Lista de obras - Ingmar Nopens - Dominio Público Uruguay

A GLUE uncertainty analysis of a drying model of pharmaceutical granules

artículo científico publicado en 2013

A Methodology to Model Environmental Preferences of EPT Taxa in the Machangara River Basin (Ecuador)

scholarly article by Rubén Jerves-Cobo et al published 8 March 2017 in Water

A calibration methodology and model-based systems analysis for SBRs removing nutrients under limited aeration conditions

article

A compartmental model to describe hydraulics in a full-scale waste stabilization pond ⬇️

artículo científico publicado el 19 de noviembre de 2011

A consistent modelling methodology for secondary settling tanks in wastewater treatment ⬇️

artículo científico publicado el 1 de febrero de 2011

A consistent modelling methodology for secondary settling tanks: a reliable numerical method

artículo científico publicado en 2013

A model library for dynamic transport and fate of micropollutants in integrated urban wastewater and stormwater systems

article

A new rule generation method to develop a decision support system for integrated management at river basin scale

artículo científico publicado en 2009

A novel high-throughput method for kinetic characterisation of anaerobic bioproduction strains, applied to Clostridium kluyveri.

artículo científico publicado en 2018

Ammonia stress decreased biomarker genes of acetoclastic methanogenesis and second peak of production rates during anaerobic digestion of swine manure

scientific article published on 14 August 2020

An ASM/ADM model interface for dynamic plant-wide simulation

artículo científico publicado en 2009

Analysing drying unit performance in a continuous pharmaceutical manufacturing line by means of mass--energy balances

artículo científico publicado en 2013

Analysis of mass transfer characteristics in a tubular membrane using CFD modeling.

artículo científico publicado en 2012

Application of a mechanistic UV/hydrogen peroxide model at full-scale: Sensitivity analysis, calibration and performance evaluation

Application of iterative robust model-based optimal experimental design for the calibration of biocatalytic models.

artículo científico publicado en 2017

Assessing the convergence of LHS Monte Carlo simulations of wastewater treatment models

artículo científico publicado en 2011

Automated image analysis tool for migration fat bloom evaluation of chocolate coated food products

BSM-MBR: a benchmark simulation model to compare control and operational strategies for membrane bioreactors

artículo científico publicado en 2011

Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs.

artículo científico publicado en 2013

CFD analysis of sludge accumulation and hydraulic performance of a waste stabilization pond ⬇️

artículo científico publicado el 1 de enero de 2012

CFD study to determine the optimal configuration of aerators in a full-scale waste stabilization pond

artículo científico publicado en 2013

Celebrating a milestone in Population Balance Modeling

Cell mass and cell cycle dynamics of an asynchronous budding yeast population: experimental observations, flow cytometry data analysis, and multi-scale modeling

artículo científico publicado en 2012

Characterization of soluble microbial products and their fouling impacts in membrane bioreactors

artículo científico publicado en 2010

Comparison and pitfalls of different discretised solution methods for population balance models: a simulation study

Comparison of discretization methods to solve a population balance model of activated sludge flocculation including aggregation and breakage

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

artículo científico publicado en 2009

Concentration-driven models revisited: towards a unified framework to model settling tanks in water resource recovery facilities.

artículo científico publicado en 2017

Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation.

artículo científico publicado en 2015

Control of three different continuous pharmaceutical manufacturing processes: Use of soft sensors

artículo científico publicado en 2018

Controlling submicron particle deposition in a side-stream membrane bioreactor: A theoretical hydrodynamic modelling approach incorporating energy consumption

article published in 2007

Cost-effective solutions for water quality improvement in the Dommel River supported by sewer-WWTP-river integrated modelling

artículo científico

Data on ion-exchange membrane fouling by humic acid during electrodialysis

artículo científico publicado en 2020

Detailed spatio-temporal solids concentration profiling during batch settling of activated sludge using a radiotracer

artículo científico publicado en 2005

Developing a framework to model the primary drying step of a continuous freeze-drying process based on infrared radiation

artículo científico publicado en 2018

Development and assessment of an integrated ecological modelling framework to assess the effect of investments in wastewater treatment on water quality

artículo científico

Dynamic validation of online applied and surrogate-based models for tertiary ozonation on pilot-scale.

artículo científico publicado en 2017

Editorial

Elucidation and visualization of solid-state transformation and mixing in a pharmaceutical mini hot melt extrusion process using in-line Raman spectroscopy.

artículo científico publicado en 2016

Empirical Sewer Water Quality Model for Generating Influent Data for WWTP Modelling

article published in 2017

Energy optimization of a wastewater treatment plant based on energy audit data: small investment with high return

scientific article published on 13 March 2020

Experimental investigation of granule size and shape dynamics in twin-screw granulation.

artículo científico publicado en 2014

Extending and calibrating a mechanistic hindered and compression settling model for activated sludge using in-depth batch experiments

artículo científico publicado en 2007

From the affinity constant to the half-saturation index: understanding conventional modeling concepts in novel wastewater treatment processes.

artículo científico publicado en 2014

Global Sensitivity Analysis as Good Modelling Practices tool for the identification of the most influential process parameters of the primary drying step during freeze-drying.

artículo científico publicado en 2017

Good modelling practice in applying computational fluid dynamics for WWTP modelling

artículo científico publicado en 2016

Heat Transfer Evaluation During Twin-Screw Wet Granulation in View of Detailed Process Understanding

artículo científico publicado en 2019

How well-mixed is well mixed? Hydrodynamic-biokinetic model integration in an aerated tank of a full-scale water resource recovery facility.

artículo científico publicado en 2017

Hurdles in the investigation of influent fractionation for measurement campaigns under diluted wastewater conditions.

artículo científico publicado en 2016

Impact of influent data frequency and model structure on the quality of WWTP model calibration and uncertainty ⬇️

artículo científico publicado el 1 de enero de 2012

In-depth experimental analysis of pharmaceutical twin-screw wet granulation in view of detailed process understanding

artículo científico

Integrated ecological modelling for evidence-based determination of water management interventions in urbanized river basins: Case study in the Cuenca River basin (Ecuador)

artículo científico publicado en 2019

Investigating pervaporation for in-situ acetone removal as process intensification tool in ω-transaminase catalyzed chiral amine synthesis

article

Kinetic exploration of intracellular nitrate storage in marine microalgae

artículo científico publicado en 2017

Kinetic exploration of nitrate-accumulating microalgae for nutrient recovery

artículo científico publicado en 2014

Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation.

artículo científico publicado en 2015

Mechanistic modelling of fluidized bed drying processes of wet porous granules: a review.

scientific article published on 02 June 2011

Mechanistic modelling of infrared mediated energy transfer during the primary drying step of a continuous freeze-drying process.

artículo científico publicado en 2017

Mechanistic modelling of the drying behaviour of single pharmaceutical granules.

artículo científico publicado en 2011

Membrane bioreactor fouling behaviour assessment through principal component analysis and fuzzy clustering

artículo científico publicado en 2012

Mixing and transport during pharmaceutical twin-screw wet granulation: experimental analysis via chemical imaging.

artículo científico publicado en 2014

Model development and prediction of particle size distribution, density and friability of a comilling operation in a continuous pharmaceutical manufacturing process

article

Model-based NIR spectroscopy implementation for in-line assay monitoring during a pharmaceutical suspension manufacturing process

scientific article published on 21 May 2018

Model-based analysis of high shear wet granulation from batch to continuous processes in pharmaceutical production--a critical review.

artículo científico publicado en 2013

Model-based energy optimisation of a small-scale decentralised membrane bioreactor for urban reuse

artículo científico publicado en 2010

Model-based evaluation of mechanisms and benefits of mainstream shortcut nitrogen removal processes

artículo científico publicado en 2015

Modeling aerobic carbon source degradation processes using titrimetric data and combined respirometric-titrimetric data: experimental data and model structure

artículo científico publicado en 2002

Modeling of Semicontinuous Fluid Bed Drying of Pharmaceutical Granules With Respect to Granule Size

artículo científico publicado en 2019

Modeling the anaerobic digestion of cane-molasses vinasse: extension of the Anaerobic Digestion Model No. 1 (ADM1) with sulfate reduction for a very high strength and sulfate rich wastewater

artículo científico publicado en 2014

Modeling the performance of a membrane bioreactor controlled by air sparging.

artículo científico publicado en 2006

Modelling and characterization of primary settlers in view of whole plant and resource recovery modelling.

artículo científico publicado en 2015

Modelling gas-liquid mass transfer in wastewater treatment: when current knowledge needs to encounter engineering practice and vice versa

scientific article published on 01 August 2019

Modelling the primary drying step for the determination of the optimal dynamic heating pad temperature in a continuous pharmaceutical freeze-drying process for unit doses

artículo científico publicado en 2017

Modelling the production and degradation of soluble microbial products (SMP) in membrane bioreactors (MBR).

artículo científico publicado en 2008

Moisture and drug solid-state monitoring during a continuous drying process using empirical and mass balance models

artículo científico publicado en 2014

Multi-point monitoring of nitrous oxide emissions in three full-scale conventional activated sludge tanks in Europe

artículo científico publicado en 2018

Municipal wastewater effluent characterization and variability analysis in view of an ozone dose control strategy during tertiary treatment: The status in Belgium

scientific article published on 12 January 2018

Numerical Validation of a Population Balance Model Describing Cement Paste Rheology

artículo científico publicado en 2020

On constitutive functions for hindered settling velocity in 1-D settler models: Selection of appropriate model structure.

artículo científico publicado en 2016

On data requirements for calibration of integrated models for urban water systems ⬇️

artículo científico publicado el 1 de enero de 2013

Partial integration of ADM1 into CFD: understanding the impact of diffusion on anaerobic digestion mixing

scientific article published on 01 April 2020

Population balance models: a useful complementary modelling framework for future WWTP modelling.

artículo científico publicado en 2015

Potential of Near-Infrared Chemical Imaging as Process Analytical Technology Tool for Continuous Freeze-Drying

artículo científico publicado en 2018

Predicting Pharmaceutical Particle Size Distributions Using Kernel Mean Embedding

scientific article published on 16 March 2020

Probabilistic modelling and evaluation of wastewater treatment plant upgrades in a water quality based evaluation context

article

Quantitative risk assessment via uncertainty analysis in combination with error propagation for the determination of the dynamic Design Space of the primary drying step during freeze-drying

artículo científico publicado en 2017

Shall we upgrade one-dimensional secondary settler models used in WWTP simulators? - An assessment of model structure uncertainty and its propagation.

artículo científico publicado en 2011

Surrogate-Based Correlation Models in View of Real-Time Control of Ozonation of Secondary Treated Municipal Wastewater-Model Development and Dynamic Validation.

artículo científico publicado en 2017

Tanks in series versus compartmental model configuration: considering hydrodynamics helps in parameter estimation for an N2O model

scientific article published on 01 January 2019

The cost of a large-scale hollow fibre MBR.

artículo científico publicado en 2010

The incorporation of variability and uncertainty evaluations in WWTP design by means of stochastic dynamic modeling: the case of the Eindhoven WWTP upgrade

artículo científico publicado en 2013

The relevance of shear, sedimentation and diffusion during spin freezing, as potential first step of a continuous freeze-drying process for unit doses

artículo científico publicado en 2018

The use of Rheology Combined with Differential Scanning Calorimetry to Elucidate the Granulation Mechanism of an Immiscible Formulation During Continuous Twin-Screw Melt Granulation

artículo científico publicado en 2016

The use of rheology to elucidate the granulation mechanisms of a miscible and immiscible system during continuous twin-screw melt granulation

artículo científico publicado en 2016

Toward energy-neutral wastewater treatment: a high-rate contact stabilization process to maximally recover sewage organics

artículo científico publicado en 2014

Towards advanced aeration modelling: from blower to bubbles to bulk.

artículo científico publicado en 2017

Towards an online mitigation strategy for N2O emissions through principal components analysis and clustering techniques

scientific article published on 02 March 2020

Towards improved accuracy in modeling aeration efficiency through understanding bubble size distribution dynamics

artículo científico publicado en 2017

Uncertainty analysis as essential step in the establishment of the dynamic Design Space of primary drying during freeze-drying

artículo científico publicado en 2016

Uncertainty analysis of WWTP control strategies made feasible

Understanding the effects of bulk mixing on the determination of the affinity index: consequences for process operation and design.

artículo científico publicado en 2018

Wastewater treatment models in teaching and training: the mismatch between education and requirements for jobs

artículo científico publicado en 2009

Lista de obras de Ingmar Nopens

A GLUE uncertainty analysis of a drying model of pharmaceutical granules

A Methodology to Model Environmental Preferences of EPT Taxa in the Machangara River Basin (Ecuador)

A calibration methodology and model-based systems analysis for SBRs removing nutrients under limited aeration conditions

A compartmental model to describe hydraulics in a full-scale waste stabilization pond ⬇️

A consistent modelling methodology for secondary settling tanks in wastewater treatment ⬇️

A consistent modelling methodology for secondary settling tanks: a reliable numerical method

A model library for dynamic transport and fate of micropollutants in integrated urban wastewater and stormwater systems

A new rule generation method to develop a decision support system for integrated management at river basin scale

A novel high-throughput method for kinetic characterisation of anaerobic bioproduction strains, applied to Clostridium kluyveri.

Ammonia stress decreased biomarker genes of acetoclastic methanogenesis and second peak of production rates during anaerobic digestion of swine manure

An ASM/ADM model interface for dynamic plant-wide simulation

Analysing drying unit performance in a continuous pharmaceutical manufacturing line by means of mass--energy balances

Analysis of mass transfer characteristics in a tubular membrane using CFD modeling.

Application of a mechanistic UV/hydrogen peroxide model at full-scale: Sensitivity analysis, calibration and performance evaluation

Application of iterative robust model-based optimal experimental design for the calibration of biocatalytic models.

Assessing the convergence of LHS Monte Carlo simulations of wastewater treatment models

Automated image analysis tool for migration fat bloom evaluation of chocolate coated food products

BSM-MBR: a benchmark simulation model to compare control and operational strategies for membrane bioreactors

Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs.

CFD analysis of sludge accumulation and hydraulic performance of a waste stabilization pond ⬇️

CFD study to determine the optimal configuration of aerators in a full-scale waste stabilization pond

Celebrating a milestone in Population Balance Modeling

Cell mass and cell cycle dynamics of an asynchronous budding yeast population: experimental observations, flow cytometry data analysis, and multi-scale modeling

Characterization of soluble microbial products and their fouling impacts in membrane bioreactors

Comparison and pitfalls of different discretised solution methods for population balance models: a simulation study

Comparison of discretization methods to solve a population balance model of activated sludge flocculation including aggregation and breakage

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

Concentration-driven models revisited: towards a unified framework to model settling tanks in water resource recovery facilities.

Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation.

Control of three different continuous pharmaceutical manufacturing processes: Use of soft sensors

Controlling submicron particle deposition in a side-stream membrane bioreactor: A theoretical hydrodynamic modelling approach incorporating energy consumption

Cost-effective solutions for water quality improvement in the Dommel River supported by sewer-WWTP-river integrated modelling

Data on ion-exchange membrane fouling by humic acid during electrodialysis

Detailed spatio-temporal solids concentration profiling during batch settling of activated sludge using a radiotracer

Developing a framework to model the primary drying step of a continuous freeze-drying process based on infrared radiation

Development and assessment of an integrated ecological modelling framework to assess the effect of investments in wastewater treatment on water quality

Dynamic validation of online applied and surrogate-based models for tertiary ozonation on pilot-scale.

Editorial

Elucidation and visualization of solid-state transformation and mixing in a pharmaceutical mini hot melt extrusion process using in-line Raman spectroscopy.

Empirical Sewer Water Quality Model for Generating Influent Data for WWTP Modelling

Energy optimization of a wastewater treatment plant based on energy audit data: small investment with high return

Experimental investigation of granule size and shape dynamics in twin-screw granulation.

Extending and calibrating a mechanistic hindered and compression settling model for activated sludge using in-depth batch experiments

From the affinity constant to the half-saturation index: understanding conventional modeling concepts in novel wastewater treatment processes.

Global Sensitivity Analysis as Good Modelling Practices tool for the identification of the most influential process parameters of the primary drying step during freeze-drying.

Good modelling practice in applying computational fluid dynamics for WWTP modelling

Heat Transfer Evaluation During Twin-Screw Wet Granulation in View of Detailed Process Understanding

How well-mixed is well mixed? Hydrodynamic-biokinetic model integration in an aerated tank of a full-scale water resource recovery facility.

Hurdles in the investigation of influent fractionation for measurement campaigns under diluted wastewater conditions.

Impact of influent data frequency and model structure on the quality of WWTP model calibration and uncertainty ⬇️

In-depth experimental analysis of pharmaceutical twin-screw wet granulation in view of detailed process understanding

Integrated ecological modelling for evidence-based determination of water management interventions in urbanized river basins: Case study in the Cuenca River basin (Ecuador)

Investigating pervaporation for in-situ acetone removal as process intensification tool in ω-transaminase catalyzed chiral amine synthesis

Kinetic exploration of intracellular nitrate storage in marine microalgae

Kinetic exploration of nitrate-accumulating microalgae for nutrient recovery

Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation.

Mechanistic modelling of fluidized bed drying processes of wet porous granules: a review.

Mechanistic modelling of infrared mediated energy transfer during the primary drying step of a continuous freeze-drying process.

Mechanistic modelling of the drying behaviour of single pharmaceutical granules.

Membrane bioreactor fouling behaviour assessment through principal component analysis and fuzzy clustering

Mixing and transport during pharmaceutical twin-screw wet granulation: experimental analysis via chemical imaging.

Model development and prediction of particle size distribution, density and friability of a comilling operation in a continuous pharmaceutical manufacturing process

Model-based NIR spectroscopy implementation for in-line assay monitoring during a pharmaceutical suspension manufacturing process

Model-based analysis of high shear wet granulation from batch to continuous processes in pharmaceutical production--a critical review.

Model-based energy optimisation of a small-scale decentralised membrane bioreactor for urban reuse

Model-based evaluation of mechanisms and benefits of mainstream shortcut nitrogen removal processes

Modeling aerobic carbon source degradation processes using titrimetric data and combined respirometric-titrimetric data: experimental data and model structure

Modeling of Semicontinuous Fluid Bed Drying of Pharmaceutical Granules With Respect to Granule Size

Modeling the anaerobic digestion of cane-molasses vinasse: extension of the Anaerobic Digestion Model No. 1 (ADM1) with sulfate reduction for a very high strength and sulfate rich wastewater

Modeling the performance of a membrane bioreactor controlled by air sparging.

Modelling and characterization of primary settlers in view of whole plant and resource recovery modelling.

Modelling gas-liquid mass transfer in wastewater treatment: when current knowledge needs to encounter engineering practice and vice versa

Modelling the primary drying step for the determination of the optimal dynamic heating pad temperature in a continuous pharmaceutical freeze-drying process for unit doses

Modelling the production and degradation of soluble microbial products (SMP) in membrane bioreactors (MBR).

Moisture and drug solid-state monitoring during a continuous drying process using empirical and mass balance models

Multi-point monitoring of nitrous oxide emissions in three full-scale conventional activated sludge tanks in Europe

Municipal wastewater effluent characterization and variability analysis in view of an ozone dose control strategy during tertiary treatment: The status in Belgium

Numerical Validation of a Population Balance Model Describing Cement Paste Rheology

On constitutive functions for hindered settling velocity in 1-D settler models: Selection of appropriate model structure.