Lista de obras - Regina G Palma Dibb - Dominio Público Uruguay

Acid demineralization susceptibility of dental enamel submitted to different bleaching techniques and fluoridation regimens

artículo científico publicado en 2014

Adhesion of a self-etching system to dental substrate prepared by Er:YAG laser or air abrasion.

artículo científico publicado en 2008

Adhesion to Er:YAG laser-prepared dentin after long-term water storage and thermocycling

artículo científico publicado en 2008

Analysis of adhesive interface in root canals irradiated by Er,Cr:YSGG laser after luting a fiber post.

artículo científico publicado en 2016

Analysis of surfaces and adhesive interfaces of enamel and dentin after different treatments

artículo científico publicado en 2007

Analysis of the Early Stages and Evolution of Dental Enamel Erosion.

artículo científico publicado en 2016

Assessing the surface roughness of a posterior resin composite: effect of surface sealing.

artículo científico publicado en 2003

Assessment of in vitro methods used to promote adhesive interface degradation: a critical review.

artículo científico publicado en 2007

Autogenous tooth fragment reattachment--association of periodontal surgery and endodontic and restorative procedures: a case report.

artículo científico publicado en 2004

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

artículo científico publicado en 2008

Bond strength of epoxy resin-based root canal sealer to human root dentin irradiated with Er,Cr:YSGG laser

artículo científico publicado en 2016

Bond strength of glass-ionomer cements to caries-affected dentin.

artículo científico publicado en 2003

Bond strength of self-etching primer and total-etch adhesive systems to primary dentin

scientific article published on 01 May 2004

Bond strength to dentin of primary teeth irradiated with varying Er:YAG laser energies and SEM examination of the surface morphology.

artículo científico publicado en 2004

Bonding agent underneath sealant: shear bond strength to oil-contaminated.

artículo científico publicado en 2010

Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy.

artículo científico publicado en 2004

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media.

artículo científico publicado en 2010

Chemical and morphological features of nanofilled composite resin: influence of finishing and polishing procedures and fluoride solutions

artículo científico publicado en 2011

Comparative study of the dentin/adhesive systems interface after treatment with Er:YAG laser and acid etching using scanning electron microscope.

artículo científico publicado en 2004

Comparison of marginal microleakage of flowable composite restorations in primary molars prepared by high-speed carbide bur, Er:YAG laser, and air abrasion.

artículo científico publicado en 2006

Composite filling removal with erbium:yttrium-aluminum-garnet laser: morphological analyses

artículo científico publicado en 2008

Composite resin color stability: influence of light sources and immersion media

artículo científico publicado en 2011

Consequences of Facial Hemangioma with Regard to Dental Treatment

artículo científico publicado en 2017

Dentin microhardness and subsurface morphology after Er:YAG laser cavity preparation using different parameters.

artículo científico publicado en 2009

Deposition of lead and cadmium released by cigarette smoke in dental structures and resin composite

scientific article published on 01 March 2011

Diode laser irradiation increases microtensile bond strength of dentin.

artículo científico publicado en 2014

Does laser diode irradiation improve the degree of conversion of simplified dentin bonding systems?

artículo científico publicado en 2017

Effect of Er:YAG laser on tensile bond strength of sealants in primary teeth.

artículo científico publicado en 2007

Effect of Er:YAG laser parameters on ablation capacity and morphology of primary enamel.

artículo científico publicado en 2009

Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials

artículo científico publicado en 2018

Effect of blood contamination on the shear bond strength at resin/dentin interface in primary teeth.

artículo científico publicado en 2008

Effect of cavity preparation method on microtensile bond strength of a self-etching primer vs phosphoric acid etchant to enamel

scientific article published on 09 June 2007

Effect of different diode laser wavelengths on root dentin decontamination infected with Enterococcus faecalis

artículo científico publicado en 2017

Effect of different root caries treatments on the sealing ability of conventional glass ionomer cement restorations.

