Filtros de búsqueda

Lista de obras de John L. Provis

29Si NMR study of structural ordering in aluminosilicate geopolymer gels

artículo científico publicado en 2005

A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation

artículo científico publicado en 2014

Accelerated carbonation testing of alkali-activated binders significantly underestimates service life: The role of pore solution chemistry

artículo científico publicado en 2012

Accelerated carbonation testing of alkali-activated slag/metakaolin blended concretes: effect of exposure conditions

artículo científico publicado en 2014

Activation of Metakaolin/Slag Blends Using Alkaline Solutions Based on Chemically Modified Silica Fume and Rice Husk Ash

artículo científico publicado en 2011

Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity ⬇️

Alkali aluminosilicate geopolymers as binders to encapsulate strontium-selective titanate ion-exchangers

artículo científico publicado en 2019

Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator ⬇️

Alkali-activation potential of biomass-coal co-fired fly ash ⬇️

article by Christopher R. Shearer et al published October 2016 in Cement and Concrete Composites

Atomistic Simulations of Geopolymer Models: The Impact of Disorder on Structure and Mechanics

artículo científico publicado en 2018

Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging

artículo científico publicado en 2007

Binder Chemistry – Blended Systems and Intermediate Ca Content

artículo científico publicado en 2013

Binder Chemistry – High-Calcium Alkali-Activated Materials

artículo científico publicado en 2013

Binder Chemistry – Low-Calcium Alkali-Activated Materials

Blast furnace slag-Mg(OH)2 cements activated by sodium carbonate ⬇️

scholarly article in RSC Advances, vol. 8 no. 41, 2018

Bubble stabilisation improves strength of lightweight mortars

Characterisation of Ba(OH)2–Na2SO4–blast furnace slag cement-like composites for the immobilisation of sulfate bearing nuclear wastes

artículo científico publicado en 2014

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

artículo científico publicado en 2015

Characterization of and Structural Insight into Struvite-K, MgKPO<sub>4</sub>·6H<sub>2</sub>O, an Analogue of Struvite

artículo científico publicado en 2020

Characterization of supplementary cementitious materials by thermal analysis ⬇️

Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars ⬇️

article

Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes

Combining density functional theory (DFT) and pair distribution function (PDF) analysis to solve the structure of metastable materials: the case of metakaolin

artículo científico publicado en 2010

Comment on E. Prud'Homme et al., “Structural characterization of geomaterial foams — Thermal behavior”, J. Non-Cryst. Solids, 2011

artículo científico publicado en 2012

Comparison of calorimetric methods for the assessment of slag cement hydration

journal article; published in Advances in Applied Ceramics in 2017

Composition–solubility–structure relationships in calcium (alkali) aluminosilicate hydrate (C-(N,K-)A-S-H)

article

Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides

artículo científico publicado en 2016

Corrigendum to “Thermodynamic modelling of alkali-activated slag-based cements” [Appl. Geochem. 61 (2015) 233–247]

artículo científico publicado en 2016

Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes

artículo científico publicado en 2014

Decarbonising the lime industry: State-of-the-art

artículo científico publicado en 2022

Density functional modeling of the local structure of kaolinite subjected to thermal dehydroxylation

artículo científico publicado en 2010

Density functional modelling of silicate and aluminosilicate dimerisation solution chemistry.

artículo científico publicado en 2010

Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques

artículo científico publicado en 2014

Development, Standardization, and Applications of Alkali-activated Concretes

artículo científico publicado en 2013

Dilatometry of geopolymers as a means of selecting desirable fly ash sources

artículo científico publicado en 2012

Distinctive microstructural features of aged sodium silicate-activated slag concretes

artículo científico publicado en 2014

Drying-induced changes in the structure of alkali-activated pastes

artículo científico publicado en 2013

Durability and Testing – Chemical Matrix Degradation Processes

artículo científico publicado en 2013

Durability and Testing – Degradation via Mass Transport

artículo científico publicado en 2013

Durability of Alkali-Activated Materials: Progress and Perspectives

artículo científico publicado en 2014

Editorial introduction – Journal of Sustainable Cement-Based Materials special issue on chemically activated materials

artículo científico publicado en 2015

Effect of Temperature on the Local Structure of Kaolinite Intercalated with Potassium Acetate

Effect of binder content on the performance of alkali-activated slag concretes

artículo científico publicado en 2011

Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder

artículo científico publicado en 2013

Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags

artículo científico publicado en 2010

Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions

article published in 2015

Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends

artículo científico publicado en 2012

Evaluation of the potential improvement in the environmental footprint of geopolymers using waste-derived activators ⬇️

Evolution of Local Structure in Geopolymer Gels: AnIn SituNeutron Pair Distribution Function Analysis

Evolution of binder structure in sodium silicate-activated slag-metakaolin blends

artículo científico publicado en 2011

Exploiting in-situ solid-state NMR spectroscopy to probe the early stages of hydration of calcium aluminate cement

scientific article published on 14 January 2019

Gamma irradiation resistance of an early age slag-blended cement matrix for nuclear waste encapsulation

artículo científico publicado en 2015

Gamma irradiation resistance of early age Ba(OH) 2 -Na 2 SO 4 -slag cementitious grouts ⬇️

Gaseous carbonation of cementitious backfill for geological disposal of radioactive waste: Nirex Reference Vault Backfill

Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation

artículo científico publicado en 2013

Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model

artículo científico publicado en 2013

Generalized biaxial shearing of MQMAS NMR spectra

artículo científico publicado en 2009

Geopolymers and Related Alkali-Activated Materials

artículo científico publicado en 2014

Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process

artículo científico publicado en 2013

Geopolymers for immobilization of Cr(6+), Cd(2+), and Pb(2+).

artículo científico publicado en 2008

Grand Challenges in Structural Materials

High-Resolution Nanoprobe X-ray Fluorescence Characterization of Heterogeneous Calcium and Heavy Metal Distributions in Alkali-Activated Fly Ash

artículo científico publicado en 2009

High-Resolution X-ray Diffraction and Fluorescence Microscopy Characterization of Alkali-Activated Slag-Metakaolin Binders

artículo científico publicado en 2013

Identification of the hydrate gel phases present in phosphate-modified calcium aluminate binders

artículo científico publicado en 2015

Immobilization of cesium with alkali-activated blast furnace slag

scientific article published on 27 November 2019

In situ ATR-FTIR study of the early stages of fly ash geopolymer gel formation

artículo científico publicado en 2007

In situ X-ray pair distribution function analysis of geopolymer gel nanostructure formation kinetics

artículo científico publicado en 2013

In situ synchrotron X-ray pair distribution function analysis of the early stages of gel formation in metakaolin-based geopolymers

article

Incorporation of strontium and calcium in geopolymer gels

artículo científico publicado en 2019

Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes

artículo científico publicado en 2013

Influence of slag composition on the stability of steel in alkali-activated cementitious materials ⬇️

article

Interactions between Simulant Vitrified Nuclear Wastes and high pH solutions: A Natural Analogue Approach

Layered double hydroxides modify the reaction of sodium silicate-activated slag cements

artículo científico publicado en 2018

Magnesia-Based Cements: A Journey of 150 Years, and Cements for the Future?

artículo científico

Management and valorisation of wastes through use in producing alkali-activated cement materials

artículo científico publicado en 2016

Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends

artículo científico publicado en 2011

MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders

artículo científico publicado en 2014

Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure

artículo científico publicado en 2012

Microstructure and durability of alkali-activated materials as key parameters for standardization

artículo científico publicado en 2014

Mimicking Biosintering: The Identification of Highly Condensed Surfaces in Bioinspired Silica Materials

artículo científico publicado en 2020

Modeling Speciation in Highly Concentrated Alkaline Silicate Solutions

Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash

artículo científico publicado en 2014

Molecular mechanisms responsible for the structural changes occurring during geopolymerization: Multiscale simulation

Nanostructural characterization of geopolymers by advanced beamline techniques

Natural carbonation of aged alkali-activated slag concretes

artículo científico publicado en 2013

One-Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends

artículo científico publicado en 2014

Other Potential Applications for Alkali-Activated Materials

Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements ⬇️

article by Paweł T. Durdziński et al published 7 February 2017 in Materials and Structures

