2017

Effect of head surface roughness and sterilization on wear of UHMWPE acetabular cups.

artículo científico publicado en 2009

Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking

artículo científico publicado en 2018

How to measure wear following total hip arthroplasty.

artículo científico

In Silico Optimization of Femoral Fixator Position and Configuration by Parametric CAD Model

artículo científico publicado en 2019

In Vitro versus In Vivo Phase Instability of Zirconia-Toughened Alumina Femoral Heads: A Critical Comparative Assessment.

artículo científico publicado en 2017

In vitro effects on mobile polyethylene insert under highly demanding daily activities: stair climbing.

artículo científico publicado en 2014

In vitro wear performance of standard, crosslinked, and vitamin-E-blended UHMWPE

article

Integrated friction measurements in hip wear simulations: short-term results

article

Is ceramic-on-ceramic squeaking phenomenon reproducible in vitro? A long-term simulator study under severe conditions

scientific article published on 01 October 2009

Is micro-computed tomography useful for wear assessment of ceramic femoral heads? A preliminary evaluation of volume measurements.

artículo científico publicado en 2016

Knee Wear Assessment: 3D Scanners Used as a Consolidated Procedure

scientific article published on 20 May 2020

Leg length measurement: a new method to assure the correct leg length in total hip arthroplasty.

artículo científico publicado en 2000

Materials for Hip Prostheses: A Review of Wear and Loading Considerations

article

May the surface roughness of the retrieved femoral head influence the wear behavior of the polyethylene liner?

artículo científico publicado en 2015

Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator.

artículo científico publicado en 2006

Micro X-Ray Computed Tomography Mass Loss Assessment of Different UHMWPE: A Hip Joint Simulator Study on Standard vs. Cross-Linked Polyethylene

artículo científico publicado en 2017

Microseparation and stripe wear in alumina-on-alumina hip implants

artículo científico publicado en 2011

Mixed oxides prosthetic ceramic ball heads. Part 1: effect of the ZrO2 fraction on the wear of ceramic on polythylene joints

artículo científico publicado en 1999

Mixed oxides prosthetic ceramic ball heads. Part 3: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro wear study.

artículo científico publicado en 2001

Mixed-oxides prosthetic ceramic ball heads. Part 2: effect of the ZrO2 fraction on the wear of ceramic on ceramic joints

artículo científico publicado en 1999

Mixing and matching in ceramic-on-metal hip arthroplasty: an in-vitro hip simulator study

artículo científico publicado en 2009

Mobile or fixed unicompartmental knee prostheses? In-vitro wear assessments to solve this dilemma.

artículo científico publicado en 2011

Mobile-bearing total knee arthroplasty: a full traumatic rotation of 180°.

artículo científico publicado en 2013

New Challenges in Tribology: Wear Assessment Using 3D Optical Scanners

artículo científico publicado en 2017

On the roughness measurement on knee prostheses.

artículo científico publicado en 2014

Polyethylene insert damage in unicondylar knee replacement: a comparison of in vivo function and in vitro simulation.

artículo científico publicado en 2010

Pre-clinical validation of joint prostheses: a systematic approach

artículo científico publicado en 2008

Predictive role of the lambda ratio in the evaluation of metal-on-metal total hip replacement.

artículo científico publicado en 2008

Progression of osteoarthritis and reoperation in unicompartmental knee arthroplasty: A comparison of national joint registries

scientific article published on 30 September 2019

Quantification of Wear and Deformation in Different Configurations of Polyethylene Acetabular Cups Using Micro X-ray Computed Tomography

artículo científico publicado en 2017

Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases

artículo científico publicado en 2016

Raman and Photoemission Spectroscopic Analyses of Explanted Biolox® Delta Femoral Heads Showing Metal Transfer

artículo científico publicado en 2017

Registry study on failure incidence in 1,127 revised hip implants with stem trunnion re-use after 10 years of follow-up: limited influence of an adapter sleeve

scientific article published on 18 June 2019

Reliability assessment in advanced nanocomposite materials for orthopaedic applications.

artículo científico publicado en 2010

Retrieval analysis of three generations of Biolox® femoral heads: spectroscopic and SEM characterisation

artículo científico publicado en 2012

Sodium-azide versus ProClin 300: influence on the morphology of UHMWPE particles generated in laboratory tests.

artículo científico publicado en 2004

Surface characterization and debris analysis of ceramic pairings after ten million cycles on a hip joint simulator

artículo científico publicado en 2002

The biomaterials challenge: A comparison of polyethylene wear using a hip joint simulator.

artículo científico publicado en 2015

The performance of gamma- and EtO-sterilised UHMWPE acetabular cups tested under severe simulator conditions. Part 2: wear particle characteristics with isolation protocols.

artículo científico publicado en 2003

The performance of gamma- and EtO-sterilised UHWMPE acetabular cups tested under severe simulator conditions. Part 1: role of the third-body wear process.

artículo científico publicado en 2002

The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints.

artículo científico publicado en 2006

Thermomechanical analysis of ultra-high molecular weight polyethylene-metal hip prostheses.

artículo científico publicado en 2007

Toward the interpretation of the combined effect of size and body weight on the tribological performance of total knee prostheses.

artículo científico publicado en 2014

Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review

artículo científico publicado en 2017

Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods.

artículo científico publicado en 2008

Wear Behaviours and Oxidation Effects on Different UHMWPE Acetabular Cups Using a Hip Joint Simulator

artículo científico publicado en 2018

Wear Distribution Detection of Knee Joint Prostheses by Means of 3D Optical Scanners

artículo científico publicado en 2017

Wear Simulation of Ceramic-on-Crosslinked Polyethylene Hip Prostheses: A New Non-Oxide Silicon Nitride versus the Gold Standard Composite Oxide Ceramic Femoral Heads

artículo científico publicado en 2020

Wear behaviour in total ankle replacement: a comparison between an in vitro simulation and retrieved prostheses.

artículo científico publicado en 2009

Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions.

artículo científico publicado en 2005

Wear of Metal-on-Metal Hip Bearings: Metallurgical Considerations after Hip Simulator Studies ⬇️

artículo científico publicado el 1 de diciembre de 2011

Wear performance of neat and vitamin E blended highly cross-linked PE under severe conditions: The combined effect of accelerated ageing and third body particles during wear test.

artículo científico publicado en 2016

Wear simulation of total knee prostheses using load and kinematics waveforms from stair climbing.

artículo científico publicado en 2015

Lista de obras de Saverio Affatato

A Critical Analysis of TKR In Vitro Wear Tests Considering Predicted Knee Joint Loads

A computerized system for radiographical evaluation in total hip arthroplasty

A new protocol for wear testing of total knee prostheses from real joint kinematic data: Towards a scenario of realistic simulations of daily living activities.

A new protocol from real joint motion data for wear simulation in total knee arthroplasty: stair climbing.

Advanced nanocomposite materials for orthopaedic applications. I. A long-term in vitro wear study of zirconia-toughened alumina.

Alumina-on-alumina hip implants: A wear study of retrieved components

An easy technique to digest and isolate UHMWPE wear particles from a hip joint simulator.

An in vitro investigation of diamond-like carbon as a femoral head coating

Bi-unicondylar knee prosthesis functional assessment utilizing force-control wear testing

Bi-unicondylar knee replacement laxity with changes to simulated soft tissue constraints

Burst Strength of BIOLOX®delta Femoral Heads and Its Dependence on Low-Temperature Environmental Degradation

Ceramic-on-metal for total hip replacement: mixing and matching can lead to high wear

Combined effect of the body mass index and implant size on the wear of retrieved total knee prostheses.

Combined wear behavior and long-term implant-bone fixation of total knee replacement: a novel in vitro set-up.

Comparison of Meshing Strategies in THR Finite Element Modelling

Development of a Novel in Silico Model to Investigate the Influence of Radial Clearance on the Acetabular Cup Contact Pressure in Hip Implants

Displacement or Force Control Knee Simulators? Variations in Kinematics and in Wear

Does cyclic stress and accelerated ageing influence the wear behavior of highly crosslinked polyethylene?

Does the Hirsch Index Improve Research Quality in the Field of Biomaterials? A New Perspective in the Biomedical Research Field

Does the addition of vitamin E to conventional UHMWPE improve the wear performance of hip acetabular cups? Micro-Raman characterization of differently processed polyethylene acetabular cups worn on a hip joint simulator

Does the body mass index influence the long-term survival of unicompartmental knee prostheses? A retrospective multi-centre study

Double-Incision Approach and Early Rehabilitation in a Complicated Bicondylar Tibial Plateau Fracture: A Case Report ⬇️

Effect of head surface roughness and sterilization on wear of UHMWPE acetabular cups.

Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking

How to measure wear following total hip arthroplasty.

In Silico Optimization of Femoral Fixator Position and Configuration by Parametric CAD Model

In Vitro versus In Vivo Phase Instability of Zirconia-Toughened Alumina Femoral Heads: A Critical Comparative Assessment.

