Filtros de búsqueda

Lista de obras de Peter D. Lee

4D-CT reconstruction with unified spatial-temporal patch-based regularization

article

A Computed Microtomography Method for Understanding Epiphyseal Growth Plate Fusion.

artículo científico publicado en 2018

A Multiscale 3D Model of the Vacuum Arc Remelting Process

A New Approach for Modelling Slag Infiltration and Solidification in a Continuous Casting Mould

article

A Unified Mechanism for the Formation of Oscillation Marks

article

A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering

artículo científico publicado en 2018

A correlative imaging based methodology for accurate quantitative assessment of bone formation in additive manufactured implants

artículo científico publicado en 2016

A fast-converging iterative method for X-ray in-line phase contrast tomography

article

A new mechanism for freckle initiation based on microstructural level simulation

A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials.

artículo científico publicado en 2014

A novel technique to incorporate structural prior information into multi-modal tomographic reconstruction

article

A review of techniques for visualising soft tissue microstructure deformation and quantifying strain Ex Vivo.

artículo científico publicado en 2018

Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks

scholarly article by Taek Bo Kim et al published November 2014 in Journal of Materials Processing Technology

An Iterative CT Reconstruction Algorithm for Fast Fluid Flow Imaging

artículo científico publicado en 2015

Anomalous α-Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy

Atomic Layer Deposition of a Silver Nanolayer on Advanced Titanium Orthopedic Implants Inhibits Bacterial Colonization and Supports Vascularized de Novo Bone Ingrowth

artículo científico publicado en 2017

Bioactive Glass Scaffolds with Hierarchical Structure and their 3D Characterization

Bioactive glass foam scaffolds are remodelled by osteoclasts and support the formation of mineralized matrix and vascular networks in vitro

artículo científico publicado en 2012

Bioactive glass scaffolds for bone regeneration and their hierarchical characterisation.

artículo científico publicado en 2010

Biotransformation of Silver Released from Nanoparticle Coated Titanium Implants Revealed in Regenerating Bone

artículo científico publicado en 2017

Bouncing and 3D printable hybrids with self-healing properties

Cellular automata model for the evolution of inert gas monolayers on a calcium (111) surface

Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling

scientific article published on 02 December 2009

Characterizing the hierarchical structures of bioactive sol–gel silicate glass and hybrid scaffolds for bone regeneration ⬇️

artículo científico publicado el 28 de marzo de 2012

Chemical characterisation and fabrication of chitosan–silica hybrid scaffolds with 3-glycidoxypropyl trimethoxysilane

article

Comparison of three-dimensional analysis and stereological techniques for quantifying lithium-ion battery electrode microstructures

artículo científico publicado en 2016

Compressive Strength of Bioactive Sol-Gel Glass Foam Scaffolds

Controlled microchannelling in dense collagen scaffolds by soluble phosphate glass fibers

artículo científico publicado en 2007

Correlative optical and X‐ray imaging of strain evolution during Double Torsion Fracture Toughness measurements in shale

scholarly article

Corrigendum to ‘Which wets TiB 2 inoculant particles: Al or Al 3 Ti?’ [J. Alloys Compd. 664 (2016) 460–468]

scholarly article published in Journal of Alloys and Compounds

Corrigendum to ‘‘Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting’’ [Mater. Sci. Eng. A 628(2015)188–197]

scholarly article published in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Cotton-wool-like bioactive glasses for bone regeneration.

artículo científico publicado en 2014

Crystallisation in basaltic magmas revealed via in situ 4D synchrotron X-ray microtomography.

artículo científico publicado en 2018

Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction

Dendritic solidification under natural and forced convection in binary alloys: 2D versus 3D simulation

Diversification of MgO//Mg interfacial crystal orientations during oxidation: A density functional theory study

Elucidation of differential mineralisation on native and regenerated silk matrices

artículo científico publicado en 2016

Employing temporal self-similarity across the entire time domain in computed tomography reconstruction

artículo científico publicado en 2015

Endochondral Growth Defect and Deployment of Transient Chondrocyte Behaviors Underlie Osteoarthritis Onset in a Natural Murine Model

artículo científico publicado en 2015

Evaluation of 3-D bioactive glass scaffolds dissolution in a perfusion flow system with X-ray microtomography

artículo científico publicado en 2011

Explicit Modelling of Slag Infiltration and Shell Formation during Mould Oscillation in Continuous Casting

article

Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting

article published in 2015

Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys

article

First-principles calculation of Mg/MgO interfacial free energies

Globule-Globule Interactions during Deformation in Semi-Solid Al-Cu Using Time-Resolved X-Ray Tomography

Heterogeneous nucleation of solid Al from the melt byAl3Ti: Molecular dynamics simulations

article

Heterogeneous nucleation of solid Al from the melt byTiB2andAl3Ti: Anab initiomolecular dynamics study

article

Hierarchical integration of porosity in shales

artículo científico publicado en 2018

Hierarchical porous materials for tissue engineering

artículo científico publicado en 2006

Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants.

artículo científico publicado en 2013

Hierarchically structured titanium foams for tissue scaffold applications

scientific article published on 30 June 2010

High-Density Protein Loading on Hierarchically Porous Layered Double Hydroxide Composites with a Rational Mesostructure

artículo científico publicado en 2016

High-energy, high-resolution, fly-scan X-ray phase tomography

scientific article published on 20 June 2019

Highly degradable porous melt-derived bioactive glass foam scaffolds for bone regeneration.

artículo científico publicado en 2017

Highly flexible silica/chitosan hybrid scaffolds with oriented pores for tissue regeneration

scientific article published on 03 September 2015

Imaging intact human organs with local resolution of cellular structures using hierarchical phase-contrast tomography

artículo científico publicado en 2021

Improvement of the Interdependence Analytical Model through Selection of Interfacial Growth Rates during the Initial Transient

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

artículo científico publicado en 2018

In situ characterization of nanoscale strains in loaded whole joints via synchrotron X-ray tomography

scientific article published on 25 November 2019

In situ microtensile testing and X-ray microtomography-based finite element modelling of open-cell metal foam struts and sandwich panels

In situ observation and analysis of ultrasonic capillary effect in molten aluminium.

artículo científico publicado en 2015

Industrial application of a numerical model to simulate lubrication, mould oscillation, solidification and defect formation during continuous casting

Influence of a Slow Rotating Magnetic Field in Thermoelectric Magnetohydrodynamic Processing of Alloys

Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

Insights into Ferric Leaching of Low Grade Metal Sulfide-Containing ores in an Unsaturated Ore Bed Using X-ray Computed Tomography

scholarly article by Katherine Dobson et al published 22 May 2017 in Minerals (Basel, Switzerland)

Investigating the effect of thermal gradients on stress in solid oxide fuel cell anodes using combined synchrotron radiation and thermal imaging

Investigating the evolving microstructure of lithium metal electrodes in 3D using X-ray computed tomography.

artículo científico publicado en 2017

John D. Hunt Symposium on Solidification Modeling and Microstructure Formation

Laser-matter interactions in additive manufacturing of SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging

Lasting organ-level bone mechanoadaptation is unrelated to local strain

scientific article published on 06 March 2020

Lithiation-Induced Dilation Mapping in a Lithium-Ion Battery Electrode by 3D X-Ray Microscopy and Digital Volume Correlation

article

Magma fragmentation in highly explosive basaltic eruptions induced by rapid crystallization

artículo científico publicado en 2019

Melt-derived bioactive glass scaffolds produced by a gel-cast foaming technique

article

Micro-CT characterization of structural features and deformation behavior of fly ash/aluminum syntactic foam

scholarly article by Qiang Zhang et al published June 2009 in Acta Materialia

Microstructural Simulations of the Influence of Solidification Velocity on Freckle Initiation during Directional Solidification

Microtomographic characterization of columnar Al–Cu dendrites for fluid flow and flow stress determination

Modeling of time dependent localized flow shear stress and its impact on cellular growth within additive manufactured titanium implants

artículo científico publicado en 2014

Modeling the investment casting of a titanium crown.

artículo científico publicado en 2006

Modeling the surface contamination of dental titanium investment castings.

artículo científico publicado en 2005

Modelling of light metals: from the atomic scale to the processing of automotive and aerospace components

Multi-scale 3D characterisation of porosity and organic matter in shales with variable TOC content and thermal maturity: Examples from the Lublin and Baltic Basins, Poland and Lithuania

article

Multimodal Image Reconstruction Using Supplementary Structural Information in Total Variation Regularization.

artículo científico publicado en 2014

Multiscale analyses reveal native-like lamellar bone repair and near perfect bone-contact with porous strontium-loaded bioactive glass.

artículo científico publicado en 2019

Multiscale modeling of the influence of Fe content in a Al–Si–Cu alloy on the size distribution of intermetallic phases and micropores

Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds

artículo científico publicado en 2006

Non-invasive imaging of the crystalline structure within a human tooth.

artículo científico publicado en 2013

Non-uniform temperature distribution in Li-ion batteries during discharge – A combined thermal imaging, X-ray micro-tomography and electrochemical impedance approach

Novel 3D centimetre-to nano-scale quantification of an organic-rich mudstone: The Carboniferous Bowland Shale, Northern England

article

Phase-contrast 3D tomography of HeLa cells grown in PLLA polymer electrospun scaffolds using synchrotron X-rays

artículo científico publicado en 2020

Preconditioned 70S30C bioactive glass foams promote osteogenesis in vivo

artículo científico publicado en 2013

Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction

Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation.

artículo científico publicado en 2015

Quantifying the 3D macrostructure of tissue scaffolds

artículo científico publicado en 2008

Quantitation of microcomputed tomography-imaged ocular microvasculature

artículo científico publicado en 2010

Quantitative characterization of porosity and determination of elastic modulus for sintered micro-silver joints

Quantitative measurement of olivine composition in three dimensions using helical-scan X-ray micro-tomography ⬇️

article

Rare earth oxides as nanoadditives in 3-D nanocomposite scaffolds for bone regeneration

Refinement and growth enhancement of Al2Cu phase during magnetic field assisting directional solidification of hypereutectic Al-Cu alloy

artículo científico publicado en 2016

Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy.

artículo científico publicado en 2016

Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography.

artículo científico publicado en 2014

Revelation of intertwining organic and inorganic fractal structures in polymer coatings.

artículo científico publicado en 2014

Review: The “butterfly effect” in continuous casting

article

Sexually dimorphic tibia shape is linked to natural osteoarthritis in STR/Ort mice.

artículo científico publicado en 2018

Silica–gelatin hybrids for tissue regeneration: inter-relationships between the process variables

article

Simulation of stray grain formation during single crystal seed melt-back and initial withdrawal in the Ni-base superalloy CMSX4

article

Simulation of the Columnar-to-Equiaxed Transition in Alloy Solidification - The Effect of Nucleation Undercooling, Density of Nuclei in Bulk Liquid and Alloy Solidification Range on the Transition

Solid-liquid interface free energy through metadynamics simulations

article

Sost Deficiency does not Alter Bone's Lacunar or Vascular Porosity in Mice.

artículo científico publicado en 2017

Stable sulforaphane protects against gait anomalies and modifies bone microarchitecture in the spontaneous STR/Ort model of osteoarthritis

artículo científico publicado en 2017

Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification

scholarly article by Chedtha Puncreobutr et al published 11 December 2012 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Synchrotron X-ray microtomography for assessment of bone tissue scaffolds

artículo científico publicado en 2009

Synchrotron X-ray tomographic quantification of microstructural evolution in ice cream – a multi-phase soft solid

scholarly article in RSC Advances, vol. 7 no. 25, 2017

Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al–10Cu melts

artículo científico publicado en 2016

Synchrotron tomographic quantification of strain and fracture during simulated thermal maturation of an organic-rich shale, UK Kimmeridge Clay

Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys

Synchrotron tomography of intervertebral disc deformation quantified by digital volume correlation reveals microstructural influence on strain patterns

artículo científico publicado en 2019

Temporal sparsity exploiting nonlocal regularization for 4D computed tomography reconstruction. ⬇️

artículo científico publicado en 2016

The Interdependence model of grain nucleation: A numerical analysis of the Nucleation-Free Zone

article

The dynamic nature of crystal growth in pores

artículo científico publicado en 2016

The influence of nanoparticles on dendritic grain growth in Mg alloys

Thermal imaging and stress analysis for predicting the behaviour and long-term performance of flare tips

Three-dimensional characterization of electrodeposited lithium microstructures using synchrotron X-ray phase contrast imaging

artículo científico publicado en 2015

Time-Resolved Tomographic Quantification of the Microstructural Evolution of Ice Cream

scientific article published on 19 October 2018

Transgranular liquation cracking of grains in the semi-solid state

artículo científico publicado en 2015

Transient peak-strain matching partially recovers the age-impaired mechanoadaptive cortical bone response

artículo científico publicado en 2018

Visualising the 3D microstructure of stained and native intervertebral discs using X-ray microtomography.

artículo científico publicado en 2017

Volcán de Colima dome collapse of July, 2015 and associated pyroclastic density currents ⬇️

article published in 2016

Which wets TiB 2 inoculant particles: Al or Al 3 Ti?

X-Ray Tomography and Small-Angle Neutron Scattering Characterization of Nano-Composites: Static and In Situ Experiments

article published in 2014

X-ray phase-contrast imaging with engineered porous materials over 50 keV. ⬇️

artículo científico publicado en 2018

“Simulation of Aluminum Shape Casting Processing: From Alloy Design to Mechanical Properties”

scholarly article by Qigui Wang et al published 1 September 2007 in Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda