Lista de obras - Loren Rieth - Dominio Público Uruguay

A 3D glass optrode array for optical neural stimulation

artículo científico publicado en 2012

A Novel Method of Fabricating Convoluted Shaped Electrode Arrays for Neural and Retinal Prostheses

artículo científico publicado en 2008

A Wafer-Scale Etching Technique for High Aspect Ratio Implantable MEMS Structures

artículo científico publicado en 2010

A new high-density (25 electrodes/mm²) penetrating microelectrode array for recording and stimulating sub-millimeter neuroanatomical structures

artículo científico publicado en 2013

An impedance matching algorithm for common-mode interference removal in vagus nerve recordings

scientific article published on 22 October 2019

Analysis of Al2O3-parylene C bilayer coatings and impact of microelectrode topography on long term stability of implantable neural arrays

artículo científico publicado en 2017

Characterization of a-SiC(x):H thin films as an encapsulation material for integrated silicon based neural interface devices

artículo científico publicado en 2007

Characterizing Longitudinal Changes in the Impedance Spectra of In-Vivo Peripheral Nerve Electrodes

scientific article published on 12 November 2018

Deep-tissue light delivery via optrode arrays

artículo científico publicado en 2014

Effect of bias voltage and temperature on lifetime of wireless neural interfaces with Al ₂O₃ and parylene bilayer encapsulation.

artículo científico publicado en 2015

Effect of temperature changes on the performance of ionic strength biosensors based on hydrogels and pressure sensors.

artículo científico publicado en 2011

Encapsulation of an integrated neural interface device with Parylene C

artículo científico publicado en 2009

Excimer laser deinsulation of Parylene-C on iridium for use in an activated iridium oxide film-coated Utah electrode array

artículo científico publicado en 2013

Growth and characterization of TiO2 nanotubes from sputtered Ti film on Si substrate.

artículo científico publicado en 2012

Hydrogel based sensor arrays (2 × 2) with perforated piezoresistive diaphragms for metabolic monitoring (in vitro).

artículo científico publicado en 2010

In vitro comparison of sputtered iridium oxide and platinum-coated neural implantable microelectrode arrays

scientific article published on 03 February 2010

In-vitro investigations of a pH- and ionic-strength-responsive polyelectrolytic hydrogel using a piezoresistive microsensor

scientific article published on 01 April 2009

Integrated wireless neural interface based on the Utah electrode array.

artículo científico publicado en 2009

Lifetime assessment of atomic-layer-deposited Al2O3-Parylene C bilayer coating for neural interfaces using accelerated age testing and electrochemical characterization

artículo científico publicado en 2013

Long term in vitro functional stability and recording longevity of fully integrated wireless neural interfaces based on the Utah Slant Electrode Array.

artículo científico publicado en 2011

Long term in vitro stability of fully integrated wireless neural interfaces based on Utah slant electrode array

artículo científico publicado en 2010

Long-term bilayer encapsulation performance of atomic layer deposited Al₂O₃ and Parylene C for biomedical implantable devices

artículo científico publicado en 2013

Long-term reliability of Al2O3 and Parylene C bilayer encapsulated Utah electrode array based neural interfaces for chronic implantation

artículo científico publicado en 2014

Multisite microLED optrode array for neural interfacing

artículo científico publicado en 2019

Neural electrode degradation from continuous electrical stimulation: comparison of sputtered and activated iridium oxide.

artículo científico publicado en 2009

Neural electrode resilience against dielectric damage may be improved by use of highly doped silicon as a conductive material

artículo científico publicado en 2017

Plasma-assisted atomic layer deposition of Al2O3 and parylene C bi-layer encapsulation for chronic implantable electronics ⬇️

artículo científico publicado el 27 de agosto de 2012

SELF ALIGNED TIP DEINSULATION OF ATOMIC LAYER DEPOSITED AL2O3 AND PARYLENE C COATED UTAH ELECTRODE ARRAY BASED NEURAL INTERFACES.

artículo científico publicado en 2014

Lista de obras de Loren Rieth

A 3D glass optrode array for optical neural stimulation

A Novel Method of Fabricating Convoluted Shaped Electrode Arrays for Neural and Retinal Prostheses

A Wafer-Scale Etching Technique for High Aspect Ratio Implantable MEMS Structures

A new high-density (25 electrodes/mm²) penetrating microelectrode array for recording and stimulating sub-millimeter neuroanatomical structures

An impedance matching algorithm for common-mode interference removal in vagus nerve recordings

Analysis of Al2O3-parylene C bilayer coatings and impact of microelectrode topography on long term stability of implantable neural arrays

Characterization of a-SiC(x):H thin films as an encapsulation material for integrated silicon based neural interface devices

Characterizing Longitudinal Changes in the Impedance Spectra of In-Vivo Peripheral Nerve Electrodes

Deep-tissue light delivery via optrode arrays

Effect of bias voltage and temperature on lifetime of wireless neural interfaces with Al ₂O₃ and parylene bilayer encapsulation.

Effect of temperature changes on the performance of ionic strength biosensors based on hydrogels and pressure sensors.

Encapsulation of an integrated neural interface device with Parylene C

Excimer laser deinsulation of Parylene-C on iridium for use in an activated iridium oxide film-coated Utah electrode array

Growth and characterization of TiO2 nanotubes from sputtered Ti film on Si substrate.

Hydrogel based sensor arrays (2 × 2) with perforated piezoresistive diaphragms for metabolic monitoring (in vitro).

In vitro comparison of sputtered iridium oxide and platinum-coated neural implantable microelectrode arrays

In-vitro investigations of a pH- and ionic-strength-responsive polyelectrolytic hydrogel using a piezoresistive microsensor

Integrated wireless neural interface based on the Utah electrode array.

Lifetime assessment of atomic-layer-deposited Al2O3-Parylene C bilayer coating for neural interfaces using accelerated age testing and electrochemical characterization

Long term in vitro functional stability and recording longevity of fully integrated wireless neural interfaces based on the Utah Slant Electrode Array.

Long term in vitro stability of fully integrated wireless neural interfaces based on Utah slant electrode array

Long-term bilayer encapsulation performance of atomic layer deposited Al₂O₃ and Parylene C for biomedical implantable devices

Long-term reliability of Al2O3 and Parylene C bilayer encapsulated Utah electrode array based neural interfaces for chronic implantation

Multisite microLED optrode array for neural interfacing

Neural electrode degradation from continuous electrical stimulation: comparison of sputtered and activated iridium oxide.

Neural electrode resilience against dielectric damage may be improved by use of highly doped silicon as a conductive material

Plasma-assisted atomic layer deposition of Al2O3 and parylene C bi-layer encapsulation for chronic implantable electronics ⬇️

SELF ALIGNED TIP DEINSULATION OF ATOMIC LAYER DEPOSITED AL2O3 AND PARYLENE C COATED UTAH ELECTRODE ARRAY BASED NEURAL INTERFACES.