Filtros de búsqueda

Lista de obras de Albano Cavaleiro

A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2Coatings

A certified reference material for the scratch test

A model for coated surface hardness

A simple model for the deposition of W-O coatings by reactive gas pulsing process

A structural and mechanical analysis on PVD-grown (Ti,Al)N/Mo multilayers

A unique approach to reveal the nanocomposite nc-MN/SiN-layer architecture of thin films via electrical measurements

Additional control of bombardment by deep oscillation magnetron sputtering: Effect on the microstructure and topography of Cr thin films

Adhesion failures on hard coatings induced by interface anomalies

Adsorption of bovine serum albumin on Zr co-sputtered a-C(:H) films: Implication on wear behaviour.

artículo científico publicado en 2014

Ag y :TiN x thin films for dry biopotential electrodes: the effect of composition and structural changes on the electrical and mechanical behaviours

article

Ag+ release and corrosion behavior of zirconium carbonitride coatings with silver nanoparticles for biomedical devices

scholarly article by S. Calderon V. et al published May 2013 in Surface & Coatings Technology

Ag+release inhibition from ZrCN–Ag coatings by surface agglomeration mechanism: structural characterization

Ag:TiN nanocomposite thin films for bioelectrodes: The effect of annealing treatments on the electrical and mechanical behavior

Ag–Ti(C, N)-based coatings for biomedical applications: influence of silver content on the structural properties

An XPS study of Au alloyed Al–O sputtered coatings

Antibacterial Ag/a-C nanocomposite coatings: The influence of nano-galvanic a-C and Ag couples on Ag ionization rates

Au-WO3 Nanocomposite Coatings for Localized Surface Plasmon Resonance Sensing

artículo científico publicado en 2020

Bioactivity response of Ta1-xOx coatings deposited by reactive DC magnetron sputtering.

artículo científico publicado en 2015

Biotribological behavior of Ag–ZrCxN1−x coatings against UHMWPE for joint prostheses devices

artículo científico publicado en 2014

Broadband Optical Absorption Caused by the Plasmonic Response of Coalesced Au Nanoparticles Embedded in a TiO2 Matrix

Can WSeC Coatings Be Competitive to WSC Ones?

Characterisation of Ti1−xSixNy nanocomposite films

Characterization of W–Ge–N coatings deposited by sputtering

Characterization of W–O coatings deposited by magnetron sputtering with reactive gas pulsing

Characterization of a sputtered amorphous WCCo coating annealed in air

Characterization of magnetron co-sputtered W-doped C-based films

Chemical and optical characterization of NiP spectrally selective surfaces coated by fluorocarbon films

Chemical and physical characterization of C(N)-doped W–S sputtered films

article by A. Nossa & Albano Cavaleiro published August 2004 in Journal of Materials Research

Chemical and structural characterization of ZrCNAg coatings: XPS, XRD and Raman spectroscopy

article published in 2015

Comparative study of the tribological behavior of self-lubricating W–S–C and Mo–Se–C sputtered coatings

Comparison of Structural and Electrical Properties of Barium Zirconate Pellets and Thin Films

Comparison of Structural and Electrical Properties of Strontium Zirconate Pellets and Thin Films

Complex frictional analysis of self-lubricant W-S-C/Cr coating

artículo científico publicado en 2012

Corrigendum to “a-C(:H) and a-C(:H)_Zr coatings deposited on biomedical Ti-based substrates: Tribological properties” [Thin Solid Films 538 (2013) 89–96]

scholarly article published in Thin Solid Films

CrN thin films deposited by HiPIMS in DOMS mode

DLC-W coatings tested in combustion engine — Frictional and wear analysis

article published in 2014

Degradation of a C/CrC PVD coating after annealing in Ar+H2at 700°C studied by Raman spectroscopy and transmission electron microscopy

Deposition of TiN-WS2Nanocomposite Coatings by a Hybrid Process: Reactive Sputtering and Clusters Gun

Determination of the sp3 C content of a-C films through EELS analysis in the TEM

Duplex treatment: W–Ti–N sputtered coatings on pre-nitrided low and high alloy steels

EVALUATION OF HARDNESS OF SPUTTERED W–C–Co THIN FILMS

Editorial

Effect of Nb target power on the structure, mechanical properties, thermal stability and oxidation resistance of Cr–Al–Nb–N coatings

Effect of Slight ZnO Addition on the Structural, Morphological and Electrical Properties of Barium Zirconate Pellets

Effect of annealing temperature on the properties of pulsed magnetron sputtered nanocrystalline Ag:SnO2 films

Effect of arc current on microstructure and wear characteristics of a Ni-based coating deposited by PTA on gray cast iron

article by F. Fernandes et al published May 2011 in Surface & Coatings Technology

Effect of clustering on the surface plasmon band in thin films of metallic nanoparticles

Effect of germanium addition on the properties of reactively sputtered ZrN films

article

Effect of peak target power on the properties of Cr thin films sputtered by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode

Effect of rough surface patterning on the tribology of W–S–C–Cr self-lubricant coatings

Effect of the counterface material on the fretting behaviour of sputtered WSiN coatings

Effect of the microstructure on the cutting performance of superhard (Ti,Si,Al)N nanocomposite films

Effect of the substrate dilution on the room and high temperature tribological behaviour of Ni-based coatings deposited by PTA on grey cast iron

article by F. Fernandes et al published November 2015 in Surface & Coatings Technology

Effects of O addition on the thermal behaviour of hard W–N sputtered coatings

article

Effects of carbon content on the high temperature friction and wear of chromium carbonitride coatings

Effects of the morphology and structure on the elastic behavior of (Ti,Si,Al)N nanocomposites

Elastic properties of (Ti,Al,Si)N nanocomposite films

Electrochemical corrosion of magnetron sputtered WTiN-coated mild steels in a chloride medium

Evolution of the microstructure, residual stresses, and mechanical properties of W–Si–N coatings after thermal annealing

Evolution of the surface plasmon resonance of Au:TiO2 nanocomposite thin films with annealing temperature

Ex-vivo studies on friction behaviour of ureteral stent coated with Ag clusters incorporated in a:C matrix

Examination of the tribolayer formation of a self-lubricant W–S–C sputtered coating

article by J.V. Pimentel et al published March 2012 in Tribology International

Experimental development and deposition of nanocomposite films by a hybrid dc magnetron sputtering and cluster gun technique

article

Failure modes observed on worn surfaces of W-C-Co sputtered coatings

Fretting behaviour of W–Si coated steels in vacuum environments

article published in 2006

Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load

Frictional behavior of self-adaptive nanostructural Mo–Se–C coatings in different sliding conditions

Frictional properties of self-adaptive chromium doped tungsten–sulfur–carbon coatings at nanoscale

From Ti–Al- to Ti–Al–N-sputtered 2D materials

Functional and optical properties of Au:TiO2 nanocomposite films: The influence of thermal annealing

Functional properties of ceramic-Ag nanocomposite coatings produced by magnetron sputtering

Grooved surface texturing by electrical discharge machining (EDM) under different lubrication regimes

Hard a-C/DLC coatings on Si3N4–bioglass composites

Hard amorphous Ti–Al–N coatings deposited by sputtering

Hard and dense diamond like carbon coatings deposited by deep oscillations magnetron sputtering

Hardness versus structure in W–Si–N sputtered coatings

High temperature behavior of nanolayered CrAlTiN coating: Thermal stability, oxidation, and tribological properties

High temperature properties of CrAlN, CrAlSiN and AlCrSiN coatings – Structure and oxidation

High temperature properties of the CrNbAlN coatings with increasing Al contents

High temperature tribology of CrN and multilayered Cr/CrN coatings

High-temperature tribological properties of CrAlN, CrAlSiN and AlCrSiN coatings

How can H content influence the tribological behaviour of W-containing DLC coatings

How is the chemical bonding of W–Si–N sputtered coatings?

In situ structural evolution of arc-deposited Cr-based coatings

In-service behaviour of (Ti,Si,Al)Nx nanocomposite films

Indentation and scratch testing of DLC-Zr coatings on ultrafine-grained titanium processed by high-pressure torsion

scholarly article by Chuan Ting Wang et al published August 2013 in Wear

Influence of Ag content on mechanical and tribological behavior of DLC coatings

Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr–Cr–Al–N coatings

Influence of Al on the microstructure and mechanical properties of Cr–Zr–(Al–)N coatings with low and high Zr content

Influence of Al(Er) interlayer on the mechanical properties of AlN(Er) coatings

Influence of Cr additions on the structure and oxidation resistance of multilayered TiAlCrN films

article

Influence of Substrate Biasing on (Al, Ti)N Thin Films Deposited by a Hybrid HiPIMS/DC Sputtering Process

article

Influence of Ti addition on the properties of W–Ti–C/N sputtered films

article

Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr–Al–N coatings

Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by reactive gas pulsing

Influence of carbon content on the nanotribology of W-S-C films

Influence of deposition conditions on the adhesion of sputter-deposited WC(Co) films

Influence of deposition conditions on the morphology of sputtered W-C-(Co) films

Influence of humidity on the tribological behaviour of W-alloyed C-based amorphous coatings

Influence of hydrogen incorporation and coating thickness on the corrosion resistance of carbon based coatings deposited by magnetron sputtering

Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process

article

Influence of silver content on the tribomechanical behavior on Ag-TiCN bioactive coatings

Influence of substrate properties and annealing temperature on the stress state of magnetron sputtered tungsten thin films

scholarly article by J. C. Oliveira & Albano Cavaleiro published November 2006 in Journal of Vacuum Science & Technology A

Influence of the silicon and oxygen content on the properties of non-hydrogenated amorphous carbon coatings

Influence of the target/shield distance on the coatings deposition by rf magnetron sputtering

Lanthanum silicate thin films for SOFC electrolytes synthesized by magnetron sputtering and subsequent annealing

Large-area homogeneous periodic surface structures generated on the surface of sputtered boron carbide thin films by femtosecond laser processing

Local Response of Sialoliths to Lithotripsy: Cues on Fragmentation Outcome

artículo científico publicado en 2017

Magnetron sputtered Ti–Si–C thin films prepared at low temperatures

Mapping the micro-abrasion resistance of a Ni-based coating deposited by PTA on gray cast iron

article by F. Fernandes et al published July 2012 in Wear

Mechanical and tribological properties of sputtered Mo–Se–C coatings

Mechanical behaviour of W–S–N and W–S–C sputtered coatings deposited with a Ti interlayer

Mechanical behaviour of amorphous W–Si–N sputtered films after thermal annealing at increasing temperatures

Mechanical evaluation of unbiased W–O–N coatings deposited by d.c. reactive magnetron sputtering

Microstructural evolution of Au/TiO 2 nanocomposite films: The influence of Au concentration and thermal annealing

Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings

Modelling of Magnetron Sputtering of Tungsten Oxide with Reactive Gas Pulsing

Modulated IR Radiometry Applied to Study $$\text{ TiO}_{2}$$ Coatings with Gold Nanocluster Inclusions

Morphological and structural characterization of oxidized La-Si sputtered thin films

Morphology and thickness distribution of sputtered W-C-Co films deposited on differently shaped substrates

Nano-galvanic coupling for enhanced Ag+ release in ZrCN-Ag films: Antibacterial application

Nanocrystalline Au:Ag:SnO2 films prepared by pulsed magnetron sputtering

Nanocrystalline SnO2 and Au:SnO2 thin films prepared by direct current magnetron reactive sputtering

Nanocrystalline structure and hardness of thin films

Nanoindentation and nanoscratch behaviour of reactive sputtered deposited W–S–C film

Nanoscale color control of TiO2 films with embedded Au nanoparticles

article by M. Torrell et al published December 2010 in Materials Letters

Nanoscale colour control: W-O graded coatings deposited by magnetron sputtering

artículo científico publicado en 2008

Nanoscale triboactivity: The response of Mo–Se–C coatings to sliding

article published in 2008

Nanostructured TiC/a-C coatings for low friction and wear resistant applications

Nanotribological Investigation of Sliding Properties of Transition Metal Dichalcogenide Thin Film Coatings

scientific article published on 17 November 2020

Ni–Ti(–Cu) shape memory alloy interlayers supporting low friction functional coatings

Novel two-step processing route combining mechanical alloying and microwave hybrid sintering to fabricate dense La9.33Si2Ge4O26 for SOFCs

On the microstructure of tungsten disulfide films alloyed with carbon and nitrogen

scholarly article by A. Nossa et al published July 2005 in Thin Solid Films

On the role of the energetic species in TiN thin film growth by reactive deep oscillation magnetron sputtering in Ar/N 2

Optical and Electrical Properties of W-O-N Coatings Deposited by DC Reactive Sputtering

Optical and microstructural properties of Au alloyed Al–O sputter deposited coatings

Optical properties and refractive index sensitivity of reactive sputtered oxide coatings with embedded Au clusters

Optical response of fractal aggregates of polarizable particles

Oxidation and diffusion processes during annealing of TiSi(V)N films

Oxidation behavior of Ni-based coatings deposited by PTA on gray cast iron

article by F. Fernandes et al published August 2012 in Surface & Coatings Technology

Oxidation behaviour of W-N-M (M = Ni, Ti) sputtered films

Oxidation of magnetron sputtered La-Si thin films for solide oxide fuel cell electronlytes

Oxidation of sputtered W-based coatings

Oxygen sensitivity of erbium-doped AlN films probed by site selective spectroscopy

Performance of W–TI-(N) coated pins in lubricated pin-on-disk tests

Phase tailoring of tantalum thin films deposited in deep oscillation magnetron sputtering mode

scholarly article by Fábio Ferreira et al published March 2017 in Surface & Coatings Technology

Prediction of optimized composition for enhanced mechanical and electrochemical response of Zr-C-N-Ag coatings for medical devices

article

Production and Characterization of Ag Nanoclusters Produced by Plasma Gas Condensation

Production and characterization of Si-N films obtained by r.f. magnetron sputtering

Properties of nanocomposite film combining hard TiN matrix with embedded fullerene-like WS2 nanoclusters

Property change in ZrNxOy thin films: effect of the oxygen fraction and bias voltage

article

Protective YSZ-based thin films deposited by RF magnetron sputtering

Pulsed direct current magnetron sputtered nanocrystalline tin oxide films

Reduced atomic shadowing in HiPIMS: Role of the thermalized metal ions

Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon

article

Self-Lubricating W-S-C Nanocomposite Coatings

article published in 2009

Self-adaptive low friction coatings based on transition metal dichalcogenides

Self-lubricating TiSi(V)N thin films deposited by deep oscillation magnetron sputtering (DOMS)

Silicon Effect on the Hardness of r.f. Sputtered B-C:Si Amorphous Films

Silver surface segregation in Ag-DLC nanocomposite coatings

Sliding Properties of MoS2 Layers: Load and Interlayer Orientation Effects

Sliding mechanisms in tribological contact of TMD-C sputtered coatings

Sliding properties of Zr-DLC coatings: The effect of tribolayer formation

article published in 2014

Sputtered YSZ based protective thin films for SOFCs

Structural analysis of sputtered (W-C)1−xMx (MFe, Co) films with 0⩽x⩽0.20

Structural and Mechanical properties of Ti–Si–C–ON for biomedical applications

Structural and electrochemical characterization of Zr–C–N–Ag coatings deposited by DC dual magnetron sputtering

Structural and functional properties of nanocomposite Au–WO3 coatings

Structural and mechanical properties of Au alloyed AlO sputter deposited coatings

Structural and mechanical properties of amorphous W–Si–N sputtered films after thermal annealing

Structural and mechanical properties of nanocrystalline Zr co-sputtered a-C(:H) amorphous films

Structural and optical studies of Au doped titanium oxide films

scholarly article by E. Alves et al published February 2012 in Nuclear Instruments & Methods in Physics Research B

Structural and tribological characterization of tungsten nitride coatings at elevated temperature

scholarly article by Tomas Polcar et al published July 2008 in Wear

Structural behaviour of sputtered W-C-Co coatings at increasing temperatures

Structural changes in Zr–Si–N films vs. their silicon content

Structural evolution in ZrNxOy thin films as a function of temperature

Structural stability of decorative ZrNxOy thin films

Structural, chemical, optical and mechanical properties of Au doped AlN sputtered coatings

Structural, electrical, optical, and mechanical characterizations of decorative ZrOxNy thin films

Structural, mechanical and tribological properties of Mo–S–C solid lubricant coating

Structure and chemical composition of W-C-(Co) sputtered films

article

Structure and ionic conductivity of reactively sputtered apatite-type lanthanum silicate thin films

Structure and mechanical properties of Ti–Al films deposited by magnetron sputtering

article published in 2005

Structure and tribological properties of AlCrTiN coatings at elevated temperature

Structure and tribology of biocompatible Ti–C:H coatings

Structure, hardness and thermal stability of Ti(Al,N) coatings

Structure, mechanical and tribological properties of self-lubricant W–S–N coatings

Structure, mechanical properties and tribology of W–N and W–O coatings

Study of the Cathode Potential in a Sputtering Discharge by Pulsing the Reactive Gas: Case of a W Target in an Ar-O2 Atmosphere

Study of the effect of the silver content on the structural and mechanical behavior of Ag-ZrCN coatings for orthopedic prostheses.

artículo científico publicado en 2014

Study of the structural changes induced by air oxidation in Ti–Si–N hard coatings

Study of tungsten sputtered films with low nitrogen content

scholarly article by J Castanho et al published October 1994 in Vacuum

Surface Plasmon Resonance Effect on the Optical Properties of TiO 2 Doped by Noble Metals Nanoparticles

Synthesis and electrical properties of Ln2CuO4+ δ (Ln: Nd or La) mixed conductor sputter deposited coatings

Synthesis and properties of W–Se–C coatings deposited by PVD in reactive and non-reactive processes

Synthesis and structural properties of Mo–Se–C sputtered coatings

Synthesis, structural and mechanical characterization of sputtered tungsten oxide coatings

scholarly article by N.M.G. Parreira et al published July 2006 in Thin Solid Films

TEM Characterization of W-O-N Coatings

TEM investigation of MoSeC films

Tailoring the nanostructure of Ti–Si–N thin films by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode

The depth profile analysis of W-Si-N coatings after thermal annealing

The effect of increasing V content on the structure, mechanical properties and oxidation resistance of Ti–Si–V–N films deposited by DC reactive magnetron sputtering

The effects of a third element on structure and properties of W–C/N

The influence of Er doping of Al–N sputtered coatings on their mechanical properties

The influence of annealing treatments on the properties of Ag:TiO2 nanocomposite films prepared by magnetron sputtering

The influence of experimental parameters on hardness and Young's modulus determination using depth-sensing testing

The influence of small additions of Ni, Ti and C on the oxidation behaviour of sputtered tungsten coatings

article

The influence of structure changes in the properties of TiCxOy decorative thin films

The influence of the addition of C and N on the wear behaviour of W–S–C/N coatings

article

The nanostructure and microstructure of steels: Electrochemical Tafel behaviour and atomic force microscopy

article published in 2005

The structure and hardness of magnetron sputtered Ti–Al–N thin films with low N contents (<42 at.%)

The structure of thin films deposited from a sintered tungsten carbide with a high cobalt content (15 wt.%)

scholarly article by Albano Cavaleiro et al published March 1990 in Thin Solid Films

The tribological behavior of W–S–C films in pin-on-disk testing at elevated temperature

The ultimate vacuum pressure and the characteristics of sputtered coatings

Thermal behaviour of hard nanocomposite coatings within the W–Si–N system in oxidant and protective atmospheres

Thermal stability in oxidative and protective environments of a-C:H cap layer on a functional gradient coating

Thermal stability of reactive sputtered tungsten oxide coatings

scholarly article by N.M.G. Parreira et al published May 2007 in Surface & Coatings Technology

Thin films composed of Ag nanoclusters dispersed in TiO2: Influence of composition and thermal annealing on the microstructure and physical responses

article

Thin films composed of gold nanoparticles dispersed in a dielectric matrix: The influence of the host matrix on the optical and mechanical responses

article

TiO2coatings with Au nanoparticles analysed by photothermal IR radiometry

Titanium Substrate Surfaces Coated with Hydroxyapatite by Magnetron Sputtering

scholarly article published June 2014

Tribological Behaviour of N(C)-Alloyed W–S Films

Tribological Performance of CrAlSiN Coatings at High Temperatures

Tribological and cutting performance of TiAlCrN films with different Cr contents deposited with multilayered structure

Tribological behavior of uncoated and DLC-coated CoCr and Ti-alloys in contact with UHMWPE and PEEK counterbodies

Tribological behaviour a-C and a-C:H films doped with Ti in biological solutions

Tribological behaviour at elevated temperatures of thin physical vapour deposited coatings

Tribological behaviour of C-alloyed transition metal dichalcogenides (TMD) coatings in different environments

Tribological behaviour of W-alloyed carbon-based coatings in dry and lubricated sliding contact

Tribological behaviour of W–Ti–N coatings in semi-industrial strip-drawing tests

Tribological behaviour of W–Ti–N sputtered thin films

Tribological behaviour of nanostructured Ti-C:H coatings for biomedical applications

Tribological characterization of TiO 2 /Au decorative thin films obtained by PVD magnetron sputtering technology

Tribological characterization of tungsten nitride coatings deposited by reactive magnetron sputtering

scholarly article by Tomas Polcar et al published February 2007 in Wear

Tribological properties of self-lubricating TiSiVN coatings at room temperature

Tungsten oxide with different oxygen contents: Sliding properties

scholarly article by Tomas Polcar et al published August 2007 in Vacuum

Tuning of the surface plasmon resonance in TiO2/Au thin films grown by magnetron sputtering: The effect of thermal annealing

Ultra-low friction W–S–N solid lubricant coating

Ultra-microhardness testing procedure with Vickers indenter

Water and oil wettability of anodized 6016 aluminum alloy surface

scholarly article by S.P. Rodrigues et al published November 2017 in Applied Surface Science

Wear resistance of a nickel-based coating deposited by PTA on grey cast iron

scholarly article by Filipe Fernandes et al published 2012 in International Journal of Surface Science and Engineering

W–S–C sputtered films: Influence of the carbon alloying method on the mechanical properties

a-C(:H) and a-C(:H)_Zr coatings deposited on biomedical Ti-based substrates: Tribological properties