Lista de obras - Joël Cugnoni - Dominio Público Uruguay

A PSDT shell finite element formulation including structural damping

artículo científico publicado en 2010

A Study of the Shear Response of a Lead-Free Composite Solder by Experimental and Homogenization Techniques

artículo científico publicado en 2009

A toolbox of oligopeptide-modified polymers for tailored elastomers

artículo científico publicado en 2014

An experimental–numerical study of moisture absorption in an epoxy

artículo científico publicado en 2012

Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating

artículo científico publicado en 2010

Bone reactions to controlled loading of endosseous implants: a pilot study.

artículo científico publicado en 2008

Crack – fiber sensor interaction and characterization of the bridging tractions in mode I delamination

artículo científico publicado en 2011

Delamination detection and characterisation of bridging tractions using long FBG optical sensors

artículo científico publicado en 2007

Delamination in cross-ply laminates: Identification of traction–separation relations and cohesive zone modeling

article published in 2015

Durability Analysis of SnAgCu Solder Joints for an Aerospace Application

artículo científico publicado en 2008

Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens

artículo científico publicado en 2016

Experimental and numerical studies on size and constraining effects in lead-free solder joints

artículo científico publicado en 2007

External mechanical microstimuli modulate the osseointegration of titanium implants in rat tibiae

artículo científico publicado en 2013

Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol.

artículo científico publicado en 2013

High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors

artículo científico publicado en 2010

Hydro-mechanical coupling in the periodontal ligament: a porohyperelastic finite element model

artículo científico publicado en 2010

Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements

artículo científico publicado en 2004

Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio

artículo científico publicado en 2011

Identification of the matrix elastoplastic properties in reinforced active brazing alloys

artículo científico publicado en 2008

Implementation of the "loaded implant" model in the rat using a miniaturized setup--description of the method and first results

scientific article published on 06 December 2011

Improved modal characterization of the constitutive parameters in multilayered plates

artículo científico publicado en 2007

Influence of gait loads on implant integration in rat tibiae: experimental and numerical analysis

artículo científico publicado en 2014

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture

Interfacial Intermetallic Growth and Strength of Composite Lead-Free Solder Alloy Through Isothermal Aging

artículo científico publicado en 2008

Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates

artículo científico publicado en 2007

Isothermal Ageing of SnAgCu Solder Alloys: Three-Dimensional Morphometry Analysis of Microstructural Evolution and Its Effects on Mechanical Response

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization

artículo científico publicado en 2012

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification

artículo científico publicado en 2012

Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder

artículo científico publicado en 2013

Mixed mode fracture behavior of welded wood joints investigated with the Arcan test

Modal validation of a set of C0-compatible composite shell finite elements

artículo científico publicado en 2004

Modal validation of sandwich shell finite elements based on ap-order shear deformation theory including zigzag terms

artículo científico publicado en 2008

Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors

artículo científico publicado en 2013

Monitoring of composite structures using a network of integrated PVDF film transducers

artículo científico publicado en 2015

Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: A methodological study

artículo científico publicado en 2009

Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study

artículo científico publicado en 2008

Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing

Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure

Numerical and statistical estimates of the representative volume element of elastoplastic random composites

artículo científico publicado en 2012

Numerical prediction of peri-implant bone adaptation: Comparison of mechanical stimuli and sensitivity to modeling parameters

artículo científico publicado en 2016

Numerical-experimental identification of the elastic and damping properties in composite plates

artículo científico publicado en 2009

ON THE DEGREE OF CONVERSION AND COEFFICIENT OF THERMAL EXPANSION OF A SINGLE FIBER COMPOSITE USING A FBG SENSOR

artículo científico publicado en 2008

On the Mutual Effect of Viscoplasticity and Interfacial Damage Progression in Interfacial Fracture of Lead-Free Solder Joints

artículo científico publicado en 2011

Peri-implant bone adaptations to overloading in rat tibiae: experimental investigations and numerical predictions.

artículo científico publicado en 2016

Poroviscoelastic characterization of particle-reinforced gelatin gels using indentation and homogenization

artículo científico publicado en 2011

Semi-experimental Investigation of Bridging Tractions in Delamination

Size and Constraining Effects in Lead-Free Solder Joints

artículo científico publicado en 2006

Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite

Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis

Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing and numerical analysis

artículo científico publicado en 2011

Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures

The role of the fluid phase in the viscous response of bovine periodontal ligament

scientific article published on 24 February 2010

Thin ply composites: Experimental characterization and modeling of size-effects

Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography.

artículo científico publicado en 2010

Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance

artículo científico publicado en 2018

Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling

artículo científico publicado en 2011

Lista de obras de Joël Cugnoni

A PSDT shell finite element formulation including structural damping

A Study of the Shear Response of a Lead-Free Composite Solder by Experimental and Homogenization Techniques

A toolbox of oligopeptide-modified polymers for tailored elastomers

An experimental–numerical study of moisture absorption in an epoxy

Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating

Bone reactions to controlled loading of endosseous implants: a pilot study.

Crack – fiber sensor interaction and characterization of the bridging tractions in mode I delamination

Delamination detection and characterisation of bridging tractions using long FBG optical sensors

Delamination in cross-ply laminates: Identification of traction–separation relations and cohesive zone modeling

Durability Analysis of SnAgCu Solder Joints for an Aerospace Application

Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens

Experimental and numerical studies on size and constraining effects in lead-free solder joints

External mechanical microstimuli modulate the osseointegration of titanium implants in rat tibiae

Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol.

High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors

Hydro-mechanical coupling in the periodontal ligament: a porohyperelastic finite element model

Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements

Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio

Identification of the matrix elastoplastic properties in reinforced active brazing alloys

Implementation of the "loaded implant" model in the rat using a miniaturized setup--description of the method and first results

Improved modal characterization of the constitutive parameters in multilayered plates

Influence of gait loads on implant integration in rat tibiae: experimental and numerical analysis

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture

Interfacial Intermetallic Growth and Strength of Composite Lead-Free Solder Alloy Through Isothermal Aging

Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates

Isothermal Ageing of SnAgCu Solder Alloys: Three-Dimensional Morphometry Analysis of Microstructural Evolution and Its Effects on Mechanical Response

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification

Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder

Mixed mode fracture behavior of welded wood joints investigated with the Arcan test

Modal validation of a set of C0-compatible composite shell finite elements

Modal validation of sandwich shell finite elements based on ap-order shear deformation theory including zigzag terms

Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors

Monitoring of composite structures using a network of integrated PVDF film transducers

Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: A methodological study

Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study

Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing

Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure

Numerical and statistical estimates of the representative volume element of elastoplastic random composites

Numerical prediction of peri-implant bone adaptation: Comparison of mechanical stimuli and sensitivity to modeling parameters

Numerical-experimental identification of the elastic and damping properties in composite plates

ON THE DEGREE OF CONVERSION AND COEFFICIENT OF THERMAL EXPANSION OF A SINGLE FIBER COMPOSITE USING A FBG SENSOR

On the Mutual Effect of Viscoplasticity and Interfacial Damage Progression in Interfacial Fracture of Lead-Free Solder Joints

Peri-implant bone adaptations to overloading in rat tibiae: experimental investigations and numerical predictions.

Poroviscoelastic characterization of particle-reinforced gelatin gels using indentation and homogenization

Semi-experimental Investigation of Bridging Tractions in Delamination

Size and Constraining Effects in Lead-Free Solder Joints

Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite

Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis

Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing and numerical analysis

Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures

The role of the fluid phase in the viscous response of bovine periodontal ligament

Thin ply composites: Experimental characterization and modeling of size-effects

Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography.

Towards aerospace grade thin-ply composites: Effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance

Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling