Lista de obras - Rafael Ratto Moraes - Dominio Público Uruguay

(Super)hydrophobic coating of orthodontic dental devices and reduction of early oral biofilm retention.

artículo científico publicado en 2015

22-Year clinical evaluation of the performance of two posterior composites with different filler characteristics.

artículo científico publicado en 2011

A Bibliometric Analysis of Articles Published in Brazilian Dental Journal over 30 years

artículo científico publicado en 2020

A biofilm cariogenic challenge model for dentin demineralization and dentin bonding analysis.

artículo científico publicado en 2014

A practice-based research network on the survival of ceramic inlay/onlay restorations

artículo científico publicado en 2016

A systematic review of factors associated with the retention of glass fiber posts.

artículo científico

Acid Etching and Surface Coating of Glass-Fiber Posts: Bond Strength and Interface Analysis

artículo científico publicado en 2016

Adhesion strategy and early bond strengths of glass-fiber posts luted into root canals

artículo científico publicado en 2012

Anterior composite restorations: A systematic review on long-term survival and reasons for failure.

artículo científico

Are Premixed Calcium Silicate-based Endodontic Sealers Comparable to Conventional Materials? A Systematic Review of In Vitro Studies.

artículo científico publicado en 2017

Are there universal restorative composites for anterior and posterior teeth?

artículo científico publicado en 2013

Bond Stability of Universal Adhesives Applied To Dentin Using Etch-And-Rinse or Self-Etch Strategies

artículo científico publicado en 2019

Bonding of Adhesive Luting Agents to Caries-affected Dentin Induced by a Microcosm Biofilm Model

artículo científico publicado en 2015

Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt

artículo científico publicado en 2013

Bonding self-adhesive resin cements to glass fibre posts: to silanate or not silanate? ⬇️

artículo científico publicado el 7 de abril de 2011

Bone tissue response to an MTA-based endodontic sealer, and the effect of the addition of calcium aluminate and silver particles

scientific article published on 15 May 2019

Brazilian Articles in Top-Tier Dental Journals and Influence of International Collaboration on Citation Rates

scientific article published on 22 July 2019

COVID-19 challenges to dentistry in the new pandemic epicenter: Brazil

artículo científico publicado en 2020

Carbamide peroxide bleaching agents: effects on surface roughness of enamel, composite and porcelain.

artículo científico publicado en 2005

Chemical cleaning agents and bonding to glass-fiber posts

artículo científico publicado en 2013

Comparative evaluation of dental resin composites based on micron- and submicron-sized monomodal glass filler particles

artículo científico publicado en 2013

Contamination of Composite Resin by Glove Powder and Saliva Contaminants: Impact on Mechanical Properties and Incremental Layer Debonding

artículo científico publicado en 2015

Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials.

artículo científico publicado en 2011

Cross-link density evaluation through softening tests: effect of ethanol concentration

scientific article published on 04 June 2007

Cytotoxicity of contemporary resin-based dental materials in contact with dentin

artículo científico publicado en 2020

Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED.

artículo científico publicado en 2010

Do nanofill or submicron composites show improved smoothness and gloss? A systematic review of in vitro studies.

artículo científico

Does translucency influence cure efficiency and color stability of resin-based composites?

scientific article published on 25 April 2018

Dual and self-curing potential of self-adhesive resin cements as thin films

artículo científico publicado en 2011

Effect of Diamond Bur Grit Size on Composite Repair.

artículo científico publicado en 2015

Effect of an acidic sodium salt on the polymerization behavior of self-adhesive resin cements formulated with different adhesive monomers

artículo científico publicado en 2018

Effect of cariogenic challenge on the stability of dentin bonds.

artículo científico publicado en 2014

Effect of etching time and light source on the bond strength of metallic brackets to ceramic.

artículo científico publicado en 2011

Effect of filling technique on the bond strength of methacrylate and silorane-based composite restorations.

artículo científico publicado en 2016

Effect of photoinitiator combinations on hardness, depth of cure, and color of model resin composites.

artículo científico publicado en 2015

Effect of thermally deposited siloxane-methacrylate coating on bonding to glass fibre posts.

artículo científico publicado en 2017

Flexural strength and reliability of monolithic and trilayer ceramic structures obtained by the CAD-on technique

artículo científico publicado en 2015

Hybridization morphology and dentin bond stability of self-etch primers with different ethanol/water ratios

artículo científico publicado en 2011

Impact of COVID-19 on gender gap in dental publications: a retrospective cohort with three Brazilian journals

artículo científico publicado en 2022

Impact of bracket displacement or rotation during bonding and time of removal of excess adhesive on the bracket-enamel bond strength

artículo científico publicado en 2014

Impact of curing protocol on the selected properties of a model bis-GMA/TEGDMA dental resin composite.

artículo científico publicado en 2009

Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents.

artículo científico publicado en 2009

Improved dental adhesive formulations based on reactive nanogel additives.

artículo científico publicado en 2011

Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt.

artículo científico publicado en 2013

In vivo biofilm formation on a soft denture liner in elderly patients with controlled diabetes

artículo científico publicado en 2010

In-depth polymerization of dual-cured resin cement assessed by hardness.

artículo científico publicado en 2008

Industry sponsorship bias in clinical trials in implant dentistry: Systematic review and meta-regression

scientific article published on 28 March 2019

Influence of inorganic filler content of resin luting agents and use of adhesive on the performance of bonded ceramic

artículo científico publicado en 2019

Influence of light-cured luting agents and associated factors on the color of ceramic laminate veneers: A systematic review of in vitro studies

scientific article published on 10 September 2018

Influence of photoinitiator system and nanofiller size on the optical properties and cure efficiency of model composites

artículo científico publicado en 2014

Influence of silane and solvated bonding agents on the bond strength to glass-fibre posts.

artículo científico publicado en 2011

Influence of viscosity and amine content on C==C conversion and color stability of experimental composites.

artículo científico publicado en 2015

Influence of whitening and regular dentifrices on orthodontic clear ligature color stability.

artículo científico publicado en 2015

Intra-radicular dentin treatments and retention of fiber posts with self-adhesive resin cements.

artículo científico publicado en 2013

Is a calcium hydroxide liner necessary in the treatment of deep caries lesions? - A systematic review and meta-analysis

artículo científico publicado en 2018

Light-activation of resin cement through ceramic: relationship between irradiance intensity and bond strength to dentin

scientific article published on 01 April 2008

Longevity of Bonding of Self-adhesive Resin Cement to Dentin

artículo científico publicado en 2016

Mechanical reliability of air-abraded and acid-etched bonded feldspar ceramic

artículo científico publicado en 2016

Methacrylate bonding to zirconia by in situ silica nanoparticle surface deposition.

artículo científico publicado en 2014

Mono or polycrystalline alumina-modified hybrid ceramics

artículo científico publicado en 2016

Nanoparticle loading level and properties of experimental hybrid resin luting agents.

artículo científico publicado en 2012

Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear

artículo científico publicado en 2016

Polymerization efficiency through translucent and opaque fiber posts and bonding to root dentin

artículo científico publicado en 2012

Preparation and evaluation of dental resin luting agents with increasing content of bisphenol-A ethoxylated dimethacrylate.

artículo científico publicado en 2008

Reliability and failure behavior of CAD-on fixed partial dentures

artículo científico publicado en 2016

Resin-based luting agents and color stability of bonded ceramic veneers.

artículo científico publicado en 2015

Response of composite resins to preheating and the resulting strengthening of luted feldspar ceramic

scientific article published on 03 August 2019

Sealing ability, water sorption, solubility and toothbrushing abrasion resistance of temporary filling materials.

artículo científico publicado en 2009

Shade of Resin-Based Luting Agents and Final Color of Porcelain Veneers

artículo científico publicado en 2016

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials.

artículo científico publicado en 2016

Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use

scientific article published on 03 June 2019

Strengthening of Porcelain Provided by Resin Cements and Flowable Composites

artículo científico publicado en 2015

Surface/interface morphology and bond strength to glass ceramic etched for different periods.

artículo científico publicado en 2010

Synthesis and characterization of poly(vinyl alcohol)/chondroitin sulfate composite hydrogels containing strontium-doped hydroxyapatite as promising biomaterials

artículo científico publicado en 2020

Synthesis of silver-containing calcium aluminate particles and their effects on a MTA-based endodontic sealer

artículo científico publicado en 2018

The progressive wear and abrasiveness of novel graded glass/zirconia materials relative to their dental ceramic counterparts

artículo científico publicado en 2019

Use of scientific evidence by dentists in Brazil: Room for improving the evidence-based practice

artículo científico publicado en 2018

Lista de obras de Rafael Ratto Moraes

(Super)hydrophobic coating of orthodontic dental devices and reduction of early oral biofilm retention.

22-Year clinical evaluation of the performance of two posterior composites with different filler characteristics.

A Bibliometric Analysis of Articles Published in Brazilian Dental Journal over 30 years

A biofilm cariogenic challenge model for dentin demineralization and dentin bonding analysis.

A practice-based research network on the survival of ceramic inlay/onlay restorations

A systematic review of factors associated with the retention of glass fiber posts.

Acid Etching and Surface Coating of Glass-Fiber Posts: Bond Strength and Interface Analysis

Adhesion strategy and early bond strengths of glass-fiber posts luted into root canals

Anterior composite restorations: A systematic review on long-term survival and reasons for failure.

Are Premixed Calcium Silicate-based Endodontic Sealers Comparable to Conventional Materials? A Systematic Review of In Vitro Studies.

Are there universal restorative composites for anterior and posterior teeth?

Bond Stability of Universal Adhesives Applied To Dentin Using Etch-And-Rinse or Self-Etch Strategies

Bonding of Adhesive Luting Agents to Caries-affected Dentin Induced by a Microcosm Biofilm Model

Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt

Bonding self-adhesive resin cements to glass fibre posts: to silanate or not silanate? ⬇️

Bone tissue response to an MTA-based endodontic sealer, and the effect of the addition of calcium aluminate and silver particles

Brazilian Articles in Top-Tier Dental Journals and Influence of International Collaboration on Citation Rates

COVID-19 challenges to dentistry in the new pandemic epicenter: Brazil

Carbamide peroxide bleaching agents: effects on surface roughness of enamel, composite and porcelain.

Chemical cleaning agents and bonding to glass-fiber posts

Comparative evaluation of dental resin composites based on micron- and submicron-sized monomodal glass filler particles

Contamination of Composite Resin by Glove Powder and Saliva Contaminants: Impact on Mechanical Properties and Incremental Layer Debonding

Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials.

Cross-link density evaluation through softening tests: effect of ethanol concentration

Cytotoxicity of contemporary resin-based dental materials in contact with dentin

Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED.

Do nanofill or submicron composites show improved smoothness and gloss? A systematic review of in vitro studies.

Does translucency influence cure efficiency and color stability of resin-based composites?

Dual and self-curing potential of self-adhesive resin cements as thin films

Effect of Diamond Bur Grit Size on Composite Repair.

Effect of an acidic sodium salt on the polymerization behavior of self-adhesive resin cements formulated with different adhesive monomers

Effect of cariogenic challenge on the stability of dentin bonds.

Effect of etching time and light source on the bond strength of metallic brackets to ceramic.

Effect of filling technique on the bond strength of methacrylate and silorane-based composite restorations.

Effect of photoinitiator combinations on hardness, depth of cure, and color of model resin composites.

Effect of thermally deposited siloxane-methacrylate coating on bonding to glass fibre posts.

Flexural strength and reliability of monolithic and trilayer ceramic structures obtained by the CAD-on technique

Hybridization morphology and dentin bond stability of self-etch primers with different ethanol/water ratios

Impact of COVID-19 on gender gap in dental publications: a retrospective cohort with three Brazilian journals

Impact of bracket displacement or rotation during bonding and time of removal of excess adhesive on the bracket-enamel bond strength

Impact of curing protocol on the selected properties of a model bis-GMA/TEGDMA dental resin composite.

Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents.

Improved dental adhesive formulations based on reactive nanogel additives.

Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt.

In vivo biofilm formation on a soft denture liner in elderly patients with controlled diabetes

In-depth polymerization of dual-cured resin cement assessed by hardness.

Industry sponsorship bias in clinical trials in implant dentistry: Systematic review and meta-regression

Influence of inorganic filler content of resin luting agents and use of adhesive on the performance of bonded ceramic

Influence of light-cured luting agents and associated factors on the color of ceramic laminate veneers: A systematic review of in vitro studies

Influence of photoinitiator system and nanofiller size on the optical properties and cure efficiency of model composites

Influence of silane and solvated bonding agents on the bond strength to glass-fibre posts.

Influence of viscosity and amine content on C==C conversion and color stability of experimental composites.

Influence of whitening and regular dentifrices on orthodontic clear ligature color stability.

Intra-radicular dentin treatments and retention of fiber posts with self-adhesive resin cements.

Is a calcium hydroxide liner necessary in the treatment of deep caries lesions? - A systematic review and meta-analysis

Light-activation of resin cement through ceramic: relationship between irradiance intensity and bond strength to dentin

Longevity of Bonding of Self-adhesive Resin Cement to Dentin

Mechanical reliability of air-abraded and acid-etched bonded feldspar ceramic

Methacrylate bonding to zirconia by in situ silica nanoparticle surface deposition.

Mono or polycrystalline alumina-modified hybrid ceramics

Nanoparticle loading level and properties of experimental hybrid resin luting agents.

Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear

Polymerization efficiency through translucent and opaque fiber posts and bonding to root dentin

Preparation and evaluation of dental resin luting agents with increasing content of bisphenol-A ethoxylated dimethacrylate.

Reliability and failure behavior of CAD-on fixed partial dentures

Resin-based luting agents and color stability of bonded ceramic veneers.

Response of composite resins to preheating and the resulting strengthening of luted feldspar ceramic

Sealing ability, water sorption, solubility and toothbrushing abrasion resistance of temporary filling materials.

Shade of Resin-Based Luting Agents and Final Color of Porcelain Veneers

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials.

Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use

Strengthening of Porcelain Provided by Resin Cements and Flowable Composites

Surface/interface morphology and bond strength to glass ceramic etched for different periods.

Synthesis and characterization of poly(vinyl alcohol)/chondroitin sulfate composite hydrogels containing strontium-doped hydroxyapatite as promising biomaterials

Synthesis of silver-containing calcium aluminate particles and their effects on a MTA-based endodontic sealer

The progressive wear and abrasiveness of novel graded glass/zirconia materials relative to their dental ceramic counterparts

Use of scientific evidence by dentists in Brazil: Room for improving the evidence-based practice