Lista de obras - Patrick D. Anderson - Dominio Público Uruguay

A 2D hysteretic DEM model for arbitrarily shaped polygonal particles

artículo científico publicado en 2021

A Numerical Study of Particle Migration and Sedimentation in Viscoelastic Couette Flow

artículo científico publicado en 2019

A chaotic serpentine mixer efficient in the creeping flow regime: from design concept to optimization

artículo científico publicado en 2009

A continuous roll-pulling approach for the fabrication of magnetic artificial cilia with microfluidic pumping capability

artículo científico publicado en 2016

A direct simulation method for flows with suspended paramagnetic particles

artículo científico publicado en 2008

A filament stretching rheometer for in situ X-ray experiments: Combining rheology and crystalline morphology characterization

scientific article published on 01 July 2020

A novel experimental setup for in situ optical and X-ray imaging of laser sintering of polymer particles

scientific article published on 01 August 2019

A numerical model for the development of the morphology of disperse blends in complex flow

artículo científico publicado en 2019

A numerical study of extensional flow‐induced crystallization in filament stretching rheometry

artículo científico publicado en 2020

A ternary model for double-emulsion formation in a capillary microfluidic device

artículo científico publicado en 2012

Active micromixer based on artificial cilia

artículo científico publicado en 2007

An extended finite element method for a diffuse-interface model

artículo científico publicado en 2014

Analysis and optimization of low-pressure drop static mixers

artículo científico publicado en 2009

Artificial cilia fabricated using magnetic fiber drawing generate substantial fluid flow

artículo científico publicado en 2014

Artificial cilia for active micro-fluidic mixing

artículo científico publicado en 2008

Behavior of viscoelastic models with thermal fluctuations

artículo científico publicado en 2020

Breaking of symmetry in microfluidic propulsion driven by artificial cilia

scientific article published on 25 August 2010

Chaotic advection in a cavity flow with rigid particles

Chaotic advection using passive and externally actuated particles in a serpentine channel flow

artículo científico publicado en 2007

Chaotic mixing induced by a magnetic chain in a rotating magnetic field.

artículo científico publicado en 2007

Chaotic mixing using periodic and aperiodic sequences of mixing protocols in a micromixer

artículo científico publicado en 2007

Characterization of structures of particles

artículo científico publicado en 2020

Contact mechanics of high-density polyethylene: Effect of pre-stretch on the frictional response and the onset of wear

artículo científico publicado en 2018

Contact mechanics of isotactic polypropylene: Effect of pre-stretch on the frictional response

artículo científico publicado en 2018

Designing Multi-Layer Polymeric Nanocomposites for EM Shielding in the X-Band

artículo científico publicado en 2018

Direct numerical simulation of a 2D-stented aortic heart valve at physiological flow rates.

artículo científico publicado en 2011

Direct numerical simulation of a bubble suspension in small amplitude oscillatory shear flow

Direct simulation of the dynamics of two spherical particles actuated magnetically in a viscous fluid

artículo científico publicado en 2013

Effect of low‐temperature physical aging on the dynamic transitions of atactic polystyrene in the glassy state

artículo científico publicado en 2019

Effect of particle-size dynamics on flow properties of dense spongy-particle systems

artículo científico publicado en 2018

Effect of particle-size dynamics on properties of dense spongy-particle systems: Approach towards equilibrium

artículo científico publicado en 2017

Eigenmode analysis of scalar transport in distributive mixing

artículo científico publicado en 2009

Erratum to: Modeling of complex interfaces for pendant drop experiments

artículo científico publicado en 2017

Extended finite element method for viscous flow inside complex three-dimensional geometries with moving internal boundaries

artículo científico publicado en 2011

Finite Element Modeling of a Viscous Fluid Flowing through an External Gear Pump

artículo científico publicado en 2020

Fluctuating viscoelasticity

artículo científico publicado en 2018

Fluid Flow and Distributive Mixing Analysis in the Cavity Transfer Mixer

artículo científico publicado en 2018

Fully implicit interface tracking for a viscous drop under simple shear

artículo científico publicado en 2019

Hydrostatic stress as indicator for wear initiation in polymer tribology

artículo científico publicado en 2019

Inertial flow effects in a micro-mixer based on artificial cilia

artículo científico publicado en 2009

Laser sintering of polymer particle pairs studied by in situ visualization

scientific article published on 01 February 2019

Magnetic interaction of Janus magnetic particles suspended in a viscous fluid

artículo científico publicado en 2016

Microfluidic Magnetic Mixing at Low Reynolds Numbers and in Stagnant Fluids

scientific article published on 29 October 2019

Mixing processes in the cavity transfer mixer: A thorough study

artículo científico publicado en 2017

Model Development and Validation of Crystallization Behavior in Injection Molding Prototype Flows

artículo científico publicado en 2009

Modeling of complex interfaces for pendant drop experiments

Modeling the shape dynamics of suspensions of permeable ellipsoidal particles

artículo científico publicado en 2018

Modelling flow induced crystallization of IPP: Multiple crystal phases and morphologies

artículo científico publicado en 2019

Monocytic cells become less compressible but more deformable upon activation

artículo científico publicado en 2014

Nature-inspired microfluidic propulsion using magnetic actuation.

artículo científico publicado en 2009

Numerical analysis of the crystallization kinetics in SLS

artículo científico publicado en 2020

Numerical investigation of the effect of insoluble surfactants on drop deformation and breakup in simple shear flow

artículo científico publicado en 2006

Numerical simulations of the polydisperse droplet size distribution of disperse blends in complex flow

artículo científico publicado en 2021

On the performance of static mixers: A quantitative comparison

artículo científico publicado en 2012

On the streamfunction–vorticity formulation in sliding bi-period frames: Application to bulk behavior for polymer blends

artículo científico publicado en 2006

On the validity of 2D analysis of non-isothermal sintering in SLS

artículo científico publicado en 2020

Optimizing the rotated arc mixer

artículo científico publicado en 2008

Out of the cleanroom, self-assembled magnetic artificial cilia

artículo científico publicado en 2013

Passive and Active Mixing in Microfluidic Devices

artículo científico publicado en 2009

Physical Ageing of Polystyrene: Does Tacticity Play a Role?

artículo científico publicado en 2019

Polarization modulated infrared spectroscopy: A pragmatic tool for polymer science and engineering

artículo científico publicado en 2020

Residual stresses in gas-assisted injection molding

artículo científico publicado en 2009

Shear-Induced Migration of Rigid Particles near an Interface between a Newtonian and a Viscoelastic Fluid

artículo científico publicado en 2017

Short-time behavior of advecting-diffusing scalar fields in Stokes flows.

artículo científico publicado en 2013

Simulation of Agglomerate Dispersion in Cubic Cavity Flow

artículo científico publicado en 2009

Simulation of bubble growth during the foaming process and mechanics of the solid foam

artículo científico publicado en 2019

Sintering of Two Viscoelastic Particles: A Computational Approach

artículo científico publicado en 2017

Stress relaxation of dense spongy-particle systems

artículo científico publicado en 2018

Structure formation in suspensions under uniform electric or magnetic field

artículo científico

Temperature dependent two-body abrasive wear of polycarbonate surfaces

artículo científico publicado en 2019

Temperature-dependent sintering of two viscous particles

artículo científico publicado en 2018

The Effect of Inertia on the Flow and Mixing Characteristics of a Chaotic Serpentine Mixer

artículo científico publicado en 2014

The deformation fields method revisited: Stable simulation of instationary viscoelastic fluid flow using integral models

artículo científico publicado en 2018

The effect of an adhesive interaction on predicting the scratch response of PS/PPO blends

artículo científico publicado en 2019

The mapping method as a toolbox to analyze, design, and optimize micromixers

artículo científico publicado en 2007

Thermo-mechanically coupled modelling of a single-asperity scratch on an isotropic isotactic polypropylene surface

artículo científico publicado en 2020

Tools to Simulate Distributive Mixing in Twin-Screw Extruders

artículo científico publicado en 2012

Towards unraveling the sintering process of two polystyrene particles by numerical simulations

artículo científico publicado en 2019

Transient dynamics of cold‐rolled and subsequently thermally rejuvenated atactic‐polystyrene using broadband dielectric spectroscopy

artículo científico publicado en 2020

Transient interfacial tension of partially miscible polymers.

artículo científico publicado en 2008

Two-scale model for the effect of physical aging in elastomers filled with hard nanoparticles

artículo científico publicado en 2017

Two-subsystem thermodynamics for the mechanics of aging amorphous solids

Understanding and Optimizing the SMX Static Mixer

scientific article published on 08 January 2009

Uniaxial and Biaxial Response of Anisotropic Polypropylene

artículo científico publicado en 2020

Viscoelastic fluid flow simulation using the contravariant deformation formulation

artículo científico publicado en 2019

Lista de obras de Patrick D. Anderson

A 2D hysteretic DEM model for arbitrarily shaped polygonal particles

A Numerical Study of Particle Migration and Sedimentation in Viscoelastic Couette Flow

A chaotic serpentine mixer efficient in the creeping flow regime: from design concept to optimization

A continuous roll-pulling approach for the fabrication of magnetic artificial cilia with microfluidic pumping capability

A direct simulation method for flows with suspended paramagnetic particles

A filament stretching rheometer for in situ X-ray experiments: Combining rheology and crystalline morphology characterization

A novel experimental setup for in situ optical and X-ray imaging of laser sintering of polymer particles

A numerical model for the development of the morphology of disperse blends in complex flow

A numerical study of extensional flow‐induced crystallization in filament stretching rheometry

A ternary model for double-emulsion formation in a capillary microfluidic device

Active micromixer based on artificial cilia

An extended finite element method for a diffuse-interface model

Analysis and optimization of low-pressure drop static mixers

Artificial cilia fabricated using magnetic fiber drawing generate substantial fluid flow

Artificial cilia for active micro-fluidic mixing

Behavior of viscoelastic models with thermal fluctuations

Breaking of symmetry in microfluidic propulsion driven by artificial cilia

Chaotic advection in a cavity flow with rigid particles

Chaotic advection using passive and externally actuated particles in a serpentine channel flow

Chaotic mixing induced by a magnetic chain in a rotating magnetic field.

Chaotic mixing using periodic and aperiodic sequences of mixing protocols in a micromixer

Characterization of structures of particles

Contact mechanics of high-density polyethylene: Effect of pre-stretch on the frictional response and the onset of wear

Contact mechanics of isotactic polypropylene: Effect of pre-stretch on the frictional response

Designing Multi-Layer Polymeric Nanocomposites for EM Shielding in the X-Band

Direct numerical simulation of a 2D-stented aortic heart valve at physiological flow rates.

Direct numerical simulation of a bubble suspension in small amplitude oscillatory shear flow

Direct simulation of the dynamics of two spherical particles actuated magnetically in a viscous fluid

Effect of low‐temperature physical aging on the dynamic transitions of atactic polystyrene in the glassy state

Effect of particle-size dynamics on flow properties of dense spongy-particle systems

Effect of particle-size dynamics on properties of dense spongy-particle systems: Approach towards equilibrium

Eigenmode analysis of scalar transport in distributive mixing

Erratum to: Modeling of complex interfaces for pendant drop experiments

Extended finite element method for viscous flow inside complex three-dimensional geometries with moving internal boundaries

Finite Element Modeling of a Viscous Fluid Flowing through an External Gear Pump

Fluctuating viscoelasticity

Fluid Flow and Distributive Mixing Analysis in the Cavity Transfer Mixer

Fully implicit interface tracking for a viscous drop under simple shear

Hydrostatic stress as indicator for wear initiation in polymer tribology

Inertial flow effects in a micro-mixer based on artificial cilia

Laser sintering of polymer particle pairs studied by in situ visualization

Magnetic interaction of Janus magnetic particles suspended in a viscous fluid

Microfluidic Magnetic Mixing at Low Reynolds Numbers and in Stagnant Fluids

Mixing processes in the cavity transfer mixer: A thorough study

Model Development and Validation of Crystallization Behavior in Injection Molding Prototype Flows

Modeling of complex interfaces for pendant drop experiments

Modeling the shape dynamics of suspensions of permeable ellipsoidal particles

Modelling flow induced crystallization of IPP: Multiple crystal phases and morphologies

Monocytic cells become less compressible but more deformable upon activation

Nature-inspired microfluidic propulsion using magnetic actuation.

Numerical analysis of the crystallization kinetics in SLS

Numerical investigation of the effect of insoluble surfactants on drop deformation and breakup in simple shear flow

Numerical simulations of the polydisperse droplet size distribution of disperse blends in complex flow

On the performance of static mixers: A quantitative comparison

On the streamfunction–vorticity formulation in sliding bi-period frames: Application to bulk behavior for polymer blends

On the validity of 2D analysis of non-isothermal sintering in SLS

Optimizing the rotated arc mixer

Out of the cleanroom, self-assembled magnetic artificial cilia

Passive and Active Mixing in Microfluidic Devices

Physical Ageing of Polystyrene: Does Tacticity Play a Role?

Polarization modulated infrared spectroscopy: A pragmatic tool for polymer science and engineering

Residual stresses in gas-assisted injection molding

Shear-Induced Migration of Rigid Particles near an Interface between a Newtonian and a Viscoelastic Fluid

Short-time behavior of advecting-diffusing scalar fields in Stokes flows.

Simulation of Agglomerate Dispersion in Cubic Cavity Flow

Simulation of bubble growth during the foaming process and mechanics of the solid foam

Sintering of Two Viscoelastic Particles: A Computational Approach

Stress relaxation of dense spongy-particle systems

Structure formation in suspensions under uniform electric or magnetic field

Temperature dependent two-body abrasive wear of polycarbonate surfaces

Temperature-dependent sintering of two viscous particles

The Effect of Inertia on the Flow and Mixing Characteristics of a Chaotic Serpentine Mixer

The deformation fields method revisited: Stable simulation of instationary viscoelastic fluid flow using integral models

The effect of an adhesive interaction on predicting the scratch response of PS/PPO blends

The mapping method as a toolbox to analyze, design, and optimize micromixers

Thermo-mechanically coupled modelling of a single-asperity scratch on an isotropic isotactic polypropylene surface

Tools to Simulate Distributive Mixing in Twin-Screw Extruders

Towards unraveling the sintering process of two polystyrene particles by numerical simulations

Transient dynamics of cold‐rolled and subsequently thermally rejuvenated atactic‐polystyrene using broadband dielectric spectroscopy