artículo científico publicado en 2010

Effect of diode laser irradiation on the bond strength of polymerized non-simplified adhesive systems after 12 months of water storage

artículo científico publicado en 2018

Effect of energy and pulse repetition rate of Er: YAG laser on dentin ablation ability and morphological analysis of the laser-irradiated substrate.

artículo científico publicado en 2007

Effect of erbium-doped yttrium aluminium garnet laser parameters on ablation capacity and morphology of primary dentin

artículo científico publicado en 2009

Effect of erbium:yttrium-aluminum-garnet laser energies on superficial and deep dentin microhardness.

artículo científico publicado en 2008

Effect of individual or simultaneous curing on sealant bond strength

artículo científico publicado en 2005

Effect of pretreatment with an Er:YAG laser and fluoride on the prevention of dental enamel erosion

artículo científico publicado en 2013

Effect of sodium hypochlorite under several formulations on root canal dentin microhardness

artículo científico publicado en 2013

Effect of ultrasonic, sonic and rotating-oscillating powered toothbrushing systems on surface roughness and wear of white spot lesions and sound enamel: An in vitro study

artículo científico publicado en 2018

Effectiveness of home bleaching agents in discolored teeth and influence on enamel microhardness.

artículo científico publicado en 2009

Effects of water flow on ablation rate and morphological changes in human enamel and dentin after Er:YAG laser irradiation.

artículo científico publicado en 2012

Efficacy of different strategies to treat root dentin eroded by liquid or gaseous hydrochloric acid associated with brushing abrasion

artículo científico publicado en 2018

Enamel permeability and resistance to acid challenges after systemic use of sodium alendronate: a study in rat teeth.

artículo científico publicado en 2015

Evaluation of Surface Roughness and Bacterial Adhesion on Tooth Enamel Irradiated With High Intensity Lasers.

artículo científico publicado en 2017

Evaluation of dentin desensitization protocols on the dentinal surface and their effects on the dentin bond interface

artículo científico publicado en 2018

FT-Raman spectroscopy, µ-EDXRF spectrometry, and microhardness analysis of the dentin of primary and permanent teeth.

artículo científico publicado en 2018

In Vitro Evaluation of Dentin Hydraulic Conductance After 980 nm Diode Laser Irradiation.

artículo científico publicado en 2015

In vitro assessment of laser efficiency for caries prevention in pits and fissures ⬇️

artículo científico publicado el 1 de agosto de 2011

In vitro assessment of the acid resistance of demineralized enamel irradiated with Er, Cr:YSGG and Nd:YAG lasers

artículo científico publicado en 2014

In vitro bond strength of an epoxy resin-based root canal sealer to root dentin irradiated with high-power lasers and adhesive interface analyses

artículo científico publicado en 2017

In vitro evaluation of microleakage of a flowable composite in Class V restorations

artículo científico publicado en 2002

Indirect aesthetic adhesive restoration with fibre-reinforced composite resin.

artículo científico publicado en 2004

Influence of 0.05% sodium fluoride solutions on microhardness of resin-modified glass ionomer cements.

artículo científico publicado en 2006

Influence of Er,Cr:YSGG laser irradiation on enamel caries prevention.

artículo científico publicado en 2012

Influence of Er:YAG laser frequency on dentin caries removal capacity.

artículo científico publicado en 2011

Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel.

artículo científico publicado en 2005

Influence of Er:YAG laser on cavity preparation and surface treatment in microleakage of composite resin restorations

artículo científico publicado en 2006

Influence of air abrasion preparation on microleakage in glass ionomer cement restorations.

artículo científico publicado en 2004

Influence of energy and pulse repetition rate of Er:YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface

artículo científico publicado en 2008

Influence of laser irradiation on pits and fissures: an in situ study.

artículo científico publicado en 2013

Influence of mounthrinse solutions on the color stability and microhardness of a composite resin

artículo científico publicado en 2014

Influence of operating microscope in the sealing of cervical perforations.

artículo científico publicado en 2016

Influence of pulse repetition rate of Er:YAG laser and dentin depth on tensile bond strength of dentin-resin interface.

artículo científico publicado en 2008

Influence of pulse repetition rate on temperature rise and working time during composite filling removal with the Er:YAG laser

artículo científico publicado en 2008

Influence of salivary contamination on marginal microleakage of pit and fissure sealants.

artículo científico publicado en 2004

Influence of surface sealant on the color-stability of a composite resin immersed in different beverages

artículo científico publicado en 2014

Influence of the irradiation distance and the use of cooling to increase enamel-acid resistance with Er:YAG laser

artículo científico publicado en 2010

Influence of the use of Er:YAG laser for cavity preparation and surface treatment in microleakage of resin-modified glass ionomer restorations.

artículo científico publicado en 2004

Influence of toothbrushing on enamel softening and abrasive wear of eroded bovine enamel: an in situ study

scientific article published on 01 April 2006

Microhardness of composite resins at different depths varying the post-irradiation time.

artículo científico publicado en 2007

Microleakage in conservative cavities varying the preparation method and surface treatment.

artículo científico publicado en 2010

Microleakage on Class V glass ionomer restorations after cavity preparation with aluminum oxide air abrasion.

artículo científico publicado en 2005

Microstructure and mineral composition of dental enamel of permanent and deciduous teeth

artículo científico publicado en 2010

Morphological Study and Analysis of Microhardness and Permeability of the Furcation of Maxillary Premolars

artículo científico publicado en 2016

Nd:YAG laser in occlusal caries prevention of primary teeth: a randomized clinical trial.

artículo científico publicado en 2013

Oral hygiene indirect instruction and periodic reinforcements: effects on index plaque in schoolchildren.

artículo científico publicado en 2009

Peracetic acid as a single endodontic irrigant: effects on microhardness, roughness and erosion of root canal dentin

scientific article published on 13 December 2019

Physical and adhesive properties of dental enamel after radiotherapy and bonding of metal and ceramic brackets.

artículo científico publicado en 2015

Radiation therapy alters microhardness and microstructure of enamel and dentin of permanent human teeth

artículo científico publicado en 2014

Randomized, controlled trial comparing the retention of a flowable restorative system with a conventional resin sealant: one-year follow up.

artículo científico publicado en 2005

SEM analysis of enamel surface treated by Er:YAG laser: influence of irradiation distance.

artículo científico publicado en 2008

Shear bond strength of a sealant to contaminated-enamel surface: influence of erbium : yttrium-aluminum-garnet laser pretreatment

artículo científico publicado en 2008

Shear bond strength of adhesive systems to enamel and dentin. Thermocycling influence

artículo científico publicado en 2005

Shear bond strength of enamel surface treated with air-abrasive system

artículo científico publicado en 2002

Shear bond strength of glass-ionomer cements to air-abraded dentin

artículo científico publicado en 2006

Shear bond strength of pit-and-fissure sealants to saliva-contaminated and noncontaminated enamel

artículo científico publicado en 2005

Shear bond strength of self-etching and total-etch adhesive systems to Er:YAG laser-irradiated primary dentin.

artículo científico publicado en 2009

Shear strength of the bond to primary dentin: influence of Er:YAG laser irradiation distance

artículo científico publicado en 2010

Surface and subsurface erosion of primary enamel by acid beverages over time ⬇️

artículo científico publicado el 1 de enero de 2010

Surface roughness and bacterial adhesion on root dentin treated with diode laser and conventional desensitizing agents

artículo científico publicado en 2017

Temperature rise during Er:YAG cavity preparation of primary enamel.

artículo científico publicado en 2010

Tensile bond strength of different adhesive systems to enamel and dentin

artículo científico publicado en 2007

Tensile bond strength of self-etching adhesive systems to primary dentin

scientific article published on 01 December 2005

Tensile bond strength to primary dentin after different etching times.

artículo científico publicado en 2007

The combined use of Er,Cr:YSGG laser and fluoride to prevent root dentin demineralization

artículo científico publicado en 2014

The effect of radiation therapy on the mechanical and morphological properties of the enamel and dentin of deciduous teeth--an in vitro study

artículo científico publicado en 2014

The use of an Er:YAG laser to remove demineralized dentin and its influence on dentin permeability.

artículo científico publicado en 2012

Thermal effects and morphological aspects of human dentin surface irradiated with different frequencies of Er:YAG laser.

artículo científico publicado en 2012

Thermal effects and morphological aspects of varying Er:YAG laser energy on demineralized dentin removal: an in vitro study.

artículo científico publicado en 2014

Validity and reproducibility of different combinations of methods for occlusal caries detection: an in vitro comparison.

artículo científico publicado en 2006

Water flow on erbium:yttrium-aluminum-garnet laser irradiation: effects on dental tissues.

artículo científico publicado en 2008

Wear profile of canal wall surfaces and bond strength of endodontic sealers after in situ acid challenge.

artículo científico publicado en 2017

Lista de obras de Regina G Palma Dibb

Acid demineralization susceptibility of dental enamel submitted to different bleaching techniques and fluoridation regimens

Adhesion of a self-etching system to dental substrate prepared by Er:YAG laser or air abrasion.

Adhesion to Er:YAG laser-prepared dentin after long-term water storage and thermocycling

Analysis of adhesive interface in root canals irradiated by Er,Cr:YSGG laser after luting a fiber post.

Analysis of surfaces and adhesive interfaces of enamel and dentin after different treatments

Analysis of the Early Stages and Evolution of Dental Enamel Erosion.

Assessing the surface roughness of a posterior resin composite: effect of surface sealing.

Assessment of in vitro methods used to promote adhesive interface degradation: a critical review.

Autogenous tooth fragment reattachment--association of periodontal surgery and endodontic and restorative procedures: a case report.

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

Bond strength of epoxy resin-based root canal sealer to human root dentin irradiated with Er,Cr:YSGG laser

Bond strength of glass-ionomer cements to caries-affected dentin.

Bond strength of self-etching primer and total-etch adhesive systems to primary dentin

Bond strength to dentin of primary teeth irradiated with varying Er:YAG laser energies and SEM examination of the surface morphology.

Bonding agent underneath sealant: shear bond strength to oil-contaminated.

Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy.

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media.

Chemical and morphological features of nanofilled composite resin: influence of finishing and polishing procedures and fluoride solutions

Comparative study of the dentin/adhesive systems interface after treatment with Er:YAG laser and acid etching using scanning electron microscope.

Comparison of marginal microleakage of flowable composite restorations in primary molars prepared by high-speed carbide bur, Er:YAG laser, and air abrasion.

Composite filling removal with erbium:yttrium-aluminum-garnet laser: morphological analyses

Composite resin color stability: influence of light sources and immersion media

Consequences of Facial Hemangioma with Regard to Dental Treatment

Dentin microhardness and subsurface morphology after Er:YAG laser cavity preparation using different parameters.

Deposition of lead and cadmium released by cigarette smoke in dental structures and resin composite

Diode laser irradiation increases microtensile bond strength of dentin.

Does laser diode irradiation improve the degree of conversion of simplified dentin bonding systems?

Effect of Er:YAG laser on tensile bond strength of sealants in primary teeth.

Effect of Er:YAG laser parameters on ablation capacity and morphology of primary enamel.

Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials

Effect of blood contamination on the shear bond strength at resin/dentin interface in primary teeth.

Effect of cavity preparation method on microtensile bond strength of a self-etching primer vs phosphoric acid etchant to enamel

Effect of different diode laser wavelengths on root dentin decontamination infected with Enterococcus faecalis

Effect of different root caries treatments on the sealing ability of conventional glass ionomer cement restorations.

Effect of diode laser irradiation on the bond strength of polymerized non-simplified adhesive systems after 12 months of water storage

Effect of energy and pulse repetition rate of Er: YAG laser on dentin ablation ability and morphological analysis of the laser-irradiated substrate.

Effect of erbium-doped yttrium aluminium garnet laser parameters on ablation capacity and morphology of primary dentin

Effect of erbium:yttrium-aluminum-garnet laser energies on superficial and deep dentin microhardness.

Effect of individual or simultaneous curing on sealant bond strength

Effect of pretreatment with an Er:YAG laser and fluoride on the prevention of dental enamel erosion

Effect of sodium hypochlorite under several formulations on root canal dentin microhardness

Effect of ultrasonic, sonic and rotating-oscillating powered toothbrushing systems on surface roughness and wear of white spot lesions and sound enamel: An in vitro study

Effectiveness of home bleaching agents in discolored teeth and influence on enamel microhardness.

Effects of water flow on ablation rate and morphological changes in human enamel and dentin after Er:YAG laser irradiation.

Efficacy of different strategies to treat root dentin eroded by liquid or gaseous hydrochloric acid associated with brushing abrasion

Enamel permeability and resistance to acid challenges after systemic use of sodium alendronate: a study in rat teeth.

Evaluation of Surface Roughness and Bacterial Adhesion on Tooth Enamel Irradiated With High Intensity Lasers.

Evaluation of dentin desensitization protocols on the dentinal surface and their effects on the dentin bond interface

FT-Raman spectroscopy, µ-EDXRF spectrometry, and microhardness analysis of the dentin of primary and permanent teeth.

In Vitro Evaluation of Dentin Hydraulic Conductance After 980 nm Diode Laser Irradiation.

In vitro assessment of laser efficiency for caries prevention in pits and fissures ⬇️

In vitro assessment of the acid resistance of demineralized enamel irradiated with Er, Cr:YSGG and Nd:YAG lasers

In vitro bond strength of an epoxy resin-based root canal sealer to root dentin irradiated with high-power lasers and adhesive interface analyses

In vitro evaluation of microleakage of a flowable composite in Class V restorations

Indirect aesthetic adhesive restoration with fibre-reinforced composite resin.

Influence of 0.05% sodium fluoride solutions on microhardness of resin-modified glass ionomer cements.

Influence of Er,Cr:YSGG laser irradiation on enamel caries prevention.

Influence of Er:YAG laser frequency on dentin caries removal capacity.

Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel.

Influence of Er:YAG laser on cavity preparation and surface treatment in microleakage of composite resin restorations

Influence of air abrasion preparation on microleakage in glass ionomer cement restorations.

Influence of energy and pulse repetition rate of Er:YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface

Influence of laser irradiation on pits and fissures: an in situ study.

Influence of mounthrinse solutions on the color stability and microhardness of a composite resin

Influence of operating microscope in the sealing of cervical perforations.

Influence of pulse repetition rate of Er:YAG laser and dentin depth on tensile bond strength of dentin-resin interface.

Influence of pulse repetition rate on temperature rise and working time during composite filling removal with the Er:YAG laser

Influence of salivary contamination on marginal microleakage of pit and fissure sealants.

Influence of surface sealant on the color-stability of a composite resin immersed in different beverages

Influence of the irradiation distance and the use of cooling to increase enamel-acid resistance with Er:YAG laser

Influence of the use of Er:YAG laser for cavity preparation and surface treatment in microleakage of resin-modified glass ionomer restorations.

Influence of toothbrushing on enamel softening and abrasive wear of eroded bovine enamel: an in situ study

Microhardness of composite resins at different depths varying the post-irradiation time.

Microleakage in conservative cavities varying the preparation method and surface treatment.

Microleakage on Class V glass ionomer restorations after cavity preparation with aluminum oxide air abrasion.

Microstructure and mineral composition of dental enamel of permanent and deciduous teeth

Morphological Study and Analysis of Microhardness and Permeability of the Furcation of Maxillary Premolars

Nd:YAG laser in occlusal caries prevention of primary teeth: a randomized clinical trial.

Oral hygiene indirect instruction and periodic reinforcements: effects on index plaque in schoolchildren.