In vitro effects on mobile polyethylene insert under highly demanding daily activities: stair climbing.

In vitro wear performance of standard, crosslinked, and vitamin-E-blended UHMWPE

Integrated friction measurements in hip wear simulations: short-term results

Is ceramic-on-ceramic squeaking phenomenon reproducible in vitro? A long-term simulator study under severe conditions

Is micro-computed tomography useful for wear assessment of ceramic femoral heads? A preliminary evaluation of volume measurements.

Knee Wear Assessment: 3D Scanners Used as a Consolidated Procedure

Leg length measurement: a new method to assure the correct leg length in total hip arthroplasty.

Materials for Hip Prostheses: A Review of Wear and Loading Considerations

May the surface roughness of the retrieved femoral head influence the wear behavior of the polyethylene liner?

Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator.

Micro X-Ray Computed Tomography Mass Loss Assessment of Different UHMWPE: A Hip Joint Simulator Study on Standard vs. Cross-Linked Polyethylene

Microseparation and stripe wear in alumina-on-alumina hip implants

Mixed oxides prosthetic ceramic ball heads. Part 1: effect of the ZrO2 fraction on the wear of ceramic on polythylene joints

Mixed oxides prosthetic ceramic ball heads. Part 3: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro wear study.

Mixed-oxides prosthetic ceramic ball heads. Part 2: effect of the ZrO2 fraction on the wear of ceramic on ceramic joints

Mixing and matching in ceramic-on-metal hip arthroplasty: an in-vitro hip simulator study

Mobile or fixed unicompartmental knee prostheses? In-vitro wear assessments to solve this dilemma.

Mobile-bearing total knee arthroplasty: a full traumatic rotation of 180°.

New Challenges in Tribology: Wear Assessment Using 3D Optical Scanners

On the roughness measurement on knee prostheses.

Polyethylene insert damage in unicondylar knee replacement: a comparison of in vivo function and in vitro simulation.

Pre-clinical validation of joint prostheses: a systematic approach

Predictive role of the lambda ratio in the evaluation of metal-on-metal total hip replacement.

Progression of osteoarthritis and reoperation in unicompartmental knee arthroplasty: A comparison of national joint registries

Quantification of Wear and Deformation in Different Configurations of Polyethylene Acetabular Cups Using Micro X-ray Computed Tomography

Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases

Raman and Photoemission Spectroscopic Analyses of Explanted Biolox® Delta Femoral Heads Showing Metal Transfer

Registry study on failure incidence in 1,127 revised hip implants with stem trunnion re-use after 10 years of follow-up: limited influence of an adapter sleeve

Reliability assessment in advanced nanocomposite materials for orthopaedic applications.

Retrieval analysis of three generations of Biolox® femoral heads: spectroscopic and SEM characterisation

Sodium-azide versus ProClin 300: influence on the morphology of UHMWPE particles generated in laboratory tests.

Surface characterization and debris analysis of ceramic pairings after ten million cycles on a hip joint simulator

The biomaterials challenge: A comparison of polyethylene wear using a hip joint simulator.

The performance of gamma- and EtO-sterilised UHMWPE acetabular cups tested under severe simulator conditions. Part 2: wear particle characteristics with isolation protocols.

The performance of gamma- and EtO-sterilised UHWMPE acetabular cups tested under severe simulator conditions. Part 1: role of the third-body wear process.

The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints.

Thermomechanical analysis of ultra-high molecular weight polyethylene-metal hip prostheses.

Toward the interpretation of the combined effect of size and body weight on the tribological performance of total knee prostheses.

Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review

Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods.

Wear Behaviours and Oxidation Effects on Different UHMWPE Acetabular Cups Using a Hip Joint Simulator

Wear Distribution Detection of Knee Joint Prostheses by Means of 3D Optical Scanners

Wear Simulation of Ceramic-on-Crosslinked Polyethylene Hip Prostheses: A New Non-Oxide Silicon Nitride versus the Gold Standard Composite Oxide Ceramic Femoral Heads

Wear behaviour in total ankle replacement: a comparison between an in vitro simulation and retrieved prostheses.

Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions.

Wear of Metal-on-Metal Hip Bearings: Metallurgical Considerations after Hip Simulator Studies ⬇️

Wear performance of neat and vitamin E blended highly cross-linked PE under severe conditions: The combined effect of accelerated ageing and third body particles during wear test.

Wear simulation of total knee prostheses using load and kinematics waveforms from stair climbing.