A Boundary Lubrication Friction Model Sensitive to Detailed Engine Oil Formulation in an Automotive Cam/Follower Interface

article

A bubbly oil-lubricated squeeze film damper. Part 1: A finite-element model

A two-phase flow approach to cavitation modelling in journal bearings

Analysis of piston assembly friction using the indicated mean effective pressure experimental method to validate mathematical models

journal article

Analysis of the Piston Assembly, Bore Distortion and Future Developments

Automobile engine tribology — approaching the surface

Automotive Tribology

Boundary lubrication film formation from belt type CVT fluids

Boundary lubrication film formation from phosphorus antiwear additives with application to metal V-belt type continuously variable transmission lubricants

article

Challenges of simulating ‘fired engine’ ring-liner oil additive/surface interactions in ring-liner bench tribometer

Editorial

Effect of Engine Operating Conditions and Lubricant Rheology on the Distribution of Losses in an Internal Combustion Engine

Effect of cylinder pressure on engine valve-train friction under motored and fired conditions

article published in 2012

Experimental Evaluation of Piston Assembly Friction Under Motored and Fired Conditions in a Gasoline Engine

Experimental Evaluation of Piston-Assembly Friction Under Motored and Fired Conditions in a Gasoline Engine

Experimental and Theoretical Evaluation of Simultaneous Piston Assembly, Valve Train and Engine Bearing Friction in a Fired Engine

Experimental and Theoretical Study of Instantaneous Engine Valve Train Friction

Experimental and Theoretical Study of Instantaneous Piston Assembly Friction in a Gasoline Engine

Experimental simulation of impact and sliding wear in the top piston ring groove of a gasoline engine

Extraction and tribological investigation of top piston ring zone oil from a gasoline engine

FTIR lubricant analysis: Concentration of dispersed sulphuric acid

article published in 2014

Friction Characteristics and Topography of Tribofilms From Anti-Wear Additives Applied to Metal V-Belt Type CVT Fluids

Friction Characteristics and Topography of Tribofilms from Anti-Wear Additives Applied to Metal V-Belt Type CVT Fluids

Friction Modelling in Boundary Lubrication Considering the Effect of MoDTC and ZDDP in Engine Oils

Friction and wear performance of newly developed automotive bearing materials under boundary and mixed lubrication regimes

Friction characteristics between metal contacting surfaces from antiwear additives with application to metal V-belt type continuously variable transmission lubricants

article

Friction modelling in an engine valve train considering the sensitivity to lubricant formulation

Friction modelling of tribofilm performance in a bench tribometer for automotive engine lubricants

Impact of sulphuric acid on cylinder lubrication for large 2-stroke marine diesel engines: Contact angle, interfacial tension and chemical interaction

Introduction

Introduction

Introduction

Introduction

Introduction

Introduction to the 41st Leeds-Lyon Symposium on Tribology, held at Leeds Trinity University in Leeds (UK), September 2014 ⬇️

Investigation of fundamental wear mechanisms at the piston ring and cylinder wall interface in internal combustion engines

Lubrication in refrigeration systems: Numerical model for piston dynamics considering oil-refrigerant interaction

Lubrication of an electroplated nickel matrix silicon carbide coated eutectic aluminium—silicon alloy automotive cylinder bore with an ionic liquid as a lubricant additive

scholarly article by K Mistry et al published March 2009 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Measurement of lubricant flow in a gasoline engine

Metal-metal friction characteristics and the transmission efficiency of a metal V-belt-type continuously variable transmission

article

Physical and Chemical Impact of Sulphuric Acid on Cylinder Lubrication for Large 2-Stroke Marine Diesel Engines

Piston Assembly Friction Losses: Comparison of Measured and Predicted Data

Predictive wear modelling of lubricated piston rings in a diesel engine

Role of friction modifiers on the tribological performance of hypereutectic Al–Si alloy lubricated in boundary conditions

article published in 2011

Simulated fuel dilution and friction-modifier effects on piston ring friction

Simulating the Misting of Lubricant in the Piston Assembly of an Automotive Gasoline Engine: The Effect of Viscosity Modifiers and Other Key Lubricant Components

artículo científico publicado en 2022

Special Issue on Engine Tribology

article published in 2004

Subscale Tribofilm Tribological Modelling in Boundary Lubrication Using Multivariate Analysis

Surface and Tribological Characteristics of Tribofilms Formed in the Boundary Lubrication Regime with Application to Internal Combustion Engines

article

Technique of simultaneous synchronized evaluation of the tribological components of an engine under realistic conditions

The Measurement of Component Friction Losses in a Fired Engine: Part 1 — Experimental Method

The Measurement of Component Friction Losses in a Fired Engine: Part 2 — Experimental Results

The Study of Residence Time and Flow Rate of Lubricating Oil Through the Top Ring Zone of a Gasoline Engine

The potential of plasma electrolytic oxidized eutectic aluminium-silicon alloy as a cylinder wall surface for lightweight engine blocks

The tribological behaviour of carbon fibre reinforced polyaryletherketones (PAEKs) through their glass transitions

Theoretical and experimental evaluation of engine bearing performance

Thin-Film and Marginal Lubrication of Polyetherketone–Steel Sliding Contacts at High Temperature and High Speed

Tribological performance of an Al—Si alloy lubricated in the boundary regime with zinc dialkyldithiophosphate and molybdenum dithiocarbamate additives ⬇️

scholarly article by X Xia et al published March 2008 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Tribological properties of ionic liquids as lubricants and additives. Part 1: Synergistic tribofilm formation between ionic liquids and tricresyl phosphate

Tribometer Investigation of the Frictional Response of Piston Rings when Lubricated with the Separated Phases of Lubricant Contaminated with the Gasoline Engine Biofuel Ethanol and Water

Tribometer investigation of the frictional response of piston rings with lubricant contaminated with the gasoline engine biofuel ethanol and water

ZDDP and MoDTC interactions and their effect on tribological performance – tribofilm characteristics and its evolution

ZDDP and MoDTC interactions in boundary lubrication—The effect of temperature and ZDDP/MoDTC ratio