Lista de obras - Mingshi Yang - Dominio Público Uruguay

A formulation approach for development of HPMC-based sustained release tablets for tolterodine tartrate with a low release variation

artículo científico publicado en 2012

A novel formulation design about water-insoluble oily drug: preparation of zedoary turmeric oil microspheres with self-emulsifying ability and evaluation in rabbits.

artículo científico publicado en 2004

A novel image analysis methodology for online monitoring of nucleation and crystal growth during solid state phase transformations

scientific article published on 04 May 2012

A novel pH-dependent gradient-release delivery system for nitrendipine II. Investigations of the factors affecting the release behaviors of the system.

artículo científico publicado en 2004

A novel pH-dependent gradient-release delivery system for nitrendipine: I. Manufacturing, evaluation in vitro and bioavailability in healthy dogs.

artículo científico publicado en 2004

Advances in combination therapy of lung cancer: Rationales, delivery technologies and dosage regimens

artículo científico publicado en 2017

Aerosol drug delivery to the lungs during nasal high flow therapy: an in vitro study

scientific article published on 15 February 2019

Anti-solvent Precipitation Method Coupled Electrospinning Process to Produce Poorly Water-Soluble Drug-Loaded Orodispersible Films

scientific article published on 05 August 2019

Apomorphine and its esters: Differences in Caco-2 cell permeability and chylomicron affinity

artículo científico publicado en 2016

Biomimetic synthesis and evaluation of histidine-derivative templated chiral mesoporous silica for improved oral delivery of the poorly water-soluble drug, nimodipine.

artículo científico publicado en 2018

Biomimetic synthesis of proline-derivative templated mesoporous silica for increasing the brain distribution of diazepam and improving the pharmacodynamics of nimesulide.

artículo científico publicado en 2017

Budesonide nanocrystal-loaded hyaluronic acid microparticles for inhalation: In vitro and in vivo evaluation.

artículo científico publicado en 2017

Characterisation of salmon calcitonin in spray-dried powder for inhalation. Effect of chitosan

artículo científico publicado en 2006

Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs

artículo científico

Ciprofloxacin-loaded sodium alginate/poly (lactic-co-glycolic acid) electrospun fibrous mats for wound healing

artículo científico publicado en 2017

Critical solvent properties affecting the particle formation process and characteristics of celecoxib-loaded plga microparticles via spray-drying.

artículo científico publicado en 2012

Crystal structure of aqua-(2-{[2-({2-[bis-(carboxyl-ato-κO-meth-yl)amino-κN]eth-yl}(carboxyl-ato-κO-meth-yl)amino-κN)eth-yl](carb-oxy-meth-yl)aza-niumyl}acetato)-gallium(III) trihydrate

scientific article published on 06 July 2018

Current advances and future trends in characterizing poorly water-soluble drugs using spectroscopic, imaging and data analytical techniques.

artículo científico publicado en 2014

Design and Fabrication of Dual Redox Responsive Nanoparticles with Diselenide Linkage Combined Photodynamically to Effectively Enhance Gene Expression

artículo científico publicado en 2020

Design and evaluation of inhalable chitosan-modified poly (DL-lactic-co-glycolic acid) nanocomposite particles

artículo científico publicado en 2012

Design and evaluation of poly(DL-lactic-co-glycolic acid) nanocomposite particles containing salmon calcitonin for inhalation.

artículo científico publicado en 2012

Design of Inhalable Solid Dosage Forms of Budesonide and Theophylline for Pulmonary Combination Therapy

scientific article published on 07 March 2019

Design of lipid matrix particles for fenofibrate: effect of polymorphism of glycerol monostearate on drug incorporation and release.

artículo científico publicado en 2013

Design of sustained-release nitrendipine microspheres having solid dispersion structure by quasi-emulsion solvent diffusion method.

artículo científico publicado en 2003

Design space approach in the optimization of the spray-drying process

artículo científico publicado en 2011

Design, in vitro release characterization and pharmacokinetics of novel controlled release pellets containing levodropropizine

artículo científico publicado en 2013

Designing CAF-adjuvanted dry powder vaccines: spray drying preserves the adjuvant activity of CAF01.

