Lista de obras - Antonius Rohlmann - Dominio Público Uruguay

A comparison of hip joint forces in sheep, dog and man

scientific article published on 01 January 1984

A non-optimized follower load path may cause considerable intervertebral rotations.

artículo científico publicado en 2010

A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses ⬇️

artículo científico publicado el 1 de enero de 1988

A novel system for the dynamic assessment of back shape.

artículo científico publicado en 2010

A spinal fixation device for in vivo load measurement.

artículo científico publicado en 1994

Activities of everyday life with high spinal loads

artículo científico publicado en 2014

Age-related loss of lumbar spinal lordosis and mobility--a study of 323 asymptomatic volunteers

artículo científico publicado en 2014

An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces

scientific article published on 05 October 2011

An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column

artículo científico publicado en 2006

Analysis of simulated single ligament transection on the mechanical behaviour of a lumbar functional spinal unit.

artículo científico publicado en 2004

Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method.

artículo científico publicado en 2005

Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus

scientific article published on 24 January 2006

Applying a follower load delivers realistic results for simulating standing.

artículo científico publicado en 2009

Biomechanical behavior of MRI-signal-inducing bone cements after vertebroplasty in osteoporotic vertebral bodies: An experimental cadaver study.

artículo científico publicado en 2014

Braces do not reduce loads on internal spinal fixation devices.

artículo científico publicado en 1999

Changes in the loads on an internal spinal fixator after iliac-crest autograft

artículo científico publicado en 2000

Comparative evaluation of a novel measurement tool to assess lumbar spine posture and range of motion.

artículo científico publicado en 2012

Comparison of four reconstruction methods after total sacrectomy: a finite element study

artículo científico publicado en 2012

Comparison of intradiscal pressures and spinal fixator loads for different body positions and exercises.

artículo científico publicado en 2001

Comparison of loads on internal spinal fixation devices measured in vitro and in vivo.

artículo científico publicado en 1997

Comparison of the effects of bilateral posterior dynamic and rigid fixation devices on the loads in the lumbar spine: a finite element analysis.

artículo científico publicado en 2007

Comparison of the mechanical behavior of the lumbar spine following mono- and bisegmental stabilization

scientific article published on 01 July 2002

Computational biomechanics of a lumbar motion segment in pure and combined shear loads

artículo científico publicado en 2013

Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses.

artículo científico publicado en 2013

Critical comment on the work of G. Ritter et al.: "Elastic strapping of hip joint prosthesis". (Arch. orthop. Unfall-Chir. 86, 1-14 (1976))

artículo científico publicado el 26 de agosto de 1977

Determination of trunk muscle forces for flexion and extension by using a validated finite element model of the lumbar spine and measured in vivo data

artículo científico publicado en 2005

Different arm positions and the shape of the thoracic spine can explain contradictory results in the literature about spinal loads for sitting and standing.

artículo científico publicado en 2010

Discrepancies in anthropometric parameters between different models affect intervertebral rotations when loading finite element models with muscle forces from inverse static analyses

artículo científico publicado en 2014

ESB Clinical Biomechanics Award 2008: Complete data of total knee replacement loading for level walking and stair climbing measured in vivo with a follow-up of 6-10 months

artículo científico publicado en 2009

Effect of a pedicle-screw-based motion preservation system on lumbar spine biomechanics: a probabilistic finite element study with subsequent sensitivity analysis

artículo científico publicado en 2010

Effect of a posterior dynamic implant adjacent to a rigid spinal fixator

artículo científico publicado en 2006

Effect of an internal fixator and a bone graft on intersegmental spinal motion and intradiscal pressure in the adjacent regions.

artículo científico publicado en 2001

Effect of an interspinous implant on loads in the lumbar spine

artículo científico publicado en 2005

Effect of an orthosis on the loads acting on a vertebral body replacement.

artículo científico publicado en 2013

Effect of bone graft characteristics on the mechanical behavior of the lumbar spine.

artículo científico publicado en 2002

Effect of clamping tensile strength on load distribution in paired mounted spinal internal fixators

scientific article published on 01 May 1994

Effect of different surgical strategies on screw forces after correction of scoliosis with a VDS implant.

artículo científico publicado en 2005

Effect of position and height of a mobile core type artificial disc on the biomechanical behaviour of the lumbar spine.

artículo científico publicado en 2008

Effect of total disc replacement with ProDisc on intersegmental rotation of the lumbar spine

artículo científico publicado en 2005

Effects of fusion-bone stiffness on the mechanical behavior of the lumbar spine after vertebral body replacement

artículo científico publicado en 2005

Effects of stem design and material properties on stresses in hip endoprostheses.

artículo científico publicado en 1987

Effects of the rib cage on thoracic spine flexibility.

artículo científico publicado en 2005

Estimation of muscle forces in the lumbar spine during upper-body inclination

scientific article published on 01 January 2001

Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices

artículo científico publicado en 1999

Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis

artículo científico publicado en 1983

Finite-element-analysis and experimental investigation of stresses in a femur

scientific article published on 01 July 1982

Frictional heating of total hip implants. Part 1: measurements in patients.

artículo científico publicado en 2001

Frictional heating of total hip implants. Part 2: finite element study

scientific article published on 01 April 2001

High-tech hip implant for wireless temperature measurements in vivo.

artículo científico publicado en 2012

Hip contact forces and gait patterns from routine activities.

artículo científico publicado en 2001

Hip endoprosthesis for in vivo measurement of joint force and temperature

artículo científico publicado en 1999

Hip joint contact forces during stumbling

artículo científico publicado en 2003

Hip joint loading during walking and running, measured in two patients.

artículo científico publicado en 1993

How does the way a weight is carried affect spinal loads?

artículo científico publicado en 2014

ISSLS prize winner: A novel approach to determine trunk muscle forces during flexion and extension: a comparison of data from an in vitro experiment and in vivo measurements.

artículo científico publicado en 2003

Implantable 9-channel telemetry system for in vivo load measurements with orthopedic implants

artículo científico publicado en 2007

In vivo gleno-humeral joint loads during forward flexion and abduction

artículo científico publicado en 2011

In vivo glenohumeral contact forces--measurements in the first patient 7 months postoperatively.

artículo científico publicado en 2006

In vivo implant forces acting on a vertebral body replacement during upper body flexion.

artículo científico publicado en 2015

In vivo measurement of shoulder joint loads during activities of daily living.

artículo científico publicado en 2009

In vivo measurement of shoulder joint loads during walking with crutches.

artículo científico publicado en 2012

In vivo measurements of the effect of whole body vibration on spinal loads

artículo científico publicado en 2013

Influence of a follower load on intradiscal pressure and intersegmental rotation of the lumbar spine.

artículo científico publicado en 2001

Influence of a screw with a hinge on the pull-out force at the cranial end vertebra in ventral derotation spondylodesis (VDS).

artículo científico publicado en 2003

Influence of different artificial disc kinematics on spine biomechanics.

artículo científico publicado en 2009

Influence of graded facetectomy and laminectomy on spinal biomechanics ⬇️

artículo científico publicado el 26 de abril de 2003

Influence of ligament stiffness on the mechanical behavior of a functional spinal unit

artículo científico publicado en 2004

Influence of load carrying on loads in internal spinal fixators.

artículo científico publicado en 2000

Influence of muscle forces on loads in internal spinal fixation devices

artículo científico publicado en 1998

Internal spinal fixator stiffness has only a minor influence on stresses in the adjacent discs.

artículo científico publicado en 1999

Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis

artículo científico publicado en 2014

Is it possible to simulate physiologic loading conditions by applying pure moments? A comparison of in vivo and in vitro load components in an internal fixator

artículo científico publicado en 2001

Large sizes of vertebral body replacement do not reduce the contact pressure on adjacent vertebral bodies per se

artículo científico publicado en 2009

Loading of the knee joint during activities of daily living measured in vivo in five subjects

artículo científico publicado en 2010

Loading of the knee joint during ergometer cycling: telemetric in vivo data

artículo científico publicado en 2012

Loads on a telemeterized vertebral body replacement measured in three patients within the first postoperative month

artículo científico publicado en 2007

Loads on a telemeterized vertebral body replacement measured in two patients.

artículo científico publicado en 2008

Loads on a vertebral body replacement during locomotion measured in vivo.

artículo científico publicado en 2013

Loads on an internal spinal fixation device during sitting.

artículo científico publicado en 2001

Loads on internal spinal fixators measured in different body positions

artículo científico publicado en 1999

Lumbar spinal loads vary with body height and weight

artículo científico publicado en 2012

Material properties of femoral cancellous bone in axial loading. Part I: Time independent properties

scientific article published on 01 January 1980

Material properties of femoral cancellous bone in axial loading. Part II: Time dependent properties

artículo científico publicado en 1980

Measured loads on a vertebral body replacement during sitting

artículo científico publicado en 2011

Measurement of shoulder joint loads during wheelchair propulsion measured in vivo

artículo científico publicado en 2011

Measurement of the number of lumbar spinal movements in the sagittal plane in a 24-hour period

artículo científico publicado en 2014

Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. IV. Tensile fatigue strength (author's transl)

scientific article published on 01 February 1977

Monitoring the load on a telemeterised vertebral body replacement for a period of up to 65 months

artículo científico publicado en 2013

Multichannel strain gauge telemetry for orthopaedic implants.

artículo científico publicado en 1988

Optimal stiffness of a pedicle-screw-based motion preservation implant for the lumbar spine ⬇️

artículo científico publicado el 20 de octubre de 2011

Optimised in vitro applicable loads for the simulation of lateral bending in the lumbar spine.

artículo científico publicado en 2012

Optimised loads for the simulation of axial rotation in the lumbar spine

artículo científico publicado en 2011

Parameters influencing the outcome after total disc replacement at the lumbosacral junction. Part 2: distraction and posterior translation lead to clinical failure after a mean follow-up of 5 years.

artículo científico publicado en 2013

Pedicle-screw-based dynamic implants may increase posterior intervertebral disc bulging during flexion

artículo científico publicado en 2011

Placing a bone graft more posteriorly may reduce the risk of pedicle screw breakage: analysis of an unexpected case of pedicle screw breakage

scientific article published on 01 August 1998

Realistic loads for testing hip implants.

artículo científico publicado en 2010

Spinal load changes during rotatory dynamic sitting

artículo científico publicado en 2000

Spinal loads after osteoporotic vertebral fractures treated by vertebroplasty or kyphoplasty

artículo científico publicado en 2005

Spinal loads as influenced by external loads: a combined in vivo and in silico investigation.

artículo científico publicado en 2015

Spinal loads during cycling on an ergometer.

artículo científico publicado en 2014

Spinal loads during position changes

artículo científico publicado en 2012

Spinal loads during post-operative physiotherapeutic exercises

artículo científico publicado en 2014

Spinal muscles can create compressive follower loads in the lumbar spine in a neutral standing posture

scientific article published on 15 December 2010

Standardized loads acting in knee implants

artículo científico publicado en 2014

The effect of design parameters of dynamic pedicle screw systems on kinematics and load bearing: an in vitro study ⬇️

artículo científico publicado el 26 de noviembre de 2010

The effect of design parameters of interspinous implants on kinematics and load bearing: an in vitro study

artículo científico

The risk of disc prolapses with complex loading in different degrees of disc degeneration - a finite element analysis

artículo científico publicado en 2007

Total hip joint prosthesis for in vivo measurement of forces and moments.

artículo científico publicado en 2009

Velocity of lordosis angle during spinal flexion and extension

artículo científico publicado en 2012

Which postures are most suitable in assessing spinal fusion using radiostereometric analysis?

artículo científico publicado en 2011

[Analysis of load studies of the spine]

scientific article published on 01 January 1997

[Biomechanical consequences of variations in artificial disc positioning. A finite element study on the lumbar spine].

artículo científico publicado en 2007

[Effect of a double intervertebral cage on the mechanical behavior of the lumbar spine].

artículo científico publicado en 2002

[Effect of implants for replacement of a vertebral body on the mechanical function of the lumbar spine]

artículo científico publicado en 2002

[Effect of vertebral body stiffness before and after vertebroplasty on intradiscal pressure]

artículo científico publicado en 2005

[Finite element analysis, its limitations and the relevance of its results to orthopaedic surgery as shown by simultaneous experimental measurements (author's transl)]

scientific article published on 01 January 1980

[Free vascularized bone transplantation in the extremities]

[Loading on internal spinal fixation devices]

artículo científico publicado en 1999

[Reproducibility of surface measurements of the back using the opTRImetric method]

[Signals from the back. Biomechanics of the Berlin Oskar-Helene Home win the renowned 2000 Volvo Prize for Research for telemetric studies of the spine]

artículo científico publicado en 2000

[Spinal load bearing during sitting in an office chair with a tilting back]

artículo científico publicado en 2002

[Stiffening effect of a transsacral fusion system for the lumbosacral junction. A probabilistic finite element analysis and sensitivity study].

artículo científico publicado en 2011

[Stress on the elbow joint following alloplastic joint replacement]

scientific article published on 01 December 1986

[Stresses on the femur following hip joint replacement]

artículo científico publicado en 1983

[The biomechanics of kyphosis]

artículo científico publicado en 2001

[The stresses in femur (author's transl)]

artículo científico publicado en 1981

[The stresses in femur. I. Intact femur without consideration of the iliotibial tract (author's transl)]

artículo científico publicado en 1980

Lista de obras de Antonius Rohlmann

A comparison of hip joint forces in sheep, dog and man

A non-optimized follower load path may cause considerable intervertebral rotations.

A nonlinear finite element analysis of interface conditions in porous coated hip endoprostheses ⬇️

A novel system for the dynamic assessment of back shape.

A spinal fixation device for in vivo load measurement.

Activities of everyday life with high spinal loads

Age-related loss of lumbar spinal lordosis and mobility--a study of 323 asymptomatic volunteers

An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces

An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column

Analysis of simulated single ligament transection on the mechanical behaviour of a lumbar functional spinal unit.

Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method.

Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus

Applying a follower load delivers realistic results for simulating standing.

Biomechanical behavior of MRI-signal-inducing bone cements after vertebroplasty in osteoporotic vertebral bodies: An experimental cadaver study.

Braces do not reduce loads on internal spinal fixation devices.

Changes in the loads on an internal spinal fixator after iliac-crest autograft

Comparative evaluation of a novel measurement tool to assess lumbar spine posture and range of motion.

Comparison of four reconstruction methods after total sacrectomy: a finite element study

Comparison of intradiscal pressures and spinal fixator loads for different body positions and exercises.

Comparison of loads on internal spinal fixation devices measured in vitro and in vivo.

Comparison of the effects of bilateral posterior dynamic and rigid fixation devices on the loads in the lumbar spine: a finite element analysis.

Comparison of the mechanical behavior of the lumbar spine following mono- and bisegmental stabilization

Computational biomechanics of a lumbar motion segment in pure and combined shear loads

Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses.

Critical comment on the work of G. Ritter et al.: "Elastic strapping of hip joint prosthesis". (Arch. orthop. Unfall-Chir. 86, 1-14 (1976))

Determination of trunk muscle forces for flexion and extension by using a validated finite element model of the lumbar spine and measured in vivo data

Different arm positions and the shape of the thoracic spine can explain contradictory results in the literature about spinal loads for sitting and standing.

Discrepancies in anthropometric parameters between different models affect intervertebral rotations when loading finite element models with muscle forces from inverse static analyses

ESB Clinical Biomechanics Award 2008: Complete data of total knee replacement loading for level walking and stair climbing measured in vivo with a follow-up of 6-10 months

Effect of a pedicle-screw-based motion preservation system on lumbar spine biomechanics: a probabilistic finite element study with subsequent sensitivity analysis

Effect of a posterior dynamic implant adjacent to a rigid spinal fixator

Effect of an internal fixator and a bone graft on intersegmental spinal motion and intradiscal pressure in the adjacent regions.

Effect of an interspinous implant on loads in the lumbar spine

Effect of an orthosis on the loads acting on a vertebral body replacement.

Effect of bone graft characteristics on the mechanical behavior of the lumbar spine.

Effect of clamping tensile strength on load distribution in paired mounted spinal internal fixators

Effect of different surgical strategies on screw forces after correction of scoliosis with a VDS implant.

Effect of position and height of a mobile core type artificial disc on the biomechanical behaviour of the lumbar spine.

Effect of total disc replacement with ProDisc on intersegmental rotation of the lumbar spine

Effects of fusion-bone stiffness on the mechanical behavior of the lumbar spine after vertebral body replacement

Effects of stem design and material properties on stresses in hip endoprostheses.

Effects of the rib cage on thoracic spine flexibility.

Estimation of muscle forces in the lumbar spine during upper-body inclination

Estimation of trunk muscle forces using the finite element method and in vivo loads measured by telemeterized internal spinal fixation devices

Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis

Finite-element-analysis and experimental investigation of stresses in a femur

Frictional heating of total hip implants. Part 1: measurements in patients.

Frictional heating of total hip implants. Part 2: finite element study

High-tech hip implant for wireless temperature measurements in vivo.

Hip contact forces and gait patterns from routine activities.

Hip endoprosthesis for in vivo measurement of joint force and temperature

Hip joint contact forces during stumbling

Hip joint loading during walking and running, measured in two patients.

How does the way a weight is carried affect spinal loads?

ISSLS prize winner: A novel approach to determine trunk muscle forces during flexion and extension: a comparison of data from an in vitro experiment and in vivo measurements.

Implantable 9-channel telemetry system for in vivo load measurements with orthopedic implants

In vivo gleno-humeral joint loads during forward flexion and abduction

In vivo glenohumeral contact forces--measurements in the first patient 7 months postoperatively.

In vivo implant forces acting on a vertebral body replacement during upper body flexion.

In vivo measurement of shoulder joint loads during activities of daily living.

In vivo measurement of shoulder joint loads during walking with crutches.

In vivo measurements of the effect of whole body vibration on spinal loads

Influence of a follower load on intradiscal pressure and intersegmental rotation of the lumbar spine.

Influence of a screw with a hinge on the pull-out force at the cranial end vertebra in ventral derotation spondylodesis (VDS).

Influence of different artificial disc kinematics on spine biomechanics.

Influence of graded facetectomy and laminectomy on spinal biomechanics ⬇️

Influence of ligament stiffness on the mechanical behavior of a functional spinal unit

Influence of load carrying on loads in internal spinal fixators.

Influence of muscle forces on loads in internal spinal fixation devices

Internal spinal fixator stiffness has only a minor influence on stresses in the adjacent discs.

Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis

Is it possible to simulate physiologic loading conditions by applying pure moments? A comparison of in vivo and in vitro load components in an internal fixator

Large sizes of vertebral body replacement do not reduce the contact pressure on adjacent vertebral bodies per se

Loading of the knee joint during activities of daily living measured in vivo in five subjects

Loading of the knee joint during ergometer cycling: telemetric in vivo data

Loads on a telemeterized vertebral body replacement measured in three patients within the first postoperative month

Loads on a telemeterized vertebral body replacement measured in two patients.

Loads on a vertebral body replacement during locomotion measured in vivo.

Loads on an internal spinal fixation device during sitting.