Lista de obras - Ruth Wilcox - Dominio Público Uruguay

A Nondestructive Method to Distinguish the Internal Constituent Architecture of the Intervertebral Discs Using 9.4 Tesla Magnetic Resonance Imaging ⬇️

artículo científico publicado en 2015

A biomechanical investigation of vertebroplasty in osteoporotic compression fractures and in prophylactic vertebral reinforcement

artículo científico publicado en 2007

A dynamic study of thoracolumbar burst fractures

artículo científico publicado en 2003

A methodology for the generation and non-destructive characterisation of transverse fractures in long bones. ⬇️

artículo científico publicado en 2018

An In-Vitro Study of the Intervertebral Disc (IVD) Structure Using 3T Magnetic Resonance Imaging (MRI) ⬇️

artículo científico publicado en 2019

An analytical calculation of the fluid load support fraction in a biphasic material: An alternative technique ⬇️

artículo científico publicado el 5 de mayo de 2012

Assessment of a three-dimensional measurement technique for the porosity evaluation of PMMA bone cement

artículo científico publicado en 2006

Assessment of factors influencing finite element vertebral model predictions

artículo científico publicado en 2007

Biphasic investigation of contact mechanics in natural human hips during activities ⬇️

artículo científico publicado en 2014

Comparison between FEBio and Abaqus for biphasic contact problems ⬇️

scientific article published on 26 June 2013

Computational investigation of the time-dependent contact behaviour of the human tibiofemoral joint under body weight ⬇️

artículo científico publicado en 2014

Computational modelling of the natural hip: a review of finite element and multibody simulations

scientific article published on 27 May 2011

Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions ⬇️

artículo científico publicado en 2014

Derivation of inter-lamellar behaviour of the intervertebral disc annulus ⬇️

artículo científico publicado en 2015

Development of a bovine collagen–apatitic calcium phosphate cement for potential fracture treatment through vertebroplasty ⬇️

artículo científico publicado el 16 de julio de 2012

Development of calcium phosphate cement for the augmentation of traumatically fractured porcine specimens using vertebroplasty

artículo científico publicado en 2012

Dynamic virtual simulation of the occurrence and severity of edge loading in hip replacements associated with variation in the rotational and translational surgical position ⬇️

artículo científico publicado en 2017

Evaluation of a new approach for modelling the screw-bone interface in a locking plate fixation: a corroboration study ⬇️

artículo científico publicado en 2013

Examination of an in vitro methodology to evaluate the biomechanical performance of nucleus augmentation in axial compression ⬇️

artículo científico publicado en 2018

Experimental and computational approach investigating burst fracture augmentation using PMMA and calcium phosphate cements ⬇️

artículo científico publicado en 2014

Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. ⬇️

artículo científico publicado en 2014

Finite element analysis of the spine: towards a framework of verification, validation and sensitivity analysis

artículo científico publicado en 2008

Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: an initial study ⬇️

artículo científico publicado en 2015

Histopathology in 3D: From three-dimensional reconstruction to multi-stain and multi-modal analysis ⬇️

artículo científico publicado en 2015

Hydroxyapatite bone substitutes developed via replication of natural marine sponges

artículo científico publicado en 2009

Impaction grafted bone chip size effect on initial stability in an acetabular model: Mechanical evaluation

artículo científico publicado en 2013

Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: a finite element study with biphasic acetabular cartilage properties ⬇️

artículo científico publicado en 2014

Initiating factors for the onset of OA: A systematic review of animal bone and cartilage pathology in OA

artículo científico publicado en 2020

Long-term effects of vertebroplasty: adjacent vertebral fractures

artículo científico publicado en 2006

Mathematical model for the viscoelastic properties of dura mater

artículo científico publicado en 2003

Modelling cement augmentation: A comparative experimental and finite element study at the continuum level ⬇️

artículo científico publicado el 1 de enero de 2010

Modelling the failure precursor mechanism of lamellar fibrous tissues, example of the annulus fibrosus ⬇️

artículo científico publicado en 2016

Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables ⬇️

artículo científico publicado en 2015

Periprosthetic femoral fracture--a biomechanical comparison between Vancouver type B1 and B2 fixation methods ⬇️

artículo científico publicado en 2013

Periprosthetic fracture fixation of the femur following total hip arthroplasty: a review of biomechanical testing

artículo científico publicado en 2011

Preliminary biomechanical evaluation of prophylactic vertebral reinforcement adjacent to vertebroplasty under cyclic loading

artículo científico publicado en 2008

Rigid versus flexible plate fixation for periprosthetic femoral fracture-computer modelling of a clinical case

artículo científico publicado en 2011

Spinal cord-fragment interactions following burst fracture: an in vitro model

artículo científico publicado en 2006

Subject-specific multi-validation of a finite element model of ovine cervical functional spinal units ⬇️

artículo científico publicado en 2015

The biomechanical effectiveness of prophylactic vertebroplasty: a dynamic cadaveric study

artículo científico publicado en 2008

The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage ⬇️

artículo científico publicado en 2016

The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements ⬇️

artículo científico publicado en 2015

The effect of fracture stability on the performance of locking plate fixation in periprosthetic femoral fractures ⬇️

artículo científico publicado en 2013

The effect of surface finish and interstitial fluid on the cement-in-cement interface in revision surgery of the hip ⬇️

