Lista de obras - Andrea Lazzeri - Dominio Público Uruguay

A multinuclear solid-state magnetic resonance study of the interactions between the inorganic and organic coatings of BaSO4 submicronic particles.

artículo científico publicado en 2008

Bio-Based Electrospun Fibers for Wound Healing

scientific article published on 22 September 2020

Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability

artículo científico publicado en 2020

Chain Extension of Poly(Lactic Acid) (PLA)–Based Blends and Composites Containing Bran with Biobased Compounds for Controlling Their Processability and Recyclability

artículo científico publicado en 2021

Chitin Nanofibril Application in Tympanic Membrane Scaffolds to Modulate Inflammatory and Immune Response

scientific article published in 2021

Chitin Nanofibrils and Nanolignin as Functional Agents in Skin Regeneration

scientific article published on 30 May 2019

Chitin Nanofibrils in Poly(Lactic Acid) (PLA) Nanocomposites: Dispersion and Thermo-Mechanical Properties

artículo científico publicado en 2019

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Constrained Amorphous Interphase and Mechanical Properties of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

scientific article published on 19 November 2019

Cultural Heritage Documentation and Conservation: Three-Dimensional (3D) Laser Scanning and Geographical Information System (GIS) Techniques for Thematic Mapping of Facade Stonework of St. Nicholas Church (Pisa, Italy)

article

Design and Characterization of a Robotized Gearbox System Based on Voice Coil Actuators for a Formula SAE Race Car

article

Dilatational bands in rubber-toughened polymers

artículo científico publicado en 1993

Effect of a Bio-Based Dispersing Aid (Einar® 101) on PLA-Arbocel® Biocomposites: Evaluation of the Interfacial Shear Stress on the Final Mechanical Properties

scientific article published on 13 November 2020

Electronic Control System of a Formula SAE Gearbox Using Electric Voice Coil Actuators

article

Electrospinning Piezoelectric Fibers for Biocompatible Devices

scientific article published on 08 November 2019

Electrosprayed Chitin Nanofibril/Electrospun Polyhydroxyalkanoate Fiber Mesh as Functional Nonwoven for Skin Application

artículo científico publicado en 2020

Evaluation of Mechanical and Interfacial Properties of Bio-Composites Based on Poly(Lactic Acid) with Natural Cellulose Fibers

artículo científico publicado en 2019

Evaluation of Mussel Shells Powder as Reinforcement for PLA-Based Biocomposites

artículo científico publicado en 2020

Flat Die Extruded Biocompatible Poly(Lactic Acid) (PLA)/Poly(Butylene Succinate) (PBS) Based Films

artículo científico publicado en 2019

Gelatin-based blends and composites. Morphological and thermal mechanical characterization.

artículo científico publicado en 2001

Hydroxytyrosol rich-mixture from olive mill wastewater and production of green products by feeding Rhodopseudomonas sp. S16-FVPT5 with the residual effluent

artículo científico publicado en 2019

Improved Impact Properties in Poly(lactic acid) (PLA) Blends Containing Cellulose Acetate (CA) Prepared by Reactive Extrusion

artículo científico publicado en 2019

Improvement of the PLA Crystallinity and Heat Distortion Temperature Optimizing the Content of Nucleating Agents and the Injection Molding Cycle Time

artículo científico publicado en 2022

Lithium niobate nanoparticles as biofunctional interface material for inner ear devices

scientific article published on 20 May 2020

Monomers, Materials and Energy from Coffee By-Products: A Review

artículo científico publicado en 2021

Multifunctional Coatings for Robotic Implanted Device

scientific article published on 16 October 2019

New Bio-Composites Based on Polyhydroxyalkanoates and Posidonia oceanica Fibres for Applications in a Marine Environment.

artículo científico publicado en 2017

Novel Sustainable Composites Based on Poly(hydroxybutyrate-co-hydroxyvalerate) and Seagrass Beach-CAST Fibers: Performance and Degradability in Marine Environments.

artículo científico publicado en 2018

On the Use of Biobased Waxes to Tune Thermal and Mechanical Properties of Polyhydroxyalkanoates-Bran Biocomposites

scientific article published on 06 November 2020

Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion

artículo científico publicado en 2018

Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging

article

Pore Size Distribution and Blend Composition Affect In Vitro Prevascularized Bone Matrix Formation on Poly(Vinyl Alcohol)/Gelatin Sponges

article

Preparation and Compatibilization of PBS/Whey Protein Isolate Based Blends

scientific article published on 21 July 2020

Preparation of Innovative Skin Compatible Films to Release Polysaccharides for Biobased Beauty Masks

article by Maria-Beatrice Coltelli et al published 1 December 2018 in Cosmetics

Preparation of Water Suspensions of Nanocalcite for Cultural Heritage Applications.

artículo científico publicado en 2018

Processability and Degradability of PHA-Based Composites in Terrestrial Environments ⬇️

artículo científico publicado en 2019

Processing and Validation of Whey-Protein-Coated Films and Laminates at Semi-Industrial Scale as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

article published in 2013

Properties of Whey-Protein-Coated Films and Laminates as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

article

Pullulan for Advanced Sustainable Body- and Skin-Contact Applications

scientific article published on 18 March 2020

Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents

artículo científico publicado en 2016

Simulation of the plastic behavior of amorphous glassy bis-phenol-A-polycarbonate

scientific article published on 01 September 2004

Skin-Compatible Biobased Beauty Masks Prepared by Extrusion

scientific article published on 06 April 2020

Structure and surface coverage of water-based stearate coatings on calcium carbonate nanoparticles

scientific article published on 22 June 2011

Sustainable Micro and Nano Additives for Controlling the Migration of a Biobased Plasticizer from PLA-Based Flexible Films

scientific article published on 17 June 2020

Synergistic effects of nucleating agents and plasticizers on the crystallization behavior of poly(lactic acid).

artículo científico publicado en 2015

Thermal and Mechanical Properties of Biocomposites Made of Poly(3-hydroxybutyrate--3-hydroxyvalerate) and Potato Pulp Powder

artículo científico publicado en 2019

Thermal, Mechanical, Viscoelastic and Morphological Properties of Poly(lactic acid) based Biocomposites with Potato Pulp Powder Treated with Waxes

artículo científico publicado en 2019

Thermal, Mechanical, and Rheological Properties of Biocomposites Made of Poly(lactic acid) and Potato Pulp Powder ⬇️

artículo científico

Ventilatory and ECMO treatment of H1N1-induced severe respiratory failure: results of an Italian referral ECMO center.

artículo científico publicado en 2011

Whey and molasses as inexpensive raw materials for parallel production of biohydrogen and polyesters via a two-stage bioprocess: New routes towards a circular bioeconomy

scientific article published on 24 July 2019

Lista de obras de Andrea Lazzeri

A multinuclear solid-state magnetic resonance study of the interactions between the inorganic and organic coatings of BaSO4 submicronic particles.

Bio-Based Electrospun Fibers for Wound Healing

Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability

Chain Extension of Poly(Lactic Acid) (PLA)–Based Blends and Composites Containing Bran with Biobased Compounds for Controlling Their Processability and Recyclability

Chitin Nanofibril Application in Tympanic Membrane Scaffolds to Modulate Inflammatory and Immune Response

Chitin Nanofibrils and Nanolignin as Functional Agents in Skin Regeneration

Chitin Nanofibrils in Poly(Lactic Acid) (PLA) Nanocomposites: Dispersion and Thermo-Mechanical Properties

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Constrained Amorphous Interphase and Mechanical Properties of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

Cultural Heritage Documentation and Conservation: Three-Dimensional (3D) Laser Scanning and Geographical Information System (GIS) Techniques for Thematic Mapping of Facade Stonework of St. Nicholas Church (Pisa, Italy)

Design and Characterization of a Robotized Gearbox System Based on Voice Coil Actuators for a Formula SAE Race Car

