Lista de obras - Todd Stewart - Dominio Público Uruguay

(i) Biomechanics of the human hip – consequences for total hip replacement

scholarly article by E. Sariali et al published December 2008 in Orthopaedics and Trauma

3D surface reconstruction and FIB microscopy of worn alumina hip prostheses

A review of symptomatic leg length inequality following total hip arthroplasty ⬇️

artículo científico

An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads.

artículo científico publicado en 2002

Analysis of contact mechanics for composite cushion knee joint replacements ⬇️

artículo científico publicado el 1 de enero de 1998

Assessing reproducibility for radiographic measurement of leg length inequality after total hip replacement. ⬇️

artículo científico publicado en 2012

Bone anchors or interference screws? A biomechanical evaluation for autograft ankle stabilization

artículo científico publicado en 2004

Carbon-carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris.

artículo científico publicado en 2004

Cement mantle stress under retroversion torque at heel-strike.

artículo científico publicado en 2009

Characterization of worn alumina hip replacement prostheses

article

Contact pressure prediction in total knee joint replacements. Part 2: Application to the design of total knee joint replacements.

artículo científico publicado en 1995

Contact surface motion paths associated with leg length inequality following unilateral total hip replacement.

artículo científico publicado en 2012

Dynamic surface microstructural changes during tribological contact that determine the wear behaviour of hip prostheses: metals and ceramics.

artículo científico publicado en 2012

Effect of cup abduction angle and head lateral microseparation on contact stresses in ceramic-on-ceramic total hip arthroplasty.

artículo científico publicado en 2011

Experimental and theoretical study of the contact mechanics of five total knee joint replacements.

artículo científico publicado en 1995

Friction of composite cushion bearings for total knee joint replacements under adverse lubrication conditions ⬇️

artículo científico publicado el 1 de enero de 1997

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing. ⬇️

artículo científico publicado en 2014

In vitro investigation of friction under edge-loading conditions for ceramic-on-ceramic total hip prosthesis

artículo científico publicado en 2010

Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses.

artículo científico publicado en 2010

Long-term clinical, radiological and histopathological follow-up of a well-fixed Mckee-Farrar metal-on-metal total hip arthroplasty

artículo científico publicado en 2005

Long-term results of a total knee prosthesis utilising an all polyethylene tibial component ⬇️

artículo científico

Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions

artículo científico publicado en 2001

Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation.

artículo científico publicado en 2003

Metal-on-metal bearing wear with different swing phase loads

artículo científico publicado en 2004

Production tooling for polymer moulding using the RapidSteel process

article

Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation

artículo científico publicado en 2003

Spectral analysis of the sound produced during femoral broaching and implant insertion in uncemented total hip arthroplasty

artículo científico publicado en 2013

Spectral characterization of squeaking in ceramic-on-ceramic total hip arthroplasty: comparison of in vitro and in vivo values.

artículo científico publicado en 2011

Spinal angle and foot pressure during cardiac electrophysiological procedures. ⬇️

artículo científico publicado en 2014

Strong and light plaster casts?

artículo científico publicado en 2009

The effect of application time of two types of bone cement on the cement-bone interface strength. ⬇️

artículo científico publicado en 2014

The impact of surgeon handedness in total hip replacement ⬇️

artículo científico publicado en 2014

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

artículo científico publicado en 2013

The wear and fracture behaviour of ultra high molecular weight polyethylene subjected to gamma-irradiation in an atmosphere of acetylene.

artículo científico publicado en 2004

Three-dimensional modeling of in vitro hip kinematics under micro-separation regime for ceramic on ceramic total hip prosthesis: an analysis of vibration and noise.

artículo científico publicado en 2009

Undetected Fracture of an Alumina Ceramic on Ceramic Hip Prosthesis

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking ⬇️

artículo científico publicado en 2015

Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation.

artículo científico publicado en 2003

Wear and degradation on retrieved zirconia femoral heads ⬇️

artículo científico publicado en 2013

What Are the Biomechanical Effects of Half-pin and Fine-wire Configurations on Fracture Site Movement in Circular Frames? ⬇️

artículo científico publicado en 2015

What Are the Biomechanical Properties of the Taylor Spatial Frame™? ⬇️

artículo científico publicado en 2016

Lista de obras de Todd Stewart

(i) Biomechanics of the human hip – consequences for total hip replacement

3D surface reconstruction and FIB microscopy of worn alumina hip prostheses

A review of symptomatic leg length inequality following total hip arthroplasty ⬇️

An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads.

Analysis of contact mechanics for composite cushion knee joint replacements ⬇️

Assessing reproducibility for radiographic measurement of leg length inequality after total hip replacement. ⬇️

Bone anchors or interference screws? A biomechanical evaluation for autograft ankle stabilization

Carbon-carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris.

Cement mantle stress under retroversion torque at heel-strike.

Characterization of worn alumina hip replacement prostheses

Contact pressure prediction in total knee joint replacements. Part 2: Application to the design of total knee joint replacements.

Contact surface motion paths associated with leg length inequality following unilateral total hip replacement.

Dynamic surface microstructural changes during tribological contact that determine the wear behaviour of hip prostheses: metals and ceramics.

Effect of cup abduction angle and head lateral microseparation on contact stresses in ceramic-on-ceramic total hip arthroplasty.

Experimental and theoretical study of the contact mechanics of five total knee joint replacements.

Friction of composite cushion bearings for total knee joint replacements under adverse lubrication conditions ⬇️

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing. ⬇️

In vitro investigation of friction under edge-loading conditions for ceramic-on-ceramic total hip prosthesis

Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses.

Long-term clinical, radiological and histopathological follow-up of a well-fixed Mckee-Farrar metal-on-metal total hip arthroplasty

Long-term results of a total knee prosthesis utilising an all polyethylene tibial component ⬇️

Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions

Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation.

Metal-on-metal bearing wear with different swing phase loads

Production tooling for polymer moulding using the RapidSteel process

Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation

Spectral analysis of the sound produced during femoral broaching and implant insertion in uncemented total hip arthroplasty

Spectral characterization of squeaking in ceramic-on-ceramic total hip arthroplasty: comparison of in vitro and in vivo values.

Spinal angle and foot pressure during cardiac electrophysiological procedures. ⬇️

Strong and light plaster casts?

The effect of application time of two types of bone cement on the cement-bone interface strength. ⬇️

The impact of surgeon handedness in total hip replacement ⬇️

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

The wear and fracture behaviour of ultra high molecular weight polyethylene subjected to gamma-irradiation in an atmosphere of acetylene.

Three-dimensional modeling of in vitro hip kinematics under micro-separation regime for ceramic on ceramic total hip prosthesis: an analysis of vibration and noise.

Undetected Fracture of an Alumina Ceramic on Ceramic Hip Prosthesis

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking ⬇️

Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation.

Wear and degradation on retrieved zirconia femoral heads ⬇️

What Are the Biomechanical Effects of Half-pin and Fine-wire Configurations on Fracture Site Movement in Circular Frames? ⬇️

What Are the Biomechanical Properties of the Taylor Spatial Frame™? ⬇️