Lista de obras - Philippe Zysset - Dominio Público Uruguay

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images

artículo científico publicado en 2011

A comparison of enhanced continuum FE with micro FE models of human vertebral bodies.

artículo científico publicado en 2009

A finite element analysis of two novel screw designs for scaphoid waist fractures

artículo científico publicado en 2015

A finite element model of the L5-S1 functional spinal unit: development and comparison with biomechanical tests in vitro.

artículo científico publicado en 2003

A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales.

artículo científico publicado en 2013

A global relationship between trabecular bone morphology and homogenized elastic properties.

artículo científico publicado en 1998

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

artículo científico publicado en 2010

A nonlocal constitutive model for trabecular bone softening in compression.

artículo científico publicado en 2010

A novel registration-based methodology for prediction of trabecular bone fabric from clinical QCT: A comprehensive analysis

artículo científico publicado en 2017

A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads.

artículo científico publicado en 2008

A quantitative collagen fibers orientation assessment using birefringence measurements: calibration and application to human osteons

artículo científico publicado en 2011

A rate-independent continuum model for bone tissue with interaction of compressive and tensile micro-damage

artículo científico publicado en 2017

A review of morphology-elasticity relationships in human trabecular bone: theories and experiments.

artículo científico publicado en 2003

A rigorous method for evaluation of the 6D compliance of external fixators

artículo científico publicado en 2006

Adjustable loop ACL suspension devices demonstrate less reliability in terms of reproducibility and irreversible displacement

artículo científico publicado en 2017

Age, gender, and bone lamellae elastic moduli.

artículo científico publicado en 2000

An anisotropic elastic-viscoplastic damage model for bone tissue.

artículo científico publicado en 2012

An application of nanoindentation technique to measure bone tissue Lamellae properties

artículo científico publicado en 2005

An experimentally validated finite element method for augmented vertebral bodies

scientific article published on 17 October 2012

An explicit micro-FE approach to investigate the post-yield behaviour of trabecular bone under large deformations

artículo científico publicado en 2019

An improved technique for inducing compression fractures of vertebral bodies in vitro

article published in 2009

An over-nonlocal implicit gradient-enhanced damage-plastic model for trabecular bone under large compressive strains.

artículo científico publicado en 2015

Assessing methods for characterising local and global structural and biomechanical properties of the trabecular bone network

artículo científico publicado en 2011

Assessment of a novel biomechanical fracture model for distal radius fractures

artículo científico publicado en 2012

Assessment of transverse isotropy in clinical-level CT images of trabecular bone using the gradient structure tensor.

artículo científico publicado en 2014

Assessment of volume fraction and fabric in the distal radius using HR-pQCT.

artículo científico publicado en 2009

Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration

scientific article published on 20 January 2016

Biomechanical effects of teriparatide in women with osteoporosis treated previously with alendronate and risedronate: results from quantitative computed tomography-based finite element analysis of the vertebral body

artículo científico publicado en 2009

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

scientific article published on 09 May 2011

Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables

artículo científico publicado en 2015

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability.

artículo científico publicado en 2013

Cathepsin S controls adipocytic and osteoblastic differentiation, bone turnover, and bone microarchitecture

artículo científico publicado en 2014

Cement distribution, volume, and compliance in vertebroplasty: some answers from an anatomy-based nonlinear finite element study.

artículo científico publicado en 2008

Characterizing microcrack orientation distribution functions in osteonal bone samples.

artículo científico publicado en 2016

Clinical Use of Quantitative Computed Tomography (QCT) of the Hip in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part I.

artículo científico publicado en 2015

Clinical Use of Quantitative Computed Tomography-Based Advanced Techniques in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part III.

artículo científico publicado en 2015

Clinical Use of Quantitative Computed Tomography-Based Finite Element Analysis of the Hip and Spine in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part II.

artículo científico publicado en 2015

Clinical versus pre-clinical FE models for vertebral body strength predictions.

artículo científico publicado en 2012

Comparison of mixed and kinematic uniform boundary conditions in homogenized elasticity of femoral trabecular bone using microfinite element analyses

artículo científico publicado en 2015

Comparison of proximal femur and vertebral body strength improvements in the FREEDOM trial using an alternative finite element methodology.

artículo científico publicado en 2015

Compliance of the L5-S1 spinal unit: a comparative study between an unconstrained and a partially constrained system.

artículo científico publicado en 2005

Compressive fatigue behavior of human vertebral trabecular bone

scientific article published on 26 July 2005

Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion.

