Filtros de búsqueda

Lista de obras de Suprakas Sinha Ray

A Review on Melt-State Viscoelastic Properties of Polymer Nanocomposites

artículo científico publicado el 1 de octubre de 2011

A comparison of purification procedures for multi-walled carbon nanotubes produced by chemical vapour deposition

artículo científico publicado en 2009

A facile route for the synthesis of poly(N-vinylcarbazole)/manganese sulphide quantum dots nanocomposites with enhanced optical properties

artículo científico publicado en 2008

A highly responsive NH3 sensor based on Pd-loaded ZnO nanoparticles prepared via a chemical precipitation approach

scientific article published on 08 July 2019

A noble additive cum compatibilizer for dispersion of nanoclay into ethylene octene elastomer

A novel approach to low-temperature synthesis of cubic HfO2 nanostructures and their cytotoxicity.

artículo científico publicado en 2017

A special issue on polymer nanocomposites

artículo científico publicado en 2008

A study on the adsorption of methylene blue onto gum ghatti/TiO2 nanoparticles-based hydrogel nanocomposite

artículo científico publicado en 2016

Achieving Controllable MoS2 Nanostructures with Increased Interlayer Spacing for Efficient Removal of Pb(II) from Aquatic Systems

scientific article published on 14 May 2019

Adsorption of methyl violet from aqueous solution using gum xanthan/Fe3O4 based nanocomposite hydrogel.

artículo científico publicado en 2016

Apoptotic efficacy of multifaceted biosynthesized silver nanoparticles on human adenocarcinoma cells

scientific article published in Scientific Reports

Biodegradable polylactide/montmorillonite nanocomposites

artículo científico publicado en 2003

Biodegradation and bioresorption of poly(ɛ-caprolactone) nanocomposite scaffolds

artículo científico publicado en 2015

Bionanohybrid Based on Bioplastic and Surface-Functionalized Carbon Nanotubes

artículo científico publicado el 1 de diciembre de 2010

Catalytic activity and structure properties of doped VOHPO4 x 0.5H2O with nanosized Ru, Au, Fe and Mn in benzene hydroxylation.

artículo científico publicado en 2013

Cellulose Nanostructure-Based Biodegradable Nanocomposite Foams: A Brief Overview on the Recent Advancements and Perspectives

artículo científico publicado en 2019

Characterisation and thermal properties of titanium dioxide nanoparticles-containing biodegradable polylactide composites synthesized by sol-gel method.

artículo científico publicado en 2014

CoS-carbon nanotube heterostructure: one-step synthesis and optical properties

scientific article published on 01 July 2010

Composite films of arabinoxylan and fibrous sepiolite: morphological, mechanical, and barrier properties

artículo científico publicado en 2012

Conducting nanocomposites of poly(N-vinylcarbazole) with single-walled carbon nanotubes

artículo científico publicado en 2008

Contributor contact details

artículo científico publicado en 2012

DFT Studies of Low Concentration Substitutional Doping of Transition-Metals on Single-Walled Carbon Nanotube Surface

artículo científico publicado el 1 de diciembre de 2010

Design of Poly(cyclotriphosphazene)-Functionalized Zirconium Phosphate Nanoplatelets To Simultaneously Enhance the Dynamic Mechanical and Flame Retardancy Properties of Polyamide 6

scientific article published on 01 June 2020

Designing SnO2 Nanostructure-Based Sensors with Tailored Selectivity toward Propanol and Ethanol Vapors

artículo científico publicado en 2019

Development of a reduced-graphene-oxide based superparamagnetic nanocomposite for the removal of nickel (II) from an aqueous medium via a fluorescence sensor platform.

artículo científico publicado en 2015

Dielectric Properties of Polyaniline-Montmorillonite Clay Hybrids

artículo científico publicado el 1 de marzo de 2013

Dispersion characteristics and properties of poly(methyl methacrylate)/multi-walled carbon nanotubes nanocomposites.

artículo científico publicado en 2007

Dispersion of multi-walled carbon nanotubes in biodegradable poly(butylene succinate) matrix.

artículo científico publicado en 2006

Effect of Organoclay on the Orientation and Thermal Properties of Liquid-Crystalline

Effect of Oxygen Doping on Electrical Properties of Small Radius (2, 1) Single-Walled Carbon Nanotubes

artículo científico publicado el 1 de julio de 2010

Effect of nanoclay loading on the thermal and mechanical properties of biodegradable polylactide/poly[(butylene succinate)-co-adipate] blend composites.

artículo científico publicado en 2012

Effective removal of cationic dyes from aqueous solution using gum ghatti-based biodegradable hydrogel.

artículo científico publicado en 2015

Effects of stearic acid and irradiation alone and in combination on properties of amylose-lipid nanomaterial from high amylose maize starch

scientific article published on 20 February 2019

Efficient Removal of Pb(II) and Cd(II) from Industrial Mine Water by a Hierarchical MoS2/SH-MWCNT Nanocomposite

artículo científico publicado en 2019

Enzymatic degradation behavior of nanoclay reinforced biodegradable PLA/PBSA blend composites.

artículo científico publicado en 2015

Fabrication of Bimetal CuFe2O4 Oxide Redox-Active Nanocatalyst for Oxidation of Pinene to Renewable Aroma Oxygenates

scientific article published on 09 August 2019

Field Emission Characteristics ofSnO2/CNTs Composites Prepared by Microwave-Assisted Wet Impregnation

Heterostructured CeO2-M (M = Co, Cu, Mn, Fe, Ni) Oxide Nanocatalysts for the Visible-Light Photooxidation of Pinene to Aroma Oxygenates

scientific article published on 23 April 2020

Hierarchically Porous Cu-, Co-, and Mn-Doped Platelet-Like ZnO Nanostructures and Their Photocatalytic Performance for Indoor Air Quality Control

artículo científico publicado en 2019

Highly efficient inactivation of bacteria found in drinking water using chitosan-bentonite composites: Modelling and breakthrough curve analysis

artículo científico publicado en 2017

Inducing PLA/starch compatibility through butyl-etherification of waxy and high amylose starch

article

Influence of Selectively Localised Nanoclay Particles on Non-Isothermal Crystallisation and Degradation Behaviour of PP/LDPE Blend Composites

scientific article published on 28 February 2018

Intercalation of Nb2O5 nano-flowers into the walls of few-layer black phosphorus creating a heterostructure of FL-BP@Nb2O5 with the potential for environmental application

artículo científico publicado en 2020

Intercalation/Exfoliation mechanism of hybrid formation in polypropylene/lamellar mesostructured silica nanocomposites

artículo científico publicado en 2006

Isolation and characterisation of nanoparticles from tef and maize starch modified with stearic acid.

artículo científico publicado en 2017

Kinetic models for the release of the anticancer drug doxorubicin from biodegradable polylactide/metal oxide-based hybrids

artículo científico publicado en 2014

Layered Double Hydroxide-Based Functional Nanohybrids as Controlled Release Carriers of Pharmaceutically Active Ingredients

artículo científico publicado en 2018

Materials Science Challenges in Skin UV Protection: A Review

artículo científico publicado en 2019

Mechanism of Thermal Degradation-Induced Gel Formation in Polyamide 6/Ethylene Vinyl Alcohol Blend Nanocomposites Studied by Time-Resolved Rheology and Hyphenated Thermogravimetric Analyzer Fourier Transform Infrared Spectroscopy Mass Spectroscopy:

scientific article published on 31 May 2019

Microstructure Development and Its Influence on the Properties of Styrene-Ethylene-Butylene-Styrene/Polystyrene Blends

scientific article published on 04 April 2018

Microwave-assisted synthesis, characterization and antibacterial activity of Ag/ZnO nanoparticles supported bentonite clay

artículo científico publicado en 2013

Modification of gum ghatti via grafting with acrylamide and analysis of its flocculation, adsorption, and biodegradation properties.

artículo científico publicado en 2018

Molecular Dynamics Simulation Studies of Structural and Mechanical Properties of Single-Walled Carbon Nanotubes

artículo científico publicado el 1 de diciembre de 2010

Morphological, dielectric and electrical conductivity characteristics of clay-containing nanohybrids of poly(N-vinyl carbazole) and polypyrrole

scientific article published on 01 October 2012

Morphology and properties of core-shell nanocomposites of poly(N-vinylcarbazole) with multi-walled carbon nanotubes

artículo científico publicado en 2009

Multifunctional Nanobiocomposite of Poly[(butylene succinate)-co-adipate] and Clay

artículo científico publicado en 2015

Nafion Titania Nanotubes Nanocomposite Electrolytes for High-Temperature Direct Methanol Fuel Cells

article published in 2012

New poly(butylene succinate)/layered silicate nanocomposites: preparation and mechanical properties

artículo científico publicado en 2002

Nitrogen-doped carbon nanotubes as a metal catalyst support

Nonisothermal crystallization kinetics of poly(ethylene terephthalate) nanocomposites

artículo científico publicado en 2008

Occurrence of amylose-lipid complexes in teff and maize starch biphasic pastes

artículo científico publicado en 2012

Optical Properties of Nanoparticles and Nanocomposites

Optical and Morphological Properties of ZnO- and TiO2-Derived Nanostructures Synthesized via a Microwave-Assisted Hydrothermal Method

Optical constants correlated electrons-spin of micro doughnuts of Mn-doped ZnO films

Orientation-dependent low field magnetic anomalies and room-temperature spintronic material – Mn doped ZnO films by aerosol spray pyrolysis

Parametric Analysis of Electrical Conductivity of Polymer-Composites

artículo científico publicado en 2019

Photocatalytic degradation of nevirapine with a heterostructure of few-layer black phosphorus coupled with niobium (V) oxide nanoflowers (FL-BP@Nb2O5)

artículo científico publicado en 2020

Photoluminescence and hydrogen gas-sensing properties of titanium dioxide nanostructures synthesized by hydrothermal treatments

artículo científico publicado en 2012

Plastics in municipal drinking water and wastewater treatment plant effluents: challenges and opportunities for South Africa-a review

artículo científico publicado en 2020

Poly(epsilon-caprolactone) nanocomposite scaffolds for tissue engineering: a brief overview

artículo científico

Polyethylene/clay nanocomposites prepared by polymerization compounding method

artículo científico publicado en 2006

Polylactide based nanostructured biomaterials and their applications

artículo científico publicado en 2007

Polylactide-Based Bionanocomposites: A Promising Class of Hybrid Materials

artículo científico publicado el 6 de septiembre de 2012

Polylactide-based Magnetic Spheres as Efficient Carriers for Anticancer Drug Delivery.

artículo científico publicado en 2015

Polymer Nanocomposite Processing, Characterization, and Applications 2012

Polymer Nanocomposite Processing, Characterization, and Applications 2013

article published in 2014

Polypyrrole-coated gum ghatti-grafted poly(acrylamide) composite for the selective removal of hexavalent chromium from waste water

artículo científico publicado en 2020

Polystyrene/TiO2 composite electrospun fibers as fillers for poly(butylene succinate-co-adipate): Structure, morphology and properties

Preparation and characterization of nano-cellulose with new shape from different precursor.

artículo científico publicado en 2013

Preparation and evaluation of quaternary imidazolium-modified montmorillonite for disinfection of drinking water

Preparation and properties of biodegradable films from Sterculia urens short fiber/cellulose green composites.

artículo científico publicado en 2013

Purification of laser synthesized SWCNTs by different methods: a comparative study

artículo científico publicado en 2008

Purification of multi-walled carbon nanotubes

artículo científico publicado en 2008

Purification of single-walled carbon nanotubes

artículo científico publicado en 2007

Recent Progress on the Design and Applications of Polysaccharide-Based Graft Copolymer Hydrogels as Adsorbents for Wastewater Purification

article by Hemant Mittal et al published 11 February 2016 in Macromolecular Materials and Engineering

Recent Trends in the Microwave-Assisted Synthesis of Metal Oxide Nanoparticles Supported on Carbon Nanotubes and Their Applications

article published in 2012

Removal of Congo red from aqueous solution by adsorption using gum ghatti and acrylamide graft copolymer coated with zero valent iron

scientific article published on 22 January 2020

Rheology⁻Microstructure Relationships in Melt-Processed Polylactide/Poly(vinylidene Fluoride) Blends

artículo científico publicado en 2018

Role of Nanoclay Shape and Surface Characteristics on the Morphology and Thermal Properties of Polystyrene Nanocomposites Synthesized via Emulsion Polymerization

Role of Specific Interfacial Area in Controlling Properties of Immiscible Blends of Biodegradable Polylactide and Poly[(butylene succinate)-co-adipate]

artículo científico publicado en 2012

Selective removal of Cr(VI) from aqueous solution by polypyrrole/2,5-diaminobenzene sulfonic acid composite

artículo científico publicado en 2016

Selective removal of toxic Cr(VI) from aqueous solution by adsorption combined with reduction at a magnetic nanocomposite surface

artículo científico publicado en 2017

Self-Healing Polymeric Composite Material Design, Failure Analysis and Future Outlook: A Review

artículo científico publicado en 2017

Structure and properties of highly toughened biodegradable polylactide/ZnO biocomposite films.

artículo científico publicado en 2013

Synthesis and characterization of alginate beads encapsulated zinc oxide nanoparticles for bacteria disinfection in water

artículo científico publicado en 2017

Synthesis and flocculation properties of gum ghatti and poly(acrylamide-co-acrylonitrile) based biodegradable hydrogels

artículo científico publicado en 2014

Synthesis of nanomaterials by continuous-flow microfluidics: a review

artículo científico publicado en 2014

The Distribution of Nanoclay Particles at the Interface and Their Influence on the Microstructure Development and Rheological Properties of Reactively Processed Biodegradable Polylactide/Poly(butylene succinate) Blend Nanocomposites

artículo científico publicado en 2017

The Role of Two-Step Blending in the Properties of Starch/Chitin/Polylactic Acid Biodegradable Composites for Biomedical Applications

artículo científico publicado en 2020

The Study on the Time Dependency and the Stability of Cobalt Sulphide Nanoparticles Under an Electron Beam

artículo científico publicado el 1 de septiembre de 2010

The adsorption of Pb2+ and Cu2+ onto gum ghatti-grafted poly(acrylamide-co-acrylonitrile) biodegradable hydrogel: isotherms and kinetic models.

artículo científico publicado en 2015

The effect of starch amylose content on the morphology and properties of melt-processed butyl-etherified starch/poly[(butylene succinate)-co-adipate] blends

artículo científico publicado en 2016

The state of the art proton exchange membrane fuel cells for clean energy

Thermal Degradation Characteristic and Flame Retardancy of Polylactide-Based Nanobiocomposites

artículo científico publicado en 2018

Thermal Stability, Pyrolysis Behavior, and Fire-Retardant Performance of Melamine Cyanurate@Poly(cyclotriphosphazene-co-4,4'-sulfonyl diphenol) Hybrid Nanosheet-Containing Polyamide 6 Composites

scientific article published on 03 June 2019

Thermal and rheological properties of biodegradable poly[(butylene succinate)-co-adipate] nanocomposites.

artículo científico publicado en 2010

Thermal and thermomechanical properties of poly(butylene succinate) nanocomposites

artículo científico publicado en 2008

Toughening of biodegradable polylactide/poly(butylene succinate-co-adipate) blends via in situ reactive compatibilization.

artículo científico publicado en 2013

Viscoelastic Properties of Poly[(butylene succinate)-co-adipate] Nanocomposites

artículo científico publicado en 2015

Zinc oxide epitaxial thin film deposited over carbon on various substrate by pulsed laser deposition technique.

artículo científico publicado en 2010