artículo científico publicado el 1 de febrero de 2011

The effects of geometric uncertainties on computational modelling of knee biomechanics ⬇️

artículo científico publicado en 2017

The influence of material property and morphological parameters on specimen-specific finite element models of porcine vertebral bodies

artículo científico publicado en 2006

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

artículo científico publicado en 2013

The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint ⬇️

artículo científico publicado en 2016

The use of preserved tissue in finite element modelling of fresh ovine vertebral behaviour

artículo científico publicado en 2012

Trabecular Level Analysis of Bone Cement Augmentation: A Comparative Experimental and Finite Element Study ⬇️

artículo científico publicado el 31 de mayo de 2012

Validation of a digital image processing software package for the in vivo measurement of wear in cemented Charnley total hip arthroplasties

artículo científico publicado en 2005

Vertebroplasty: Patient and treatment variations studied through parametric computational models ⬇️

artículo científico publicado en 2013

Lista de obras de Ruth Wilcox

A Nondestructive Method to Distinguish the Internal Constituent Architecture of the Intervertebral Discs Using 9.4 Tesla Magnetic Resonance Imaging ⬇️

A biomechanical investigation of vertebroplasty in osteoporotic compression fractures and in prophylactic vertebral reinforcement

A dynamic study of thoracolumbar burst fractures

A methodology for the generation and non-destructive characterisation of transverse fractures in long bones. ⬇️

An In-Vitro Study of the Intervertebral Disc (IVD) Structure Using 3T Magnetic Resonance Imaging (MRI) ⬇️

An analytical calculation of the fluid load support fraction in a biphasic material: An alternative technique ⬇️

Assessment of a three-dimensional measurement technique for the porosity evaluation of PMMA bone cement

Assessment of factors influencing finite element vertebral model predictions

Biphasic investigation of contact mechanics in natural human hips during activities ⬇️

Comparison between FEBio and Abaqus for biphasic contact problems ⬇️

Computational investigation of the time-dependent contact behaviour of the human tibiofemoral joint under body weight ⬇️

Computational modelling of the natural hip: a review of finite element and multibody simulations

Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions ⬇️

Derivation of inter-lamellar behaviour of the intervertebral disc annulus ⬇️

Development of a bovine collagen–apatitic calcium phosphate cement for potential fracture treatment through vertebroplasty ⬇️

Development of calcium phosphate cement for the augmentation of traumatically fractured porcine specimens using vertebroplasty

Dynamic virtual simulation of the occurrence and severity of edge loading in hip replacements associated with variation in the rotational and translational surgical position ⬇️

Evaluation of a new approach for modelling the screw-bone interface in a locking plate fixation: a corroboration study ⬇️

Examination of an in vitro methodology to evaluate the biomechanical performance of nucleus augmentation in axial compression ⬇️

Experimental and computational approach investigating burst fracture augmentation using PMMA and calcium phosphate cements ⬇️

Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. ⬇️

Finite element analysis of the spine: towards a framework of verification, validation and sensitivity analysis

Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: an initial study ⬇️

Histopathology in 3D: From three-dimensional reconstruction to multi-stain and multi-modal analysis ⬇️

Hydroxyapatite bone substitutes developed via replication of natural marine sponges

Impaction grafted bone chip size effect on initial stability in an acetabular model: Mechanical evaluation

Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: a finite element study with biphasic acetabular cartilage properties ⬇️

Initiating factors for the onset of OA: A systematic review of animal bone and cartilage pathology in OA

Long-term effects of vertebroplasty: adjacent vertebral fractures

Mathematical model for the viscoelastic properties of dura mater

Modelling cement augmentation: A comparative experimental and finite element study at the continuum level ⬇️

Modelling the failure precursor mechanism of lamellar fibrous tissues, example of the annulus fibrosus ⬇️

Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables ⬇️

Periprosthetic femoral fracture--a biomechanical comparison between Vancouver type B1 and B2 fixation methods ⬇️

Periprosthetic fracture fixation of the femur following total hip arthroplasty: a review of biomechanical testing

Preliminary biomechanical evaluation of prophylactic vertebral reinforcement adjacent to vertebroplasty under cyclic loading

Rigid versus flexible plate fixation for periprosthetic femoral fracture-computer modelling of a clinical case

Spinal cord-fragment interactions following burst fracture: an in vitro model

Subject-specific multi-validation of a finite element model of ovine cervical functional spinal units ⬇️

The biomechanical effectiveness of prophylactic vertebroplasty: a dynamic cadaveric study

The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage ⬇️

The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements ⬇️

The effect of fracture stability on the performance of locking plate fixation in periprosthetic femoral fractures ⬇️

The effect of surface finish and interstitial fluid on the cement-in-cement interface in revision surgery of the hip ⬇️

The effects of geometric uncertainties on computational modelling of knee biomechanics ⬇️

The influence of material property and morphological parameters on specimen-specific finite element models of porcine vertebral bodies

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint ⬇️

The use of preserved tissue in finite element modelling of fresh ovine vertebral behaviour

Trabecular Level Analysis of Bone Cement Augmentation: A Comparative Experimental and Finite Element Study ⬇️

Validation of a digital image processing software package for the in vivo measurement of wear in cemented Charnley total hip arthroplasties

Vertebroplasty: Patient and treatment variations studied through parametric computational models ⬇️