Performance of alkali-activated slag mortars exposed to acids

artículo científico publicado en 2012

Phase Formation and Evolution in Mg(OH)2–Zeolite Cements ⬇️

Phase diagrams for alkali-activated slag binders ⬇️

Phase evolution of Na2O-Al2O3-SiO2-H2O gels in synthetic aluminosilicate binders

artículo científico publicado en 2016

Phase evolution of slag-rich cementitious grouts for immobilisation of nuclear wastes ⬇️

article published in 2018

Physical characterization methods for supplementary cementitious materials

artículo científico publicado en 2014

Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge ⬇️

Quantitative Mechanistic Modeling of Silica Solubility and Precipitation during the Initial Period of Zeolite Synthesis

Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped C3A in the presence of sulfates.

artículo científico publicado en 2011

Reduction of gold(III) chloride to gold(0) on silicate surfaces

artículo científico publicado en 2012

Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes ⬇️

artículo científico publicado en 2017

Response to the discussion by Hongyan Ma and Ying Li of the paper “Characterization of magnesium potassium phosphate cement blended with fly ash and ground granulated blast furnace slag”

article

Role of Microstructure and Surface Defects on the Dissolution Kinetics of CeO2, a UO2 Fuel Analogue

artículo científico publicado en 2016

Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders

artículo científico publicado en 2014

Role of soluble aluminum species in the activating solution for synthesis of silico-aluminophosphate geopolymers

scholarly article by Yan-Shuai Wang et al published October 2018 in Cement and Concrete Composites

Silica nanoparticle formation in the TPAOH-TEOS-H2O system: a population balance model

artículo científico publicado en 2006

Slag and Activator Chemistry Control the Reaction Kinetics of Sodium Metasilicate-Activated Slag Cements ⬇️

Slag-Based Cements That Resist Damage Induced by Carbon Dioxide ⬇️

Stoichiometrically controlled C–(A)–S–H/N–A–S–H gel blends via alkali-activation of synthetic precursors

journal article; published in Advances in Applied Ceramics in 2015

Structural Ordering of Aged and Hydrothermally Cured Metakaolin Based Potassium Geopolymers ⬇️

Structural evolution of an alkali sulfate activated slag cement

artículo científico publicado en 2016

Structural evolution of synthetic alkali-activated CaO-MgO-Na 2 O-Al 2 O 3 -SiO 2 materials is influenced by Mg content ⬇️

Structure and properties of binder gels formed in the system Mg(OH)2-SiO2-H2O for immobilisation of Magnox sludge.

artículo científico publicado en 2015

Structure of Portland Cement Pastes Blended with Sonicated Silica Fume

artículo científico publicado en 2012

Structure of kaolinite and influence of stacking faults: reconciling theory and experiment using inelastic neutron scattering analysis

artículo científico publicado en 2013

The Effects of Temperature on the Local Structure of Metakaolin-Based Geopolymer Binder: A Neutron Pair Distribution Function Investigation

The Interfacial Transition Zone in Alkali-Activated Slag Mortars

The Role of Al in Cross-Linking of Alkali-Activated Slag Cements

artículo científico publicado en 2014

The fate of iron in blast furnace slag particles during alkali-activation

artículo científico publicado en 2014

The role of inorganic polymer technology in the development of ‘green concrete’

article

Thermodynamic modelling of alkali-activated slag cements ⬇️

Time-resolved and spatially-resolved infrared spectroscopic observation of seeded nucleation controlling geopolymer gel formation

artículo científico publicado en 2011

Towards designing reactive glasses for alkali activation: Understanding the origins of alkaline reactivity of Na-Mg aluminosilicate glasses

artículo científico publicado en 2020

Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement

Valorisation of a kaolin mining waste for the production of geopolymers

artículo científico publicado en 2016

What Happens to 5 Year Old Metakaolin Geopolymers’ the Effect of Alkali Cation

artículo científico publicado en 2015

What is the structure of kaolinite? Reconciling theory and experiment

artículo científico publicado en 2009

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda