Advances in the Development of a 10-kA Class REBCO Cable for the EuCARD2 Demonstrator Magnet

Artificial Pinning in Nb3Sn Wires

Bubble formation within filaments of melt-processed Bi2212 wires and its strongly negative effect on the critical current density

Characterization of the Stress Distribution on Nb3Sn Rutherford Cables Under Transverse Compression

Evaluation of critical current density and residual resistance ratio limits in powder in tube Nb3Sn conductors

Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires

Fabrication of the 7.3-m-Long Coils for the Prototype of MQXFB, the Nb3Sn Low-b Quadrupole Magnet for the HiLumi LHC

Influence of the Oxygen Partial Pressure on the Phase Evolution During Bi-2212 Wire Melt Processing

Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 T

artículo científico publicado en 2014

Mechanical Properties of the HL-LHC 11 T Nb3Sn Magnet Constituent Materials

Nb3Sn Wire Shape and Cross-Sectional Area Inhomogeneity in Rutherford Cables

Performance Boost in Industrial Multifilamentary Nb3Sn Wires due to Radiation Induced Pinning Centers. ⬇️

artículo científico publicado en 2015

Phase transformations during the reaction heat treatment of Nb3Sn superconductors

artículo científico publicado en 2010

Reduction of Gas Bubbles and Improved Critical Current Density in Bi-2212 Round Wire by Swaging

article published in 2013

Residual strain in the Nb3Sn 11 T dipole magnet coils for HL-LHC

article published in 2017

Sn concentration gradients in Powder-in-Tube superconductors

artículo científico publicado en 2010

Synchrotron Microtomography Investigation of the Filament Microstructure in Differently Processed Bi-2212 Wires

Testing Mechanical Behavior of Nb3Sn Rutherford Cable During Coil Winding

The crystal structure of (Nb0.75Cu0.25)Sn2 in the Cu-Nb-Sn system

Thermomechanical Behavior of the HL-LHC 11 Tesla Nb3Sn Magnet Coil Constituents During Reaction Heat Treatment

Three-Dimensional Analysis of the Porosity in MgB2Wires Using FIB Nanotomography

Void and phase evolution during the processing of Bi-2212 superconducting wires monitored by combined fast synchrotron micro-tomography and x-ray diffraction

scholarly article by Christian Scheuerlein et al published 30 September 2011 in Superconductor Science and Technology