artículo científico publicado en 2013

Effect of age on the pharmacokinetics of polymorphic nimodipine in rats after oral administration

scientific article published on 06 August 2016

Effect of ethanol as a co-solvent on the aerosol performance and stability of spray-dried lysozyme.

artículo científico publicado en 2016

Effect of excipients on encapsulation and release of insulin from spray-dried solid lipid microparticles

artículo científico publicado en 2018

Effect of thermal and shear stresses in the spray drying process on the stability of siRNA dry powders

scientific article published on 08 May 2019

Effects of Surface Composition on the Aerosolisation and Dissolution of Inhaled Antibiotic Combination Powders Consisting of Colistin and Rifampicin

artículo científico publicado en 2015

Efficacy of oral lipid-based formulations of apomorphine and its diester in a Parkinson's disease rat model

artículo científico publicado en 2017

Electrospinnability of Poly Lactic-co-glycolic Acid (PLGA): the Role of Solvent Type and Solvent Composition.

artículo científico publicado en 2017

Encapsulation of azithromycin into polymeric microspheres by reduced pressure-solvent evaporation method

artículo científico publicado en 2012

Engineering of an inhalable DDA/TDB liposomal adjuvant: a quality-by-design approach towards optimization of the spray drying process

artículo científico publicado en 2013

Engineering of budesonide-loaded lipid-polymer hybrid nanoparticles using a quality-by-design approach.

artículo científico

Enhanced oral bioavailability of novel mucoadhesive pellets containing valsartan prepared by a dry powder-coating technique

artículo científico publicado en 2012

Formulating Inhalable Dry Powders Using Two-Fluid and Three-Fluid Nozzle Spray Drying

artículo científico publicado en 2018

Formulation strategies and particle engineering technologies for pulmonary delivery of biopharmaceuticals.

artículo científico

Functional nanoparticles exploit the bile acid pathway to overcome multiple barriers of the intestinal epithelium for oral insulin delivery

artículo científico publicado en 2017

In vivo evaluation of lipid-based formulations for oral delivery of apomorphine and its diester prodrugs

artículo científico publicado en 2016

In vivo evaluation of solid lipid microparticles and hybrid polymer-lipid microparticles for sustained delivery of leuprolide

scientific article published on 09 July 2019

In-Vitro Characterization and Oral Bioavailability of Organic Solvent-free Solid Dispersions Containing Telmisartan

artículo científico publicado en 2016

Influence of solvent evaporation rate and formulation factors on solid dispersion physical stability

scientific article published on 17 October 2011

Inhalable co-amorphous budesonide-arginine dry powders prepared by spray drying

scientific article published on 15 April 2019

Inhalable siRNA-loaded nano-embedded microparticles engineered using microfluidics and spray drying

artículo científico

Inhaled hyaluronic acid microparticles extended pulmonary retention and suppressed systemic exposure of a short-acting bronchodilator.

artículo científico publicado en 2017

Insight into Nanoscale Network of Spray-Dried Polymeric Particles: Role of Polymer Molecular Conformation

artículo científico publicado en 2018

Intestinal mucosa permeability following oral insulin delivery using core shell corona nanolipoparticles

artículo científico publicado en 2013

Investigating the correlation between in vivo absorption and in vitro release of fenofibrate from lipid matrix particles in biorelevant medium

artículo científico publicado en 2013

Investigation of factors affecting the stability of lysozyme spray dried from ethanol-water solutions.

artículo científico publicado en 2017

Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

scientific article published on 04 May 2017

Investigation of protein distribution in solid lipid particles and its impact on protein release using coherent anti-Stokes Raman scattering microscopy

artículo científico publicado en 2014

Lipid Shell-Enveloped Polymeric Nanoparticles with High Integrity of Lipid Shells Improve Mucus Penetration and Interaction with Cystic Fibrosis-Related Bacterial Biofilms.

artículo científico publicado en 2018

Lipophilic prodrugs of apomorphine I: Preparation, characterisation, and in vitro enzymatic hydrolysis in biorelevant media

Modulating protein release profiles by incorporating hyaluronic acid into PLGA microparticles Via a spray dryer equipped with a 3-fluid nozzle.

artículo científico publicado en 2014

Molecular structure and impact of amorphization strategies on intrinsic dissolution of spray dried indomethacin

scientific article published on 13 December 2018

Monoterpenes-containing PEGylated transfersomes for enhancing joint cavity drug delivery evidenced by CLSM and double-sited microdialysis

scientific article published on 14 April 2020

Multiscale Computational Models for Respiratory Aerosol Dynamics with Medical Applications

artículo científico publicado en 2019

Nanoembedded Microparticles for Stabilization and Delivery of Drug-Loaded Nanoparticles

artículo científico

One-step production of protein-loaded PLGA microparticles via spray drying using 3-fluid nozzle

artículo científico publicado en 2014

Overcoming Poor Tabletability of Bulky Absorption Enhancers by Spray Drying Technology

scientific article published on 02 February 2019

Particle formation and characteristics of Celecoxib-loaded poly(lactic-co-glycolic acid) microparticles prepared in different solvents using electrospraying

Particle size dependence of polymorphism in spray-dried mannitol.

artículo científico publicado en 2011

Pharmaceutical microparticle engineering with electrospraying: the role of mixed solvent systems in particle formation and characteristics.

artículo científico publicado en 2015

Poly(ethylene carbonate)-containing polylactic acid microparticles with rifampicin improve drug delivery to macrophages

scientific article published on 30 May 2018

Polymer-mediated anti-solvent crystallization of nitrendipine: monodispersed spherical crystals and growth mechanism.

artículo científico publicado en 2011

Preparation and characterization of poly(DL-lactide-co-glycolide) nanoparticles for siRNA delivery

artículo científico publicado en 2009

Pulmonary drug delivery to older people

artículo científico publicado en 2017

Qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant by using quartz crystal microbalance with dissipation monitoring

artículo científico publicado en 2019

Quality by design approach in the optimization of the spray-drying process.

artículo científico publicado en 2011

Raman mapping of mannitol/lysozyme particles produced via spray drying and single droplet drying.

artículo científico publicado en 2014

Solid Lipid Particles for Oral Delivery of Peptide and Protein Drugs II – The Digestion of Trilaurin Protects Desmopressin from Proteolytic Degradation

Solid lipid particles for oral delivery of peptide and protein drugs I--elucidating the release mechanism of lysozyme during lipolysis

artículo científico publicado en 2013

Solid lipid particles for oral delivery of peptide and protein drugs III - the effect of fed state conditions on the in vitro release and degradation of desmopressin

artículo científico publicado en 2014

Solvent-mediated amorphous-to-crystalline transformation of nitrendipine in amorphous particle suspensions containing polymers

artículo científico publicado en 2012

Stability of lysozyme incorporated into electrospun fibrous mats for wound healing

scientific article published on 07 January 2019

The effect of poly (lactic-co-glycolic) acid composition on the mechanical properties of electrospun fibrous mats.

artículo científico publicado en 2017

The impact of particle preparation methods and polymorphic stability of lipid excipients on protein distribution in microparticles

artículo científico publicado en 2017

The influence of lysozyme on mannitol polymorphism in freeze-dried and spray-dried formulations depends on the selection of the drying process

artículo científico publicado en 2013

The upregulated intestinal folate transporters direct the uptake of ligand-modified nanoparticles for enhanced oral insulin delivery

artículo científico publicado en 2021

Lista de obras de Mingshi Yang

A formulation approach for development of HPMC-based sustained release tablets for tolterodine tartrate with a low release variation

A novel formulation design about water-insoluble oily drug: preparation of zedoary turmeric oil microspheres with self-emulsifying ability and evaluation in rabbits.

A novel image analysis methodology for online monitoring of nucleation and crystal growth during solid state phase transformations

A novel pH-dependent gradient-release delivery system for nitrendipine II. Investigations of the factors affecting the release behaviors of the system.

A novel pH-dependent gradient-release delivery system for nitrendipine: I. Manufacturing, evaluation in vitro and bioavailability in healthy dogs.

Advances in combination therapy of lung cancer: Rationales, delivery technologies and dosage regimens

Aerosol drug delivery to the lungs during nasal high flow therapy: an in vitro study

Anti-solvent Precipitation Method Coupled Electrospinning Process to Produce Poorly Water-Soluble Drug-Loaded Orodispersible Films

Apomorphine and its esters: Differences in Caco-2 cell permeability and chylomicron affinity

Biomimetic synthesis and evaluation of histidine-derivative templated chiral mesoporous silica for improved oral delivery of the poorly water-soluble drug, nimodipine.

Biomimetic synthesis of proline-derivative templated mesoporous silica for increasing the brain distribution of diazepam and improving the pharmacodynamics of nimesulide.

Budesonide nanocrystal-loaded hyaluronic acid microparticles for inhalation: In vitro and in vivo evaluation.

Characterisation of salmon calcitonin in spray-dried powder for inhalation. Effect of chitosan

Characterization of particulate drug delivery systems for oral delivery of Peptide and protein drugs

Ciprofloxacin-loaded sodium alginate/poly (lactic-co-glycolic acid) electrospun fibrous mats for wound healing

Critical solvent properties affecting the particle formation process and characteristics of celecoxib-loaded plga microparticles via spray-drying.

Crystal structure of aqua-(2-{[2-({2-[bis-(carboxyl-ato-κO-meth-yl)amino-κN]eth-yl}(carboxyl-ato-κO-meth-yl)amino-κN)eth-yl](carb-oxy-meth-yl)aza-niumyl}acetato)-gallium(III) trihydrate

Current advances and future trends in characterizing poorly water-soluble drugs using spectroscopic, imaging and data analytical techniques.

Design and Fabrication of Dual Redox Responsive Nanoparticles with Diselenide Linkage Combined Photodynamically to Effectively Enhance Gene Expression

Design and evaluation of inhalable chitosan-modified poly (DL-lactic-co-glycolic acid) nanocomposite particles

Design and evaluation of poly(DL-lactic-co-glycolic acid) nanocomposite particles containing salmon calcitonin for inhalation.

Design of Inhalable Solid Dosage Forms of Budesonide and Theophylline for Pulmonary Combination Therapy

Design of lipid matrix particles for fenofibrate: effect of polymorphism of glycerol monostearate on drug incorporation and release.

Design of sustained-release nitrendipine microspheres having solid dispersion structure by quasi-emulsion solvent diffusion method.

Design space approach in the optimization of the spray-drying process

Design, in vitro release characterization and pharmacokinetics of novel controlled release pellets containing levodropropizine

Designing CAF-adjuvanted dry powder vaccines: spray drying preserves the adjuvant activity of CAF01.

Effect of age on the pharmacokinetics of polymorphic nimodipine in rats after oral administration

Effect of ethanol as a co-solvent on the aerosol performance and stability of spray-dried lysozyme.

Effect of excipients on encapsulation and release of insulin from spray-dried solid lipid microparticles

Effect of thermal and shear stresses in the spray drying process on the stability of siRNA dry powders

Effects of Surface Composition on the Aerosolisation and Dissolution of Inhaled Antibiotic Combination Powders Consisting of Colistin and Rifampicin

Efficacy of oral lipid-based formulations of apomorphine and its diester in a Parkinson's disease rat model

Electrospinnability of Poly Lactic-co-glycolic Acid (PLGA): the Role of Solvent Type and Solvent Composition.

Encapsulation of azithromycin into polymeric microspheres by reduced pressure-solvent evaporation method

Engineering of an inhalable DDA/TDB liposomal adjuvant: a quality-by-design approach towards optimization of the spray drying process

Engineering of budesonide-loaded lipid-polymer hybrid nanoparticles using a quality-by-design approach.

Enhanced oral bioavailability of novel mucoadhesive pellets containing valsartan prepared by a dry powder-coating technique

Formulating Inhalable Dry Powders Using Two-Fluid and Three-Fluid Nozzle Spray Drying

Formulation strategies and particle engineering technologies for pulmonary delivery of biopharmaceuticals.

Functional nanoparticles exploit the bile acid pathway to overcome multiple barriers of the intestinal epithelium for oral insulin delivery

In vivo evaluation of lipid-based formulations for oral delivery of apomorphine and its diester prodrugs

In vivo evaluation of solid lipid microparticles and hybrid polymer-lipid microparticles for sustained delivery of leuprolide

In-Vitro Characterization and Oral Bioavailability of Organic Solvent-free Solid Dispersions Containing Telmisartan

Influence of solvent evaporation rate and formulation factors on solid dispersion physical stability

Inhalable co-amorphous budesonide-arginine dry powders prepared by spray drying

Inhalable siRNA-loaded nano-embedded microparticles engineered using microfluidics and spray drying

Inhaled hyaluronic acid microparticles extended pulmonary retention and suppressed systemic exposure of a short-acting bronchodilator.

Insight into Nanoscale Network of Spray-Dried Polymeric Particles: Role of Polymer Molecular Conformation

Intestinal mucosa permeability following oral insulin delivery using core shell corona nanolipoparticles

Investigating the correlation between in vivo absorption and in vitro release of fenofibrate from lipid matrix particles in biorelevant medium

Investigation of factors affecting the stability of lysozyme spray dried from ethanol-water solutions.

Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

Investigation of protein distribution in solid lipid particles and its impact on protein release using coherent anti-Stokes Raman scattering microscopy

Lipid Shell-Enveloped Polymeric Nanoparticles with High Integrity of Lipid Shells Improve Mucus Penetration and Interaction with Cystic Fibrosis-Related Bacterial Biofilms.

Lipophilic prodrugs of apomorphine I: Preparation, characterisation, and in vitro enzymatic hydrolysis in biorelevant media

Modulating protein release profiles by incorporating hyaluronic acid into PLGA microparticles Via a spray dryer equipped with a 3-fluid nozzle.

Molecular structure and impact of amorphization strategies on intrinsic dissolution of spray dried indomethacin

Monoterpenes-containing PEGylated transfersomes for enhancing joint cavity drug delivery evidenced by CLSM and double-sited microdialysis

Multiscale Computational Models for Respiratory Aerosol Dynamics with Medical Applications

Nanoembedded Microparticles for Stabilization and Delivery of Drug-Loaded Nanoparticles

One-step production of protein-loaded PLGA microparticles via spray drying using 3-fluid nozzle

Overcoming Poor Tabletability of Bulky Absorption Enhancers by Spray Drying Technology

Particle formation and characteristics of Celecoxib-loaded poly(lactic-co-glycolic acid) microparticles prepared in different solvents using electrospraying

Particle size dependence of polymorphism in spray-dried mannitol.

Pharmaceutical microparticle engineering with electrospraying: the role of mixed solvent systems in particle formation and characteristics.

Poly(ethylene carbonate)-containing polylactic acid microparticles with rifampicin improve drug delivery to macrophages

Polymer-mediated anti-solvent crystallization of nitrendipine: monodispersed spherical crystals and growth mechanism.

Preparation and characterization of poly(DL-lactide-co-glycolide) nanoparticles for siRNA delivery

Pulmonary drug delivery to older people

Qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant by using quartz crystal microbalance with dissipation monitoring

Quality by design approach in the optimization of the spray-drying process.

Raman mapping of mannitol/lysozyme particles produced via spray drying and single droplet drying.

Solid Lipid Particles for Oral Delivery of Peptide and Protein Drugs II – The Digestion of Trilaurin Protects Desmopressin from Proteolytic Degradation

Solid lipid particles for oral delivery of peptide and protein drugs I--elucidating the release mechanism of lysozyme during lipolysis

Solid lipid particles for oral delivery of peptide and protein drugs III - the effect of fed state conditions on the in vitro release and degradation of desmopressin

Solvent-mediated amorphous-to-crystalline transformation of nitrendipine in amorphous particle suspensions containing polymers

Stability of lysozyme incorporated into electrospun fibrous mats for wound healing

The effect of poly (lactic-co-glycolic) acid composition on the mechanical properties of electrospun fibrous mats.