Filtros de búsqueda

Lista de obras de Luiz Felipe Valandro

A Multicenter Randomized Double-blind Controlled Clinical Trial of Fiber Post Cementation Strategies

artículo científico publicado en 2018

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

artículo científico publicado en 2015

A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule

artículo científico publicado en 2019

Accelerated loading frequency does not influence the fatigue behavior of polymer infiltrated ceramic network or lithium disilicate glass-ceramic restorations

scientific article published on 03 June 2020

Adherence of Streptococcus mutans to uncoated and saliva-coated glass-ceramics and composites.

artículo científico publicado en 2008

Adhesion between fiber post and root dentin: evaluation of post surface conditioning for bond strength improvement

artículo científico publicado en 2011

Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP.

artículo científico publicado en 2014

Adhesion to a Lithium Disilicate Glass Ceramic Etched with Hydrofluoric Acid at Distinct Concentrations

scientific article published on 01 September 2018

Adhesive Cementation Promotes Higher Fatigue Resistance to Zirconia Crowns

artículo científico publicado en 2016

Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic

scientific article published on 22 May 2019

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

artículo científico publicado en 2013

Are posts necessary for the restoration of root filled teeth with limited tissue loss? A structured review of laboratory and clinical studies

artículo científico

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

artículo científico publicado en 2016

Biochemical parameters and anthropometry predict NAFLD in obese children.

artículo científico publicado en 2011

Bond strength and stability of 3 luting systems on a zirconia-dentin complex.

artículo científico publicado en 2013

Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments

artículo científico publicado en 2018

Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

artículo científico publicado en 2009

Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning

scientific article published on 01 June 2006

Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling.

artículo científico publicado en 2007

Bond strength of two resin cements on dentin using different cementation strategies.

artículo científico publicado en 2010

Bond strength of two resin cements to titanium after different surface conditioning methods

artículo científico publicado en 2012

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

artículo científico publicado en 2013

Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics

scientific article published on 01 March 2005

CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics

scientific article published on 09 March 2019

CAD/CAM machining Vs pre-sintering in-lab fabrication techniques of Y-TZP ceramic specimens: Effects on their mechanical fatigue behavior

artículo científico publicado en 2017

Canal preparation and filling techniques do not influence the fracture resistance of extensively damaged teeth.

artículo científico publicado en 2014

Causes of resistant hypertension detected by a standardized algorithm

artículo científico publicado en 2012

Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer

scientific article published on 01 November 2010

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength

scientific article published on 01 July 2016

Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics.

artículo científico publicado en 2018

Ceramic firing protocols and thermocycling: effects on the load-bearing capacity under fatigue of a bonded zirconia lithium silicate glass-ceramic

scientific article published on 15 July 2020

Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength.

artículo científico publicado en 2012

Clinical outcomes and success rates of quartz fiber post restorations: A retrospective study.

artículo científico publicado en 2015

Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review.

artículo científico publicado en 2017

Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics

artículo científico publicado en 2016

Comparison of endocrowns made of lithium disilicate glass-ceramic or polymer-infiltrated ceramic networks and direct composite resin restorations: fatigue performance and stress distribution

artículo científico publicado en 2019

Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only

artículo científico publicado en 2007

Comparison of resin push-out strength to root dentin of bovine- and human-teeth.

artículo científico publicado en 2009

Comparison of two bond strength testing methodologies for bilayered all-ceramics.

artículo científico publicado en 2006

Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods

artículo científico publicado en 2012

Confocal laser microscopic analysis of biofilm on newer feldspar ceramic.

artículo científico publicado en 2011

Different Methods for Inlay Production: Effect on Internal and Marginal Adaptation, Adjustment Time, and Contact Point

artículo científico publicado en 2017

Does Finishing and Polishing of Restorative Materials Affect Bacterial Adhesion and Biofilm Formation? A Systematic Review.

artículo científico publicado en 2018

Does Luting Strategy Affect the Fatigue Behavior of Bonded Y-TZP Ceramic?

