Filtros de búsqueda

Lista de obras de Carlos José Soares

An Evaluation of the Light Output from 22 Contemporary Light Curing Units

artículo científico publicado en 2017

Apical Displacement and Residual Root Canal Filling with Single-Cone After Post Space Preparation: A Micro-CT Analysis

artículo científico publicado en 2020

Assessment in vitro of brushing on dental surface roughness alteration by laser interferometry

artículo científico publicado en 2008

Biomechanical Effect of Ferrule on Incisors Restored with a Fiberglass Post and Lithium-Disilicate Ceramic Crown after Thermal Cycling and Fatigue Loading.

artículo científico publicado en 2018

Biomechanical and morphological changes produced by ionizing radiation on bone tissue surrounding dental implant

scientific article published on 28 September 2020

Biomechanical behavior of maxillary premolars with conservative and traditional endodontic cavities

scientific article published on 01 January 2019

Bonding of Adhesive Luting Agents to Caries-affected Dentin Induced by a Microcosm Biofilm Model

artículo científico publicado en 2015

Can Silanization Increase the Retention of Glass-fiber posts? A Systematic Review and Meta-analysis of In Vitro Studies

artículo científico

Can intra-radicular cleaning protocols increase the retention of fiberglass posts? A systematic review

scientific article published on 15 March 2018

Can the cure time of endodontic sealers affect bond strength to root dentin?

artículo científico publicado en 2013

Chemical analysis of in vivo-irradiated dentine of head and neck cancer patients by ATR-FTIR and Raman spectroscopy

scientific article published on 04 December 2018

Common Operative Procedural Errors and Clinical Factors Associated with Root Canal Treatment

artículo científico

Correlation between polymerization stress and interfacial integrity of composites restorations assessed by different in vitro tests.

artículo científico publicado en 2014

Correlation between the Mechanical Properties and Structural Characteristics of Different Fiber Posts Systems

artículo científico publicado en 2016

Custom-Fitted EVA Mouthguards: what is the ideal thickness? a dynamic finite element impact study

artículo científico publicado en 2015

Decreased pituitary volume in patients with bipolar disorder

scientific article published on 01 August 2001

Degree of Conversion and Mechanical Properties of Resin Cements Cured Through Different All-Ceramic Systems.

artículo científico publicado en 2015

Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes.

artículo científico publicado en 2017

Dental trauma on primary teeth at different root resorption stages-A dynamic finite element impact analysis of the effect on the permanent tooth germ

scientific article published on 15 January 2019

Does MTA affect fiber post retention in repaired cervical root canal perforations?

artículo científico publicado en 2016

Effect of Dentin Pretreatment on Bond Strength Stability of Self-etching and Etch-and-Rinse Adhesives to Intracoronally Bleached Dentin.

artículo científico publicado en 2016

Effect of Endodontic Sealer in Young Molars Treated by Undergraduate Students - A Randomized Clinical Trial

scientific article published on 01 November 2020

Effect of Light Activation of Pulp-Capping Materials and Resin Composite on Dentin Deformation and the Pulp Temperature Change.

artículo científico publicado en 2017

Effect of Magnification during Post Space Preparation on Root Cleanness and Fiber Post Bond Strength

artículo científico publicado en 2019

Effect of Occlusal Splints on the Stress Distribution on the Temporomandibular Joint Disc

artículo científico publicado en 2017

Effect of Orthodontic Bracket Type and Mouthguard Presence on the Stress and Strain during a Frontal Impact

artículo científico publicado en 2020

Effect of Photoactivation Timing on the Mechanical Properties of Resin Cements and Bond Strength of Fiberglass Post to Root Dentin

artículo científico publicado en 2015

Effect of Restorative Protocol on Cuspal Strain and Residual Stress in Endodontically Treated Molars.

artículo científico publicado en 2015

Effect of ScLL and 15d-PGJ2 on viability and cytokine release in LPS-stimulated fibroblasts: an in vitro study

scientific article published on 17 February 2020

Effect of Simulated Pulpal Microcirculation on Temperature When Light Curing Bulk Fill Composites

artículo científico publicado en 2018

Effect of acidic drinks on shade matching, surface topography, and mechanical properties of conventional and bulk-fill composite resins

artículo científico publicado en 2019

Effect of cavity preparation design and ceramic type on the stress distribution, strain and fracture resistance of CAD/CAM onlays in molars

artículo científico publicado en 2018

Effect of ethanol-wet bonding on porosity and retention of fiberglass post to root dentin

scientific article published on 27 March 2020

Effect of fluoride application during radiotherapy on enamel demineralization

artículo científico publicado en 2018

Effect of gamma irradiation and restorative material on the biomechanical behaviour of root filled premolars

artículo científico publicado en 2011

Effect of gamma radiation on bonding to human enamel and dentin.

artículo científico publicado en 2012

Effect of gutta-percha solvents on fiberglass post bond strength to root canal dentin.

artículo científico publicado en 2014

Effect of joint design and welding type on the flexural strength and weld penetration of Ti-6Al-4V alloy bars.

artículo científico publicado en 2015

Effect of light sources and curing mode techniques on sorption, solubility and biaxial flexural strength of a composite resin.

artículo científico publicado en 2012

Effect of ozone application on the resin-dentin microtensile bond strength

scientific article published on 22 August 2011

Effect of post type and restorative techniques on the strain and fracture resistance of flared incisor roots

scientific article published on 01 January 2011

Effect of punch and orifice base sizes in different push-out test setups: stress distribution analysis

artículo científico publicado en 2015

Effect of root canal sealer and artificial accelerated aging on fibreglass post bond strength to intraradicular dentin

artículo científico publicado en 2014

Effect of selective carious tissue removal on biomechanical behavior of class II bulk-fill dental composite restorations

artículo científico publicado en 2018

Effect of silane type and air-drying temperature on bonding fiber post to composite core and resin cement.

artículo científico publicado en 2014

Effect of specimen gripping device, geometry and fixation method on microtensile bond strength, failure mode and stress distribution: laboratory and finite element analyses

artículo científico publicado en 2012

Effect of surface treatment of fiberglass posts on bond strength to root dentin

artículo científico publicado en 2014

Effect of surface treatments of laboratory-fabricated composites on the microtensile bond strength to a luting resin cement

artículo científico publicado en 2004

Effect of temperature and humidity on post-gel shrinkage, cusp deformation, bond strength and shrinkage stress - Construction of a chamber to simulate the oral environment.

artículo científico publicado en 2015

Effect of the crown, post, and remaining coronal dentin on the biomechanical behavior of endodontically treated maxillary central incisors.

artículo científico publicado en 2013

Effect of topical application of dipyrone on dental sensitivity reduction after in-office dental bleaching: A randomized, triple-blind multicenter clinical trial.

artículo científico publicado en 2018

Effects of Lectin (ScLL) on osteoclast-like multinucleated giant cells' maturation-A preliminary in vitro study

artículo científico publicado en 2018

Effects of etching on zircon grains and its implications for the fission track method.

artículo científico publicado en 2012

Esthetic rehabilitation of anterior teeth affected by enamel hypoplasia: a case report

artículo científico publicado en 2002

Etching a fiber post surface with high-concentration bleaching agents

artículo científico publicado en 2013

Evaluation of Eye Protection Filters Used with Broad-Spectrum and Conventional LED Curing Lights

artículo científico publicado en 2017

Evaluation of a dentoalveolar model for testing mouthguards: stress and strain analyses.

artículo científico publicado en 2015

Ferrule Design Does Not Affect the Biomechanical Behavior of Anterior Teeth Under Mechanical Fatigue: An In Vitro Evaluation

scientific article published on 10 October 2018

Flexural modulus, flexural strength, and stiffness of fiber-reinforced posts

artículo científico publicado en 2009

Fracture resistance and stress distribution of simulated immature teeth after apexification with mineral trioxide aggregate

artículo científico publicado en 2014

Fractured alveolar process displacement evaluation - effect of the rigidity of wire-composite splints

artículo científico publicado en 2020

How biomechanics can affect the endodontic treated teeth and their restorative procedures?

artículo científico publicado en 2018

Impact of rehabilitation with metal-ceramic restorations on oral health-related quality of life.

artículo científico publicado en 2012

Improved glucose control and reduced body weight in rodents with dual mechanism of action peptide hybrids.

artículo científico publicado en 2013

Incremental filling technique and composite material--part I: cuspal deformation, bond strength, and physical properties

artículo científico publicado en 2013

Incremental filling technique and composite material--part II: shrinkage and shrinkage stresses.

artículo científico publicado en 2013

Influence of Emission Spectrum and Irradiance on Light Curing of Resin-Based Composites.

artículo científico publicado en 2017

Influence of Hemostatic Solution on Bond Strength and Physicochemical Properties of Resin Cement.

artículo científico publicado en 2017

Influence of Resin Cements on Color Stability of Different Ceramic Systems

artículo científico publicado en 2017

Influence of abutment screw design and surface coating on the bending flexural strength of the implant set

scientific article published on 17 January 2012

Influence of bone defect position and span in 3-point bending tests: experimental and finite element analysis

artículo científico publicado en 2020

Influence of cavity preparation design on fracture resistance of posterior Leucite-reinforced ceramic restorations.

artículo científico publicado en 2006

Influence of ceramic veneer thickness and antagonist on impact stresses during dental trauma with and without a mouthguard assessed with finite element analysis

scientific article published on 20 November 2020

Influence of core-finishing intervals on tensile strength of cast posts-and-cores luted with zinc phosphate cement.

artículo científico publicado en 2012

Influence of crosshead speed on failure load and failure mode of restored maxillary premolars.

artículo científico publicado en 2015

Influence of drying protocol with isopropyl alcohol on the bond strength of resin-based sealers to the root dentin

artículo científico publicado en 2014

Influence of endodontic sealer cement on fibreglass post bond strength to root dentine.

artículo científico publicado en 2008

Influence of impacted canines on the stress distribution during dental trauma with and without a mouthguard

scientific article published on 11 June 2019

Influence of method and period of storage on the microtensile bond strength of indirect composite resin restorations to dentine.

artículo científico publicado en 2008

Influence of powder/liquid ratio on the radiodensity and diametral tensile strength of glass ionomer cements

artículo científico publicado en 2010

Influence of radiotherapy on the dentin properties and bond strength.

artículo científico publicado en 2017

Influence of resin cement and post configuration on bond strength to root dentine

scientific article published on 13 October 2011

Influence of root embedment material and periodontal ligament simulation on fracture resistance tests

artículo científico publicado en 2005

Influence of sterilization method on the bond strength of caries-affected dentin.

artículo científico

Influence of the endodontic treatment on mechanical properties of root dentin

scientific article published on 26 March 2007

Influence of the feldspathic ceramic thickness and shade on the microhardness of dual resin cement

scientific article published on 01 May 2006

Influence of the shape core on custom cast dowel and core removal by ultrasonic energy

artículo científico publicado en 2007

Inorganic particle analysis of dental impression elastomers.

artículo científico publicado en 2010

Irradiance and Radiant Exposures Delivered by LED Light-Curing Units Used by a Left and Right-Handed Operator.

artículo científico publicado en 2018

Marginal integrity and microleakage of direct and indirect composite inlays: SEM and stereomicroscopic evaluation.

artículo científico publicado en 2005

Mechanical properties of light-curing composites polymerized with different laboratory photo-curing units.

artículo científico publicado en 2007

Mechanical properties, shrinkage stress, cuspal strain and fracture resistance of molars restored with bulk-fill composites and incremental filling technique

artículo científico publicado en 2015

Micro-Raman spectroscopic characterization of a CR-39 detector.

artículo científico publicado en 2013

Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing technique.

artículo científico publicado en 2014

Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system.

artículo científico publicado en 2014

Microstructural and mechanical analysis of two CAD-CAM lithium disilicate glass-reinforced ceramics

artículo científico publicado en 2020

Microtensile bond strength of methacrylate and silorane resins to enamel and dentin

artículo científico publicado en 2014

Molar cusp deformation evaluated by micro-CT and enamel crack formation to compare incremental and bulk-filling techniques

artículo científico publicado en 2018

Multiple-peak and single-peak dental curing lights comparison on the wear resistance of bulk-fill composites

scientific article published on 17 December 2018

Novel exenatide analogs with peptidic albumin binding domains: potent anti-diabetic agents with extended duration of action

artículo científico publicado en 2014

Polymerization shrinkage stress of composite resins and resin cements - What do we need to know?

artículo científico publicado en 2017

Polymerization shrinkage stresses in a premolar restored with different composite resins and different incremental techniques.

artículo científico publicado en 2013

Practice-based analysis of direct posterior dental restorations performed in a public health service: Retrospective long-term survival in Brazil

artículo científico publicado en 2020

Radiopacity and Porosity of Bulk-fill and Conventional Composite Posterior Restorations-Digital X-ray Analysis.

artículo científico publicado en 2017

Replanted teeth stored in a newly developed powdered coconut water formula.

artículo científico publicado en 2018

Root dentin strain and temperature rise during endodontic treatment and post rehabilitation.

artículo científico publicado en 2013

Strain analysis of different diameter Morse taper implants under overloading compressive conditions

artículo científico publicado en 2015

Stress Distribution, Tooth Remaining Strain, and Fracture Resistance of Endodontically Treated Molars Restored Without or With One or Two Fiberglass Posts And Direct Composite Resin

artículo científico publicado en 2017

Surface treatment of glass fiber and carbon fiber posts: SEM characterization

artículo científico publicado en 2011

Surface/interface morphology and bond strength to glass ceramic etched for different periods.

artículo científico publicado en 2010

The Effects of Cavity Preparation and Composite Resin on Bond Strength and Stress Distribution Using the Microtensile Bond Test.

artículo científico publicado en 2017

The effect of dental treatment on oral health-related quality of life in adolescents.

artículo científico publicado en 2018

The effect of fiber post presence and restorative technique on the biomechanical behavior of endodontically treated maxillary incisors: an in vitro study

artículo científico publicado en 2012

The effect of post, core, crown type, and ferrule presence on the biomechanical behavior of endodontically treated bovine anterior teeth

scientific article published on 01 November 2010

The effect of prophylaxis method on microtensile bond strength of indirect restorations to dentin.

artículo científico publicado en 2012

The influence of the cavity preparation design on marginal accuracy of laboratory-processed resin composite restorations.

artículo científico publicado en 2007

Three-dimensional finite element stress analysis of teeth adjacent to a traumatized incisor

artículo científico publicado en 2018

Three-point bending testing of fibre posts: critical analysis by finite element analysis

artículo científico publicado en 2011

Ultimate tensile strength of tooth structures

artículo científico publicado en 2004

Use of scientific evidence by dentists in Brazil: Room for improving the evidence-based practice

artículo científico publicado en 2018

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda