Lista de obras - Enrico Dall'Ara - Dominio Público Uruguay

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images ⬇️

artículo científico publicado el 1 de mayo de 2011

A new approach to comprehensively evaluate the morphological properties of the human femoral head: example of application to osteoarthritic joint

scientific article published on 26 March 2020

A new method to monitor bone geometry changes at different spatial scales in the longitudinal in vivo μCT studies of mice bones

artículo científico publicado en 2019

A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro ⬇️

artículo científico publicado el 14 de septiembre de 2012

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

artículo científico publicado en 2010

About the inevitable compromise between spatial resolution and accuracy of strain measurement for bone tissue: a 3D zero-strain study

artículo científico publicado en 2014

An accurate estimation of bone density improves the accuracy of subject-specific finite element models

artículo científico publicado en 2008

Analysis of Bone Architecture in Rodents Using Micro-Computed Tomography

scientific article published on 01 January 2019

Analysis of mechanotransduction dynamics during combined mechanical stimulation and modulation of the extracellular-regulated kinase cascade uncovers hidden information within the signalling noise

artículo científico publicado en 2020

Assessment of a novel biomechanical fracture model for distal radius fractures

artículo científico publicado en 2012

Assessment of transverse isotropy in clinical-level CT images of trabecular bone using the gradient structure tensor.

artículo científico publicado en 2014

Biomechanical assessment of vertebrae with lytic metastases with subject-specific finite element models

artículo científico publicado en 2019

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

scientific article published on 09 May 2011

Bone remodelling in the mouse tibia is spatio-temporally modulated by oestrogen deficiency and external mechanical loading: a combined in vivo/in silico study

scientific article published on 07 September 2020

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability.

artículo científico publicado en 2013

Clinical versus pre-clinical FE models for vertebral body strength predictions.

artículo científico publicado en 2012

Comparison of HR-pQCT- and microCT-based finite element models for the estimation of the mechanical properties of the calcaneus trabecular bone

artículo científico publicado en 2018

Comparison of femoral strength and fracture risk index derived from DXA-based finite element analysis for stratifying hip fracture risk: A cross-sectional study

artículo científico publicado en 2018

DXA predictions of human femoral mechanical properties depend on the load configuration.

artículo científico publicado en 2013

Development of a protocol to quantify local bone adaptation over space and time: Quantification of reproducibility.

artículo científico publicado en 2016

Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: An organ-level study

artículo científico publicado en 2016

Effect of SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical testing and digital volume correlation

artículo científico publicado en 2018

Effect of integration time on the morphometric, densitometric and mechanical properties of the mouse tibia

artículo científico publicado en 2017

Estimation of local anisotropy of plexiform bone: Comparison between depth sensing micro-indentation and Reference Point Indentation

artículo científico publicado en 2015

Evaluation of in-vivo measurement errors associated with micro-computed tomography scans by means of the bone surface distance approach.

artículo científico publicado en 2015

Experimental validation of DXA-based finite element models for prediction of femoral strength.

artículo científico publicado en 2016

Finite element analysis for prediction of bone strength

artículo científico publicado en 2013

From bed to bench: How in silico medicine can help ageing research

artículo científico publicado en 2018

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

artículo científico publicado el 24 de mayo de 2011

Heterogeneous Strain Distribution in the Subchondral Bone of Human Osteoarthritic Femoral Heads, Measured with Digital Volume Correlation

artículo científico publicado en 2020

Lathyrism-induced alterations in collagen cross-links influence the mechanical properties of bone material without affecting the mineral

artículo científico publicado en 2011

Local displacement and strain uncertainties in different bone types by digital volume correlation of synchrotron microtomograms.

artículo científico publicado en 2017

Longitudinal effects of Parathyroid Hormone treatment on morphological, densitometric and mechanical properties of mouse tibia.

artículo científico publicado en 2017

Longitudinal imaging of the ageing mouse

artículo científico publicado en 2016

Mapping anisotropy improves QCT-based finite element estimation of hip strength in pooled stance and side-fall load configurations

artículo científico publicado en 2018

Material Mapping of QCT-Derived Scapular Models: A Comparison with Micro-CT Loaded Specimens Using Digital Volume Correlation

scientific article published on 11 July 2019

Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements

artículo científico publicado en 2007

Micro Finite Element models of the vertebral body: Validation of local displacement predictions

artículo científico

Microindentation can discriminate between damaged and intact human bone tissue ⬇️

artículo científico publicado el 14 de enero de 2012

Multidirectional volar fixed-angle plating using cancellous locking screws for distal radius fractures--evaluation of three screw configurations in an extra-articular fracture model.

artículo científico publicado en 2011

Non-invasive prediction of the mouse tibia mechanical properties from microCT images: comparison between different finite element models

artículo científico publicado en 2021

OPG-Fc treatment in growing pigs leads to rapid reductions in bone resorption markers, serum calcium, and bone formation markers

artículo científico publicado en 2011

Orthotropic HR-pQCT-based FE models improve strength predictions for stance but not for side-way fall loading compared to isotropic QCT-based FE models of human femurs

artículo científico publicado en 2014

PTH(1-34) treatment and/or mechanical loading have different osteogenic effects on the trabecular and cortical bone in the ovariectomized C57BL/6 mouse

artículo científico publicado en 2020

Performance of QCT-Derived scapula finite element models in predicting local displacements using digital volume correlation

scientific article published on 14 May 2019

Prenatal growth map of the mouse knee joint by means of deformable registration technique

artículo científico publicado en 2019

Preservation of Bone Tissue Integrity with Temperature Control for In Situ SR-MicroCT Experiments

artículo científico publicado en 2018

QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA

article

Reduced tissue hardness of trabecular bone is associated with severe osteoarthritis

artículo científico publicado en 2011

Removal of the cortical endplates has little effect on ultimate load and damage distribution in QCT-based voxel models of human lumbar vertebrae under axial compression.

artículo científico publicado en 2012

Rotational stability in screw-fixed scaphoid fractures compared to plate-fixed scaphoid fractures

artículo científico publicado en 2016

Strain uncertainties from two digital volume correlation approaches in prophylactically augmented vertebrae: Local analysis on bone and cement-bone microstructures

artículo científico publicado en 2016

The Initial Slope of the Variogram, Foundation of the Trabecular Bone Score, Is Not or Is Poorly Associated With Vertebral Strength

artículo científico publicado en 2015

The effect of tissue condition and applied load on Vickers hardness of human trabecular bone

scientific article published on 27 June 2007

The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone.

artículo científico publicado en 2008

The longitudinal effects of ovariectomy on the morphometric, densitometric and mechanical properties in the murine tibia: A comparison between two mouse strains

artículo científico publicado en 2019

Three-dimensional local measurements of bone strain and displacement: comparison of three digital volume correlation approaches.

artículo científico publicado en 2015

Tissue properties of the human vertebral body sub-structures evaluated by means of microindentation.

artículo científico publicado en 2013

Uncertainties of synchrotron microCT-based digital volume correlation bone strain measurements under simulated deformation

scientific article published on 30 January 2019

Validation of an HR-pQCT-based homogenized finite element approach using mechanical testing of ultra-distal radius sections

artículo científico publicado en 2010

Validation of calcaneus trabecular microstructure measurements by HR-pQCT.

artículo científico publicado en 2017

Validation of finite element models of the mouse tibia using digital volume correlation

artículo científico publicado en 2018

Variability in strain distribution in the mice tibia loading model: A preliminary study using digital volume correlation

artículo científico publicado en 2018

Volar fixed-angle plating of extra-articular distal radius fractures--a biomechanical analysis comparing threaded screws and smooth pegs

scientific article published on 01 November 2010

Lista de obras de Enrico Dall'Ara

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images ⬇️

A new approach to comprehensively evaluate the morphological properties of the human femoral head: example of application to osteoarthritic joint

A new method to monitor bone geometry changes at different spatial scales in the longitudinal in vivo μCT studies of mice bones

A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro ⬇️

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

About the inevitable compromise between spatial resolution and accuracy of strain measurement for bone tissue: a 3D zero-strain study

An accurate estimation of bone density improves the accuracy of subject-specific finite element models

Analysis of Bone Architecture in Rodents Using Micro-Computed Tomography

Analysis of mechanotransduction dynamics during combined mechanical stimulation and modulation of the extracellular-regulated kinase cascade uncovers hidden information within the signalling noise

Assessment of a novel biomechanical fracture model for distal radius fractures

Assessment of transverse isotropy in clinical-level CT images of trabecular bone using the gradient structure tensor.

Biomechanical assessment of vertebrae with lytic metastases with subject-specific finite element models

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

Bone remodelling in the mouse tibia is spatio-temporally modulated by oestrogen deficiency and external mechanical loading: a combined in vivo/in silico study

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability.

Clinical versus pre-clinical FE models for vertebral body strength predictions.

Comparison of HR-pQCT- and microCT-based finite element models for the estimation of the mechanical properties of the calcaneus trabecular bone

Comparison of femoral strength and fracture risk index derived from DXA-based finite element analysis for stratifying hip fracture risk: A cross-sectional study

DXA predictions of human femoral mechanical properties depend on the load configuration.

Development of a protocol to quantify local bone adaptation over space and time: Quantification of reproducibility.

Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: An organ-level study

Effect of SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical testing and digital volume correlation

Effect of integration time on the morphometric, densitometric and mechanical properties of the mouse tibia

Estimation of local anisotropy of plexiform bone: Comparison between depth sensing micro-indentation and Reference Point Indentation

Evaluation of in-vivo measurement errors associated with micro-computed tomography scans by means of the bone surface distance approach.

Experimental validation of DXA-based finite element models for prediction of femoral strength.

Finite element analysis for prediction of bone strength

From bed to bench: How in silico medicine can help ageing research

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

Heterogeneous Strain Distribution in the Subchondral Bone of Human Osteoarthritic Femoral Heads, Measured with Digital Volume Correlation

Lathyrism-induced alterations in collagen cross-links influence the mechanical properties of bone material without affecting the mineral

Local displacement and strain uncertainties in different bone types by digital volume correlation of synchrotron microtomograms.

Longitudinal effects of Parathyroid Hormone treatment on morphological, densitometric and mechanical properties of mouse tibia.

Longitudinal imaging of the ageing mouse

Mapping anisotropy improves QCT-based finite element estimation of hip strength in pooled stance and side-fall load configurations

Material Mapping of QCT-Derived Scapular Models: A Comparison with Micro-CT Loaded Specimens Using Digital Volume Correlation

Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements

Micro Finite Element models of the vertebral body: Validation of local displacement predictions

Microindentation can discriminate between damaged and intact human bone tissue ⬇️

Multidirectional volar fixed-angle plating using cancellous locking screws for distal radius fractures--evaluation of three screw configurations in an extra-articular fracture model.

Non-invasive prediction of the mouse tibia mechanical properties from microCT images: comparison between different finite element models

OPG-Fc treatment in growing pigs leads to rapid reductions in bone resorption markers, serum calcium, and bone formation markers

Orthotropic HR-pQCT-based FE models improve strength predictions for stance but not for side-way fall loading compared to isotropic QCT-based FE models of human femurs

PTH(1-34) treatment and/or mechanical loading have different osteogenic effects on the trabecular and cortical bone in the ovariectomized C57BL/6 mouse

Performance of QCT-Derived scapula finite element models in predicting local displacements using digital volume correlation

Prenatal growth map of the mouse knee joint by means of deformable registration technique

Preservation of Bone Tissue Integrity with Temperature Control for In Situ SR-MicroCT Experiments

QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA

Reduced tissue hardness of trabecular bone is associated with severe osteoarthritis

Removal of the cortical endplates has little effect on ultimate load and damage distribution in QCT-based voxel models of human lumbar vertebrae under axial compression.

Rotational stability in screw-fixed scaphoid fractures compared to plate-fixed scaphoid fractures

Strain uncertainties from two digital volume correlation approaches in prophylactically augmented vertebrae: Local analysis on bone and cement-bone microstructures

The Initial Slope of the Variogram, Foundation of the Trabecular Bone Score, Is Not or Is Poorly Associated With Vertebral Strength

The effect of tissue condition and applied load on Vickers hardness of human trabecular bone

The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone.

The longitudinal effects of ovariectomy on the morphometric, densitometric and mechanical properties in the murine tibia: A comparison between two mouse strains

Three-dimensional local measurements of bone strain and displacement: comparison of three digital volume correlation approaches.

Tissue properties of the human vertebral body sub-structures evaluated by means of microindentation.

Uncertainties of synchrotron microCT-based digital volume correlation bone strain measurements under simulated deformation

Validation of an HR-pQCT-based homogenized finite element approach using mechanical testing of ultra-distal radius sections

Validation of calcaneus trabecular microstructure measurements by HR-pQCT.

Validation of finite element models of the mouse tibia using digital volume correlation

Variability in strain distribution in the mice tibia loading model: A preliminary study using digital volume correlation

Volar fixed-angle plating of extra-articular distal radius fractures--a biomechanical analysis comparing threaded screws and smooth pegs