Lista de obras - Nick Silikas - Dominio Público Uruguay

3D-FE analysis of soft liner-acrylic interfaces under shear loading

artículo científico publicado en 2011

3D-marginal adaptation versus setting shrinkage in light-cured microhybrid resin composites

scientific article published on 09 March 2006

A laboratory evaluation of the physical and mechanical properties of selected root canal sealers.

artículo científico publicado en 2010

A mathematical model for simulating the bone remodeling process under mechanical stimulus.

artículo científico publicado en 2006

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

artículo científico publicado en 2017

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

artículo científico publicado en 2017

An ex situ study of the adsorption of calcium phosphate from solution onto TiO2(110) and Al2O3(0001)

Analysis of long-term monomer elution from bulk-fill and conventional resin-composites using high performance liquid chromatography

artículo científico publicado en 2015

Assessing Tensile Bond Strength Between Denture Teeth and Nano-Zirconia Impregnated PMMA Denture Base

scientific article published on 01 December 2020

Candidacidal effect of fluconazole and chlorhexidine released from acrylic polymer

artículo científico publicado en 2012

Chemical, mechanical and biological properties of contemporary composite surface sealers

artículo científico publicado en 2015

Chlorhexidine is a highly effective topical broad-spectrum agent against Candida spp.

artículo científico publicado en 2012

Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging.

artículo científico publicado en 2008

Comparative assessment of the roughness, hardness, and wear resistance of aesthetic bracket materials.

artículo científico publicado en 2005

Creep deformation of restorative resin-composites intended for bulk-fill placement

artículo científico publicado en 2012

Curing efficiency of high-intensity light-emitting diode (LED) devices.

artículo científico publicado en 2010

Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents

scientific article published on 02 November 2011

Degradation resistance of silorane, experimental ormocer and dimethacrylate resin-based dental composites

artículo científico publicado en 2011

Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals

artículo científico publicado en 2013

Development and testing of novel bisphenol A-free adhesives for lingual fixed retainer bonding

artículo científico publicado en 2015

Development of viscoelastic stability of resin-composites incorporating novel matrices

artículo científico publicado en 2015

Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles.

artículo científico publicado en 2010

Edge strength of indirect restorative materials

artículo científico publicado en 2009

Edge-strength of flowable resin-composites.

artículo científico publicado en 2008

Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite

artículo científico publicado en 2020

Effect of etching time and resin bond on the flexural strength of IPS e.max Press glass ceramic.

artículo científico publicado en 2014

Effect of extraoral aging conditions on mechanical properties of maxillofacial silicone elastomer.

artículo científico publicado en 2011

Effect of filler size and shape on local nanoindentation modulus of resin-composites.

artículo científico publicado en 2008

Effect of net fiber reinforcement surface treatment on soft denture liner retention and longevity

artículo científico publicado en 2010

Effect of new obturating materials on vertical root fracture resistance of endodontically treated teeth

artículo científico publicado en 2007

Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties

article

Effectiveness of self-adhesive luting cements in bonding to chlorhexidine-treated dentin

scientific article published on 26 December 2011

Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites

artículo científico publicado en 2020

Evaluation of root canal obturation: a three-dimensional in vitro study

artículo científico publicado en 2009

Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter

artículo científico publicado en 2007

Ex vivo surface and mechanical properties of coated orthodontic archwires.

artículo científico publicado en 2008

Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics

artículo científico publicado en 2011

Extended setting shrinkage behavior of endodontic sealers

artículo científico publicado en 2008

Finite element analysis of bonded model Class I 'restorations' after shrinkage

scientific article published on 29 October 2011

Fungicidal amounts of antifungals are released from impregnated denture lining material for up to 28 days

scientific article published on 03 March 2012

Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles ⬇️

artículo científico publicado el 26 de noviembre de 2010

Hygroscopic expansion kinetics of dental resin-composites

artículo científico publicado en 2013

Impregnation with antimicrobials challenge bonding properties and water sorption behaviour of an acrylic liner

artículo científico publicado en 2012

In vitro characterization of two laboratory-processed resin composites

artículo científico publicado en 2003

Initial versus final fracture of metal-free crowns, analyzed via acoustic emission

artículo científico publicado en 2008

Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva

scientific article published on 24 August 2020

Long-term sorption and solubility of bulk-fill and conventional resin-composites in water and artificial saliva

artículo científico publicado en 2015

Measurement of Fracture Strength of Zirconia Dental Implant Abutments with Internal and External Connections Using Acoustic Emission

scientific article published on 23 June 2019

Mechanical properties of coated superelastic archwires in conventional and self-ligating orthodontic brackets

scientific article published on 01 February 2010

Metallurgical characterization of experimental Ag-based soldering alloys

artículo científico publicado en 2014

Methacrylate- and silorane-based composite restorations: hardness, depth of cure and interfacial gap formation as a function of the energy dose.

artículo científico publicado en 2011

Micro-CT and FE-SEM enamel analyses of calcium-based agent application after bleaching.

artículo científico publicado en 2017

Micro-Raman spectroscopic analysis of TiO₂ phases on the root surfaces of commercial dental implants

artículo científico publicado en 2014

Multi-technique characterization of retrieved bone cement from revised total hip arthroplasties

artículo científico publicado en 2003

Multitechnique characterization of CPTi surfaces after electro discharge machining (EDM).

artículo científico publicado en 2013

Multitechnique characterization of conventional and experimental Ag-based brazing alloys for orthodontic applications.

artículo científico publicado en 2018

Nanoindentation creep versus bulk compressive creep of dental resin-composites

scientific article published on 20 September 2012

Nanomechanical properties of dental resin-composites

artículo científico publicado en 2012

Novel silane encapsulation system for tribochemical resin bonding to a Co-Cr alloy.

artículo científico publicado en 2016

Physical and chemical properties of model composites containing quaternary ammonium methacrylates

artículo científico publicado en 2017

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

artículo científico publicado en 2015

Polymerization shrinkage kinetics and shrinkage-stress in dental resin-composites

artículo científico publicado en 2016

Post-cure depth of cure of bulk fill dental resin-composites.

artículo científico publicado en 2013

Post-irradiation hardness development, chemical softening, and thermal stability of bulk-fill and conventional resin-composites

artículo científico publicado en 2014

Qualitative and quantitative characterization of monomers of uncured bulk-fill and conventional resin-composites using liquid chromatography/mass spectrometry.

artículo científico publicado en 2015

Resin-based composites show similar kinetic profiles for dimensional change and recovery with solvent storage.

artículo científico publicado en 2015

Rheological properties of resin composites according to variations in composition and temperature.

artículo científico publicado en 2014

Self-Etch Silane Primer: Reactivity and Bonding with a Lithium Disilicate Ceramic

artículo científico publicado en 2020

Sequential software processing of micro-XCT dental-images for 3D-FE analysis.

artículo científico publicado en 2009

Shrinkage Stresses Generated during Resin-Composite Applications: A Review

artículo científico publicado en 2009

Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction

artículo científico publicado en 2007

Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites

artículo científico publicado en 2015

Simultaneous Evaluation of Creep Deformation and Recovery of Bulk-Fill Dental Composites Immersed in Food-Simulating Liquids

scientific article published on 10 July 2018

Surface and bulk properties of dental resin- composites after solvent storage.

artículo científico publicado en 2016

Surface characterization of precious alloys treated with thione metal primers

artículo científico publicado en 2006

Surface characterization of zirconia dental implants

artículo científico publicado en 2009

Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)

scientific article published on 01 February 1999

Surface integrity of solvent-challenged ormocer-matrix composite

artículo científico publicado en 2010

Temperature-dependence of creep behaviour of dental resin-composites

artículo científico publicado en 2012

Tensile properties of orthodontic elastomeric chains

artículo científico publicado en 2004

The Effect of Cyclic Loading on the Compressive Strength of Core Build-Up Materials

artículo científico publicado en 2015

The effect of chewing simulation on surface roughness of resin composite when opposed by zirconia ceramic and lithium disilicate ceramic.

artículo científico publicado en 2017

The influence of nanoscale inorganic content over optical and surface properties of model composites.

artículo científico publicado en 2013

The relationship between cyclic hygroscopic dimensional changes and water sorption/desorption of self-adhering and new resin-matrix composites.

artículo científico publicado en 2013

Time-dependent visco-elastic creep and recovery of flowable composites

artículo científico publicado en 2007

Titanium orthodontic brackets: structure, composition, hardness and ionic release.

artículo científico publicado en 2004

Toward optimizing dental implant performance: Surface characterization of Ti and TiZr implant materials.

artículo científico publicado en 2016

Viscoelastic properties of orthodontic adhesives used for lingual fixed retainer bonding.

artículo científico publicado en 2016

Viscoelastic stability of resin-composites under static and dynamic loading

artículo científico publicado en 2011

Water sorption and solubility of core build-up materials.

artículo científico publicado en 2014

Lista de obras de Nick Silikas

3D-FE analysis of soft liner-acrylic interfaces under shear loading

3D-marginal adaptation versus setting shrinkage in light-cured microhybrid resin composites

A laboratory evaluation of the physical and mechanical properties of selected root canal sealers.

A mathematical model for simulating the bone remodeling process under mechanical stimulus.

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

An ex situ study of the adsorption of calcium phosphate from solution onto TiO2(110) and Al2O3(0001)

Analysis of long-term monomer elution from bulk-fill and conventional resin-composites using high performance liquid chromatography

Assessing Tensile Bond Strength Between Denture Teeth and Nano-Zirconia Impregnated PMMA Denture Base

Candidacidal effect of fluconazole and chlorhexidine released from acrylic polymer

Chemical, mechanical and biological properties of contemporary composite surface sealers

Chlorhexidine is a highly effective topical broad-spectrum agent against Candida spp.

Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging.

Comparative assessment of the roughness, hardness, and wear resistance of aesthetic bracket materials.

Creep deformation of restorative resin-composites intended for bulk-fill placement

Curing efficiency of high-intensity light-emitting diode (LED) devices.

Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents

Degradation resistance of silorane, experimental ormocer and dimethacrylate resin-based dental composites

Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals

Development and testing of novel bisphenol A-free adhesives for lingual fixed retainer bonding

Development of viscoelastic stability of resin-composites incorporating novel matrices

Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles.

Edge strength of indirect restorative materials

Edge-strength of flowable resin-composites.

Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite

Effect of etching time and resin bond on the flexural strength of IPS e.max Press glass ceramic.

Effect of extraoral aging conditions on mechanical properties of maxillofacial silicone elastomer.

Effect of filler size and shape on local nanoindentation modulus of resin-composites.

Effect of net fiber reinforcement surface treatment on soft denture liner retention and longevity

Effect of new obturating materials on vertical root fracture resistance of endodontically treated teeth

Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties

Effectiveness of self-adhesive luting cements in bonding to chlorhexidine-treated dentin

Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites

Evaluation of root canal obturation: a three-dimensional in vitro study

Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter

Ex vivo surface and mechanical properties of coated orthodontic archwires.

Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics

Extended setting shrinkage behavior of endodontic sealers

Finite element analysis of bonded model Class I 'restorations' after shrinkage

Fungicidal amounts of antifungals are released from impregnated denture lining material for up to 28 days

Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles ⬇️

Hygroscopic expansion kinetics of dental resin-composites

Impregnation with antimicrobials challenge bonding properties and water sorption behaviour of an acrylic liner

In vitro characterization of two laboratory-processed resin composites

Initial versus final fracture of metal-free crowns, analyzed via acoustic emission

Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva

Long-term sorption and solubility of bulk-fill and conventional resin-composites in water and artificial saliva

Measurement of Fracture Strength of Zirconia Dental Implant Abutments with Internal and External Connections Using Acoustic Emission

Mechanical properties of coated superelastic archwires in conventional and self-ligating orthodontic brackets

Metallurgical characterization of experimental Ag-based soldering alloys

Methacrylate- and silorane-based composite restorations: hardness, depth of cure and interfacial gap formation as a function of the energy dose.

Micro-CT and FE-SEM enamel analyses of calcium-based agent application after bleaching.

Micro-Raman spectroscopic analysis of TiO₂ phases on the root surfaces of commercial dental implants

Multi-technique characterization of retrieved bone cement from revised total hip arthroplasties

Multitechnique characterization of CPTi surfaces after electro discharge machining (EDM).

Multitechnique characterization of conventional and experimental Ag-based brazing alloys for orthodontic applications.

Nanoindentation creep versus bulk compressive creep of dental resin-composites

Nanomechanical properties of dental resin-composites

Novel silane encapsulation system for tribochemical resin bonding to a Co-Cr alloy.

Physical and chemical properties of model composites containing quaternary ammonium methacrylates

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

Polymerization shrinkage kinetics and shrinkage-stress in dental resin-composites

Post-cure depth of cure of bulk fill dental resin-composites.

Post-irradiation hardness development, chemical softening, and thermal stability of bulk-fill and conventional resin-composites

Qualitative and quantitative characterization of monomers of uncured bulk-fill and conventional resin-composites using liquid chromatography/mass spectrometry.

Resin-based composites show similar kinetic profiles for dimensional change and recovery with solvent storage.

Rheological properties of resin composites according to variations in composition and temperature.

Self-Etch Silane Primer: Reactivity and Bonding with a Lithium Disilicate Ceramic

Sequential software processing of micro-XCT dental-images for 3D-FE analysis.

Shrinkage Stresses Generated during Resin-Composite Applications: A Review

Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction

Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites

Simultaneous Evaluation of Creep Deformation and Recovery of Bulk-Fill Dental Composites Immersed in Food-Simulating Liquids

Surface and bulk properties of dental resin- composites after solvent storage.

Surface characterization of precious alloys treated with thione metal primers

Surface characterization of zirconia dental implants

Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)

Surface integrity of solvent-challenged ormocer-matrix composite

Temperature-dependence of creep behaviour of dental resin-composites