Lista de obras - Alain Celzard - Dominio Público Uruguay

2-Steps KOH activation of rice straw: an efficient method for preparing high-performance activated carbons.

artículo científico publicado en 2009

A new method for measuring the thermal conductivity of small insulating samples

scientific article published on 01 May 2019

Activation of biomass-derived charcoal with supercritical water

Adsorption by Carbon Gels

Advances in tailoring the porosity of tannin-based carbon xerogels

scholarly article in Industrial Crops and Products, vol. 82, April 2016

An Enhanced Carbon Capture and Storage Process (e-CCS) Applied to Shallow Reservoirs Using Nanofluids Based on Nitrogen-Rich Carbon Nanospheres

scientific article published on 28 June 2019

Arsenic removal by iron-doped activated carbons prepared by ferric chloride forced hydrolysis

artículo científico publicado en 2009

Auto-Crosslinked Rigid Foams Derived from Biorefinery Byproducts

artículo científico publicado en 2018

Bimodal activated carbons derived from resorcinol-formaldehyde cryogels

scientific article published on 03 May 2011

Biopolymer-based nanocomposites: effect of lignin acetylation in cellulose triacetate films

artículo científico publicado en 2011

Biopolymers-based nanocomposites: Membranes from propionated lignin and cellulose for water purification

Broadband Dielectric Spectroscopy of Composites Filled With Various Carbon Materials

article

Characterization of multi-walled carbon nanotube dispersion in resorcinol–formaldehyde aerogels

Closed-cell carbon foams from diphenolic acid-based polybenzoxazine

scholarly article in Carbon, vol. 95, December 2015

Comparison of the thermal, dynamic mechanical and morphological properties of PLA-Lignin & PLA-Tannin particulate green composites

Conversion of Natural Tannin to Hydrothermal and Graphene-Like Carbons Studied by Wide-Angle X-ray Scattering

artículo científico publicado en 2015

Corrigendum to “Characterization of multi-walled carbon nanotube dispersion in resorcinol–formaldehyde aerogels” [Micropor. Mesopor. Mater. 184 (2014) 97–104]

scholarly article published in Microporous and Mesoporous Materials

Detection of Lung Cancer Bio-markers in Human Breath Using a Micro-fabricated Air Analyzer

Dielectric properties and electrical conductivity of flat micronic graphite/polyurethane composites

article

Dielectric properties of graphite-based epoxy composites

article

Direct synthesis of ordered mesoporous polymer and carbon materials by a biosourced precursor

Effect of Meso vs Macro Size of Hierarchical Porous Silica on the Adsorption and Activity of Immobilized β-Galactosidase

artículo científico publicado en 2017

Effect of the adsorption pH and temperature on the parameters of the Brouers-Sotolongo models

scientific article published on 17 December 2018

Electromagnetic Properties of Carbon Gels

artículo científico publicado en 2019

Electromagnetic shielding efficiency in Ka-band: carbon foam versus epoxy/carbon nanotube composites

article

Enhanced resolution of ultra micropore size determination of biochars and activated carbons by dual gas analysis using N2 and CO2 with 2D-NLDFT adsorption models

scholarly article in Carbon, vol. 144, April 2019

Epoxy resin/carbon black composites below the percolation threshold.

artículo científico publicado en 2013

Exploiting the adsorption of simple gases O2 and H2 with minimal quadrupole moments for the dual gas characterization of nanoporous carbons using 2D-NLDFT models

artículo científico publicado en 2020

FE simulation of repaired timber beams under tensile load using CFRP patches

Finite element simulation of nanoindentation tests using a macroscopic computational model

Graphene-like structure of activated anthracites

artículo científico publicado en 2012

High added-value products from the hydrothermal carbonisation of olive stones.

artículo científico publicado en 2016

High-performances carbonaceous adsorbents for hydrogen storage

Highly mesoporous organic aerogels derived from soy and tannin

Highly porous conducting carbon foams for electromagnetic applications

article

Hollow Superparamagnetic Microballoons from Lifelike, Self-Directed Pickering Emulsions Based on Patchy Nanoparticles.

artículo científico publicado en 2016

Hollow carbon spheres, synthesis and applications – a review

article

Hydrothermal Treatment of Tannin: A Route to Porous Metal Oxides and Metal/Carbon Hybrid Materials

Imprinting isolated single iron atoms onto mesoporous silica by templating with metallosurfactants

artículo científico publicado en 2020

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures

Kinetics of the hydrothermal treatment of tannin for producing carbonaceous microspheres.

artículo científico publicado en 2013

Latest progresses in the preparation of tannin-based cellular solids

Lignin-Based Carbon Nanofibers as Electrodes for Vanadium Redox Couple Electrochemistry

artículo científico publicado en 2019

Lipid-coated mesoporous silica microparticles for the controlled delivery of β-galactosidase into intestines

artículo científico publicado en 2018

Measuring and understanding radon adsorption in microporous materials

Mechanical properties of heat-treated organic foams

Multifunctional porous solids derived from tannins

New families of carbon gels based on natural resources

Numerical studies of the effects of process conditions on the development of the porous structure of adsorbents prepared by chemical activation of lignin with alkali hydroxides

artículo científico publicado en 2016

Ordered mesoporous carbons obtained by soft-templating of tannin in mild conditions

PLA with Intumescent System Containing Lignin and Ammonium Polyphosphate for Flame Retardant Textile

artículo científico publicado en 2016

Polycondensation Resins by Flavonoid Tannins Reaction with Amines.

artículo científico publicado en 2017

Rice straw as precursor of activated carbons: activation with ortho-phosphoric acid.

artículo científico publicado en 2010

Selection and characterization of adsorbents for the analysis of an explosive-related molecule traces in the air

Shielding effects in thin films of carbon nanotubes within microwave range

Structural Characterisation and Chemical Stability of Commercial Fibrous Carbons in Molten Lithium Salts

artículo científico publicado en 2019

Structure and Electromagnetic Properties of Cellular Glassy Carbon Monoliths with Controlled Cell Size

artículo científico publicado en 2018

Structure and electrochemical properties of carbon nanostructures derived from nickel(II) and iron(II) phthalocyanines

artículo científico publicado en 2019

Synthesis of perfectly ordered mesoporous carbons by water-assisted mechanochemical self-assembly of tannin

article published in 2018

Synthesis, characterization and performance in arsenic removal of iron-doped activated carbons prepared by impregnation with Fe(III) and Fe(II)

artículo científico publicado en 2008

Systematic studies of tannin-formaldehyde aerogels: preparation and properties

artículo científico publicado en 2013

Tannin-based rigid foams: a survey of chemical and physical properties.

artículo científico publicado en 2009

Tetracycline adsorption onto activated carbons produced by KOH activation of tyre pyrolysis char.

artículo científico publicado en 2016

The severity factor as a useful tool for producing hydrochars and derived carbon materials.

artículo científico publicado en 2017

Towards a feasible and scalable production of bio-xerogels

artículo científico publicado en 2015

Lista de obras de Alain Celzard

2-Steps KOH activation of rice straw: an efficient method for preparing high-performance activated carbons.

A new method for measuring the thermal conductivity of small insulating samples

Activation of biomass-derived charcoal with supercritical water

Adsorption by Carbon Gels

Advances in tailoring the porosity of tannin-based carbon xerogels

An Enhanced Carbon Capture and Storage Process (e-CCS) Applied to Shallow Reservoirs Using Nanofluids Based on Nitrogen-Rich Carbon Nanospheres

Arsenic removal by iron-doped activated carbons prepared by ferric chloride forced hydrolysis

Auto-Crosslinked Rigid Foams Derived from Biorefinery Byproducts

Bimodal activated carbons derived from resorcinol-formaldehyde cryogels

Biopolymer-based nanocomposites: effect of lignin acetylation in cellulose triacetate films

Biopolymers-based nanocomposites: Membranes from propionated lignin and cellulose for water purification

Broadband Dielectric Spectroscopy of Composites Filled With Various Carbon Materials

Characterization of multi-walled carbon nanotube dispersion in resorcinol–formaldehyde aerogels

Closed-cell carbon foams from diphenolic acid-based polybenzoxazine

Comparison of the thermal, dynamic mechanical and morphological properties of PLA-Lignin & PLA-Tannin particulate green composites

Conversion of Natural Tannin to Hydrothermal and Graphene-Like Carbons Studied by Wide-Angle X-ray Scattering

Corrigendum to “Characterization of multi-walled carbon nanotube dispersion in resorcinol–formaldehyde aerogels” [Micropor. Mesopor. Mater. 184 (2014) 97–104]

Detection of Lung Cancer Bio-markers in Human Breath Using a Micro-fabricated Air Analyzer

Dielectric properties and electrical conductivity of flat micronic graphite/polyurethane composites

Dielectric properties of graphite-based epoxy composites

Direct synthesis of ordered mesoporous polymer and carbon materials by a biosourced precursor

Effect of Meso vs Macro Size of Hierarchical Porous Silica on the Adsorption and Activity of Immobilized β-Galactosidase

Effect of the adsorption pH and temperature on the parameters of the Brouers-Sotolongo models

Electromagnetic Properties of Carbon Gels

Electromagnetic shielding efficiency in Ka-band: carbon foam versus epoxy/carbon nanotube composites

Enhanced resolution of ultra micropore size determination of biochars and activated carbons by dual gas analysis using N2 and CO2 with 2D-NLDFT adsorption models

Epoxy resin/carbon black composites below the percolation threshold.

Exploiting the adsorption of simple gases O2 and H2 with minimal quadrupole moments for the dual gas characterization of nanoporous carbons using 2D-NLDFT models

FE simulation of repaired timber beams under tensile load using CFRP patches

Finite element simulation of nanoindentation tests using a macroscopic computational model

Graphene-like structure of activated anthracites

High added-value products from the hydrothermal carbonisation of olive stones.

High-performances carbonaceous adsorbents for hydrogen storage

Highly mesoporous organic aerogels derived from soy and tannin

Highly porous conducting carbon foams for electromagnetic applications

Hollow Superparamagnetic Microballoons from Lifelike, Self-Directed Pickering Emulsions Based on Patchy Nanoparticles.

Hollow carbon spheres, synthesis and applications – a review

Hydrothermal Treatment of Tannin: A Route to Porous Metal Oxides and Metal/Carbon Hybrid Materials

Imprinting isolated single iron atoms onto mesoporous silica by templating with metallosurfactants

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures

Kinetics of the hydrothermal treatment of tannin for producing carbonaceous microspheres.

Latest progresses in the preparation of tannin-based cellular solids

Lignin-Based Carbon Nanofibers as Electrodes for Vanadium Redox Couple Electrochemistry

Lipid-coated mesoporous silica microparticles for the controlled delivery of β-galactosidase into intestines

Measuring and understanding radon adsorption in microporous materials

Mechanical properties of heat-treated organic foams

Multifunctional porous solids derived from tannins

New families of carbon gels based on natural resources

Numerical studies of the effects of process conditions on the development of the porous structure of adsorbents prepared by chemical activation of lignin with alkali hydroxides

Ordered mesoporous carbons obtained by soft-templating of tannin in mild conditions

PLA with Intumescent System Containing Lignin and Ammonium Polyphosphate for Flame Retardant Textile

Polycondensation Resins by Flavonoid Tannins Reaction with Amines.

Rice straw as precursor of activated carbons: activation with ortho-phosphoric acid.

Selection and characterization of adsorbents for the analysis of an explosive-related molecule traces in the air

Shielding effects in thin films of carbon nanotubes within microwave range

Structural Characterisation and Chemical Stability of Commercial Fibrous Carbons in Molten Lithium Salts

Structure and Electromagnetic Properties of Cellular Glassy Carbon Monoliths with Controlled Cell Size

Structure and electrochemical properties of carbon nanostructures derived from nickel(II) and iron(II) phthalocyanines

Synthesis of perfectly ordered mesoporous carbons by water-assisted mechanochemical self-assembly of tannin

Synthesis, characterization and performance in arsenic removal of iron-doped activated carbons prepared by impregnation with Fe(III) and Fe(II)

Systematic studies of tannin-formaldehyde aerogels: preparation and properties

Tannin-based rigid foams: a survey of chemical and physical properties.

Tetracycline adsorption onto activated carbons produced by KOH activation of tyre pyrolysis char.

The severity factor as a useful tool for producing hydrochars and derived carbon materials.

Towards a feasible and scalable production of bio-xerogels