artículo científico publicado en 2014

Computational and experimental methodology for site-matched investigations of the influence of mineral mass fraction and collagen orientation on the axial indentation modulus of lamellar bone

artículo científico publicado en 2013

Continuum damage interactions between tension and compression in osteonal bone

artículo científico publicado en 2015

DXA predictions of human femoral mechanical properties depend on the load configuration.

artículo científico publicado en 2013

Damage accumulation in vertebral trabecular bone depends on loading mode and direction

artículo científico publicado en 2011

Effect of boundary conditions on yield properties of human femoral trabecular bone.

artículo científico publicado en 2015

Elastic anisotropy of bone lamellae as a function of fibril orientation pattern

artículo científico publicado en 2010

Elastic anisotropy of human cortical bone secondary osteons measured by nanoindentation.

artículo científico publicado en 2009

Elastic anisotropy of uniaxial mineralized collagen fibers measured using two-directional indentation. Effects of hydration state and indentation depth.

artículo científico publicado en 2012

Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur

artículo científico publicado en 1999

Embedding of human vertebral bodies leads to higher ultimate load and altered damage localisation under axial compression.

artículo científico publicado en 2012

Estimation of the effective yield properties of human trabecular bone using nonlinear micro-finite element analyses.

artículo científico publicado en 2017

Estimation of tool pose based on force-density correlation during robotic drilling.

artículo científico publicado en 2012

European Society of Biomechanics S.M. Perren Award 2016: A statistical damage model for bone tissue based on distinct compressive and tensile cracks.

artículo científico publicado en 2016

Experimental determination of the emissivity of bone

artículo científico publicado en 2016

Experimental poromechanics of trabecular bone strength: role of Terzaghi's effective stress and of tissue level stress fluctuations

scientific article published on 29 September 2010

Experimental validation of a nonlinear μFE model based on cohesive-frictional plasticity for trabecular bone

artículo científico publicado en 2015

Experimental validation of finite element analysis of human vertebral collapse under large compressive strains

artículo científico publicado en 2014

Extra-articular step osteotomy of the olecranon: A biomechanical assessment.

artículo científico publicado en 2015

Fabric-based Tsai-Wu yield criteria for vertebral trabecular bone in stress and strain space

artículo científico publicado en 2012

Fabric-mechanical property relationships of trabecular bone allografts are altered by supercritical CO₂ treatment and gamma sterilization.

artículo científico publicado en 2011

Fast estimation of Colles' fracture load of the distal section of the radius by homogenized finite element analysis based on HR-pQCT.

artículo científico publicado en 2017

Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images

artículo científico publicado en 2016

Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength

artículo científico publicado en 2014

Finite element analysis for prediction of bone strength

artículo científico publicado en 2013

Finite element analysis predicts experimental failure patterns in vertebral bodies loaded via intervertebral discs up to large deformation

artículo científico publicado en 2015

Finite element based estimation of contact areas and pressures of the human scaphoid in various functional positions of the hand

artículo científico publicado en 2013

Finite element based nonlinear normalization of human lumbar intervertebral disc stiffness to account for its morphology

artículo científico publicado en 2014

Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component

scientific article published on 01 June 1993

From high-resolution CT data to finite element models: development of an integrated modular framework

artículo científico publicado en 2009

HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro ⬇️

artículo científico publicado el 6 de agosto de 2010

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

artículo científico publicado el 24 de mayo de 2011

Head-Neck Osteoplasty has Minor Effect on the Strength of an Ovine Cam-FAI Model: In Vitro and Finite Element Analyses.

artículo científico publicado en 2016

Heterogeneity of bone lamellar-level elastic moduli

artículo científico publicado en 2000

High resolution quantitative computed tomography-based assessment of trabecular microstructure and strength estimates by finite-element analysis of the spine, but not DXA, reflects vertebral fracture status in men with glucocorticoid-induced osteopo

artículo científico publicado en 2012

How is the indentation modulus of bone tissue related to its macroscopic elastic response? A validation study

artículo científico publicado en 2003

Human intervertebral disc stiffness correlates better with the Otsu threshold computed from axial T2 map of its posterior annulus fibrosus than with clinical classifications

artículo científico publicado en 2013

Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties

artículo científico publicado en 2003

Identification of elastic properties of human patellae using micro-finite element analysis.

artículo científico publicado en 2016

Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness.

artículo científico publicado en 2006

Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study

article

In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone

artículo científico publicado en 2014

Increased bone resorption and impaired bone microarchitecture in short-term and extended high-fat diet–induced obesity

artículo científico publicado en 2010

Indentation of bone tissue: a short review.

artículo científico publicado en 2009

Influence of Abutment Design on Stiffness, Strength, and Failure of Implant-Supported Monolithic Resin Nano Ceramic (RNC) Crowns

artículo científico publicado en 2014

Influence of boundary conditions on computed apparent elastic properties of cancellous bone.

artículo científico publicado en 2007

Intrinsic bone tissue properties in adult rat vertebrae: modulation by dietary protein

artículo científico publicado en 2004

Lathyrism-induced alterations in collagen cross-links influence the mechanical properties of bone material without affecting the mineral

artículo científico publicado en 2011

Loss of bone strength in HLA-B27 transgenic rats is characterized by a high bone turnover and is mainly osteoclast-driven.

artículo científico publicado en 2015

Mapping anisotropy improves QCT-based finite element estimation of hip strength in pooled stance and side-fall load configurations

artículo científico publicado en 2018

Measurement of structural anisotropy in femoral trabecular bone using clinical-resolution CT images.

artículo científico publicado en 2013

Mechanical characterization of brushite and hydroxyapatite cements

scientific article published on 01 November 2001

Mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly

artículo científico publicado en 2015

Mechanical restoration and failure analyses of a hydrogel and scaffold composite strategy for annulus fibrosus repair

artículo científico publicado en 2015

Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains

artículo científico publicado en 2012

Morphology-mechanical property relations in trabecular bone of the osteoarthritic proximal tibia

scientific article published on 01 April 1994

Multidirectional volar fixed-angle plating using cancellous locking screws for distal radius fractures--evaluation of three screw configurations in an extra-articular fracture model.

artículo científico publicado en 2011

Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions

scientific article published on 01 January 2002

Nanoscale deformation mechanisms and yield properties of hydrated bone extracellular matrix

artículo científico publicado en 2017

New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.

artículo científico publicado en 2017

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.

artículo científico publicado en 2015

Not only stiffness, but also yield strength of the trabecular structure determined by non-linear µFE is best predicted by bone volume fraction and fabric tensor

artículo científico publicado en 2016

OPG-Fc treatment in growing pigs leads to rapid reductions in bone resorption markers, serum calcium, and bone formation markers

artículo científico publicado en 2011

Osseointegration of ultrafine-grained titanium with a hydrophilic nano-patterned surface: an in vivo examination in miniature pigs

artículo científico publicado en 2018

Osteoblast- and T cell-mediated RANKL expression does not contribute to age-related osteoclastogenesis in a murine model

Principal stiffness orientation and degree of anisotropy of human osteons based on nanoindentation in three distinct planes.

artículo científico publicado en 2011

QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA

article

Quantitative analysis of imprint shape and its relation to mechanical properties measured by microindentation in bone

artículo científico publicado en 2014

Real-Time Prediction of Temperature Elevation During Robotic Bone Drilling Using the Torque Signal.

artículo científico

Rebound-associated vertebral fractures after discontinuation of denosumab-from clinic and biomechanics.

artículo científico publicado en 2015

Reducing temperature elevation of robotic bone drilling

artículo científico publicado en 2016

Relationship between ultrasonic parameters and apparent trabecular bone elastic modulus: a numerical approach.

artículo científico publicado en 2009

Removal of the cortical endplates has little effect on ultimate load and damage distribution in QCT-based voxel models of human lumbar vertebrae under axial compression.

artículo científico publicado en 2012

Response to the commentary on mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly.

artículo científico publicado en 2016

Sampling Sphere Orientation Distribution: an efficient method to quantify trabecular bone fabric on grayscale images.

artículo científico publicado en 2009

Scaling relations between trabecular bone volume fraction and microstructure at different skeletal sites

artículo científico publicado en 2013

Statistical analysis of the inter-individual variations of the bone shape, volume fraction and fabric and their correlations in the proximal femur.

artículo científico publicado en 2017

Stiffness, strength, and failure modes of implant-supported monolithic lithium disilicate crowns: influence of titanium and zirconia abutments.

artículo científico publicado en 2015

Structure-mechanics relationships in mineralized tendons.

artículo científico

Temperature Prediction Model for Bone Drilling Based on Density Distribution and In Vivo Experiments for Minimally Invasive Robotic Cochlear Implantation.

artículo científico publicado en 2015

Tensile and compressive behaviour of the bovine periodontal ligament

scientific article published on 01 January 2004

The Initial Slope of the Variogram, Foundation of the Trabecular Bone Score, Is Not or Is Poorly Associated With Vertebral Strength

artículo científico publicado en 2015

The effect of standard and low-modulus cement augmentation on the stiffness, strength, and endplate pressure distribution in vertebroplasty.

artículo científico publicado en 2011

The effective elastic properties of human trabecular bone may be approximated using micro-finite element analyses of embedded volume elements

artículo científico publicado en 2016

The effects of bone and pore volume fraction on the mechanical properties of PMMA/bone biopsies extracted from augmented vertebrae

artículo científico publicado en 2011

The influence of yield surface shape and damage in the depth-dependent response of bone tissue to nanoindentation using spherical and Berkovich indenters

artículo científico publicado en 2013

The mechanical behavior of PMMA/bone specimens extracted from augmented vertebrae: a numerical study of interface properties, PMMA shrinkage and trabecular bone damage

artículo científico publicado en 2012

The role of cortical shell and trabecular fabric in finite element analysis of the human vertebral body.

artículo científico publicado en 2009

The role of fabric in the large strain compressive behavior of human trabecular bone

artículo científico publicado en 2010

The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations

scientific article published on 19 January 2007

The skeleton of multiparous sows is protected from effects of ovariectomy and calcium deprivation

Tissue properties of the human vertebral body sub-structures evaluated by means of microindentation.

artículo científico publicado en 2013

Ultimate force and stiffness of 2-piece zirconium dioxide implants with screw-retained monolithic lithium-disilicate reconstructions.

artículo científico publicado en 2017

Valid micro finite element models of vertebral trabecular bone can be obtained using tissue properties measured with nanoindentation under wet conditions

artículo científico publicado en 2010

Validation of a voxel-based FE method for prediction of the uniaxial apparent modulus of human trabecular bone using macroscopic mechanical tests and nanoindentation

artículo científico publicado en 2007

Validation of an HR-pQCT-based homogenized finite element approach using mechanical testing of ultra-distal radius sections.

artículo científico publicado en 2010

Validation of an anatomy specific finite element model of Colles’ fracture

article

Vertebral strength prediction with an increased QCT resolution: Densitometry versus FEA

Volar fixed-angle plating of extra-articular distal radius fractures--a biomechanical analysis comparing threaded screws and smooth pegs

scientific article published on 01 November 2010

Where does hip fracture initiate?

artículo científico publicado en 2014

Where is the distal fracture line location of dorsally displaced distal radius fractures?

scientific article published on 26 October 2010

μCT-based trabecular anisotropy can be reproducibly computed from HR-pQCT scans using the triangulated bone surface.

artículo científico publicado en 2017

Lista de obras de Philippe Zysset

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images

A comparison of enhanced continuum FE with micro FE models of human vertebral bodies.

A finite element analysis of two novel screw designs for scaphoid waist fractures

A finite element model of the L5-S1 functional spinal unit: development and comparison with biomechanical tests in vitro.

A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales.

A global relationship between trabecular bone morphology and homogenized elastic properties.

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

A nonlocal constitutive model for trabecular bone softening in compression.

A novel registration-based methodology for prediction of trabecular bone fabric from clinical QCT: A comprehensive analysis

A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads.

A quantitative collagen fibers orientation assessment using birefringence measurements: calibration and application to human osteons

A rate-independent continuum model for bone tissue with interaction of compressive and tensile micro-damage

A review of morphology-elasticity relationships in human trabecular bone: theories and experiments.

A rigorous method for evaluation of the 6D compliance of external fixators

Adjustable loop ACL suspension devices demonstrate less reliability in terms of reproducibility and irreversible displacement

Age, gender, and bone lamellae elastic moduli.

An anisotropic elastic-viscoplastic damage model for bone tissue.

An application of nanoindentation technique to measure bone tissue Lamellae properties

An experimentally validated finite element method for augmented vertebral bodies

An explicit micro-FE approach to investigate the post-yield behaviour of trabecular bone under large deformations

An improved technique for inducing compression fractures of vertebral bodies in vitro

An over-nonlocal implicit gradient-enhanced damage-plastic model for trabecular bone under large compressive strains.

Assessing methods for characterising local and global structural and biomechanical properties of the trabecular bone network

Assessment of a novel biomechanical fracture model for distal radius fractures

Assessment of transverse isotropy in clinical-level CT images of trabecular bone using the gradient structure tensor.

Assessment of volume fraction and fabric in the distal radius using HR-pQCT.

Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration

Biomechanical effects of teriparatide in women with osteoporosis treated previously with alendronate and risedronate: results from quantitative computed tomography-based finite element analysis of the vertebral body

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability.

Cathepsin S controls adipocytic and osteoblastic differentiation, bone turnover, and bone microarchitecture

Cement distribution, volume, and compliance in vertebroplasty: some answers from an anatomy-based nonlinear finite element study.

Characterizing microcrack orientation distribution functions in osteonal bone samples.

Clinical Use of Quantitative Computed Tomography (QCT) of the Hip in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part I.

Clinical Use of Quantitative Computed Tomography-Based Advanced Techniques in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part III.

Clinical Use of Quantitative Computed Tomography-Based Finite Element Analysis of the Hip and Spine in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part II.

Clinical versus pre-clinical FE models for vertebral body strength predictions.

Comparison of mixed and kinematic uniform boundary conditions in homogenized elasticity of femoral trabecular bone using microfinite element analyses

Comparison of proximal femur and vertebral body strength improvements in the FREEDOM trial using an alternative finite element methodology.

Compliance of the L5-S1 spinal unit: a comparative study between an unconstrained and a partially constrained system.

Compressive fatigue behavior of human vertebral trabecular bone

Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion.

Computational and experimental methodology for site-matched investigations of the influence of mineral mass fraction and collagen orientation on the axial indentation modulus of lamellar bone

Continuum damage interactions between tension and compression in osteonal bone

DXA predictions of human femoral mechanical properties depend on the load configuration.

Damage accumulation in vertebral trabecular bone depends on loading mode and direction

Effect of boundary conditions on yield properties of human femoral trabecular bone.

Elastic anisotropy of bone lamellae as a function of fibril orientation pattern

Elastic anisotropy of human cortical bone secondary osteons measured by nanoindentation.

Elastic anisotropy of uniaxial mineralized collagen fibers measured using two-directional indentation. Effects of hydration state and indentation depth.

Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur

Embedding of human vertebral bodies leads to higher ultimate load and altered damage localisation under axial compression.

Estimation of the effective yield properties of human trabecular bone using nonlinear micro-finite element analyses.

Estimation of tool pose based on force-density correlation during robotic drilling.

European Society of Biomechanics S.M. Perren Award 2016: A statistical damage model for bone tissue based on distinct compressive and tensile cracks.

Experimental determination of the emissivity of bone

Experimental poromechanics of trabecular bone strength: role of Terzaghi's effective stress and of tissue level stress fluctuations

Experimental validation of a nonlinear μFE model based on cohesive-frictional plasticity for trabecular bone

Experimental validation of finite element analysis of human vertebral collapse under large compressive strains

Extra-articular step osteotomy of the olecranon: A biomechanical assessment.

Fabric-based Tsai-Wu yield criteria for vertebral trabecular bone in stress and strain space

Fabric-mechanical property relationships of trabecular bone allografts are altered by supercritical CO₂ treatment and gamma sterilization.

Fast estimation of Colles' fracture load of the distal section of the radius by homogenized finite element analysis based on HR-pQCT.

Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images

Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength

Finite element analysis for prediction of bone strength

Finite element analysis predicts experimental failure patterns in vertebral bodies loaded via intervertebral discs up to large deformation

Finite element based estimation of contact areas and pressures of the human scaphoid in various functional positions of the hand

Finite element based nonlinear normalization of human lumbar intervertebral disc stiffness to account for its morphology

Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component

From high-resolution CT data to finite element models: development of an integrated modular framework

HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro ⬇️

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

Head-Neck Osteoplasty has Minor Effect on the Strength of an Ovine Cam-FAI Model: In Vitro and Finite Element Analyses.

Heterogeneity of bone lamellar-level elastic moduli

High resolution quantitative computed tomography-based assessment of trabecular microstructure and strength estimates by finite-element analysis of the spine, but not DXA, reflects vertebral fracture status in men with glucocorticoid-induced osteopo

How is the indentation modulus of bone tissue related to its macroscopic elastic response? A validation study

Human intervertebral disc stiffness correlates better with the Otsu threshold computed from axial T2 map of its posterior annulus fibrosus than with clinical classifications