Dilatational bands in rubber-toughened polymers

Effect of a Bio-Based Dispersing Aid (Einar® 101) on PLA-Arbocel® Biocomposites: Evaluation of the Interfacial Shear Stress on the Final Mechanical Properties

Electronic Control System of a Formula SAE Gearbox Using Electric Voice Coil Actuators

Electrospinning Piezoelectric Fibers for Biocompatible Devices

Electrosprayed Chitin Nanofibril/Electrospun Polyhydroxyalkanoate Fiber Mesh as Functional Nonwoven for Skin Application

Evaluation of Mechanical and Interfacial Properties of Bio-Composites Based on Poly(Lactic Acid) with Natural Cellulose Fibers

Evaluation of Mussel Shells Powder as Reinforcement for PLA-Based Biocomposites

Flat Die Extruded Biocompatible Poly(Lactic Acid) (PLA)/Poly(Butylene Succinate) (PBS) Based Films

Gelatin-based blends and composites. Morphological and thermal mechanical characterization.

Hydroxytyrosol rich-mixture from olive mill wastewater and production of green products by feeding Rhodopseudomonas sp. S16-FVPT5 with the residual effluent

Improved Impact Properties in Poly(lactic acid) (PLA) Blends Containing Cellulose Acetate (CA) Prepared by Reactive Extrusion

Improvement of the PLA Crystallinity and Heat Distortion Temperature Optimizing the Content of Nucleating Agents and the Injection Molding Cycle Time

Lithium niobate nanoparticles as biofunctional interface material for inner ear devices

Monomers, Materials and Energy from Coffee By-Products: A Review

Multifunctional Coatings for Robotic Implanted Device

New Bio-Composites Based on Polyhydroxyalkanoates and Posidonia oceanica Fibres for Applications in a Marine Environment.

Novel Sustainable Composites Based on Poly(hydroxybutyrate-co-hydroxyvalerate) and Seagrass Beach-CAST Fibers: Performance and Degradability in Marine Environments.

On the Use of Biobased Waxes to Tune Thermal and Mechanical Properties of Polyhydroxyalkanoates-Bran Biocomposites

Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion

Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging

Pore Size Distribution and Blend Composition Affect In Vitro Prevascularized Bone Matrix Formation on Poly(Vinyl Alcohol)/Gelatin Sponges

Preparation and Compatibilization of PBS/Whey Protein Isolate Based Blends

Preparation of Innovative Skin Compatible Films to Release Polysaccharides for Biobased Beauty Masks

Preparation of Water Suspensions of Nanocalcite for Cultural Heritage Applications.

Processability and Degradability of PHA-Based Composites in Terrestrial Environments ⬇️

Processing and Validation of Whey-Protein-Coated Films and Laminates at Semi-Industrial Scale as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

Properties of Whey-Protein-Coated Films and Laminates as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

Pullulan for Advanced Sustainable Body- and Skin-Contact Applications

Recyclability of PET/WPI/PE Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents

Simulation of the plastic behavior of amorphous glassy bis-phenol-A-polycarbonate

Skin-Compatible Biobased Beauty Masks Prepared by Extrusion

Structure and surface coverage of water-based stearate coatings on calcium carbonate nanoparticles

Sustainable Micro and Nano Additives for Controlling the Migration of a Biobased Plasticizer from PLA-Based Flexible Films

Synergistic effects of nucleating agents and plasticizers on the crystallization behavior of poly(lactic acid).

Thermal and Mechanical Properties of Biocomposites Made of Poly(3-hydroxybutyrate--3-hydroxyvalerate) and Potato Pulp Powder

Thermal, Mechanical, Viscoelastic and Morphological Properties of Poly(lactic acid) based Biocomposites with Potato Pulp Powder Treated with Waxes

Thermal, Mechanical, and Rheological Properties of Biocomposites Made of Poly(lactic acid) and Potato Pulp Powder ⬇️

Ventilatory and ECMO treatment of H1N1-induced severe respiratory failure: results of an Italian referral ECMO center.

Whey and molasses as inexpensive raw materials for parallel production of biohydrogen and polyesters via a two-stage bioprocess: New routes towards a circular bioeconomy