Lista de obras - Ralph Spolenak - Dominio Público Uruguay

3D electrohydrodynamic printing and characterisation of highly conductive gold nanowalls

artículo científico publicado en 2020

Achieving micron-scale plasticity and theoretical strength in Silicon

artículo científico publicado en 2020

Additive Manufacturing of Metal Structures at the Micrometer Scale

artículo científico publicado en 2017

Adhesion design maps for bio-inspired attachment systems

artículo científico publicado en 2005

Adhesion design maps for fibrillar adhesives: the effect of shape

artículo científico publicado en 2008

An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils

artículo científico publicado en 2018

Brittle-to-ductile transition in ultrathin Ta/Cu film systems

artículo científico publicado en 2009

Carrier lifetimes in uniaxially strained Ge micro bridges

Color evaluation of a dielectric mirror coating using porcine tissue and prosthetic gingival material: a comparison of two models

artículo científico publicado en 2015

Damage analysis in Al thin films fatigued at ultrahigh frequencies

artículo científico publicado en 2006

Dealloying of Au–Ag thin films with a composition gradient: Influence on morphology of nanoporous Au

artículo científico publicado en 2007

Dealloying of platinum-aluminum thin films: dynamics of pattern formation

scientific article published on 21 November 2011

Deformation behavior of gold nano-pillars prepared by nanoimprinting and focused ion-beam milling

artículo científico publicado en 2011

Deformation behavior of silver submicrometer-pillars prepared by nanoimprinting

Effects of alloying elements on electromigration

artículo científico publicado en 1998

Effects of contact shape on the scaling of biological attachments

artículo científico publicado en 2005

Electrical transport in pure and boron-doped carbon nanotubes

artículo científico publicado en 1999

Engineering the grain boundary network of thin films via ion-irradiation: Towards improved electromigration resistance

artículo científico publicado en 2017

Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements

artículo científico publicado en 2005

Fatigue damage in thin film Al interconnects at ultra high frequency: A finite element analysis approach

artículo científico publicado en 2007

Filament extrusion-based additive manufacturing of 316L stainless steel: Effects of sintering conditions on the microstructure and mechanical properties

Filament extrusion-based additive manufacturing of NiTi shape memory alloys

Fracture toughness of esthetic dental coating systems by nanoindentation and FIB sectional analysis

artículo científico publicado en 2015

From micro to nano contacts in biological attachment devices

artículo científico publicado en 2003

Fused filament fabrication of stainless steel structures - from binder development to sintered properties

Grain growth resistance and increased hardness of bulk nanocrystalline fcc cobalt prepared by a bottom-up approach

artículo científico publicado en 2007

Ice-Templated W-Cu Composites with High Anisotropy

artículo científico publicado en 2019

In vitro color evaluation of esthetic coatings for metallic dental implants and implant prosthetic appliances

artículo científico publicado en 2014

Influence of surface roughness on gecko adhesion

artículo científico publicado en 2007

Instability-induced pattern formation of photoactivated functional polymers.

artículo científico publicado en 2014

Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions

artículo científico publicado en 2017

Mechanical properties of a single gecko seta

artículo científico publicado en 2008

Metals by Micro-Scale Additive Manufacturing: Comparison of Microstructure and Mechanical Properties

artículo científico publicado en 2020

Multi-metal electrohydrodynamic redox 3D printing at the submicron scale

artículo científico publicado en 2019

Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability.

artículo científico publicado en 2017

Ordered arrays of faceted gold nanoparticles obtained by dewetting and nanosphere lithography

artículo científico publicado en 2008

Polymer nanocomposite patterning by dip-pen nanolithography

artículo científico publicado en 2016

Power-dependent Raman analysis of highly strained Si nanobridges.

artículo científico publicado en 2014

Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment

artículo científico publicado en 2015

Rapid qualitative phase analysis in highly textured thin films by x-ray diffraction

artículo científico publicado en 2008

Resolving the nanoscale adhesion of individual gecko spatulae by atomic force microscopy

artículo científico publicado en 2005

Response to comment on: Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques

artículo científico publicado en 2012

Scalable, ultra-resistant structural colors based on network metamaterials

scientific article published on 05 May 2017

Scanning X-ray microdiffraction with submicrometer white beam for strain/stress and orientation mapping in thin films

artículo científico publicado en 2003

Scanning X-ray strain microscopy of inhomogeneously strained Ge micro-bridges

artículo científico publicado en 2013

Seed-mediated synthesis of gold nanorods: control of the aspect ratio by variation of the reducing agent

artículo científico publicado en 2013

Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques

artículo científico publicado en 2008

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

article by Yu Zou et al published February 2014 in Acta Materialia

Strain‐Driven Thermal and Optical Instability in Silver/Amorphous‐Silicon Hyperbolic Metamaterials

artículo científico publicado en 2022

Stretchable heterogeneous composites with extreme mechanical gradients

artículo científico publicado en 2012

Strong single-crystalline Au films tested by a new synchrotron technique

artículo científico publicado en 2008

Superior room-temperature ductility of typically brittle quasicrystals at small sizes

artículo científico publicado en 2016

Temperature dependence of mechanical properties in ultrathin Au films with and without passivation

artículo científico publicado en 2008

Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition.

artículo científico publicado en 2016

Tensile strained Ge quantum wells on Si substrate: Post-growth annealing versus low temperature re-growth

Tensile testing of ultrathin polycrystalline films: A synchrotron-based technique

artículo científico publicado en 2004

The Hidden Pathways in Dense Energy Materials - Oxygen at Defects in Nanocrystalline Metals

artículo científico publicado en 2015

The influence of internal length scales on mechanical properties in natural nanocomposites: a comparative study on inner layers of seashells

artículo científico publicado en 2008

Thermal Management in Ni/Al Reactive Multilayers: Understanding and Preventing Reaction Quenching on Thin Film Heat Sinks

scientific article published on 04 November 2019

Top-down fabricated silicon nanowires under tensile elastic strain up to 4.5%

scientific article published in Nature Communications

Top-down method to introduce ultra-high elastic strain

Towards a Reproducible Synthesis of High Aspect Ratio Gold Nanorods

Ultra high-cycle fatigue in pure Al thin films and line structures

artículo científico publicado en 2006

Ultrastrong ductile and stable high-entropy alloys at small scales

artículo científico publicado en 2015

Usage of the isotope effect for the synthesis of ultrahigh aspect ratio gold nanorods

artículo científico publicado en 2012

X-ray microdiffraction: local stress distributions in polycrystalline and epitaxial thin films

artículo científico publicado en 2004

Lista de obras de Ralph Spolenak

3D electrohydrodynamic printing and characterisation of highly conductive gold nanowalls

Achieving micron-scale plasticity and theoretical strength in Silicon

Additive Manufacturing of Metal Structures at the Micrometer Scale

Adhesion design maps for bio-inspired attachment systems

Adhesion design maps for fibrillar adhesives: the effect of shape

An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils

Brittle-to-ductile transition in ultrathin Ta/Cu film systems

Carrier lifetimes in uniaxially strained Ge micro bridges

Color evaluation of a dielectric mirror coating using porcine tissue and prosthetic gingival material: a comparison of two models

Damage analysis in Al thin films fatigued at ultrahigh frequencies

Dealloying of Au–Ag thin films with a composition gradient: Influence on morphology of nanoporous Au

Dealloying of platinum-aluminum thin films: dynamics of pattern formation

Deformation behavior of gold nano-pillars prepared by nanoimprinting and focused ion-beam milling

Deformation behavior of silver submicrometer-pillars prepared by nanoimprinting

Effects of alloying elements on electromigration

Effects of contact shape on the scaling of biological attachments

Electrical transport in pure and boron-doped carbon nanotubes

Engineering the grain boundary network of thin films via ion-irradiation: Towards improved electromigration resistance

Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements

Fatigue damage in thin film Al interconnects at ultra high frequency: A finite element analysis approach

Filament extrusion-based additive manufacturing of 316L stainless steel: Effects of sintering conditions on the microstructure and mechanical properties

Filament extrusion-based additive manufacturing of NiTi shape memory alloys

Fracture toughness of esthetic dental coating systems by nanoindentation and FIB sectional analysis

From micro to nano contacts in biological attachment devices

Fused filament fabrication of stainless steel structures - from binder development to sintered properties

Grain growth resistance and increased hardness of bulk nanocrystalline fcc cobalt prepared by a bottom-up approach

Ice-Templated W-Cu Composites with High Anisotropy

In vitro color evaluation of esthetic coatings for metallic dental implants and implant prosthetic appliances

Influence of surface roughness on gecko adhesion

Instability-induced pattern formation of photoactivated functional polymers.

Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions

Mechanical properties of a single gecko seta

Metals by Micro-Scale Additive Manufacturing: Comparison of Microstructure and Mechanical Properties

Multi-metal electrohydrodynamic redox 3D printing at the submicron scale

Nanocrystalline High-Entropy Alloys: A New Paradigm in High-Temperature Strength and Stability.

Ordered arrays of faceted gold nanoparticles obtained by dewetting and nanosphere lithography

Polymer nanocomposite patterning by dip-pen nanolithography

Power-dependent Raman analysis of highly strained Si nanobridges.

Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment

Rapid qualitative phase analysis in highly textured thin films by x-ray diffraction

Resolving the nanoscale adhesion of individual gecko spatulae by atomic force microscopy

Response to comment on: Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques

Scalable, ultra-resistant structural colors based on network metamaterials

Scanning X-ray microdiffraction with submicrometer white beam for strain/stress and orientation mapping in thin films

Scanning X-ray strain microscopy of inhomogeneously strained Ge micro-bridges

Seed-mediated synthesis of gold nanorods: control of the aspect ratio by variation of the reducing agent

Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

Strain‐Driven Thermal and Optical Instability in Silver/Amorphous‐Silicon Hyperbolic Metamaterials

Stretchable heterogeneous composites with extreme mechanical gradients

Strong single-crystalline Au films tested by a new synchrotron technique

Superior room-temperature ductility of typically brittle quasicrystals at small sizes

Temperature dependence of mechanical properties in ultrathin Au films with and without passivation

Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition.

Tensile strained Ge quantum wells on Si substrate: Post-growth annealing versus low temperature re-growth

Tensile testing of ultrathin polycrystalline films: A synchrotron-based technique

The Hidden Pathways in Dense Energy Materials - Oxygen at Defects in Nanocrystalline Metals

The influence of internal length scales on mechanical properties in natural nanocomposites: a comparative study on inner layers of seashells

Thermal Management in Ni/Al Reactive Multilayers: Understanding and Preventing Reaction Quenching on Thin Film Heat Sinks

Top-down fabricated silicon nanowires under tensile elastic strain up to 4.5%

Top-down method to introduce ultra-high elastic strain

Towards a Reproducible Synthesis of High Aspect Ratio Gold Nanorods

Ultra high-cycle fatigue in pure Al thin films and line structures

Ultrastrong ductile and stable high-entropy alloys at small scales

Usage of the isotope effect for the synthesis of ultrahigh aspect ratio gold nanorods

X-ray microdiffraction: local stress distributions in polycrystalline and epitaxial thin films