Lista de obras - Paulo Francisco Cesar - Dominio Público Uruguay

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

artículo científico publicado en 2015

ADM guidance-Ceramics: Fracture toughness testing and method selection.

artículo científico publicado en 2017

ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistry

artículo científico publicado en 2017

ADM guidance-Ceramics: guidance to the use of fractography in failure analysis of brittle materials.

artículo científico publicado en 2017

ADM guidance-ceramics: Fatigue principles and testing

artículo científico publicado en 2017

ADM research guidance papers

artículo científico publicado en 2017

Adaptation of all-ceramic fixed partial dentures.

artículo científico publicado en 2011

Adhesion behavior of conventional and high-translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology

artículo científico publicado en 2019

Aging Effect of Atmospheric Air on Zirconia Surfaces Treated by Nonthermal Plasma.

artículo científico publicado en 2015

Aging effect of atmospheric air on lithium disilicate ceramic after nonthermal plasma treatment.

artículo científico publicado en 2016

Al2O3/GdAlO3 fiber for dental porcelain reinforcement

artículo científico publicado en 2008

Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation.

artículo científico publicado en 2015

Association of different primers and resin cements for adhesive bonding to zirconia ceramics

artículo científico publicado en 2014

Bond strength and Raman analysis of the zirconia-feldspathic porcelain interface.

artículo científico publicado en 2014

CO2 Laser Glazing Treatment of a Veneering Porcelain: Effects on Porosity, Translucency, and Mechanical Properties

artículo científico publicado en 2014

Can 10% hydrofluoric acid be used for reconditioning of orthodontic brackets?

artículo científico publicado en 2016

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength

scientific article published on 01 July 2016

Chipping of veneering ceramic on a lithium disilicate anterior single crown: Description of repair method and a fractographic failure analysis

scientific article published on 25 March 2019

Comparative assessment of different recycling methods of orthodontic brackets for clinical use.

artículo científico publicado en 2017

Correlation between clinical performance and degree of conversion of resin cements: a literature review ⬇️

artículo científico publicado en 2015

Correlation between fracture toughness and leucite content in dental porcelains.

artículo científico publicado en 2005

Dental ceramics: a review of new materials and processing methods

artículo científico publicado en 2017

Determination of the slow crack growth susceptibility coefficient of dental ceramics using different methods ⬇️

artículo científico publicado el 28 de junio de 2011

Direct comparison of the bond strength results of the different test methods: a critical literature review.

artículo científico publicado en 2010

Effect of Grinding and Resintering on the Fatigue Limit and Surface Characterization of a Y-TZP Ceramic

artículo científico publicado en 2016

Effect of ceramic infrastructure on the failure behavior and stress distribution of fixed partial dentures.

artículo científico

Effect of different aging methods on the mechanical behavior of multi-layered ceramic structures.

artículo científico publicado en 2016

Effect of fiber addition on slow crack growth of a dental porcelain

artículo científico publicado en 2014

Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic

artículo científico publicado en 2014

Effect of ion exchange on hardness and fracture toughness of dental porcelains

artículo científico publicado en 2007

Effect of ion exchange on strength and slow crack growth of a dental porcelain.

artículo científico publicado en 2009

Effect of low-temperature aging on the mechanical behavior of ground Y-TZP.

artículo científico publicado en 2014

Effect of processing induced particle alignment on the fracture toughness and fracture behavior of multiphase dental ceramics.

artículo científico publicado en 2009

Effect of test environment and microstructure on the flexural strength of dental porcelains

artículo científico publicado en 2011

Effect of titania content and biomimetic coating on the mechanical properties of the Y-TZP/TiO2 composite.

artículo científico publicado en 2017

Effect of two erosive protocols using acidic beverages on the shear bond strength of orthodontic brackets to bovine enamel

artículo científico publicado en 2018

Evaluation of tensile retention of Y-TZP crowns after long-term aging: effect of the core substrate and crown surface conditioning

artículo científico publicado en 2014

Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: effect of the cement and Y-TZP surface conditioning.

artículo científico

Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

scientific article published on 01 September 2013

FEA and microstructure characterization of a one-piece Y-TZP abutment.

artículo científico publicado en 2014

Failure modes of Y-TZP abutments with external hex implant-abutment connection determined by fractographic analysis.

artículo científico publicado en 2016

Fatigue behavior of Y-TZP ceramic after surface treatments

article

Flexural strength and failure modes of layered ceramic structures

artículo científico publicado en 2011

Fractographic principles applied to Y-TZP mechanical behavior analysis

artículo científico publicado en 2015

Fracture Load and Phase Transformation of Monolithic Zirconia Crowns Submitted to Different Aging Protocols

artículo científico publicado en 2016

Impact of background on color, transmittance, and fluorescence of leucite based ceramics

artículo científico publicado en 2017

Impact of laboratory treatment with coloring and fluorescent liquids on the optical properties of zirconia before and after accelerated aging.

artículo científico publicado en 2018

In Vitro Behavior of Osteoblasts on Zirconia After Different Intensities of Erbium, Chromium-Doped: Yttrium, Scandium, Gallium, and Garnet-Laser Irradiation

artículo científico publicado en 2016

Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins.

artículo científico publicado en 2016

Influence of Resin Cements on Color Stability of Different Ceramic Systems

artículo científico publicado en 2017

Influence of resin cement shade on the color and translucency of ceramic veneers.

artículo científico publicado en 2016

Influence of the finishing technique on surface roughness of dental porcelains with different microstructures

artículo científico publicado en 2006

Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants

artículo científico publicado en 2018

Microstructure characterization and SCG of newly engineered dental ceramics

artículo científico publicado en 2016

Mono or polycrystalline alumina-modified hybrid ceramics

artículo científico publicado en 2016

Optical properties and colorimetric evaluation of resin cements formulated with thio-urethane oligomers

scientific article published on 05 November 2018

Physico-chemical characterization of zirconia-titania composites coated with an apatite layer for dental implants

article

Porcelain monolayers and porcelain/alumina bilayers reinforced by Al2O3/GdAlO3 fibers.

artículo científico publicado en 2011

Relationship between fracture toughness and flexural strength in dental porcelains.

artículo científico publicado en 2006

Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by hole-drilling.

artículo científico publicado en 2013

Residual stresses in Y-TZP crowns due to changes in the thermal contraction coefficient of veneers.

artículo científico publicado en 2013

Resin cements formulated with thio-urethanes can strengthen porcelain and increase bond strength to ceramics

artículo científico publicado en 2018

Slow crack growth and reliability of dental ceramics.

artículo científico publicado en 2010

Step-stress analysis for predicting dental ceramic reliability.

artículo científico publicado en 2013

Stress intensity factor threshold in dental porcelains.

artículo científico publicado en 2007

Subcritical crack growth and in vitro lifetime prediction of resin composites with different filler distributions.

artículo científico publicado en 2012

Subcritical crack growth in porcelains, glass-ceramics, and glass-infiltrated alumina composite for dental restorations

artículo científico publicado en 2008

Surface Characterization of a Glass Fiber Post after Nonthermal Plasma Treatment with Hexamethyldisiloxane

scientific article published on 19 December 2017

Systematic approach to preparing ceramic-glass composites with high translucency for dental restorations

artículo científico publicado en 2015

The potential of novel primers and universal adhesives to bond to zirconia.

artículo científico publicado en 2013

Lista de obras de Paulo Francisco Cesar

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

ADM guidance-Ceramics: Fracture toughness testing and method selection.

ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistry

ADM guidance-Ceramics: guidance to the use of fractography in failure analysis of brittle materials.

ADM guidance-ceramics: Fatigue principles and testing

ADM research guidance papers

Adaptation of all-ceramic fixed partial dentures.

Adhesion behavior of conventional and high-translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology

Aging Effect of Atmospheric Air on Zirconia Surfaces Treated by Nonthermal Plasma.

Aging effect of atmospheric air on lithium disilicate ceramic after nonthermal plasma treatment.

Al2O3/GdAlO3 fiber for dental porcelain reinforcement

Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation.

Association of different primers and resin cements for adhesive bonding to zirconia ceramics

Bond strength and Raman analysis of the zirconia-feldspathic porcelain interface.

CO2 Laser Glazing Treatment of a Veneering Porcelain: Effects on Porosity, Translucency, and Mechanical Properties

Can 10% hydrofluoric acid be used for reconditioning of orthodontic brackets?

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength

Chipping of veneering ceramic on a lithium disilicate anterior single crown: Description of repair method and a fractographic failure analysis

Comparative assessment of different recycling methods of orthodontic brackets for clinical use.

Correlation between clinical performance and degree of conversion of resin cements: a literature review ⬇️

Correlation between fracture toughness and leucite content in dental porcelains.

Dental ceramics: a review of new materials and processing methods

Determination of the slow crack growth susceptibility coefficient of dental ceramics using different methods ⬇️

Direct comparison of the bond strength results of the different test methods: a critical literature review.

Effect of Grinding and Resintering on the Fatigue Limit and Surface Characterization of a Y-TZP Ceramic

Effect of ceramic infrastructure on the failure behavior and stress distribution of fixed partial dentures.

Effect of different aging methods on the mechanical behavior of multi-layered ceramic structures.

Effect of fiber addition on slow crack growth of a dental porcelain

Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic

Effect of ion exchange on hardness and fracture toughness of dental porcelains

Effect of ion exchange on strength and slow crack growth of a dental porcelain.

Effect of low-temperature aging on the mechanical behavior of ground Y-TZP.

Effect of processing induced particle alignment on the fracture toughness and fracture behavior of multiphase dental ceramics.

Effect of test environment and microstructure on the flexural strength of dental porcelains

Effect of titania content and biomimetic coating on the mechanical properties of the Y-TZP/TiO2 composite.

Effect of two erosive protocols using acidic beverages on the shear bond strength of orthodontic brackets to bovine enamel

Evaluation of tensile retention of Y-TZP crowns after long-term aging: effect of the core substrate and crown surface conditioning

Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: effect of the cement and Y-TZP surface conditioning.

Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology

FEA and microstructure characterization of a one-piece Y-TZP abutment.

Failure modes of Y-TZP abutments with external hex implant-abutment connection determined by fractographic analysis.

Fatigue behavior of Y-TZP ceramic after surface treatments

Flexural strength and failure modes of layered ceramic structures

Fractographic principles applied to Y-TZP mechanical behavior analysis

Fracture Load and Phase Transformation of Monolithic Zirconia Crowns Submitted to Different Aging Protocols

Impact of background on color, transmittance, and fluorescence of leucite based ceramics

Impact of laboratory treatment with coloring and fluorescent liquids on the optical properties of zirconia before and after accelerated aging.

In Vitro Behavior of Osteoblasts on Zirconia After Different Intensities of Erbium, Chromium-Doped: Yttrium, Scandium, Gallium, and Garnet-Laser Irradiation

Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins.

Influence of Resin Cements on Color Stability of Different Ceramic Systems

Influence of resin cement shade on the color and translucency of ceramic veneers.

Influence of the finishing technique on surface roughness of dental porcelains with different microstructures

Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants

Microstructure characterization and SCG of newly engineered dental ceramics

Mono or polycrystalline alumina-modified hybrid ceramics

Optical properties and colorimetric evaluation of resin cements formulated with thio-urethane oligomers

Physico-chemical characterization of zirconia-titania composites coated with an apatite layer for dental implants

Porcelain monolayers and porcelain/alumina bilayers reinforced by Al2O3/GdAlO3 fibers.

Relationship between fracture toughness and flexural strength in dental porcelains.

Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by hole-drilling.

Residual stresses in Y-TZP crowns due to changes in the thermal contraction coefficient of veneers.

Resin cements formulated with thio-urethanes can strengthen porcelain and increase bond strength to ceramics

Slow crack growth and reliability of dental ceramics.

Step-stress analysis for predicting dental ceramic reliability.

Stress intensity factor threshold in dental porcelains.

Subcritical crack growth and in vitro lifetime prediction of resin composites with different filler distributions.

Subcritical crack growth in porcelains, glass-ceramics, and glass-infiltrated alumina composite for dental restorations

Surface Characterization of a Glass Fiber Post after Nonthermal Plasma Treatment with Hexamethyldisiloxane

Systematic approach to preparing ceramic-glass composites with high translucency for dental restorations

The potential of novel primers and universal adhesives to bond to zirconia.