artículo científico publicado en 2018

Does adhesive resin application contribute to resin bond durability on etched and silanized feldspathic ceramic?

artículo científico publicado en 2008

Does the bonded cross-sectional surface area affect the microtensile bond strength of resin cement to glass-ceramic?

scientific article published on 01 October 2008

Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin?

artículo científico publicado en 2006

Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging.

artículo científico publicado en 2013

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

artículo científico publicado en 2011

Durability of the bond strength of self-adhesive resin cements to human dentin

scientific article published on 01 July 2009

Early biofilm colonization on polished- and glazed-zirconium ceramic surface. Preliminary results.

artículo científico publicado en 2006

Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.

artículo científico publicado en 2011

Effect of Different Surface Treatments of Resin Relined Fiber Posts Cemented With Self-adhesive Resin Cement on Push-out and Microtensile Bond Strength Tests

scientific article published on 27 March 2020

Effect of Ferrule Thickness on Fracture Resistance of Teeth Restored With a Glass Fiber Post or Cast Post

scientific article published on 08 July 2019

Effect of Hydrofluoric Acid Concentration on Resin Adhesion to a Feldspathic Ceramic.

artículo científico publicado en 2015

Effect of Intracanal Irrigants on Bond Strength of Fiber Posts Cemented With a Self-adhesive Resin Cement.

artículo científico publicado en 2016

Effect of Post-Space Irrigation with NaOCl And CaOCl at Different Concentrations on the Bond Strength of Posts Cemented with a Self-Adhesive Resin Cement

artículo científico publicado en 2018

Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia

artículo científico publicado en 2018

Effect of acid neutralization and mechanical cycling on the microtensile bond strength of glass-ceramic inlays

artículo científico publicado en 2009

Effect of adhesive system type and tooth region on the bond strength to dentin.

artículo científico publicado en 2008

Effect of brushing with conventional versus whitening dentifrices on surface roughness and biofilm formation of dental ceramics

artículo científico publicado en 2012

Effect of ceramic etching protocols on resin bond strength to a feldspar ceramic

artículo científico publicado en 2014

Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic.

artículo científico publicado en 2004

Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia

artículo científico publicado en 2017

Effect of cleansing methods on saliva-contaminated zirconia--an evaluation of resin bond durability

artículo científico publicado en 2014

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

artículo científico publicado en 2015

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

scientific article published on 01 April 2008

Effect of coronal macroretentions and diameter of a glass-FRC on fracture resistance of bovine teeth restored with fiber posts

artículo científico publicado en 2009

Effect of cyclic loading on fracture strength and microleakage of a quartz fiber dowel with different adhesive, cement and resin core material combinations

article

Effect of etching with distinct hydrofluoric acid concentrations on the flexural strength of a lithium disilicate-based glass ceramic.

artículo científico publicado en 2016

Effect of fiber posts with different emerging diameters on the fracture strength of restored crownless teeth

scientific article published on 01 March 2011

Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic

artículo científico publicado en 2018

Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic

artículo científico publicado en 2015

Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic

artículo científico publicado en 2014

Effect of low-temperature aging on the mechanical behavior of ground Y-TZP.

artículo científico publicado en 2014

Effect of mechanical cycling on the push-out bond strength of fiber posts adhesively bonded to human root dentin.

artículo científico publicado en 2007

Effect of post length on the fatigue resistance of bovine teeth restored with bonded fiber posts: a pilot study.

artículo científico publicado en 2006

Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement

artículo científico publicado en 2013

Effect of resin cement space on the fatigue behavior of bonded CAD/CAM leucite ceramic crowns

scientific article published on 01 June 2020

Effect of root canal preparation, type of endodontic post and mechanical cycling on root fracture strength

artículo científico publicado en 2014

Effect of root canal treatments on quartz fiber posts bonding to root dentin

artículo científico publicado en 2006

Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

artículo científico publicado en 2012

Effect of silane coupling agents and alloy primers on adhesion to titanium

artículo científico publicado el 1 de septiembre de 2011

Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.

artículo científico publicado en 2010

Effect of surface treatment of brackets and mechanical cycling on adhesion to enamel

Effect of surface treatments on the resin bond to zirconium-based ceramic.

artículo científico publicado en 2005

Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

artículo científico publicado en 2008

Effect of the layering technique on bond strength and cohesive resistance of a porcelain-zirconia system

scientific article published on 01 February 2014

Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement

artículo científico publicado en 2003

Effect of two resin cements and two fiber post surface treatments on push-out bond strength between fiber post and root dentin.

artículo científico publicado en 2015

Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.

artículo científico publicado en 2008

Effect of zirconia polycrystal and stainless steel on the wear of resin composites, dentin and enamel

scientific article published on 21 December 2018

Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations

scientific article published on 26 April 2019

Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic.

artículo científico publicado en 2015

Effects of mechanical cycling on the bonding of zirconia and fiber posts to human root dentin.

artículo científico publicado en 2007

Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses

artículo científico publicado en 2017

Elastic Properties of Lithium Disilicate Versus Feldspathic Inlays: Effect on the Bonding by 3D Finite Element Analysis

artículo científico publicado en 2016

Endodontic Irrigation Protocols: Effects on Bonding of Adhesive Systems to Coronal Enamel and Dentin.

artículo científico publicado en 2017

Endodontic Sealers Affect the Bond Strength of Fiber Posts and the Degree of Conversion of Two Resin Cements

artículo científico publicado en 2018

Environmental and biological monitoring of occupational formaldehyde exposure resulting from the use of products for hair straightening

artículo científico publicado en 2015

Evaluation of four cementation strategies on the push-out bond strength between fiber post and root dentin

artículo científico publicado en 2011

Evaluation of genotoxicity in workers exposed to low levels of formaldehyde in a furniture manufacturing facility.

artículo científico publicado en 2015

Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements

artículo científico publicado en 2018

Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings.

artículo científico publicado en 2013

Evaluation of tensile retention of Y-TZP crowns after long-term aging: effect of the core substrate and crown surface conditioning

artículo científico publicado en 2014

Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: effect of the cement and Y-TZP surface conditioning.

artículo científico

Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts

artículo científico publicado en 2005

Fatigue Failure Load of Lithium Disilicate Restorations Cemented on a Chairside Titanium-Base

scientific article published on 25 May 2018

Fatigue Failure Load of Resin-bonded Simplified Lithium Disilicate Glass-Ceramic Restorations: Effect of Ceramic Conditioning Methods

scientific article published on 01 January 2019

Fatigue Failure Load of Restored Premolars: Effect of Etching the Intaglio Surface of Ceramic Inlays With Hydrofluoric Acid at Different Concentrations

article

Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling

artículo científico publicado en 2019

Fatigue Resistance of Y-TZP/Porcelain Crowns is Not Influenced by the Conditioning of the Intaglio Surface.

artículo científico publicado en 2015

Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing

scientific article published on 06 October 2020

Fatigue behavior of Y-TZP ceramic after surface treatments

article

Fatigue failure load and finite element analysis of multilayer ceramic restorations

scientific article published on 15 November 2018

Fatigue failure load of an adhesively-cemented lithium disilicate glass-ceramic: Conventional ceramic etching vs etch & prime one-step primer

article

Fatigue failure load of feldspathic ceramic crowns after hydrofluoric acid etching at different concentrations.

artículo científico publicado en 2017

Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness

article

Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration.

artículo científico publicado en 2017

Fatigue limit of monolithic Y-TZP three-unit-fixed dental prostheses: Effect of grinding at the gingival zone of the connector

artículo científico publicado en 2017

Fatigue limit of polycrystalline zirconium oxide ceramics: Effect of grinding and low-temperature aging

article

Fatigue performance of adhesively cemented glass-, hybrid- and resin-ceramic materials for CAD/CAM monolithic restorations

scientific article published on 25 January 2019

Fatigue performance of fully-stabilized zirconia polycrystals monolithic restorations: The effects of surface treatments at the bonding surface

scientific article published on 10 July 2020

Fatigue resistance of bovine teeth restored with resin-bonded fiber posts: effect of post surface conditioning.

artículo científico publicado en 2008

Fatigue resistance of teeth restored with fiber posts and different post cementation strengths

artículo científico publicado en 2009

Fatigue resistance of the bond of a glass-infiltrated alumina ceramic to human dentin

article

Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations

article

Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment.

artículo científico publicado en 2017

Fatigue surviving, fracture resistance, shear stress and finite element analysis of glass fiber posts with different diameters.

artículo científico publicado en 2014

Fiber post cementation strategies: effect of mechanical cycling on push-out bond strength and cement polymerization stress

artículo científico publicado en 2012

Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments.

artículo científico publicado en 2015

Flexural strength of glass-infiltrated zirconia/alumina-based ceramics and feldspathic veneering porcelains

artículo científico publicado en 2009

Fractographical Analysis and Biomechanical Considerations of a Tooth Restored With Intracanal Fiber Post: Report of the Fracture and Importance of the Fiber Arrangements.

artículo científico publicado en 2016

Fracture resistance of weakened roots restored with different intracanal retainers

artículo científico publicado en 2015

Fracture strength of endodontically treated teeth restored with different strategies after mechanical cycling

artículo científico publicado en 2012

Fracture strength of endodontically-treated teeth restored with post and cores and composite cores only

artículo científico publicado en 2009

Grinding With Diamond Burs and Hydrothermal Aging of a Y-TZP Material: Effect on the Material Surface Characteristics and Bacterial Adhesion.

artículo científico publicado en 2017

Grinding the intaglio surface of yttria partially- and fully-stabilized zirconia polycrystals restorations: Effect on their fatigue behavior

artículo científico publicado en 2020

Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations

scientific article published on 11 November 2019

Hard machining, glaze firing and hydrofluoric acid etching: Do these procedures affect the flexural strength of a leucite glass-ceramic?

artículo científico publicado en 2015

High load frequency at 20Hz: Its effects on the fatigue behavior of a leucite-reinforced glass-ceramic

scientific article published on 03 April 2020

How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations?

artículo científico publicado en 2018

Hydrofluoric acid concentrations: Effect on the cyclic load-to-failure of machined lithium disilicate restorations

artículo científico publicado en 2018

Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramics.

artículo científico publicado en 2017

Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia

artículo científico publicado en 2012

Improved adhesion of Y-TZP ceramics: a novel approach for surface modification

artículo científico publicado en 2014

In vitro wear of a zirconium-reinforced lithium silicate ceramic against different restorative materials

artículo científico publicado en 2019

Influence of Endodontic Treatment and Retreatment on the Fatigue Failure Load, Numbers of Cycles for Failure, and Survival Rates of Human Canine Teeth

artículo científico publicado en 2017

Influence of Surface Conditioning Protocols on Glass-Fiber Post Adhesion Performance After Aging and Flexural Strength

Influence of cement thickness and mechanical cycling on the push-out bond strength between posts and root dentin

artículo científico publicado en 2011

Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic

artículo científico publicado en 2006

Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding

scientific article published on 13 February 2019

Influence of insertion techniques for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.

artículo científico publicado en 2015

Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts

artículo científico publicado en 2014

Influence of remaining coronal thickness and height on biomechanical behavior of endodontically treated teeth: survival rates, load to fracture and finite element analysis.

artículo científico publicado en 2018

Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations

artículo científico publicado en 2019

Influence of zirconia surface treatments of a bilayer restorative assembly on the fatigue performance

scientific article published on 06 October 2020

Inlays made from a hybrid material: adaptation and bond strengths.

