Lista de obras - Mark P Staiger - Dominio Público Uruguay

A Novel Manufacturing Route for Fabrication of Topologically-Ordered Porous Magnesium Scaffolds

A critical review of all-cellulose composites

artículo científico publicado en 2011

Accelerated Ultraviolet Weathering of Recycled Polypropylene—Sawdust Composites

artículo científico publicado en 2009

Aerocellulose based on all-cellulose composites

artículo científico publicado en 2010

All-Cellulose Composites

artículo científico publicado en 2012

All-cellulose composite laminates

artículo científico publicado en 2012

All-cellulose composites based on microfibrillated cellulose and filter paper via a NaOH-urea solvent system

artículo científico publicado en 2015

Amyloid fibrils as functionalizable components of nanocomposite materials

scientific article published on 14 October 2011

Biodegradability of all-cellulose composite laminates

artículo científico publicado en 2014

Bone-like matrix formation on magnesium and magnesium alloys.

artículo científico publicado en 2007

Buffer-regulated biocorrosion of pure magnesium

artículo científico publicado en 2011

Complementary characterization data in support of uniaxially aligned electrospun nanocomposites based on a model PVOH-epoxy system

artículo científico publicado en 2016

Controllingin vitrocorrosion rate of pure Mg with rough surface texture via biomimetic coating systems

Digital Image-Based Elasto-Tomography: First Experiments in Surface Based Mechanical Property Estimation of Gelatine Phantoms

artículo científico publicado en 2005

Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE)

artículo científico publicado en 2008

Drug release, cytocompatibility, bioactivity, and antibacterial activity of doxycycline loaded Mg-Ca-TiO2 composite scaffold

artículo científico publicado en 2018

Dynamic mechanical analysis and biomineralization of hyaluronan-polyethylene copolymers for potential use in osteochondral defect repair

artículo científico publicado en 2010

Effect of Charge Density on the Taylor Cone in Electrospinning

artículo científico publicado en 2009

Effect of salts on the electrospinning of poly(vinyl alcohol)

artículo científico publicado en 2009

Effects of the accelerated freeze-thaw cycling on physical and mechanical properties of wood flour-recycled thermoplastic composites

artículo científico publicado en 2009

Effects of the molecular format of collagen on characteristics of electrospun fibres

artículo científico publicado en 2011

Electrospun single-walled carbon nanotube/polyvinyl alcohol composite nanofibers: structure-property relationships

artículo científico publicado en 2008

Enhancement of corrosion resistance and mechanical properties of Mg–1.2Ca–2Bi via a hybrid silicon-biopolymer coating system

artículo científico publicado en 2016

Flexural and impact properties of all-cellulose composite laminates

artículo científico publicado en 2013

Growth of calcium phosphates on magnesium substrates for corrosion control in biomedical applications via immersion techniques

High-Temperature Viscoelastic Relaxation in All-Cellulose Composites

artículo científico publicado en 2014

In-vitro dissolution of magnesium-calcium binary alloys: Clarifying the unique role of calcium additions in bioresorbable magnesium implant alloys

article

Insights into the power law relationships that describe mass deposition rates during electrospinning

artículo científico publicado en 2011

Ionic liquids and their interaction with cellulose

scientific article published on December 2009

Long-term moisture absorption and thickness swelling behaviour of recycled thermoplastics reinforced with Pinus radiata sawdust

artículo científico publicado en 2008

Magnesium alloys: predicting in vivo corrosion with in vitro immersion testing

artículo científico publicado en 2012

Magnesium and its alloys as orthopedic biomaterials: a review.

artículo científico publicado en 2005

Magnesium biomaterials for orthopedic application: a review from a biological perspective

artículo científico publicado en 2014

Monetite and brushite coated magnesium: in vivo and in vitro models for degradation analysis.

artículo científico publicado en 2013

Nanostructured cellulose-xyloglucan blends via ionic liquid/water processing.

artículo científico publicado en 2017

Novel protein-based bio-aerogels derived from canola seed meal

artículo científico publicado en 2020

On the role of surface roughness in the corrosion of pure magnesium in vitro

scientific article published on 07 May 2012

Phase transformations in microcrystalline cellulose due to partial dissolution

artículo científico publicado en 2007

Positive size and scale effects of all-cellulose composite laminates

artículo científico publicado en 2016

Preface

artículo científico

Reduced interfacial adhesion in glass fibre-epoxy composites due to water absorption via molecular dynamics simulations

artículo científico publicado en 2019

Shear-electrospinning: extending the electrospinnability range of polymer solutions

artículo científico publicado en 2016

Solvent infusion processing of all-cellulose composite laminates using an aqueous NaOH/urea solvent system

artículo científico publicado en 2016

Solvent infusion processing of all-cellulose composite materials

scientific article published on 24 May 2012

Some new characteristics of the strengthening phase in β-phase magnesium–lithium alloys containing aluminum and beryllium

artículo científico publicado en 2004

Structure–property relationship of all-cellulose composites

artículo científico publicado en 2009

Surface tension of concentrated cellulose solutions in 1-ethyl-3-methylimidazolium acetate

artículo científico publicado en 2016

Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions

artículo científico publicado en 2014

The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys

artículo científico publicado en 2014

The damping–modulus relationship in flax–carbon fibre hybrid composites

artículo científico publicado en 2016

The effect of electrode configuration and substrate material on the mass deposition rate of electrospinning

artículo científico publicado en 2009

The in vitro and in vivo evaluation of the biocompatibility of Mg alloys.

artículo científico publicado en 2013

Thermal, chemical and morphological properties of carbon fibres derived from chemically pre-treated wool fibres

artículo científico publicado en 2015

Three-dimensional braiding of continuous regenerated cellulose fibres

artículo científico publicado en 2014

Topologically ordered magnesium-biopolymer hybrid composite structures

artículo científico publicado en 2014

Treatment of Harakeke fiber for biocomposites

artículo científico publicado en 2009

Uniaxially aligned electrospun fibers for advanced nanocomposites based on a model PVOH-epoxy system

artículo científico publicado en 2016

WITHDRAWN: Corrosion-resistant calcium phosphate coatings on pure magnesium via in situ crystallization

artículo científico publicado en 2011

Lista de obras de Mark P Staiger

A Novel Manufacturing Route for Fabrication of Topologically-Ordered Porous Magnesium Scaffolds

A critical review of all-cellulose composites

Accelerated Ultraviolet Weathering of Recycled Polypropylene—Sawdust Composites

Aerocellulose based on all-cellulose composites

All-Cellulose Composites

All-cellulose composite laminates

All-cellulose composites based on microfibrillated cellulose and filter paper via a NaOH-urea solvent system

Amyloid fibrils as functionalizable components of nanocomposite materials

Biodegradability of all-cellulose composite laminates

Bone-like matrix formation on magnesium and magnesium alloys.

Buffer-regulated biocorrosion of pure magnesium

Complementary characterization data in support of uniaxially aligned electrospun nanocomposites based on a model PVOH-epoxy system

Controllingin vitrocorrosion rate of pure Mg with rough surface texture via biomimetic coating systems

Digital Image-Based Elasto-Tomography: First Experiments in Surface Based Mechanical Property Estimation of Gelatine Phantoms

Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE)

Drug release, cytocompatibility, bioactivity, and antibacterial activity of doxycycline loaded Mg-Ca-TiO2 composite scaffold

Dynamic mechanical analysis and biomineralization of hyaluronan-polyethylene copolymers for potential use in osteochondral defect repair

Effect of Charge Density on the Taylor Cone in Electrospinning

Effect of salts on the electrospinning of poly(vinyl alcohol)

Effects of the accelerated freeze-thaw cycling on physical and mechanical properties of wood flour-recycled thermoplastic composites

Effects of the molecular format of collagen on characteristics of electrospun fibres

Electrospun single-walled carbon nanotube/polyvinyl alcohol composite nanofibers: structure-property relationships

Enhancement of corrosion resistance and mechanical properties of Mg–1.2Ca–2Bi via a hybrid silicon-biopolymer coating system

Flexural and impact properties of all-cellulose composite laminates

Growth of calcium phosphates on magnesium substrates for corrosion control in biomedical applications via immersion techniques

High-Temperature Viscoelastic Relaxation in All-Cellulose Composites

In-vitro dissolution of magnesium-calcium binary alloys: Clarifying the unique role of calcium additions in bioresorbable magnesium implant alloys

Insights into the power law relationships that describe mass deposition rates during electrospinning

Ionic liquids and their interaction with cellulose

Long-term moisture absorption and thickness swelling behaviour of recycled thermoplastics reinforced with Pinus radiata sawdust

Magnesium alloys: predicting in vivo corrosion with in vitro immersion testing

Magnesium and its alloys as orthopedic biomaterials: a review.

Magnesium biomaterials for orthopedic application: a review from a biological perspective

Monetite and brushite coated magnesium: in vivo and in vitro models for degradation analysis.

Nanostructured cellulose-xyloglucan blends via ionic liquid/water processing.

Novel protein-based bio-aerogels derived from canola seed meal

On the role of surface roughness in the corrosion of pure magnesium in vitro

Phase transformations in microcrystalline cellulose due to partial dissolution

Positive size and scale effects of all-cellulose composite laminates

Preface

Reduced interfacial adhesion in glass fibre-epoxy composites due to water absorption via molecular dynamics simulations

Shear-electrospinning: extending the electrospinnability range of polymer solutions

Solvent infusion processing of all-cellulose composite laminates using an aqueous NaOH/urea solvent system

Solvent infusion processing of all-cellulose composite materials

Some new characteristics of the strengthening phase in β-phase magnesium–lithium alloys containing aluminum and beryllium

Structure–property relationship of all-cellulose composites

Surface tension of concentrated cellulose solutions in 1-ethyl-3-methylimidazolium acetate

Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions

The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys

The damping–modulus relationship in flax–carbon fibre hybrid composites

The effect of electrode configuration and substrate material on the mass deposition rate of electrospinning

The in vitro and in vivo evaluation of the biocompatibility of Mg alloys.

Thermal, chemical and morphological properties of carbon fibres derived from chemically pre-treated wool fibres

Three-dimensional braiding of continuous regenerated cellulose fibres

Topologically ordered magnesium-biopolymer hybrid composite structures

Treatment of Harakeke fiber for biocomposites

Uniaxially aligned electrospun fibers for advanced nanocomposites based on a model PVOH-epoxy system

WITHDRAWN: Corrosion-resistant calcium phosphate coatings on pure magnesium via in situ crystallization