artículo científico publicado en 2014

Internal adjustments decrease the fatigue failure load of bonded simplified lithium disilicate restorations

article

Isomorphism of quasispecies and percolation models

artículo científico publicado en 2000

Lithium disilicate glass-ceramic vs translucent zirconia polycrystals bonded to distinct substrates: Fatigue failure load, number of cycles for failure, survival rates, and stress distribution

artículo científico publicado en 2018

Load-bearing capacity under fatigue and survival rates of adhesively cemented yttrium-stabilized zirconia polycrystal monolithic simplified restorations

artículo científico publicado en 2018

Loading frequencies up to 20Hz as an alternative to accelerate fatigue strength tests in a Y-TZP ceramic.

artículo científico publicado en 2016

Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

artículo científico publicado en 2017

Low-Fusing Porcelain Glaze Application on 3Y-TZP Surfaces can Enhance Zirconia-Porcelain Adhesion

artículo científico publicado en 2016

Low-fusing porcelain glaze application does not damage the fatigue strength of Y-TZP

artículo científico publicado en 2019

Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis.

artículo científico

Low-temperature degradation of a Y-TZP ceramic after surface treatments

artículo científico publicado en 2013

Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements

artículo científico publicado en 2014

Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging.

artículo científico publicado en 2016

Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens.

artículo científico publicado en 2017

Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments

artículo científico publicado en 2017

Mechanical fatigue cycling on teeth restored with fiber posts: impact of coronal grooves and diameter of glass fiber post on fracture resistance.

artículo científico publicado en 2011

Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength

artículo científico publicado en 2018

Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations

artículo científico publicado en 2018

Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics.

artículo científico publicado en 2008

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment.

artículo científico publicado en 2011

Microstructure, topography, surface roughness, fractal dimension, internal and marginal adaptation of pressed and milled lithium-disilicate monolithic restorations

scientific article published on 15 June 2019

Microtensile bond strength between a quartz fiber post and a resin cement: effect of post surface conditioning.

artículo científico publicado en 2006

Microtensile bond strength between indirect composite resin inlays and dentin: effect of cementation strategy and mechanical aging

artículo científico publicado en 2014

Microtensile bond strength of a repair composite to leucite-reinforced feldspathic ceramic.

artículo científico publicado en 2007

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

scientific article published on 26 December 2006

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.

artículo científico publicado en 2005

Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia before and after aging

artículo científico publicado en 2007

Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post.

artículo científico publicado en 2005

Microtensile bond strength of photoactivated and autopolymerized adhesive systems to root dentin using translucent and opaque fiber-reinforced composite posts

artículo científico publicado en 2007

Multi-step adhesive cementation versus one-step adhesive cementation: push-out bond strength between fiber post and root dentin before and after mechanical cycling

artículo científico publicado en 2011

Newer vs. older CAD/CAM burs: Influence of bur experience on the fatigue behavior of adhesively cemented simplified lithium-disilicate glass-ceramic restorations

scientific article published on 09 April 2019

One-step ceramic primer as surface conditioner: Effect on the load-bearing capacity under fatigue of bonded lithium disilicate ceramic simplified restorations

artículo científico publicado en 2020

Optical devices for the detection of cyanide in water based on ethyl(hydroxyethyl)cellulose functionalized with perichromic dyes.

artículo científico publicado en 2016

Optimization of two-joint arm movements: a model technique or a result of natural selection?

artículo científico publicado en 2005

Photophysical Behavior of Isocyanine/Clay Hybrids in the Solid State †.

artículo científico publicado en 2017

Pilot evaluation of four experimental conditioning treatments to improve the bond strength between resin cement and Y-TZP ceramic

scientific article published on 01 February 2011

Polishing methods of an alumina-reinforced feldspar ceramic.

artículo científico publicado en 2006

Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior

scientific article published on 01 September 2018

Preliminary results of the survival and fracture load of roots restored with intracanal posts: weakened vs nonweakened roots

artículo científico publicado en 2014

Pressable feldspathic inlays in premolars: effect of cementation strategy and mechanical cycling on the adhesive bond between dentin and restoration

artículo científico publicado en 2014

Resin Bonding to a Hybrid Ceramic: Effects of Surface Treatments and Aging

artículo científico publicado en 2015

Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability.

artículo científico publicado en 2011

Resin bonding to root canal dentin: effect of the application of an experimental hydrophobic resin coating after an all-in-one adhesive.

artículo científico publicado en 2008

Resin microtensile bond strength to feldspathic ceramic: hydrofluoric acid etching vs. tribochemical silica coating

artículo científico publicado en 2007

Retentive Strength of Y-TZP Crowns: Comparison of Different Silica Coating Methods on the Intaglio Surfaces.

artículo científico publicado en 2017

Root canal filling: fracture strength of fiber-reinforced composite-restored roots and finite element analysis.

artículo científico publicado en 2013

SEM evaluation of in situ early bacterial colonization on a Y-TZP ceramic: a pilot study

article

Sequential usage of diamond bur for CAD/CAM milling: Effect on the roughness, topography and fatigue strength of lithium disilicate glass ceramic

scientific article published on 27 December 2018

Shear bond strength of resin cement bonded to alumina ceramic after treatment by aluminum oxide sandblasting or silica coating

artículo científico publicado en 2011

Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals

artículo científico publicado en 2018

Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties

scientific article published on 11 April 2020

Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica

scientific article published on 01 January 2020

Strength of a Zirconia-Reinforced Lithium Silicate Ceramic: Acid-Etching Time and Resin Cement Application Effects

artículo científico publicado en 2019

Strength of a feldspar ceramic according to the thickness and polymerization mode of the resin cement coating

artículo científico publicado en 2011

Surface Treatments of Zirconia to Enhance Bonding Durability

artículo científico publicado en 2015

Surface conditioning of a composite used for inlay/onlay restorations: effect on muTBS to resin cement.

artículo científico publicado en 2007

Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic.

artículo científico publicado en 2016

Surface roughness and bacterial adherence to resin composites and ceramics.

artículo científico publicado en 2009

Surface treatments of a glass-fiber reinforced composite: Effect on the adhesion to a composite resin

scientific article published on 09 November 2019

Survival rate and load to failure of premolars restored with inlays: An evaluation of different inlay fabrication methods

Survival rate, load to fracture, and finite element analysis of incisors and canines restored with ceramic veneers having varied preparation design

scientific article published on 06 February 2014

Surviving of bovine teeth adhesively restored with 3 types of fiber post after fatigue resistance

artículo científico publicado en 2011

The Disk-Specimen Thickness Does Not Influence the Push-Out Bond Strength Results Between Fiber Post and Root Dentin

The Influence of Ceramic Re-pressing on Surface Properties, Bond Strength, and Color Stability of Leucite Ceramic

artículo científico publicado en 2018

The effect of adhesive systems on the pullout strength of a fiberglass-reinforced composite post system in bovine teeth

artículo científico publicado en 2005

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

artículo científico publicado en 2005

The effect of grinding on the mechanical behavior of Y-TZP ceramics: A systematic review and meta-analyses.

artículo científico publicado en 2016

The effect of hydrofluoric acid concentration on the fatigue failure load of adhesively cemented feldspathic ceramic discs.

artículo científico publicado en 2018

The effect of mechanical loading on the cusp defection of premolars restored with direct and indirect techniques.

artículo científico publicado en 2014

The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system.

artículo científico publicado en 2011

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns.

artículo científico publicado en 2007

The potential of novel primers and universal adhesives to bond to zirconia.

artículo científico publicado en 2013

Tribochemical Glass Ceramic Coating as a New Approach for Resin Adhesion to Zirconia

artículo científico publicado en 2016

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

artículo científico publicado en 2008

[Effect of surface treatment of a glass-infiltrated alumina ceramic on the microtensile bond strength]

artículo científico publicado en 2003

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda